Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

13 files changed, 0 insertions, 804 deletions

diff --git a/ANDROID_3.4.5/include/linux/can/Kbuild b/ANDROID_3.4.5/include/linux/can/Kbuild
deleted file mode 100644
index c62b7f17..00000000
--- a/ANDROID_3.4.5/include/linux/can/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-header-y += raw.h
-header-y += bcm.h
-header-y += gw.h
-header-y += error.h
-header-y += netlink.h
diff --git a/ANDROID_3.4.5/include/linux/can/bcm.h b/ANDROID_3.4.5/include/linux/can/bcm.h
deleted file mode 100644
index 3ebe387f..00000000
--- a/ANDROID_3.4.5/include/linux/can/bcm.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/can/bcm.h
- *
- * Definitions for CAN Broadcast Manager (BCM)
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_BCM_H
-#define CAN_BCM_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-/**
- * struct bcm_msg_head - head of messages to/from the broadcast manager
- * @opcode:    opcode, see enum below.
- * @flags:     special flags, see below.
- * @count:     number of frames to send before changing interval.
- * @ival1:     interval for the first @count frames.
- * @ival2:     interval for the following frames.
- * @can_id:    CAN ID of frames to be sent or received.
- * @nframes:   number of frames appended to the message head.
- * @frames:    array of CAN frames.
- */
-struct bcm_msg_head {
-	__u32 opcode;
-	__u32 flags;
-	__u32 count;
-	struct timeval ival1, ival2;
-	canid_t can_id;
-	__u32 nframes;
-	struct can_frame frames[0];
-};
-
-enum {
-	TX_SETUP = 1,	/* create (cyclic) transmission task */
-	TX_DELETE,	/* remove (cyclic) transmission task */
-	TX_READ,	/* read properties of (cyclic) transmission task */
-	TX_SEND,	/* send one CAN frame */
-	RX_SETUP,	/* create RX content filter subscription */
-	RX_DELETE,	/* remove RX content filter subscription */
-	RX_READ,	/* read properties of RX content filter subscription */
-	TX_STATUS,	/* reply to TX_READ request */
-	TX_EXPIRED,	/* notification on performed transmissions (count=0) */
-	RX_STATUS,	/* reply to RX_READ request */
-	RX_TIMEOUT,	/* cyclic message is absent */
-	RX_CHANGED	/* updated CAN frame (detected content change) */
-};
-
-#define SETTIMER            0x0001
-#define STARTTIMER          0x0002
-#define TX_COUNTEVT         0x0004
-#define TX_ANNOUNCE         0x0008
-#define TX_CP_CAN_ID        0x0010
-#define RX_FILTER_ID        0x0020
-#define RX_CHECK_DLC        0x0040
-#define RX_NO_AUTOTIMER     0x0080
-#define RX_ANNOUNCE_RESUME  0x0100
-#define TX_RESET_MULTI_IDX  0x0200
-#define RX_RTR_FRAME        0x0400
-
-#endif /* CAN_BCM_H */
diff --git a/ANDROID_3.4.5/include/linux/can/core.h b/ANDROID_3.4.5/include/linux/can/core.h
deleted file mode 100644
index 0ccc1cd2..00000000
--- a/ANDROID_3.4.5/include/linux/can/core.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/can/core.h
- *
- * Protoypes and definitions for CAN protocol modules using the PF_CAN core
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_CORE_H
-#define CAN_CORE_H
-
-#include <linux/can.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-#define CAN_VERSION "20090105"
-
-/* increment this number each time you change some user-space interface */
-#define CAN_ABI_VERSION "8"
-
-#define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION
-
-#define DNAME(dev) ((dev) ? (dev)->name : "any")
-
-/**
- * struct can_proto - CAN protocol structure
- * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
- * @protocol:   protocol number in socket() syscall.
- * @ops:        pointer to struct proto_ops for sock->ops.
- * @prot:       pointer to struct proto structure.
