Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 393 deletions

diff --git a/ANDROID_3.4.5/include/sound/opl3.h b/ANDROID_3.4.5/include/sound/opl3.h
deleted file mode 100644
index 6ba67070..00000000
--- a/ANDROID_3.4.5/include/sound/opl3.h
+++ /dev/null
@@ -1,393 +0,0 @@
-#ifndef __SOUND_OPL3_H
-#define __SOUND_OPL3_H
-
-/*
- * Definitions of the OPL-3 registers.
- *
- * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
- *                  Hannu Savolainen 1993-1996
- *
- *
- *      The OPL-3 mode is switched on by writing 0x01, to the offset 5
- *      of the right side.
- *
- *      Another special register at the right side is at offset 4. It contains
- *      a bit mask defining which voices are used as 4 OP voices.
- *
- *      The percussive mode is implemented in the left side only.
- *
- *      With the above exceptions the both sides can be operated independently.
- *      
- *      A 4 OP voice can be created by setting the corresponding
- *      bit at offset 4 of the right side.
- *
- *      For example setting the rightmost bit (0x01) changes the
- *      first voice on the right side to the 4 OP mode. The fourth
- *      voice is made inaccessible.
- *
- *      If a voice is set to the 2 OP mode, it works like 2 OP modes
- *      of the original YM3812 (AdLib). In addition the voice can 
- *      be connected the left, right or both stereo channels. It can
- *      even be left unconnected. This works with 4 OP voices also.
- *
- *      The stereo connection bits are located in the FEEDBACK_CONNECTION
- *      register of the voice (0xC0-0xC8). In 4 OP voices these bits are
- *      in the second half of the voice.
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#include <sound/core.h>
-#include <sound/hwdep.h>
-#include <sound/timer.h>
-#include <sound/seq_midi_emul.h>
-#ifdef CONFIG_SND_SEQUENCER_OSS
-#include <sound/seq_oss.h>
-#include <sound/seq_oss_legacy.h>
-#endif
-#include <sound/seq_device.h>
-#include <sound/asound_fm.h>
-
-/*
- *    Register numbers for the global registers
- */
-
-#define OPL3_REG_TEST			0x01
-#define   OPL3_ENABLE_WAVE_SELECT	0x20
-
-#define OPL3_REG_TIMER1			0x02
-#define OPL3_REG_TIMER2			0x03
-#define OPL3_REG_TIMER_CONTROL		0x04	/* Left side */
-#define   OPL3_IRQ_RESET		0x80
-#define   OPL3_TIMER1_MASK		0x40
-#define   OPL3_TIMER2_MASK		0x20
-#define   OPL3_TIMER1_START		0x01
-#define   OPL3_TIMER2_START		0x02
-
-#define OPL3_REG_CONNECTION_SELECT	0x04	/* Right side */
-#define   OPL3_LEFT_4OP_0		0x01
-#define   OPL3_LEFT_4OP_1		0x02
-#define   OPL3_LEFT_4OP_2		0x04
-#define   OPL3_RIGHT_4OP_0		0x08
-#define   OPL3_RIGHT_4OP_1		0x10
-#define   OPL3_RIGHT_4OP_2		0x20
-
-#define OPL3_REG_MODE			0x05	/* Right side */
-#define   OPL3_OPL3_ENABLE		0x01	/* OPL3 mode */
-#define   OPL3_OPL4_ENABLE		0x02	/* OPL4 mode */
-
-#define OPL3_REG_KBD_SPLIT		0x08	/* Left side */
-#define   OPL3_COMPOSITE_SINE_WAVE_MODE	0x80	/* Don't use with OPL-3? */
-#define   OPL3_KEYBOARD_SPLIT		0x40
-
-#define OPL3_REG_PERCUSSION		0xbd	/* Left side only */
-#define   OPL3_TREMOLO_DEPTH		0x80
-#define   OPL3_VIBRATO_DEPTH		0x40
-#define	  OPL3_PERCUSSION_ENABLE	0x20
-#define   OPL3_BASSDRUM_ON		0x10
-#define   OPL3_SNAREDRUM_ON		0x08
-#define   OPL3_TOMTOM_ON		0x04
-#define   OPL3_CYMBAL_ON		0x02
-#define   OPL3_HIHAT_ON			0x01
-
-/*
- *    Offsets to the register banks for operators. To get the
- *      register number just add the operator offset to the bank offset
- *
- *      AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
- */
-#define OPL3_REG_AM_VIB			0x20
-#define   OPL3_TREMOLO_ON		0x80
-#define   OPL3_VIBRATO_ON		0x40
-#define   OPL3_SUSTAIN_ON		0x20
-#define   OPL3_KSR			0x10	/* Key scaling rate */
-#define   OPL3_MULTIPLE_MASK		0x0f	/* Frequency multiplier */
-
- /*
-  *   KSL/Total level (0x40 to 0x55)
-  */
-#define OPL3_REG_KSL_LEVEL		0x40
-#define   OPL3_KSL_MASK			0xc0	/* Envelope scaling bits */
-#define   OPL3_TOTAL_LEVEL_MASK		0x3f	/* Strength (volume) of OP */
-
-/*
- *    Attack / Decay rate (0x60 to 0x75)
- */
-#define OPL3_REG_ATTACK_DECAY		0x60
-#define   OPL3_ATTACK_MASK		0xf0
-#define   OPL3_DECAY_MASK		0x0f
-
-/*
- * Sustain level / Release rate (0x80 to 0x95)
- */
-#define OPL3_REG_SUSTAIN_RELEASE	0x80
-#define   OPL3_SUSTAIN_MASK		0xf0
-#define   OPL3_RELEASE_MASK		0x0f
-
-/*
- * Wave select (0xE0 to 0xF5)
- */
-#define OPL3_REG_WAVE_SELECT		0xe0
-#define   OPL3_WAVE_SELECT_MASK		0x07
-
-/*
- *    Offsets to the register banks for voices. Just add to the
- *      voice number to get the register number.
