init android origin source code

1 files changed, 319 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/include/linux/printk.h b/ANDROID_3.4.5/include/linux/printk.h
new file mode 100644
index 00000000..0525927f
--- /dev/null
+++ b/ANDROID_3.4.5/include/linux/printk.h
@@ -0,0 +1,319 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+#include <linux/init.h>
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define KERN_EMERG	"<0>"	/* system is unusable			*/
+#define KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define KERN_CRIT	"<2>"	/* critical conditions			*/
+#define KERN_ERR	"<3>"	/* error conditions			*/
+#define KERN_WARNING	"<4>"	/* warning conditions			*/
+#define KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define KERN_INFO	"<6>"	/* informational			*/
+#define KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define KERN_CONT	"<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __printf(1, 2)
+int no_printk(const char *fmt, ...)
+{
+	return 0;
+}
+
+extern asmlinkage __printf(1, 2)
+void early_printk(const char *fmt, ...);
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+#ifdef CONFIG_PRINTK
+asmlinkage __printf(1, 0)
+int vprintk(const char *fmt, va_list args);
+asmlinkage __printf(1, 2) __cold
+int printk(const char *fmt, ...);
+
+/*
+ * Special printk facility for scheduler use only, _DO_NOT_USE_ !
+ */
+__printf(1, 2) __cold int printk_sched(const char *fmt, ...);
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites.  Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				   unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+extern int kptr_restrict;
+
+void log_buf_kexec_setup(void);
+void __init setup_log_buf(int early);
+#else
+static inline __printf(1, 0)
+int vprintk(const char *s, va_list args)
+{
+	return 0;
+}
+static inline __printf(1, 2) __cold
+int printk(const char *s, ...)
+{
+	return 0;
+}
+static inline __printf(1, 2) __cold
+int printk_sched(const char *s, ...)
+{
+	return 0;
+}
+static inline int printk_ratelimit(void)
+{
+	return 0;
+}
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+					  unsigned int interval_msec)
+{
+	return false;
+}
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+
+static inline void setup_log_buf(int early)
+{
+}
+#endif
+
+extern void dump_stack(void) __cold;
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+	printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+	printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+	printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+	printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+	printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+	printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+	printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+	printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+	dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#elif defined(DEBUG)
+#define pr_debug(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+
+#ifdef CONFIG_PRINTK
+#define printk_once(fmt, ...)			\
+({						\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(fmt, ##__VA_ARGS__);	\
+	}					\
+})
+#else
+#define printk_once(fmt, ...)			\
+	no_printk(fmt, ##__VA_ARGS__)
+#endif
+
+#define pr_emerg_once(fmt, ...)					\
+	printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_once(fmt, ...)					\
+	printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_once(fmt, ...)					\
+	printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_once(fmt, ...)					\
+	printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_once(fmt, ...)					\
+	printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_once(fmt, ...)				\
+	printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_once(fmt, ...)					\
+	printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont_once(fmt, ...)					\
+	printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_once(fmt, ...)					\
+	printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_once(fmt, ...)					\
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...)					\
+({									\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+									\
+	if (__ratelimit(&_rs))						\
+		printk(fmt, ##__VA_ARGS__);				\
+})
+#else
+#define printk_ratelimited(fmt, ...)					\
+	no_printk(fmt, ##__VA_ARGS__)
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...)					\
+	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#endif
+
+enum {
+	DUMP_PREFIX_NONE,
+	DUMP_PREFIX_ADDRESS,
+	DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+			       int rowsize, int groupsize,
+			       char *linebuf, size_t linebuflen, bool ascii);
+#ifdef CONFIG_PRINTK
+extern void print_hex_dump(const char *level, const char *prefix_str,
+			   int prefix_type, int rowsize, int groupsize,
+			   const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+				 const void *buf, size_t len);
+#else
+static inline void print_hex_dump(const char *level, const char *prefix_str,
+				  int prefix_type, int rowsize, int groupsize,
+				  const void *buf, size_t len, bool ascii)
+{
+}
+static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+					const void *buf, size_t len)
+{
+}
+
+#endif
+
+#endif