Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 229 deletions

diff --git a/ANDROID_3.4.5/include/linux/regulator/driver.h b/ANDROID_3.4.5/include/linux/regulator/driver.h
deleted file mode 100644
index fa8b55b8..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/driver.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * driver.h -- SoC Regulator driver support.
- *
- * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
- *
- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Regulator Driver Interface.
- */
-
-#ifndef __LINUX_REGULATOR_DRIVER_H_
-#define __LINUX_REGULATOR_DRIVER_H_
-
-#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/regulator/consumer.h>
-
-struct regulator_dev;
-struct regulator_init_data;
-
-enum regulator_status {
-	REGULATOR_STATUS_OFF,
-	REGULATOR_STATUS_ON,
-	REGULATOR_STATUS_ERROR,
-	/* fast/normal/idle/standby are flavors of "on" */
-	REGULATOR_STATUS_FAST,
-	REGULATOR_STATUS_NORMAL,
-	REGULATOR_STATUS_IDLE,
-	REGULATOR_STATUS_STANDBY,
-};
-
-/**
- * struct regulator_ops - regulator operations.
- *
- * @enable: Configure the regulator as enabled.
- * @disable: Configure the regulator as disabled.
- * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
- *		May also return negative errno.
- *
- * @set_voltage: Set the voltage for the regulator within the range specified.
- *               The driver should select the voltage closest to min_uV.
- * @set_voltage_sel: Set the voltage for the regulator using the specified
- *                   selector.
- * @get_voltage: Return the currently configured voltage for the regulator.
- * @get_voltage_sel: Return the currently configured voltage selector for the
- *                   regulator.
- * @list_voltage: Return one of the supported voltages, in microvolts; zero
- *	if the selector indicates a voltage that is unusable on this system;
- *	or negative errno.  Selectors range from zero to one less than
- *	regulator_desc.n_voltages.  Voltages may be reported in any order.
- *
- * @set_current_limit: Configure a limit for a current-limited regulator.
- * @get_current_limit: Get the configured limit for a current-limited regulator.
- *
- * @set_mode: Set the configured operating mode for the regulator.
- * @get_mode: Get the configured operating mode for the regulator.
- * @get_status: Return actual (not as-configured) status of regulator, as a
- *	REGULATOR_STATUS value (or negative errno)
- * @get_optimum_mode: Get the most efficient operating mode for the regulator
- *                    when running with the specified parameters.
- *
- * @enable_time: Time taken for the regulator voltage output voltage to
- *               stabilise after being enabled, in microseconds.
- * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
- *               to stabilise after being set to a new value, in microseconds.
- *               The function provides the from and to voltage selector, the
- *               function should return the worst case.
- *
- * @set_suspend_voltage: Set the voltage for the regulator when the system
- *                       is suspended.
- * @set_suspend_enable: Mark the regulator as enabled when the system is
- *                      suspended.
- * @set_suspend_disable: Mark the regulator as disabled when the system is
- *                       suspended.
- * @set_suspend_mode: Set the operating mode for the regulator when the
- *                    system is suspended.
- *
- * This struct describes regulator operations which can be implemented by
- * regulator chip drivers.
- */
-struct regulator_ops {
-
-	/* enumerate supported voltages */
-	int (*list_voltage) (struct regulator_dev *, unsigned selector);
-
-	/* get/set regulator voltage */
-	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
-			    unsigned *selector);
-	int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
-	int (*get_voltage) (struct regulator_dev *);
-	int (*get_voltage_sel) (struct regulator_dev *);
-
-	/* get/set regulator current  */
-	int (*set_current_limit) (struct regulator_dev *,
-				 int min_uA, int max_uA);
-	int (*get_current_limit) (struct regulator_dev *);
-
-	/* enable/disable regulator */
-	int (*enable) (struct regulator_dev *);
-	int (*disable) (struct regulator_dev *);
-	int (*is_enabled) (struct regulator_dev *);
-
-	/* get/set regulator operating mode (defined in consumer.h) */
-	int (*set_mode) (struct regulator_dev *, unsigned int mode);
-	unsigned int (*get_mode) (struct regulator_dev *);
-
-	/* Time taken to enable or set voltage on the regulator */
-	int (*enable_time) (struct regulator_dev *);
-	int (*set_voltage_time_sel) (struct regulator_dev *,
-				     unsigned int old_selector,
-				     unsigned int new_selector);
-
-	/* report regulator status ... most other accessors report
-	 * control inputs, this reports results of combining inputs
-	 * from Linux (and other sources) with the actual load.
