init android origin source code

1 files changed, 476 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/include/linux/edac.h b/ANDROID_3.4.5/include/linux/edac.h
new file mode 100644
index 00000000..c621d762
--- /dev/null
+++ b/ANDROID_3.4.5/include/linux/edac.h
@@ -0,0 +1,476 @@
+/*
+ * Generic EDAC defs
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+#ifndef _LINUX_EDAC_H_
+#define _LINUX_EDAC_H_
+
+#include <linux/atomic.h>
+#include <linux/kobject.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+
+struct device;
+
+#define EDAC_OPSTATE_INVAL	-1
+#define EDAC_OPSTATE_POLL	0
+#define EDAC_OPSTATE_NMI	1
+#define EDAC_OPSTATE_INT	2
+
+extern int edac_op_state;
+extern int edac_err_assert;
+extern atomic_t edac_handlers;
+extern struct bus_type edac_subsys;
+
+extern int edac_handler_set(void);
+extern void edac_atomic_assert_error(void);
+extern struct bus_type *edac_get_sysfs_subsys(void);
+extern void edac_put_sysfs_subsys(void);
+
+static inline void opstate_init(void)
+{
+	switch (edac_op_state) {
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_NMI:
+		break;
+	default:
+		edac_op_state = EDAC_OPSTATE_POLL;
+	}
+	return;
+}
+
+#define EDAC_MC_LABEL_LEN	31
+#define MC_PROC_NAME_MAX_LEN	7
+
+/* memory devices */
+enum dev_type {
+	DEV_UNKNOWN = 0,
+	DEV_X1,
+	DEV_X2,
+	DEV_X4,
+	DEV_X8,
+	DEV_X16,
+	DEV_X32,		/* Do these parts exist? */
+	DEV_X64			/* Do these parts exist? */
+};
+
+#define DEV_FLAG_UNKNOWN	BIT(DEV_UNKNOWN)
+#define DEV_FLAG_X1		BIT(DEV_X1)
+#define DEV_FLAG_X2		BIT(DEV_X2)
+#define DEV_FLAG_X4		BIT(DEV_X4)
+#define DEV_FLAG_X8		BIT(DEV_X8)
+#define DEV_FLAG_X16		BIT(DEV_X16)
+#define DEV_FLAG_X32		BIT(DEV_X32)
+#define DEV_FLAG_X64		BIT(DEV_X64)
+
+/**
+ * enum mem_type - memory types. For a more detailed reference, please see
+ *			http://en.wikipedia.org/wiki/DRAM
+ *
+ * @MEM_EMPTY		Empty csrow
+ * @MEM_RESERVED:	Reserved csrow type
+ * @MEM_UNKNOWN:	Unknown csrow type
+ * @MEM_FPM:		FPM - Fast Page Mode, used on systems up to 1995.
+ * @MEM_EDO:		EDO - Extended data out, used on systems up to 1998.
+ * @MEM_BEDO:		BEDO - Burst Extended data out, an EDO variant.
+ * @MEM_SDR:		SDR - Single data rate SDRAM
+ *			http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
+ *			They use 3 pins for chip select: Pins 0 and 2 are
+ *			for rank 0; pins 1 and 3 are for rank 1, if the memory
+ *			is dual-rank.
+ * @MEM_RDR:		Registered SDR SDRAM
+ * @MEM_DDR:		Double data rate SDRAM
+ *			http://en.wikipedia.org/wiki/DDR_SDRAM
+ * @MEM_RDDR:		Registered Double data rate SDRAM
+ *			This is a variant of the DDR memories.
+ *			A registered memory has a buffer inside it, hiding
+ *			part of the memory details to the memory controller.
+ * @MEM_RMBS:		Rambus DRAM, used on a few Pentium III/IV controllers.
+ * @MEM_DDR2:		DDR2 RAM, as described at JEDEC JESD79-2F.
+ *			Those memories are labed as "PC2-" instead of "PC" to
+ *			differenciate from DDR.
