Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 333 insertions, 0 deletions

diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
new file mode 100644
index 00000000..6f806869
--- /dev/null
+++ b/arch/arm/mach-ebsa110/core.c
@@ -0,0 +1,333 @@
+/*
+ *  linux/arch/arm/mach-ebsa110/core.c
+ *
+ *  Copyright (C) 1998-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Extra MM routines for the EBSA-110 architecture
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/serial_8250.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system_misc.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <asm/mach/time.h>
+
+#include "core.h"
+
+static void ebsa110_mask_irq(struct irq_data *d)
+{
+	__raw_writeb(1 << d->irq, IRQ_MCLR);
+}
+
+static void ebsa110_unmask_irq(struct irq_data *d)
+{
+	__raw_writeb(1 << d->irq, IRQ_MSET);
+}
+
+static struct irq_chip ebsa110_irq_chip = {
+	.irq_ack	= ebsa110_mask_irq,
+	.irq_mask	= ebsa110_mask_irq,
+	.irq_unmask	= ebsa110_unmask_irq,
+};
+ 
+static void __init ebsa110_init_irq(void)
+{
+	unsigned long flags;
+	unsigned int irq;
+
+	local_irq_save(flags);
+	__raw_writeb(0xff, IRQ_MCLR);
+	__raw_writeb(0x55, IRQ_MSET);
+	__raw_writeb(0x00, IRQ_MSET);
+	if (__raw_readb(IRQ_MASK) != 0x55)
+		while (1);
+	__raw_writeb(0xff, IRQ_MCLR);	/* clear all interrupt enables */
+	local_irq_restore(flags);
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
+					 handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+static struct map_desc ebsa110_io_desc[] __initdata = {
+	/*
+	 * sparse external-decode ISAIO space
+	 */
+	{	/* IRQ_STAT/IRQ_MCLR */
+		.virtual	= IRQ_STAT,
+		.pfn		= __phys_to_pfn(TRICK4_PHYS),
+		.length		= TRICK4_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* IRQ_MASK/IRQ_MSET */
+		.virtual	= IRQ_MASK,
+		.pfn		= __phys_to_pfn(TRICK3_PHYS),
+		.length		= TRICK3_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* SOFT_BASE */
+		.virtual	= SOFT_BASE,
+		.pfn		= __phys_to_pfn(TRICK1_PHYS),
+		.length		= TRICK1_SIZE,
+		.type		= MT_DEVICE
+	}, {	/* PIT_BASE */
+		.virtual	= PIT_BASE,
+		.pfn		= __phys_to_pfn(TRICK0_PHYS),
+		.length		= TRICK0_SIZE,
+		.type		= MT_DEVICE
+	},
+
+	/*
+	 * self-decode ISAIO space
+	 */
+	{
+		.virtual	= ISAIO_BASE,
+		.pfn		= __phys_to_pfn(ISAIO_PHYS),
+		.length		= ISAIO_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= ISAMEM_BASE,
+		.pfn		= __phys_to_pfn(ISAMEM_PHYS),
+		.length		= ISAMEM_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init ebsa110_map_io(void)
+{
+	iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
+}
+
+static void __iomem *ebsa110_ioremap_caller(unsigned long cookie, size_t size,
+					    unsigned int flags, void *caller)
+{
+	return (void __iomem *)cookie;
+}
+
+static void ebsa110_iounmap(volatile void __iomem *io_addr)
+{}
+
+static void __init ebsa110_init_early(void)
+{
+	arch_ioremap_caller = ebsa110_ioremap_caller;
+	arch_iounmap = ebsa110_iounmap;
+}
+
+#define PIT_CTRL		(PIT_BASE + 0x0d)
+#define PIT_T2			(PIT_BASE + 0x09)
+#define PIT_T1			(PIT_BASE + 0x05)
+#define PIT_T0			(PIT_BASE + 0x01)
+
+/*
+ * This is the rate at which your MCLK signal toggles (in Hz)
+ * This was measured on a 10 digit frequency counter sampling
+ * over 1 second.
