Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 421 insertions, 0 deletions

diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
new file mode 100644
index 00000000..7534c603
--- /dev/null
+++ b/Documentation/isdn/README.gigaset
@@ -0,0 +1,421 @@
+GigaSet 307x Device Driver
+==========================
+
+1.   Requirements
+     ------------
+1.1. Hardware
+     --------
+     This driver supports the connection of the Gigaset 307x/417x family of
+     ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
+     connection. The following devices are reported to be compatible:
+
+     Bases:
+        Siemens Gigaset 3070/3075 isdn
+        Siemens Gigaset 4170/4175 isdn
+        Siemens Gigaset SX205/255
+        Siemens Gigaset SX353
+        T-Com Sinus 45 [AB] isdn
+        T-Com Sinus 721X[A] [SE]
+        Vox Chicago 390 ISDN (KPN Telecom)
+
+     RS232 data boxes:
+        Siemens Gigaset M101 Data
+        T-Com Sinus 45 Data 1
+
+     USB data boxes:
+        Siemens Gigaset M105 Data
+        Siemens Gigaset USB Adapter DECT
+        T-Com Sinus 45 Data 2
+        T-Com Sinus 721 data
+        Chicago 390 USB (KPN)
+
+     See also http://www.erbze.info/sinus_gigaset.htm and
+              http://gigaset307x.sourceforge.net/
+
+     We had also reports from users of Gigaset M105 who could use the drivers
+     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
+     If you have another device that works with our driver, please let us know.
+
+     Chances of getting an USB device to work are good if the output of
+        lsusb
+     at the command line contains one of the following:
+        ID 0681:0001
+        ID 0681:0002
+        ID 0681:0009
+        ID 0681:0021
+        ID 0681:0022
+
+1.2. Software
+     --------
+     The driver works with the Kernel CAPI subsystem as well as the old
+     ISDN4Linux subsystem, so it can be used with any software which is able
+     to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
+
+     There are some user space tools available at
+     http://sourceforge.net/projects/gigaset307x/
+     which provide access to additional device specific functions like SMS,
+     phonebook or call journal.
+
+
+2.   How to use the driver
+     ---------------------
+2.1. Modules
+     -------
+     For the devices to work, the proper kernel modules have to be loaded.
+     This normally happens automatically when the system detects the USB
+     device (base, M105) or when the line discipline is attached (M101). It
+     can also be triggered manually using the modprobe(8) command, for example
+     for troubleshooting or to pass module parameters.
+
+     The module ser_gigaset provides a serial line discipline N_GIGASET_M101
+     which uses the regular serial port driver to access the device, and must
+     therefore be attached to the serial device to which the M101 is connected.
+     The ldattach(8) command (included in util-linux-ng release 2.14 or later)
+     can be used for that purpose, for example:
+	ldattach GIGASET_M101 /dev/ttyS1
+     This will open the device file, attach the line discipline to it, and
+     then sleep in the background, keeping the device open so that the line
+     discipline remains active. To deactivate it, kill the daemon, for example
+     with
+	killall ldattach
+     before disconnecting the device. To have this happen automatically at
+     system startup/shutdown on an LSB compatible system, create and activate
+     an appropriate LSB startup script /etc/init.d/gigaset. (The init name
+     'gigaset' is officially assigned to this project by LANANA.)
+     Alternatively, just add the 'ldattach' command line to /etc/rc.local.
+
+     The modules accept the following parameters:
+
+	Module	 	Parameter  Meaning
+
+	gigaset	 	debug	   debug level (see section 3.2.)
+
+			startmode  initial operation mode (see section 2.5.):
+	bas_gigaset )		   1=ISDN4linux/CAPI (default), 0=Unimodem
+	ser_gigaset )
+	usb_gigaset )	cidmode    initial Call-ID mode setting (see section
+				   2.5.): 1=on (default), 0=off
+
+     Depending on your distribution you may want to create a separate module
+     configuration file like /etc/modprobe.d/gigaset.conf for these.