+ * @MEM_FB_DDR2:	Fully-Buffered DDR2, as described at JEDEC Std No. 205
+ *			and JESD206.
+ *			Those memories are accessed per DIMM slot, and not by
+ *			a chip select signal.
+ * @MEM_RDDR2:		Registered DDR2 RAM
+ *			This is a variant of the DDR2 memories.
+ * @MEM_XDR:		Rambus XDR
+ *			It is an evolution of the original RAMBUS memories,
+ *			created to compete with DDR2. Weren't used on any
+ *			x86 arch, but cell_edac PPC memory controller uses it.
+ * @MEM_DDR3:		DDR3 RAM
+ * @MEM_RDDR3:		Registered DDR3 RAM
+ *			This is a variant of the DDR3 memories.
+ */
+enum mem_type {
+	MEM_EMPTY = 0,
+	MEM_RESERVED,
+	MEM_UNKNOWN,
+	MEM_FPM,
+	MEM_EDO,
+	MEM_BEDO,
+	MEM_SDR,
+	MEM_RDR,
+	MEM_DDR,
+	MEM_RDDR,
+	MEM_RMBS,
+	MEM_DDR2,
+	MEM_FB_DDR2,
+	MEM_RDDR2,
+	MEM_XDR,
+	MEM_DDR3,
+	MEM_RDDR3,
+};
+
+#define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
+#define MEM_FLAG_RESERVED	BIT(MEM_RESERVED)
+#define MEM_FLAG_UNKNOWN	BIT(MEM_UNKNOWN)
+#define MEM_FLAG_FPM		BIT(MEM_FPM)
+#define MEM_FLAG_EDO		BIT(MEM_EDO)
+#define MEM_FLAG_BEDO		BIT(MEM_BEDO)
+#define MEM_FLAG_SDR		BIT(MEM_SDR)
+#define MEM_FLAG_RDR		BIT(MEM_RDR)
+#define MEM_FLAG_DDR		BIT(MEM_DDR)
+#define MEM_FLAG_RDDR		BIT(MEM_RDDR)
+#define MEM_FLAG_RMBS		BIT(MEM_RMBS)
+#define MEM_FLAG_DDR2           BIT(MEM_DDR2)
+#define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
+#define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
+#define MEM_FLAG_XDR            BIT(MEM_XDR)
+#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
+
+/* chipset Error Detection and Correction capabilities and mode */
+enum edac_type {
+	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
+	EDAC_NONE,		/* Doesn't support ECC */
+	EDAC_RESERVED,		/* Reserved ECC type */
+	EDAC_PARITY,		/* Detects parity errors */
+	EDAC_EC,		/* Error Checking - no correction */
+	EDAC_SECDED,		/* Single bit error correction, Double detection */
+	EDAC_S2ECD2ED,		/* Chipkill x2 devices - do these exist? */
+	EDAC_S4ECD4ED,		/* Chipkill x4 devices */
+	EDAC_S8ECD8ED,		/* Chipkill x8 devices */
+	EDAC_S16ECD16ED,	/* Chipkill x16 devices */
+};
+
+#define EDAC_FLAG_UNKNOWN	BIT(EDAC_UNKNOWN)
+#define EDAC_FLAG_NONE		BIT(EDAC_NONE)
+#define EDAC_FLAG_PARITY	BIT(EDAC_PARITY)
+#define EDAC_FLAG_EC		BIT(EDAC_EC)
+#define EDAC_FLAG_SECDED	BIT(EDAC_SECDED)
+#define EDAC_FLAG_S2ECD2ED	BIT(EDAC_S2ECD2ED)
+#define EDAC_FLAG_S4ECD4ED	BIT(EDAC_S4ECD4ED)
+#define EDAC_FLAG_S8ECD8ED	BIT(EDAC_S8ECD8ED)
+#define EDAC_FLAG_S16ECD16ED	BIT(EDAC_S16ECD16ED)
+
+/* scrubbing capabilities */
+enum scrub_type {
+	SCRUB_UNKNOWN = 0,	/* Unknown if scrubber is available */
+	SCRUB_NONE,		/* No scrubber */
+	SCRUB_SW_PROG,		/* SW progressive (sequential) scrubbing */
+	SCRUB_SW_SRC,		/* Software scrub only errors */
+	SCRUB_SW_PROG_SRC,	/* Progressive software scrub from an error */
+	SCRUB_SW_TUNABLE,	/* Software scrub frequency is tunable */
+	SCRUB_HW_PROG,		/* HW progressive (sequential) scrubbing */