-	 * returns REGULATOR_STATUS_* or negative errno.
-	 */
-	int (*get_status)(struct regulator_dev *);
-
-	/* get most efficient regulator operating mode for load */
-	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
-					  int output_uV, int load_uA);
-
-	/* the operations below are for configuration of regulator state when
-	 * its parent PMIC enters a global STANDBY/HIBERNATE state */
-
-	/* set regulator suspend voltage */
-	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
-
-	/* enable/disable regulator in suspend state */
-	int (*set_suspend_enable) (struct regulator_dev *);
-	int (*set_suspend_disable) (struct regulator_dev *);
-
-	/* set regulator suspend operating mode (defined in consumer.h) */
-	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
-};
-
-/*
- * Regulators can either control voltage or current.
- */
-enum regulator_type {
-	REGULATOR_VOLTAGE,
-	REGULATOR_CURRENT,
-};
-
-/**
- * struct regulator_desc - Regulator descriptor
- *
- * Each regulator registered with the core is described with a structure of
- * this type.
- *
- * @name: Identifying name for the regulator.
- * @supply_name: Identifying the regulator supply
- * @id: Numerical identifier for the regulator.
- * @n_voltages: Number of selectors available for ops.list_voltage().
- * @ops: Regulator operations table.
- * @irq: Interrupt number for the regulator.
- * @type: Indicates if the regulator is a voltage or current regulator.
- * @owner: Module providing the regulator, used for refcounting.
- */
-struct regulator_desc {
-	const char *name;
-	const char *supply_name;
-	int id;
-	unsigned n_voltages;
-	struct regulator_ops *ops;
-	int irq;
-	enum regulator_type type;
-	struct module *owner;
-};
-
-/*
- * struct regulator_dev
- *
- * Voltage / Current regulator class device. One for each
- * regulator.
- *
- * This should *not* be used directly by anything except the regulator
- * core and notification injection (which should take the mutex and do
- * no other direct access).
- */
-struct regulator_dev {
-	struct regulator_desc *desc;
-	int exclusive;
-	u32 use_count;
-	u32 open_count;
-
-	/* lists we belong to */
-	struct list_head list; /* list of all regulators */
-
-	/* lists we own */
-	struct list_head consumer_list; /* consumers we supply */
-
-	struct blocking_notifier_head notifier;
-	struct mutex mutex; /* consumer lock */
-	struct module *owner;
-	struct device dev;
-	struct regulation_constraints *constraints;
-	struct regulator *supply;	/* for tree */
-
-	struct delayed_work disable_work;
-	int deferred_disables;
-
-	void *reg_data;		/* regulator_dev data */
-
-	struct dentry *debugfs;
-};
-
-struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, const struct regulator_init_data *init_data,
-	void *driver_data, struct device_node *of_node);
-void regulator_unregister(struct regulator_dev *rdev);
-
-int regulator_notifier_call_chain(struct regulator_dev *rdev,
-				  unsigned long event, void *data);
-
-void *rdev_get_drvdata(struct regulator_dev *rdev);
-struct device *rdev_get_dev(struct regulator_dev *rdev);
-int rdev_get_id(struct regulator_dev *rdev);
-
-int regulator_mode_to_status(unsigned int);
-
-void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
-
-#endif