Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 479 insertions, 0 deletions

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
new file mode 100644
index 00000000..3e538da6
--- /dev/null
+++ b/arch/arm/mach-integrator/impd1.c
@@ -0,0 +1,479 @@
+/*
+ *  linux/arch/arm/mach-integrator/impd1.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file provides the core support for the IM-PD1 module.
+ *
+ * Module / boot parameters.
+ *   lmid=n   impd1.lmid=n - set the logic module position in stack to 'n'
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clkdev.h>
+
+#include <asm/hardware/icst.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
+#include <asm/sizes.h>
+
+static int module_id;
+
+module_param_named(lmid, module_id, int, 0444);
+MODULE_PARM_DESC(lmid, "logic module stack position");
+
+struct impd1_module {
+	void __iomem	*base;
+	struct clk	vcos[2];
+	struct clk_lookup *clks[3];
+};
+
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min		= 12,
+	.vd_max		= 519,
+	.rd_min		= 3,
+	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static void impd1_setvco(struct clk *clk, struct icst_vco vco)
+{
+	struct impd1_module *impd1 = clk->data;
+	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
+
+	writel(0xa05f, impd1->base + IMPD1_LOCK);
+	writel(val, clk->vcoreg);
+	writel(0, impd1->base + IMPD1_LOCK);
+
+#ifdef DEBUG
+	vco.v = val & 0x1ff;
+	vco.r = (val >> 9) & 0x7f;
+	vco.s = (val >> 16) & 7;
+
+	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
+		 vconr, icst525_hz(&impd1_vco_params, vco));
+#endif
+}
+
+static const struct clk_ops impd1_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= impd1_setvco,
+};
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
+{
+	struct impd1_module *impd1 = dev_get_drvdata(dev);
+	u32 cur;
+
+	val &= mask;
+	cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
+	writel(cur | val, impd1->base + IMPD1_CTRL);
+}
+
+EXPORT_SYMBOL(impd1_tweak_control);
+
+/*
+ * CLCD support
+ */
+#define PANEL		PROSPECTOR
+
+#define LTM10C209		1
+#define PROSPECTOR		2
+#define SVGA			3
+#define VGA			4
+
+#if PANEL == VGA
+#define PANELTYPE	vga
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.connector	= IMPD1_CTRL_DISP_VGA,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == SVGA
+#define PANELTYPE	svga
+static struct clcd_panel svga = {
+	.mode		= {
+		.name		= "SVGA",
+		.refresh	= 0,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 27778,
+		.left_margin	= 20,
+		.right_margin	= 20,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 164,
+		.vsync_len	= 62,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.connector	= IMPD1_CTRL_DISP_VGA,
+	.caps		= CLCD_CAP_5551,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == PROSPECTOR
+#define PANELTYPE	prospector
+static struct clcd_panel prospector = {
+	.mode		= {
+		.name		= "PROSPECTOR",
+		.refresh	= 0,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 40000,
+		.left_margin	= 33,
+		.right_margin	= 64,
+		.upper_margin	= 36,
+		.lower_margin	= 7,
+		.hsync_len	= 64,
+		.vsync_len	= 25,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.fixedtimings	= 1,
+	.connector	= IMPD1_CTRL_DISP_LCD,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+
+#elif PANEL == LTM10C209
+#define PANELTYPE	ltm10c209
+/*
+ * Untested.
+ */
+static struct clcd_panel ltm10c209 = {
+	.mode		= {
+		.name		= "LTM10C209",
+		.refresh	= 0,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 40000,
+		.left_margin	= 20,
+		.right_margin	= 20,
+		.upper_margin	= 19,
+		.lower_margin	= 19,
+		.hsync_len	= 20,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.fixedtimings	= 1,
+	.connector	= IMPD1_CTRL_DISP_LCD,
+	.bpp		= 16,
+	.grayscale	= 0,
+};
+#endif
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void impd1fb_clcd_disable(struct clcd_fb *fb)
+{
+	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void impd1fb_clcd_enable(struct clcd_fb *fb)
+{
+	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
+			fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
+}
+
+static int impd1fb_clcd_setup(struct clcd_fb *fb)
+{
+	unsigned long framebase = fb->dev->res.start + 0x01000000;
+	unsigned long framesize = SZ_1M;
+	int ret = 0;
+
+	fb->panel = &PANELTYPE;
+
+	if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
+		printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
+		return -EBUSY;
+	}
+
+	fb->fb.screen_base = ioremap(framebase, framesize);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
+		ret = -ENOMEM;
+		goto free_buffer;
+	}
+
+	fb->fb.fix.smem_start	= framebase;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+
+ free_buffer:
+	release_mem_region(framebase, framesize);