+	SCRUB_HW_SRC,		/* Hardware scrub only errors */
+	SCRUB_HW_PROG_SRC,	/* Progressive hardware scrub from an error */
+	SCRUB_HW_TUNABLE	/* Hardware scrub frequency is tunable */
+};
+
+#define SCRUB_FLAG_SW_PROG	BIT(SCRUB_SW_PROG)
+#define SCRUB_FLAG_SW_SRC	BIT(SCRUB_SW_SRC)
+#define SCRUB_FLAG_SW_PROG_SRC	BIT(SCRUB_SW_PROG_SRC)
+#define SCRUB_FLAG_SW_TUN	BIT(SCRUB_SW_SCRUB_TUNABLE)
+#define SCRUB_FLAG_HW_PROG	BIT(SCRUB_HW_PROG)
+#define SCRUB_FLAG_HW_SRC	BIT(SCRUB_HW_SRC)
+#define SCRUB_FLAG_HW_PROG_SRC	BIT(SCRUB_HW_PROG_SRC)
+#define SCRUB_FLAG_HW_TUN	BIT(SCRUB_HW_TUNABLE)
+
+/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
+
+/* EDAC internal operation states */
+#define	OP_ALLOC		0x100
+#define OP_RUNNING_POLL		0x201
+#define OP_RUNNING_INTERRUPT	0x202
+#define OP_RUNNING_POLL_INTR	0x203
+#define OP_OFFLINE		0x300
+
+/*
+ * Concepts used at the EDAC subsystem
+ *
+ * There are several things to be aware of that aren't at all obvious:
+ *
+ * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
+ *
+ * These are some of the many terms that are thrown about that don't always
+ * mean what people think they mean (Inconceivable!).  In the interest of
+ * creating a common ground for discussion, terms and their definitions
+ * will be established.
+ *
+ * Memory devices:	The individual DRAM chips on a memory stick.  These
+ *			devices commonly output 4 and 8 bits each (x4, x8).
+ *			Grouping several of these in parallel provides the
+ *			number of bits that the memory controller expects:
+ *			typically 72 bits, in order to provide 64 bits +
+ *			8 bits of ECC data.
+ *
+ * Memory Stick:	A printed circuit board that aggregates multiple
+ *			memory devices in parallel.  In general, this is the
+ *			Field Replaceable Unit (FRU) which gets replaced, in
+ *			the case of excessive errors. Most often it is also
+ *			called DIMM (Dual Inline Memory Module).
+ *
+ * Memory Socket:	A physical connector on the motherboard that accepts
+ *			a single memory stick. Also called as "slot" on several
+ *			datasheets.
+ *
+ * Channel:		A memory controller channel, responsible to communicate
+ *			with a group of DIMMs. Each channel has its own
+ *			independent control (command) and data bus, and can
+ *			be used independently or grouped with other channels.
+ *
+ * Branch:		It is typically the highest hierarchy on a
+ *			Fully-Buffered DIMM memory controller.
+ *			Typically, it contains two channels.
+ *			Two channels at the same branch can be used in single
+ *			mode or in lockstep mode.
+ *			When lockstep is enabled, the cacheline is doubled,
+ *			but it generally brings some performance penalty.
+ *			Also, it is generally not possible to point to just one
+ *			memory stick when an error occurs, as the error
+ *			correction code is calculated using two DIMMs instead
+ *			of one. Due to that, it is capable of correcting more
+ *			errors than on single mode.
