Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 315 deletions

diff --git a/ANDROID_3.4.5/include/linux/jiffies.h b/ANDROID_3.4.5/include/linux/jiffies.h
deleted file mode 100644
index 265e2c3c..00000000
--- a/ANDROID_3.4.5/include/linux/jiffies.h
+++ /dev/null
@@ -1,315 +0,0 @@
-#ifndef _LINUX_JIFFIES_H
-#define _LINUX_JIFFIES_H
-
-#include <linux/math64.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <asm/param.h>			/* for HZ */
-
-/*
- * The following defines establish the engineering parameters of the PLL
- * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
- * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
- * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
- * nearest power of two in order to avoid hardware multiply operations.
- */
-#if HZ >= 12 && HZ < 24
-# define SHIFT_HZ	4
-#elif HZ >= 24 && HZ < 48
-# define SHIFT_HZ	5
-#elif HZ >= 48 && HZ < 96
-# define SHIFT_HZ	6
-#elif HZ >= 96 && HZ < 192
-# define SHIFT_HZ	7
-#elif HZ >= 192 && HZ < 384
-# define SHIFT_HZ	8
-#elif HZ >= 384 && HZ < 768
-# define SHIFT_HZ	9
-#elif HZ >= 768 && HZ < 1536
-# define SHIFT_HZ	10
-#elif HZ >= 1536 && HZ < 3072
-# define SHIFT_HZ	11
-#elif HZ >= 3072 && HZ < 6144
-# define SHIFT_HZ	12
-#elif HZ >= 6144 && HZ < 12288
-# define SHIFT_HZ	13
-#else
-# error Invalid value of HZ.
-#endif
-
-/* LATCH is used in the interval timer and ftape setup. */
-#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
-
-/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
- * improve accuracy by shifting LSH bits, hence calculating:
- *     (NOM << LSH) / DEN
- * This however means trouble for large NOM, because (NOM << LSH) may no
- * longer fit in 32 bits. The following way of calculating this gives us
- * some slack, under the following conditions:
- *   - (NOM / DEN) fits in (32 - LSH) bits.
- *   - (NOM % DEN) fits in (32 - LSH) bits.
- */
-#define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
-                             + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
-
-/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
-#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
-
-/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
-#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
-
-/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
-#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-
-/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
-/* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
-
-/* some arch's have a small-data section that can be accessed register-relative
- * but that can only take up to, say, 4-byte variables. jiffies being part of
- * an 8-byte variable may not be correctly accessed unless we force the issue
- */
-#define __jiffy_data  __attribute__((section(".data")))
-
-/*
- * The 64-bit value is not atomic - you MUST NOT read it
- * without sampling the sequence number in xtime_lock.
- * get_jiffies_64() will do this for you as appropriate.
- */
-extern u64 __jiffy_data jiffies_64;
-extern unsigned long volatile __jiffy_data jiffies;
-
-#if (BITS_PER_LONG < 64)
-u64 get_jiffies_64(void);
-#else
-static inline u64 get_jiffies_64(void)
-{
-	return (u64)jiffies;
-}
-#endif
-
-/*
- *	These inlines deal with timer wrapping correctly. You are 
- *	strongly encouraged to use them
- *	1. Because people otherwise forget
- *	2. Because if the timer wrap changes in future you won't have to
- *	   alter your driver code.
- *
- * time_after(a,b) returns true if the time a is after time b.
- *
- * Do this with "<0" and ">=0" to only test the sign of the result. A
- * good compiler would generate better code (and a really good compiler
- * wouldn't care). Gcc is currently neither.
- */
-#define time_after(a,b)		\
-	(typecheck(unsigned long, a) && \
-	 typecheck(unsigned long, b) && \
-	 ((long)(b) - (long)(a) < 0))
-#define time_before(a,b)	time_after(b,a)
-
-#define time_after_eq(a,b)	\
-	(typecheck(unsigned long, a) && \
-	 typecheck(unsigned long, b) && \
-	 ((long)(a) - (long)(b) >= 0))
-#define time_before_eq(a,b)	time_after_eq(b,a)
-
-/*
- * Calculate whether a is in the range of [b, c].
- */
-#define time_in_range(a,b,c) \
-	(time_after_eq(a,b) && \
-	 time_before_eq(a,c))
-
-/*
- * Calculate whether a is in the range of [b, c).
- */
-#define time_in_range_open(a,b,c) \
-	(time_after_eq(a,b) && \
-	 time_before(a,c))
-
-/* Same as above, but does so with platform independent 64bit types.
- * These must be used when utilizing jiffies_64 (i.e. return value of
- * get_jiffies_64() */
-#define time_after64(a,b)	\
-	(typecheck(__u64, a) &&	\
-	 typecheck(__u64, b) && \
-	 ((__s64)(b) - (__s64)(a) < 0))
-#define time_before64(a,b)	time_after64(b,a)
-
-#define time_after_eq64(a,b)	\
-	(typecheck(__u64, a) && \
-	 typecheck(__u64, b) && \
-	 ((__s64)(a) - (__s64)(b) >= 0))
-#define time_before_eq64(a,b)	time_after_eq64(b,a)
-
-/*
- * These four macros compare jiffies and 'a' for convenience.