+
+2.2. Device nodes for user space programs
+     ------------------------------------
+     The device can be accessed from user space (eg. by the user space tools
+     mentioned in 1.2.) through the device nodes:
+
+     - /dev/ttyGS0 for M101 (RS232 data boxes)
+     - /dev/ttyGU0 for M105 (USB data boxes)
+     - /dev/ttyGB0 for the base driver (direct USB connection)
+
+     If you connect more than one device of a type, they will get consecutive
+     device nodes, eg. /dev/ttyGU1 for a second M105.
+
+     You can also set a "default device" for the user space tools to use when
+     no device node is given as parameter, by creating a symlink /dev/ttyG to
+     one of them, eg.:
+
+	ln -s /dev/ttyGB0 /dev/ttyG
+
+     The devices accept the following device specific ioctl calls
+     (defined in gigaset_dev.h):
+
+     ioctl(int fd, GIGASET_REDIR, int *cmd);
+     If cmd==1, the device is set to be controlled exclusively through the
+     character device node; access from the ISDN subsystem is blocked.
+     If cmd==0, the device is set to be used from the ISDN subsystem and does
+     not communicate through the character device node.
+
+     ioctl(int fd, GIGASET_CONFIG, int *cmd);
+     (ser_gigaset and usb_gigaset only)
+     If cmd==1, the device is set to adapter configuration mode where commands
+     are interpreted by the M10x DECT adapter itself instead of being
+     forwarded to the base station. In this mode, the device accepts the
+     commands described in Siemens document "AT-Kommando Alignment M10x Data"
+     for setting the operation mode, associating with a base station and
+     querying parameters like field strengh and signal quality.
+     Note that there is no ioctl command for leaving adapter configuration
+     mode and returning to regular operation. In order to leave adapter
+     configuration mode, write the command ATO to the device.
+
+     ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);
+     (usb_gigaset only)
+     Set the break characters on an M105's internal serial adapter to the six
+     bytes stored in brkchars[]. Unused bytes should be set to zero.
+
+     ioctl(int fd, GIGASET_VERSION, unsigned version[4]);
+     Retrieve version information from the driver. version[0] must be set to
+     one of:
+     - GIGVER_DRIVER: retrieve driver version
+     - GIGVER_COMPAT: retrieve interface compatibility version
+     - GIGVER_FWBASE: retrieve the firmware version of the base
+     Upon return, version[] is filled with the requested version information.
+
+2.3. CAPI
+     ----
+     If the driver is compiled with CAPI support (kernel configuration option
+     GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
+     corresponding driver module is loaded, and can then be used with CAPI 2.0
+     kernel and user space applications. For user space access, the module
+     capi.ko must be loaded.
+
+     Legacy ISDN4Linux applications are supported via the capidrv
+     compatibility driver. The kernel module capidrv.ko must be loaded
+     explicitly with the command
+        modprobe capidrv
+     if needed, and cannot be unloaded again without unloading the driver
+     first. (These are limitations of capidrv.)
+
+     Most distributions handle loading and unloading of the various CAPI
+     modules automatically via the command capiinit(1) from the capi4k-utils
+     package or a similar mechanism. Note that capiinit(1) cannot unload the
+     Gigaset drivers because it doesn't support more than one module per
+     driver.
+
+2.4. ISDN4Linux
+     ----------
+     If the driver is compiled without CAPI support (native ISDN4Linux
+     variant), it registers the device with the legacy ISDN4Linux subsystem
+     after loading the module. It can then be used with ISDN4Linux
+     applications only. Most distributions provide some configuration utility
+     for setting up that subsystem. Otherwise you can use some HOWTOs like
+         http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
+
+
+2.5. Unimodem mode
+     -------------
+     In this mode the device works like a modem connected to a serial port
+     (the /dev/ttyGU0, ... mentioned above) which understands the commands
+
+         ATZ                 init, reset
+             => OK or ERROR
+         ATD
+         ATDT                dial
+             => OK, CONNECT,
+                BUSY,
+                NO DIAL TONE,
+                NO CARRIER,
+                NO ANSWER
+         <pause>+++<pause>   change to command mode when connected
+         ATH                 hangup
+
+     You can use some configuration tool of your distribution to configure this
+     "modem" or configure pppd/wvdial manually. There are some example ppp
+     configuration files and chat scripts in the gigaset-VERSION/ppp directory
+     in the driver packages from http://sourceforge.net/projects/gigaset307x/.