- *
- *      F-Number low bits (0xA0 to 0xA8).
- */
-#define OPL3_REG_FNUM_LOW		0xa0
-
-/*
- *    F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
- */
-#define OPL3_REG_KEYON_BLOCK		0xb0
-#define	  OPL3_KEYON_BIT		0x20
-#define	  OPL3_BLOCKNUM_MASK		0x1c
-#define   OPL3_FNUM_HIGH_MASK		0x03
-
-/*
- *    Feedback / Connection (0xc0 to 0xc8)
- *
- *      These registers have two new bits when the OPL-3 mode
- *      is selected. These bits controls connecting the voice
- *      to the stereo channels. For 4 OP voices this bit is
- *      defined in the second half of the voice (add 3 to the
- *      register offset).
- *
- *      For 4 OP voices the connection bit is used in the
- *      both halves (gives 4 ways to connect the operators).
- */
-#define OPL3_REG_FEEDBACK_CONNECTION	0xc0
-#define   OPL3_FEEDBACK_MASK		0x0e	/* Valid just for 1st OP of a voice */
-#define   OPL3_CONNECTION_BIT		0x01
-/*
- *    In the 4 OP mode there is four possible configurations how the
- *      operators can be connected together (in 2 OP modes there is just
- *      AM or FM). The 4 OP connection mode is defined by the rightmost
- *      bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
- *
- *      First half      Second half     Mode
- *
- *                                       +---+
- *                                       v   |
- *      0               0               >+-1-+--2--3--4-->
- *
- *
- *                                      
- *                                       +---+
- *                                       |   |
- *      0               1               >+-1-+--2-+
- *                                                |->
- *                                      >--3----4-+
- *                                      
- *                                       +---+
- *                                       |   |
- *      1               0               >+-1-+-----+
- *                                                 |->
- *                                      >--2--3--4-+
- *
- *                                       +---+
- *                                       |   |
- *      1               1               >+-1-+--+
- *                                              |
- *                                      >--2--3-+->
- *                                              |
- *                                      >--4----+
- */
-#define   OPL3_STEREO_BITS		0x30	/* OPL-3 only */
-#define     OPL3_VOICE_TO_LEFT		0x10
-#define     OPL3_VOICE_TO_RIGHT		0x20
-
-/*
-
- */
-
-#define OPL3_LEFT		0x0000
-#define OPL3_RIGHT		0x0100
-
-#define OPL3_HW_AUTO		0x0000
-#define OPL3_HW_OPL2		0x0200
-#define OPL3_HW_OPL3		0x0300
-#define OPL3_HW_OPL3_SV		0x0301	/* S3 SonicVibes */
-#define OPL3_HW_OPL3_CS		0x0302	/* CS4232/CS4236+ */
-#define OPL3_HW_OPL3_FM801	0x0303	/* FM801 */
-#define OPL3_HW_OPL3_CS4281	0x0304	/* CS4281 */
-#define OPL3_HW_OPL4		0x0400	/* YMF278B/YMF295 */
-#define OPL3_HW_OPL4_ML		0x0401	/* YMF704/YMF721 */
-#define OPL3_HW_MASK		0xff00
-
-#define MAX_OPL2_VOICES		9
-#define MAX_OPL3_VOICES		18
-
-struct snd_opl3;
-
-/*
- * Instrument record, aka "Patch"
- */
-
-/* FM operator */
-struct fm_operator {
-	unsigned char am_vib;
-	unsigned char ksl_level;
-	unsigned char attack_decay;
-	unsigned char sustain_release;
-	unsigned char wave_select;
-} __attribute__((packed));
-
-/* Instrument data */
-struct fm_instrument {
-	struct fm_operator op[4];
-	unsigned char feedback_connection[2];
-	unsigned char echo_delay;
-	unsigned char echo_atten;
-	unsigned char chorus_spread;
-	unsigned char trnsps;
-	unsigned char fix_dur;
-	unsigned char modes;
-	unsigned char fix_key;
-};
-
-/* type */
-#define FM_PATCH_OPL2	0x01		/* OPL2 2 operators FM instrument */
-#define FM_PATCH_OPL3	0x02		/* OPL3 4 operators FM instrument */
-
-/* Instrument record */
-struct fm_patch {
-	unsigned char prog;
-	unsigned char bank;
-	unsigned char type;
-	struct fm_instrument inst;
-	char name[24];
-	struct fm_patch *next;
-};
-
-
-/*