+	return ret;
+}
+
+static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	unsigned long start, size;
+
+	start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
+	size = vma->vm_end - vma->vm_start;
+
+	return remap_pfn_range(vma, vma->vm_start, start, size,
+			       vma->vm_page_prot);
+}
+
+static void impd1fb_clcd_remove(struct clcd_fb *fb)
+{
+	iounmap(fb->fb.screen_base);
+	release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static struct clcd_board impd1_clcd_data = {
+	.name		= "IM-PD/1",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_888,
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= impd1fb_clcd_disable,
+	.enable		= impd1fb_clcd_enable,
+	.setup		= impd1fb_clcd_setup,
+	.mmap		= impd1fb_clcd_mmap,
+	.remove		= impd1fb_clcd_remove,
+};
+
+struct impd1_device {
+	unsigned long	offset;
+	unsigned int	irq[2];
+	unsigned int	id;
+	void		*platform_data;
+};
+
+static struct impd1_device impd1_devs[] = {
+	{
+		.offset	= 0x03000000,
+		.id	= 0x00041190,
+	}, {
+		.offset	= 0x00100000,
+		.irq	= { 1 },
+		.id	= 0x00141011,
+	}, {
+		.offset	= 0x00200000,
+		.irq	= { 2 },
+		.id	= 0x00141011,
+	}, {
+		.offset	= 0x00300000,
+		.irq	= { 3 },
+		.id	= 0x00041022,
+	}, {
+		.offset	= 0x00400000,
+		.irq	= { 4 },
+		.id	= 0x00041061,
+	}, {
+		.offset	= 0x00500000,
+		.irq	= { 5 },
+		.id	= 0x00041061,
+	}, {
+		.offset	= 0x00600000,
+		.irq	= { 6 },
+		.id	= 0x00041130,
+	}, {
+		.offset	= 0x00700000,
+		.irq	= { 7, 8 },
+		.id	= 0x00041181,
+	}, {
+		.offset	= 0x00800000,
+		.irq	= { 9 },
+		.id	= 0x00041041,
+	}, {
+		.offset	= 0x01000000,
+		.irq	= { 11 },
+		.id	= 0x00041110,
+		.platform_data = &impd1_clcd_data,
+	}
+};
+
+static struct clk fixed_14745600 = {
+	.rate = 14745600,
+};
+
+static int impd1_probe(struct lm_device *dev)
+{
+	struct impd1_module *impd1;
+	int i, ret;
+
+	if (dev->id != module_id)
+		return -EINVAL;
+
+	if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
+		return -EBUSY;
+
+	impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
+	if (!impd1) {
+		ret = -ENOMEM;
+		goto release_lm;
+	}
+
+	impd1->base = ioremap(dev->resource.start, SZ_4K);
+	if (!impd1->base) {
+		ret = -ENOMEM;
+		goto free_impd1;
+	}
+
+	lm_set_drvdata(dev, impd1);
+
+	printk("IM-PD1 found at 0x%08lx\n",
+		(unsigned long)dev->resource.start);
+
+	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+		impd1->vcos[i].ops = &impd1_clk_ops,
+		impd1->vcos[i].owner = THIS_MODULE,
+		impd1->vcos[i].params = &impd1_vco_params,
+		impd1->vcos[i].data = impd1;
+	}
+	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
+	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
+
+	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
+					dev->id);
+	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
+					dev->id);
+	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
+					dev->id);
+	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
+		clkdev_add(impd1->clks[i]);
+
+	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
+		struct impd1_device *idev = impd1_devs + i;
+		struct amba_device *d;
+		unsigned long pc_base;
+
+		pc_base = dev->resource.start + idev->offset;
+
+		d = amba_device_alloc(NULL, pc_base, SZ_4K);
+		if (!d)
+			continue;
+
+		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
+		d->dev.parent	= &dev->dev;
+		d->irq[0]	= dev->irq;
+		d->irq[1]	= dev->irq;
+		d->periphid	= idev->id;
+		d->dev.platform_data = idev->platform_data;
+
+		ret = amba_device_add(d, &dev->resource);
+		if (ret) {
+			dev_err(&d->dev, "unable to register device: %d\n", ret);
+			amba_device_put(d);
+		}
+	}
+
+	return 0;
+
+ free_impd1:
+	if (impd1 && impd1->base)
+		iounmap(impd1->base);
+	kfree(impd1);
+ release_lm:
+	release_mem_region(dev->resource.start, SZ_4K);
+	return ret;
+}
+
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
+static void impd1_remove(struct lm_device *dev)
+{
+	struct impd1_module *impd1 = lm_get_drvdata(dev);
+	int i;
+
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
+
+	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
+		clkdev_drop(impd1->clks[i]);
+
+	lm_set_drvdata(dev, NULL);
+
+	iounmap(impd1->base);
+	kfree(impd1);
+	release_mem_region(dev->resource.start, SZ_4K);
+}
+
+static struct lm_driver impd1_driver = {
+	.drv = {
+		.name	= "impd1",
+	},
+	.probe		= impd1_probe,
+	.remove		= impd1_remove,
+};
+
+static int __init impd1_init(void)
+{
+	return lm_driver_register(&impd1_driver);
+}
+
+static void __exit impd1_exit(void)
+{
+	lm_driver_unregister(&impd1_driver);
+}
+
+module_init(impd1_init);
+module_exit(impd1_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
+MODULE_AUTHOR("Deep Blue Solutions Ltd");