+     Please note that the USB drivers are not able to change the state of the
+     control lines. This means you must use "Stupid Mode" if you are using
+     wvdial or you should use the nocrtscts option of pppd.
+     You must also assure that the ppp_async module is loaded with the parameter
+     flag_time=0. You can do this e.g. by adding a line like
+
+        options ppp_async flag_time=0
+
+     to an appropriate module configuration file, like
+     /etc/modprobe.d/gigaset.conf.
+
+     Unimodem mode is needed for making some devices [e.g. SX100] work which
+     do not support the regular Gigaset command set. If debug output (see
+     section 3.2.) shows something like this when dialing:
+         CMD Received: ERROR
+         Available Params: 0
+         Connection State: 0, Response: -1
+         gigaset_process_response: resp_code -1 in ConState 0 !
+         Timeout occurred
+     then switching to unimodem mode may help.
+
+     If you have installed the command line tool gigacontr, you can enter
+     unimodem mode using
+         gigacontr --mode unimodem
+     You can switch back using
+         gigacontr --mode isdn
+
+     You can also put the driver directly into Unimodem mode when it's loaded,
+     by passing the module parameter startmode=0 to the hardware specific
+     module, e.g.
+	modprobe usb_gigaset startmode=0
+     or by adding a line like
+	options usb_gigaset startmode=0
+     to an appropriate module configuration file, like
+     /etc/modprobe.d/gigaset.conf
+
+2.6. Call-ID (CID) mode
+     ------------------
+     Call-IDs are numbers used to tag commands to, and responses from, the
+     Gigaset base in order to support the simultaneous handling of multiple
+     ISDN calls. Their use can be enabled ("CID mode") or disabled ("Unimodem
+     mode"). Without Call-IDs (in Unimodem mode), only a very limited set of
+     functions is available. It allows outgoing data connections only, but
+     does not signal incoming calls or other base events.
+
+     DECT cordless data devices (M10x) permanently occupy the cordless
+     connection to the base while Call-IDs are activated. As the Gigaset
+     bases only support one DECT data connection at a time, this prevents
+     other DECT cordless data devices from accessing the base.
+
+     During active operation, the driver switches to the necessary mode
+     automatically. However, for the reasons above, the mode chosen when
+     the device is not in use (idle) can be selected by the user.
+     - If you want to receive incoming calls, you can use the default
+       settings (CID mode).
+     - If you have several DECT data devices (M10x) which you want to use
+       in turn, select Unimodem mode by passing the parameter "cidmode=0" to
+       the appropriate driver module (ser_gigaset or usb_gigaset).
+
+     If you want both of these at once, you are out of luck.
+
+     You can also use the tty class parameter "cidmode" of the device to
+     change its CID mode while the driver is loaded, eg.
+        echo 0 > /sys/class/tty/ttyGU0/cidmode
+
+2.7. Dialing Numbers
+     ---------------
+     The called party number provided by an application for dialing out must
+     be a public network number according to the local dialing plan, without
+     any dial prefix for getting an outside line.
+
+     Internal calls can be made by providing an internal extension number
+     prefixed with "**" (two asterisks) as the called party number. So to dial
+     eg. the first registered DECT handset, give "**11" as the called party
+     number. Dialing "***" (three asterisks) calls all extensions
+     simultaneously (global call).
+
+     This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
+     does not support internal calls.
+
+2.8. Unregistered Wireless Devices (M101/M105)
+     -----------------------------------------
+     The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
+     the M101 and M105 wireless devices to be used as ISDN devices for ISDN
+     connections through a Gigaset base. Therefore they assume that the device
+     is registered to a DECT base.
+
+     If the M101/M105 device is not registered to a base, initialization of
+     the device fails, and a corresponding error message is logged by the
+     driver. In that situation, a restricted set of functions is available
+     which includes, in particular, those necessary for registering the device
+     to a base or for switching it between Fixed Part and Portable Part
+     modes. See the gigacontr(8) manpage for details.
+
+3.   Troubleshooting
+     ---------------
+3.1. Solutions to frequently reported problems
+     -----------------------------------------
+     Problem:
+        You have a slow provider and isdn4linux gives up dialing too early.