- */
-struct can_proto {
-	int type;
-	int protocol;
-	const struct proto_ops *ops;
-	struct proto *prot;
-};
-
-/* function prototypes for the CAN networklayer core (af_can.c) */
-
-extern int  can_proto_register(const struct can_proto *cp);
-extern void can_proto_unregister(const struct can_proto *cp);
-
-extern int  can_rx_register(struct net_device *dev, canid_t can_id,
-			    canid_t mask,
-			    void (*func)(struct sk_buff *, void *),
-			    void *data, char *ident);
-
-extern void can_rx_unregister(struct net_device *dev, canid_t can_id,
-			      canid_t mask,
-			      void (*func)(struct sk_buff *, void *),
-			      void *data);
-
-extern int can_send(struct sk_buff *skb, int loop);
-extern int can_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
-
-#endif /* CAN_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/can/dev.h b/ANDROID_3.4.5/include/linux/can/dev.h
deleted file mode 100644
index 5d2efe7e..00000000
--- a/ANDROID_3.4.5/include/linux/can/dev.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/can/dev.h
- *
- * Definitions for the CAN network device driver interface
- *
- * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
- *               Varma Electronics Oy
- *
- * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
- *
- */
-
-#ifndef CAN_DEV_H
-#define CAN_DEV_H
-
-#include <linux/can.h>
-#include <linux/can/netlink.h>
-#include <linux/can/error.h>
-
-/*
- * CAN mode
- */
-enum can_mode {
-	CAN_MODE_STOP = 0,
-	CAN_MODE_START,
-	CAN_MODE_SLEEP
-};
-
-/*
- * CAN common private data
- */
-struct can_priv {
-	struct can_device_stats can_stats;
-
-	struct can_bittiming bittiming;
-	struct can_bittiming_const *bittiming_const;
-	struct can_clock clock;
-
-	enum can_state state;
-	u32 ctrlmode;
-	u32 ctrlmode_supported;
-
-	int restart_ms;
-	struct timer_list restart_timer;
-
-	int (*do_set_bittiming)(struct net_device *dev);
-	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
-	int (*do_get_state)(const struct net_device *dev,
-			    enum can_state *state);
-	int (*do_get_berr_counter)(const struct net_device *dev,
-				   struct can_berr_counter *bec);
-
-	unsigned int echo_skb_max;
-	struct sk_buff **echo_skb;
-};
-
-/*
- * get_can_dlc(value) - helper macro to cast a given data length code (dlc)
- * to __u8 and ensure the dlc value to be max. 8 bytes.
- *
- * To be used in the CAN netdriver receive path to ensure conformance with
- * ISO 11898-1 Chapter 8.4.2.3 (DLC field)
- */
-#define get_can_dlc(i)	(min_t(__u8, (i), 8))
-
-/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
-static inline int can_dropped_invalid_skb(struct net_device *dev,
-					  struct sk_buff *skb)
-{
-	const struct can_frame *cf = (struct can_frame *)skb->data;
-
-	if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) {
-		kfree_skb(skb);
-		dev->stats.tx_dropped++;
-		return 1;
-	}
-
-	return 0;
-}
-
-struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
-void free_candev(struct net_device *dev);
-
-int open_candev(struct net_device *dev);
-void close_candev(struct net_device *dev);
-
-int register_candev(struct net_device *dev);
-void unregister_candev(struct net_device *dev);
-
-int can_restart_now(struct net_device *dev);
-void can_bus_off(struct net_device *dev);
-
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
-		      unsigned int idx);
-unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
-void can_free_echo_skb(struct net_device *dev, unsigned int idx);
-
-struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
-struct sk_buff *alloc_can_err_skb(struct net_device *dev,
-				  struct can_frame **cf);
-
-#endif /* CAN_DEV_H */
diff --git a/ANDROID_3.4.5/include/linux/can/error.h b/ANDROID_3.4.5/include/linux/can/error.h
deleted file mode 100644
index 63e855ea..00000000
--- a/ANDROID_3.4.5/include/linux/can/error.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/can/error.h
- *
- * Definitions of the CAN error frame to be filtered and passed to the user.