+ */
+#define MCLK	47894000
+
+/*
+ * This is the rate at which the PIT timers get clocked
+ */
+#define CLKBY7	(MCLK / 7)
+
+/*
+ * This is the counter value.  We tick at 200Hz on this platform.
+ */
+#define COUNT	((CLKBY7 + (HZ / 2)) / HZ)
+
+/*
+ * Get the time offset from the system PIT.  Note that if we have missed an
+ * interrupt, then the PIT counter will roll over (ie, be negative).
+ * This actually works out to be convenient.
+ */
+static unsigned long ebsa110_gettimeoffset(void)
+{
+	unsigned long offset, count;
+
+	__raw_writeb(0x40, PIT_CTRL);
+	count = __raw_readb(PIT_T1);
+	count |= __raw_readb(PIT_T1) << 8;
+
+	/*
+	 * If count > COUNT, make the number negative.
+	 */
+	if (count > COUNT)
+		count |= 0xffff0000;
+
+	offset = COUNT;
+	offset -= count;
+
+	/*
+	 * `offset' is in units of timer counts.  Convert
+	 * offset to units of microseconds.
+	 */
+	offset = offset * (1000000 / HZ) / COUNT;
+
+	return offset;
+}
+
+static irqreturn_t
+ebsa110_timer_interrupt(int irq, void *dev_id)
+{
+	u32 count;
+
+	/* latch and read timer 1 */
+	__raw_writeb(0x40, PIT_CTRL);
+	count = __raw_readb(PIT_T1);
+	count |= __raw_readb(PIT_T1) << 8;
+
+	count += COUNT;
+
+	__raw_writeb(count & 0xff, PIT_T1);
+	__raw_writeb(count >> 8, PIT_T1);
+
+	timer_tick();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ebsa110_timer_irq = {
+	.name		= "EBSA110 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= ebsa110_timer_interrupt,
+};
+
+/*
+ * Set up timer interrupt.
+ */
+static void __init ebsa110_timer_init(void)
+{
+	/*
+	 * Timer 1, mode 2, LSB/MSB
+	 */
+	__raw_writeb(0x70, PIT_CTRL);
+	__raw_writeb(COUNT & 0xff, PIT_T1);
+	__raw_writeb(COUNT >> 8, PIT_T1);
+
+	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
+}
+
+static struct sys_timer ebsa110_timer = {
+	.init		= ebsa110_timer_init,
+	.offset		= ebsa110_gettimeoffset,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.iobase		= 0x3f8,
+		.irq		= 1,
+		.uartclk	= 1843200,
+		.regshift	= 0,
+		.iotype		= UPIO_PORT,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{
+		.iobase		= 0x2f8,
+		.irq		= 2,
+		.uartclk	= 1843200,
+		.regshift	= 0,
+		.iotype		= UPIO_PORT,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static struct resource am79c961_resources[] = {
+	{
+		.start		= 0x220,
+		.end		= 0x238,
+		.flags		= IORESOURCE_IO,
+	}, {
+		.start		= IRQ_EBSA110_ETHERNET,
+		.end		= IRQ_EBSA110_ETHERNET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am79c961_device = {
+	.name			= "am79c961",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(am79c961_resources),
+	.resource		= am79c961_resources,
+};
+
+static struct platform_device *ebsa110_devices[] = {
+	&serial_device,
+	&am79c961_device,
+};
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+static int __init ebsa110_init(void)
+{
+	arm_pm_idle = ebsa110_idle;
+	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
+}
+
+arch_initcall(ebsa110_init);
+
+static void ebsa110_restart(char mode, const char *cmd)
+{
+	soft_restart(0x80000000);
+}
+
+MACHINE_START(EBSA110, "EBSA110")
+	/* Maintainer: Russell King */
+	.atag_offset	= 0x400,
+	.reserve_lp0	= 1,
+	.reserve_lp2	= 1,
+	.restart_mode	= 's',
+	.map_io		= ebsa110_map_io,
+	.init_early	= ebsa110_init_early,
+	.init_irq	= ebsa110_init_irq,
+	.timer		= &ebsa110_timer,
+	.restart	= ebsa110_restart,
+MACHINE_END