- */
-
-/* time_is_before_jiffies(a) return true if a is before jiffies */
-#define time_is_before_jiffies(a) time_after(jiffies, a)
-
-/* time_is_after_jiffies(a) return true if a is after jiffies */
-#define time_is_after_jiffies(a) time_before(jiffies, a)
-
-/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
-#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
-
-/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
-#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
-
-/*
- * Have the 32 bit jiffies value wrap 5 minutes after boot
- * so jiffies wrap bugs show up earlier.
- */
-#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
-
-/*
- * Change timeval to jiffies, trying to avoid the
- * most obvious overflows..
- *
- * And some not so obvious.
- *
- * Note that we don't want to return LONG_MAX, because
- * for various timeout reasons we often end up having
- * to wait "jiffies+1" in order to guarantee that we wait
- * at _least_ "jiffies" - so "jiffies+1" had better still
- * be positive.
- */
-#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
-
-extern unsigned long preset_lpj;
-
-/*
- * We want to do realistic conversions of time so we need to use the same
- * values the update wall clock code uses as the jiffies size.  This value
- * is: TICK_NSEC (which is defined in timex.h).  This
- * is a constant and is in nanoseconds.  We will use scaled math
- * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
- * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
- * constants and so are computed at compile time.  SHIFT_HZ (computed in
- * timex.h) adjusts the scaling for different HZ values.
-
- * Scaled math???  What is that?
- *
- * Scaled math is a way to do integer math on values that would,
- * otherwise, either overflow, underflow, or cause undesired div
- * instructions to appear in the execution path.  In short, we "scale"
- * up the operands so they take more bits (more precision, less
- * underflow), do the desired operation and then "scale" the result back
- * by the same amount.  If we do the scaling by shifting we avoid the
- * costly mpy and the dastardly div instructions.
-
- * Suppose, for example, we want to convert from seconds to jiffies
- * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
- * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
- * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
- * might calculate at compile time, however, the result will only have
- * about 3-4 bits of precision (less for smaller values of HZ).
- *
- * So, we scale as follows:
- * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
- * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
- * Then we make SCALE a power of two so:
- * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
- * Now we define:
- * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
- * jiff = (sec * SEC_CONV) >> SCALE;
- *
- * Often the math we use will expand beyond 32-bits so we tell C how to
- * do this and pass the 64-bit result of the mpy through the ">> SCALE"
- * which should take the result back to 32-bits.  We want this expansion
- * to capture as much precision as possible.  At the same time we don't
- * want to overflow so we pick the SCALE to avoid this.  In this file,
- * that means using a different scale for each range of HZ values (as
- * defined in timex.h).
- *
- * For those who want to know, gcc will give a 64-bit result from a "*"
- * operator if the result is a long long AND at least one of the
- * operands is cast to long long (usually just prior to the "*" so as
- * not to confuse it into thinking it really has a 64-bit operand,
- * which, buy the way, it can do, but it takes more code and at least 2
- * mpys).
-
- * We also need to be aware that one second in nanoseconds is only a
- * couple of bits away from overflowing a 32-bit word, so we MUST use
- * 64-bits to get the full range time in nanoseconds.
-
- */
-
-/*
- * Here are the scales we will use.  One for seconds, nanoseconds and
- * microseconds.
- *
- * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
- * check if the sign bit is set.  If not, we bump the shift count by 1.
- * (Gets an extra bit of precision where we can use it.)
- * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
- * Haven't tested others.
-
- * Limits of cpp (for #if expressions) only long (no long long), but
- * then we only need the most signicant bit.
- */
-
-#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
-#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
-#undef SEC_JIFFIE_SC
-#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
-#endif
-#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
-#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
-                                TICK_NSEC -1) / (u64)TICK_NSEC))
-
-#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
-                                        TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION  \
-                    ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
-                                        TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion.  See there
- * for more details.  It is the scaled resolution rounding value.  Note
- * that it is a 64-bit value.  Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
-/*
- * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
- * into seconds.  The 64-bit case will overflow if we are not careful,
- * so use the messy SH_DIV macro to do it.  Still all constants.
- */
-#if BITS_PER_LONG < 64
-# define MAX_SEC_IN_JIFFIES \
-	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
-#else	/* take care of overflow on 64 bits machines */
-# define MAX_SEC_IN_JIFFIES \
-	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
-
-#endif
-
-/*
- * Convert various time units to each other:
- */
-extern unsigned int jiffies_to_msecs(const unsigned long j);
-extern unsigned int jiffies_to_usecs(const unsigned long j);
-extern unsigned long msecs_to_jiffies(const unsigned int m);
-extern unsigned long usecs_to_jiffies(const unsigned int u);
-extern unsigned long timespec_to_jiffies(const struct timespec *value);
-extern void jiffies_to_timespec(const unsigned long jiffies,
-				struct timespec *value);
-extern unsigned long timeval_to_jiffies(const struct timeval *value);
-extern void jiffies_to_timeval(const unsigned long jiffies,
-			       struct timeval *value);
-extern clock_t jiffies_to_clock_t(unsigned long x);
-extern unsigned long clock_t_to_jiffies(unsigned long x);
-extern u64 jiffies_64_to_clock_t(u64 x);
-extern u64 nsec_to_clock_t(u64 x);
-extern u64 nsecs_to_jiffies64(u64 n);
-extern unsigned long nsecs_to_jiffies(u64 n);
-
-#define TIMESTAMP_SIZE	30
-
-#endif