Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 85 deletions

diff --git a/ANDROID_3.4.5/include/linux/dtlk.h b/ANDROID_3.4.5/include/linux/dtlk.h
deleted file mode 100644
index 22a7b9a5..00000000
--- a/ANDROID_3.4.5/include/linux/dtlk.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#define DTLK_MINOR	0
-#define DTLK_IO_EXTENT	0x02
-
-	/* ioctl's use magic number of 0xa3 */
-#define DTLK_INTERROGATE 0xa390	/* get settings from the DoubleTalk */
-#define DTLK_STATUS 0xa391	/* get status from the DoubleTalk */
-
-
-#define DTLK_CLEAR 0x18		/* stops speech */
-
-#define DTLK_MAX_RETRIES (loops_per_jiffy/(10000/HZ))
-
-	/* TTS Port Status Flags */
-#define TTS_READABLE     0x80	/* mask for bit which is nonzero if a
-				   byte can be read from the TTS port */
-#define TTS_SPEAKING     0x40	/* mask for SYNC bit, which is nonzero
-				   while DoubleTalk is producing
-				   output with TTS, PCM or CVSD
-				   synthesizers or tone generators
-				   (that is, all but LPC) */
-#define TTS_SPEAKING2    0x20	/* mask for SYNC2 bit,
-				   which falls to zero up to 0.4 sec
-				   before speech stops */
-#define TTS_WRITABLE     0x10	/* mask for RDY bit, which when set to
-             			   1, indicates the TTS port is ready
-             			   to accept a byte of data.  The RDY
-             			   bit goes zero 2-3 usec after
-             			   writing, and goes 1 again 180-190
-             			   usec later. */
-#define TTS_ALMOST_FULL  0x08	/* mask for AF bit: When set to 1,
-				   indicates that less than 300 free
-				   bytes are available in the TTS
-				   input buffer. AF is always 0 in the
-				   PCM, TGN and CVSD modes. */
-#define TTS_ALMOST_EMPTY 0x04	/* mask for AE bit: When set to 1,
-				   indicates that less than 300 bytes
-				   of data remain in DoubleTalk's
-				   input (TTS or PCM) buffer. AE is
-				   always 1 in the TGN and CVSD
-				   modes. */
-
-	/* LPC speak commands */
-#define LPC_5220_NORMAL 0x60	/* 5220 format decoding table, normal rate */
-#define LPC_5220_FAST 0x64	/* 5220 format decoding table, fast rate */
-#define LPC_D6_NORMAL 0x20	/* D6 format decoding table, normal rate */
-#define LPC_D6_FAST 0x24	/* D6 format decoding table, fast rate */
-
-	/* LPC Port Status Flags (valid only after one of the LPC
-           speak commands) */
-#define LPC_SPEAKING     0x80	/* mask for TS bit: When set to 1,
-				   indicates the LPC synthesizer is
-				   producing speech.*/
-#define LPC_BUFFER_LOW   0x40	/* mask for BL bit: When set to 1,
-				   indicates that the hardware LPC
-				   data buffer has less than 30 bytes
-				   remaining. (Total internal buffer
-				   size = 4096 bytes.) */
-#define LPC_BUFFER_EMPTY 0x20	/* mask for BE bit: When set to 1,
-				   indicates that the LPC data buffer
-				   ran out of data (error condition if
-				   TS is also 1).  */
-
-				/* data returned by Interrogate command */
-struct dtlk_settings
-{
-  unsigned short serial_number;	/* 0-7Fh:0-7Fh */
-  unsigned char rom_version[24]; /* null terminated string */
-  unsigned char mode;		/* 0=Character; 1=Phoneme; 2=Text */
-  unsigned char punc_level;	/* nB; 0-7 */
-  unsigned char formant_freq;	/* nF; 0-9 */
-  unsigned char pitch;		/* nP; 0-99 */
-  unsigned char speed;		/* nS; 0-9 */
-  unsigned char volume;		/* nV; 0-9 */
-  unsigned char tone;		/* nX; 0-2 */
-  unsigned char expression;	/* nE; 0-9 */
-  unsigned char ext_dict_loaded; /* 1=exception dictionary loaded */
-  unsigned char ext_dict_status; /* 1=exception dictionary enabled */
-  unsigned char free_ram;	/* # pages (truncated) remaining for
-                                   text buffer */
-  unsigned char articulation;	/* nA; 0-9 */
-  unsigned char reverb;		/* nR; 0-9 */
-  unsigned char eob;		/* 7Fh value indicating end of
-                                   parameter block */
-  unsigned char has_indexing;	/* nonzero if indexing is implemented */
-};