+     Solution:
+        Load the isdn module using the dialtimeout option. You can do this e.g.
+        by adding a line like
+
+           options isdn dialtimeout=15
+
+        to /etc/modprobe.d/gigaset.conf or a similar file.
+
+     Problem:
+        The isdnlog program emits error messages or just doesn't work.
+     Solution:
+        Isdnlog supports only the HiSax driver. Do not attempt to use it with
+	other drivers such as Gigaset.
+
+     Problem:
+        You have two or more DECT data adapters (M101/M105) and only the
+        first one you turn on works.
+     Solution:
+        Select Unimodem mode for all DECT data adapters. (see section 2.5.)
+
+     Problem:
+	Messages like this:
+	    usb_gigaset 3-2:1.0: Could not initialize the device.
+	appear in your syslog.
+     Solution:
+	Check whether your M10x wireless device is correctly registered to the
+	Gigaset base. (see section 2.7.)
+
+3.2. Telling the driver to provide more information
+     ----------------------------------------------
+     Building the driver with the "Gigaset debugging" kernel configuration
+     option (CONFIG_GIGASET_DEBUG) gives it the ability to produce additional
+     information useful for debugging.
+
+     You can control the amount of debugging information the driver produces by
+     writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g.
+        echo 0 > /sys/module/gigaset/parameters/debug
+     switches off debugging output completely,
+        echo 0x302020 > /sys/module/gigaset/parameters/debug
+     enables a reasonable set of debugging output messages. These values are
+     bit patterns where every bit controls a certain type of debugging output.
+     See the constants DEBUG_* in the source file gigaset.h for details.
+
+     The initial value can be set using the debug parameter when loading the
+     module "gigaset", e.g. by adding a line
+        options gigaset debug=0
+     to your module configuration file, eg. /etc/modprobe.d/gigaset.conf
+
+     Generated debugging information can be found
+     - as output of the command
+         dmesg
+     - in system log files written by your syslog daemon, usually
+       in /var/log/, e.g. /var/log/messages.
+
+3.3. Reporting problems and bugs
+     ---------------------------
+     If you can't solve problems with the driver on your own, feel free to
+     use one of the forums, bug trackers, or mailing lists on
+         http://sourceforge.net/projects/gigaset307x
+     or write an electronic mail to the maintainers.
+
+     Try to provide as much information as possible, such as
+     - distribution
+     - kernel version (uname -r)
+     - gcc version (gcc --version)
+     - hardware architecture (uname -m, ...)
+     - type and firmware version of your device (base and wireless module,
+       if any)
+     - output of "lsusb -v" (if using an USB device)
+     - error messages
+     - relevant system log messages (it would help if you activate debug
+       output as described in 3.2.)
+
+     For help with general configuration problems not specific to our driver,
+     such as isdn4linux and network configuration issues, please refer to the
+     appropriate forums and newsgroups.
+
+3.4. Reporting problem solutions
+     ---------------------------
+     If you solved a problem with our drivers, wrote startup scripts for your
+     distribution, ... feel free to contact us (using one of the places
+     mentioned in 3.3.). We'd like to add scripts, hints, documentation
+     to the driver and/or the project web page.
+
+
+4.   Links, other software
+     ---------------------
+     - Sourceforge project developing this driver and associated tools
+         http://sourceforge.net/projects/gigaset307x
+     - Yahoo! Group on the Siemens Gigaset family of devices
+         http://de.groups.yahoo.com/group/Siemens-Gigaset
+     - Siemens Gigaset/T-Sinus compatibility table
+         http://www.erbze.info/sinus_gigaset.htm
+
+
+5.   Credits
+     -------
+     Thanks to
+
+     Karsten Keil
+        for his help with isdn4linux
+     Deti Fliegl
+        for his base driver code
+     Dennis Dietrich
+        for his kernel 2.6 patches
+     Andreas Rummel
+        for his work and logs to get unimodem mode working
+     Andreas Degert
+        for his logs and patches to get cx 100 working
+     Dietrich Feist
+        for his generous donation of one M105 and two M101 cordless adapters
+     Christoph Schweers
+        for his generous donation of a M34 device
+
+     and all the other people who sent logs and other information.
+