+ *
+ * Single-channel:	The data accessed by the memory controller is contained
+ *			into one dimm only. E. g. if the data is 64 bits-wide,
+ *			the data flows to the CPU using one 64 bits parallel
+ *			access.
+ *			Typically used with SDR, DDR, DDR2 and DDR3 memories.
+ *			FB-DIMM and RAMBUS use a different concept for channel,
+ *			so this concept doesn't apply there.
+ *
+ * Double-channel:	The data size accessed by the memory controller is
+ *			interlaced into two dimms, accessed at the same time.
+ *			E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
+ *			the data flows to the CPU using a 128 bits parallel
+ *			access.
+ *
+ * Chip-select row:	This is the name of the DRAM signal used to select the
+ *			DRAM ranks to be accessed. Common chip-select rows for
+ *			single channel are 64 bits, for dual channel 128 bits.
+ *			It may not be visible by the memory controller, as some
+ *			DIMM types have a memory buffer that can hide direct
+ *			access to it from the Memory Controller.
+ *
+ * Single-Ranked stick:	A Single-ranked stick has 1 chip-select row of memory.
+ *			Motherboards commonly drive two chip-select pins to
+ *			a memory stick. A single-ranked stick, will occupy
+ *			only one of those rows. The other will be unused.
+ *
+ * Double-Ranked stick:	A double-ranked stick has two chip-select rows which
+ *			access different sets of memory devices.  The two
+ *			rows cannot be accessed concurrently.
+ *
+ * Double-sided stick:	DEPRECATED TERM, see Double-Ranked stick.
+ *			A double-sided stick has two chip-select rows which
+ *			access different sets of memory devices. The two
+ *			rows cannot be accessed concurrently. "Double-sided"
+ *			is irrespective of the memory devices being mounted
+ *			on both sides of the memory stick.
+ *
+ * Socket set:		All of the memory sticks that are required for
+ *			a single memory access or all of the memory sticks
+ *			spanned by a chip-select row.  A single socket set
+ *			has two chip-select rows and if double-sided sticks
+ *			are used these will occupy those chip-select rows.
+ *
+ * Bank:		This term is avoided because it is unclear when
+ *			needing to distinguish between chip-select rows and
+ *			socket sets.
+ *
+ * Controller pages:
+ *
+ * Physical pages:
+ *
+ * Virtual pages:
+ *
+ *
+ * STRUCTURE ORGANIZATION AND CHOICES
+ *
+ *
+ *
+ * PS - I enjoyed writing all that about as much as you enjoyed reading it.
+ */
+
+/**
+ * struct rank_info - contains the information for one DIMM rank
+ *
+ * @chan_idx:	channel number where the rank is (typically, 0 or 1)
+ * @ce_count:	number of correctable errors for this rank
+ * @label:	DIMM label. Different ranks for the same DIMM should be
+ *		filled, on userspace, with the same label.
+ *		FIXME: The core currently won't enforce it.
+ * @csrow:	A pointer to the chip select row structure (the parent
+ *		structure). The location of the rank is given by
+ *		the (csrow->csrow_idx, chan_idx) vector.