- * A structure to keep track of each hardware voice
- */
-struct snd_opl3_voice {
-	int  state;		/* status */
-#define SNDRV_OPL3_ST_OFF		0	/* Not playing */
-#define SNDRV_OPL3_ST_ON_2OP	1	/* 2op voice is allocated */
-#define SNDRV_OPL3_ST_ON_4OP	2	/* 4op voice is allocated */
-#define SNDRV_OPL3_ST_NOT_AVAIL	-1	/* voice is not available */
-
-	unsigned int time;	/* An allocation time */
-	unsigned char note;	/* Note currently assigned to this voice */
-
-	unsigned long note_off;	/* note-off time */
-	int note_off_check;	/* check note-off time */
-
-	unsigned char keyon_reg;	/* KON register shadow */
-
-	struct snd_midi_channel *chan;	/* Midi channel for this note */
-};
-
-struct snd_opl3 {
-	unsigned long l_port;
-	unsigned long r_port;
-	struct resource *res_l_port;
-	struct resource *res_r_port;
-	unsigned short hardware;
-	/* hardware access */
-	void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val);
-	unsigned short timer_enable;
-	int seq_dev_num;	/* sequencer device number */
-	struct snd_timer *timer1;
-	struct snd_timer *timer2;
-	spinlock_t timer_lock;
-
-	void *private_data;
-	void (*private_free)(struct snd_opl3 *);
-
-	struct snd_hwdep *hwdep;
-	spinlock_t reg_lock;
-	struct snd_card *card;		/* The card that this belongs to */
-	unsigned char fm_mode;		/* OPL mode, see SNDRV_DM_FM_MODE_XXX */
-	unsigned char rhythm;		/* percussion mode flag */
-	unsigned char max_voices;	/* max number of voices */
-#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
-#define SNDRV_OPL3_MODE_SYNTH 0		/* OSS - voices allocated by application */
-#define SNDRV_OPL3_MODE_SEQ 1		/* ALSA - driver handles voice allocation */
-	int synth_mode;			/* synth mode */
-	int seq_client;
-
-	struct snd_seq_device *seq_dev;	/* sequencer device */
-	struct snd_midi_channel_set * chset;
-
-#ifdef CONFIG_SND_SEQUENCER_OSS
-	struct snd_seq_device *oss_seq_dev;	/* OSS sequencer device */
-	struct snd_midi_channel_set * oss_chset;
-#endif
- 
-#define OPL3_PATCH_HASH_SIZE	32
-	struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE];
-
-	struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */
-	int use_time;			/* allocation counter */
-
-	unsigned short connection_reg;	/* connection reg shadow */
-	unsigned char drum_reg;		/* percussion reg shadow */
-
-	spinlock_t voice_lock;		/* Lock for voice access */
-
-	struct timer_list tlist;	/* timer for note-offs and effects */
-	int sys_timer_status;		/* system timer run status */
-	spinlock_t sys_timer_lock;	/* Lock for system timer access */
-#endif
-};
-
-/* opl3.c */
-void snd_opl3_interrupt(struct snd_hwdep * hw);
-int snd_opl3_new(struct snd_card *card, unsigned short hardware,
-		 struct snd_opl3 **ropl3);
-int snd_opl3_init(struct snd_opl3 *opl3);
-int snd_opl3_create(struct snd_card *card,
-		    unsigned long l_port, unsigned long r_port,
-		    unsigned short hardware,
-		    int integrated,
-		    struct snd_opl3 ** opl3);
-int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev);
-int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device,
-		       struct snd_hwdep ** rhwdep);
-
-/* opl3_synth */
-int snd_opl3_open(struct snd_hwdep * hw, struct file *file);
-int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file,
-		   unsigned int cmd, unsigned long arg);
-int snd_opl3_release(struct snd_hwdep * hw, struct file *file);
-
-void snd_opl3_reset(struct snd_opl3 * opl3);
-
-#if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
-long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count,
-		    loff_t *offset);
-int snd_opl3_load_patch(struct snd_opl3 *opl3,
-			int prog, int bank, int type,
-			const char *name,
-			const unsigned char *ext,
-			const unsigned char *data);
-struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank,
-				     int create_patch);
-void snd_opl3_clear_patches(struct snd_opl3 *opl3);
-#else
-#define snd_opl3_write	NULL
-static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {}
-#endif
-
-#endif /* __SOUND_OPL3_H */