+ */
+struct rank_info {
+	int chan_idx;
+	u32 ce_count;
+	char label[EDAC_MC_LABEL_LEN + 1];
+	struct csrow_info *csrow;	/* the parent */
+};
+
+struct csrow_info {
+	unsigned long first_page;	/* first page number in dimm */
+	unsigned long last_page;	/* last page number in dimm */
+	unsigned long page_mask;	/* used for interleaving -
+					 * 0UL for non intlv
+					 */
+	u32 nr_pages;		/* number of pages in csrow */
+	u32 grain;		/* granularity of reported error in bytes */
+	int csrow_idx;		/* the chip-select row */
+	enum dev_type dtype;	/* memory device type */
+	u32 ue_count;		/* Uncorrectable Errors for this csrow */
+	u32 ce_count;		/* Correctable Errors for this csrow */
+	enum mem_type mtype;	/* memory csrow type */
+	enum edac_type edac_mode;	/* EDAC mode for this csrow */
+	struct mem_ctl_info *mci;	/* the parent */
+
+	struct kobject kobj;	/* sysfs kobject for this csrow */
+
+	/* channel information for this csrow */
+	u32 nr_channels;
+	struct rank_info *channels;
+};
+
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	const struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
+/* mcidev_sysfs_attribute structure
+ *	used for driver sysfs attributes and in mem_ctl_info
+ * 	sysfs top level entries
+ */
+struct mcidev_sysfs_attribute {
+	/* It should use either attr or grp */
+	struct attribute attr;
+	const struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
+        ssize_t (*show)(struct mem_ctl_info *,char *);
+        ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
+};
+
+/* MEMORY controller information structure
+ */
+struct mem_ctl_info {
+	struct list_head link;	/* for global list of mem_ctl_info structs */
+
+	struct module *owner;	/* Module owner of this control struct */
+
+	unsigned long mtype_cap;	/* memory types supported by mc */
+	unsigned long edac_ctl_cap;	/* Mem controller EDAC capabilities */
+	unsigned long edac_cap;	/* configuration capabilities - this is
+				 * closely related to edac_ctl_cap.  The
+				 * difference is that the controller may be
+				 * capable of s4ecd4ed which would be listed
+				 * in edac_ctl_cap, but if channels aren't
+				 * capable of s4ecd4ed then the edac_cap would
+				 * not have that capability.
+				 */
+	unsigned long scrub_cap;	/* chipset scrub capabilities */
+	enum scrub_type scrub_mode;	/* current scrub mode */
+
+	/* Translates sdram memory scrub rate given in bytes/sec to the
+	   internal representation and configures whatever else needs
+	   to be configured.
+	 */
+	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
+
+	/* Get the current sdram memory scrub rate from the internal
+	   representation and converts it to the closest matching
+	   bandwidth in bytes/sec.
+	 */
+	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
+
+
+	/* pointer to edac checking routine */
+	void (*edac_check) (struct mem_ctl_info * mci);
+
+	/*
+	 * Remaps memory pages: controller pages to physical pages.
+	 * For most MC's, this will be NULL.
+	 */
+	/* FIXME - why not send the phys page to begin with? */
+	unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
+					   unsigned long page);
+	int mc_idx;
+	int nr_csrows;
+	struct csrow_info *csrows;
+	/*
+	 * FIXME - what about controllers on other busses? - IDs must be
+	 * unique.  dev pointer should be sufficiently unique, but
+	 * BUS:SLOT.FUNC numbers may not be unique.
+	 */
+	struct device *dev;
+	const char *mod_name;
+	const char *mod_ver;
+	const char *ctl_name;
+	const char *dev_name;
+	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
+	void *pvt_info;
+	u32 ue_noinfo_count;	/* Uncorrectable Errors w/o info */
+	u32 ce_noinfo_count;	/* Correctable Errors w/o info */
+	u32 ue_count;		/* Total Uncorrectable Errors for this MC */
+	u32 ce_count;		/* Total Correctable Errors for this MC */
+	unsigned long start_time;	/* mci load start time (in jiffies) */
+
+	struct completion complete;
+
+	/* edac sysfs device control */
+	struct kobject edac_mci_kobj;
+
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
+
+	/* Additional top controller level attributes, but specified
+	 * by the low level driver.
+	 *
+	 * Set by the low level driver to provide attributes at the
+	 * controller level, same level as 'ue_count' and 'ce_count' above.
+	 * An array of structures, NULL terminated
+	 *
+	 * If attributes are desired, then set to array of attributes
+	 * If no attributes are desired, leave NULL
+	 */
+	const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
+
+	/* work struct for this MC */
+	struct delayed_work work;
+
+	/* the internal state of this controller instance */
+	int op_state;
+};
+
+#endif