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_ERROR_H
-#define CAN_ERROR_H
-
-#define CAN_ERR_DLC 8 /* dlc for error frames */
-
-/* error class (mask) in can_id */
-#define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
-#define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
-#define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
-#define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
-#define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
-#define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
-#define CAN_ERR_BUSOFF       0x00000040U /* bus off */
-#define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
-#define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
-
-/* arbitration lost in bit ... / data[0] */
-#define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
-				      /* else bit number in bitstream */
-
-/* error status of CAN-controller / data[1] */
-#define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
-#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
-#define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
-#define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
-#define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
-#define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
-				      /* (at least one error counter exceeds */
-				      /* the protocol-defined level of 127)  */
-
-/* error in CAN protocol (type) / data[2] */
-#define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_PROT_BIT         0x01 /* single bit error */
-#define CAN_ERR_PROT_FORM        0x02 /* frame format error */
-#define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
-#define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
-#define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
-#define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
-#define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
-
-/* error in CAN protocol (location) / data[3] */
-#define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
-#define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
-#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
-#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
-#define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
-#define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
-#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
-#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
-#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
-#define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
-#define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
-#define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
-#define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
-#define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
-#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
-#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
-#define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
-#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
-#define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
-#define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
-
-/* error status of CAN-transceiver / data[4] */
-/*                                             CANH CANL */
-#define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
-#define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
-#define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
-
-/* controller specific additional information / data[5..7] */
-
-#endif /* CAN_ERROR_H */
diff --git a/ANDROID_3.4.5/include/linux/can/gw.h b/ANDROID_3.4.5/include/linux/can/gw.h
deleted file mode 100644
index 8e1db18c..00000000
--- a/ANDROID_3.4.5/include/linux/can/gw.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/can/gw.h
- *
- * Definitions for CAN frame Gateway/Router/Bridge
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2011 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_GW_H
-#define CAN_GW_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-struct rtcanmsg {
-	__u8  can_family;
-	__u8  gwtype;
-	__u16 flags;
-};
-
-/* CAN gateway types */
-enum {
-	CGW_TYPE_UNSPEC,
-	CGW_TYPE_CAN_CAN,	/* CAN->CAN routing */
-	__CGW_TYPE_MAX
-};
-
-#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
-
-/* CAN rtnetlink attribute definitions */
-enum {
-	CGW_UNSPEC,
-	CGW_MOD_AND,	/* CAN frame modification binary AND */
-	CGW_MOD_OR,	/* CAN frame modification binary OR */
-	CGW_MOD_XOR,	/* CAN frame modification binary XOR */
-	CGW_MOD_SET,	/* CAN frame modification set alternate values */
-	CGW_CS_XOR,	/* set data[] XOR checksum into data[index] */
-	CGW_CS_CRC8,	/* set data[] CRC8 checksum into data[index] */
-	CGW_HANDLED,	/* number of handled CAN frames */
-	CGW_DROPPED,	/* number of dropped CAN frames */
-	CGW_SRC_IF,	/* ifindex of source network interface */
-	CGW_DST_IF,	/* ifindex of destination network interface */
-	CGW_FILTER,	/* specify struct can_filter on source CAN device */
-	__CGW_MAX
-};
-
-#define CGW_MAX (__CGW_MAX - 1)
-
-#define CGW_FLAGS_CAN_ECHO 0x01
-#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
-
-#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
-
-/* CAN frame elements that are affected by curr. 3 CAN frame modifications */
-#define CGW_MOD_ID	0x01
-#define CGW_MOD_DLC	0x02
-#define CGW_MOD_DATA	0x04
-
-#define CGW_FRAME_MODS 3 /* ID DLC DATA */
-
-#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
-
-struct cgw_frame_mod {
-	struct can_frame cf;
-	__u8 modtype;
-} __attribute__((packed));
-
-#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
-
-struct cgw_csum_xor {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_xor_val;
-} __attribute__((packed));
-
-struct cgw_csum_crc8 {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_crc_val;
-	__u8 final_xor_val;
-	__u8 crctab[256];
-	__u8 profile;
-	__u8 profile_data[20];
-} __attribute__((packed));
-
-/* length of checksum operation parameters. idx = index in CAN frame data[] */
-#define CGW_CS_XOR_LEN  sizeof(struct cgw_csum_xor)
-#define CGW_CS_CRC8_LEN  sizeof(struct cgw_csum_crc8)
-
-/* CRC8 profiles (compute CRC for additional data elements - see below) */
-enum {
-	CGW_CRC8PRF_UNSPEC,
-	CGW_CRC8PRF_1U8,	/* compute one additional u8 value */
-	CGW_CRC8PRF_16U8,	/* u8 value table indexed by data[1] & 0xF */
-	CGW_CRC8PRF_SFFID_XOR,	/* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
-	__CGW_CRC8PRF_MAX
-};
-
-#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
-
-/*
- * CAN rtnetlink attribute contents in detail
- *
- * CGW_XXX_IF (length 4 bytes):
- * Sets an interface index for source/destination network interfaces.
- * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
- *
- * CGW_FILTER (length 8 bytes):
- * Sets a CAN receive filter for the gateway job specified by the
- * struct can_filter described in include/linux/can.h
- *
- * CGW_MOD_XXX (length 17 bytes):
- * Specifies a modification that's done to a received CAN frame before it is
- * send out to the destination interface.
- *
- * <struct can_frame> data used as operator
- * <u8> affected CAN frame elements
- *
- * CGW_CS_XOR (length 4 bytes):
- * Set a simple XOR checksum starting with an initial value into
- * data[result-idx] using data[start-idx] .. data[end-idx]
- *
- * The XOR checksum is calculated like this:
- *
- * xor = init_xor_val
- *
- * for (i = from_idx .. to_idx)
- *      xor ^= can_frame.data[i]
- *
- * can_frame.data[ result_idx ] = xor
- *
- * CGW_CS_CRC8 (length 282 bytes):
- * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
- * a given initial value and a defined input data[start-idx] .. data[end-idx].
- * Finally the result value is XOR'ed with the final_xor_val.
- *
- * The CRC8 checksum is calculated like this:
- *
- * crc = init_crc_val
- *
- * for (i = from_idx .. to_idx)
- *      crc = crctab[ crc ^ can_frame.data[i] ]
- *
- * can_frame.data[ result_idx ] = crc ^ final_xor_val
- *
- * The calculated CRC may contain additional source data elements that can be
- * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
- * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
- * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
- * that are used depending on counter values inside the CAN frame data[].
- * So far only three profiles have been implemented for illustration.
- *
- * Remark: In general the attribute data is a linear buffer.
- *         Beware of sending unpacked or aligned structs!
- */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/can/netlink.h b/ANDROID_3.4.5/include/linux/can/netlink.h
deleted file mode 100644
index 14966ddb..00000000
--- a/ANDROID_3.4.5/include/linux/can/netlink.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/can/netlink.h
- *
- * Definitions for the CAN netlink interface
- *
- * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
- *
- */
-
-#ifndef CAN_NETLINK_H
-#define CAN_NETLINK_H
-
-#include <linux/types.h>
-
-/*
- * CAN bit-timing parameters
- *
- * For further information, please read chapter "8 BIT TIMING
- * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
- * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
- */
-struct can_bittiming {
-	__u32 bitrate;		/* Bit-rate in bits/second */
-	__u32 sample_point;	/* Sample point in one-tenth of a percent */
-	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
-	__u32 prop_seg;		/* Propagation segment in TQs */
-	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
-	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
-	__u32 sjw;		/* Synchronisation jump width in TQs */
-	__u32 brp;		/* Bit-rate prescaler */
-};
-
-/*
- * CAN harware-dependent bit-timing constant
- *
- * Used for calculating and checking bit-timing parameters
- */
-struct can_bittiming_const {
-	char name[16];		/* Name of the CAN controller hardware */
-	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
-	__u32 tseg1_max;
-	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
-	__u32 tseg2_max;
-	__u32 sjw_max;		/* Synchronisation jump width */
-	__u32 brp_min;		/* Bit-rate prescaler */
-	__u32 brp_max;
-	__u32 brp_inc;
-};
-
-/*
- * CAN clock parameters
- */
-struct can_clock {
-	__u32 freq;		/* CAN system clock frequency in Hz */
-};
-
-/*
- * CAN operational and error states
- */
-enum can_state {
-	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
-	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
-	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
-	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
-	CAN_STATE_STOPPED,		/* Device is stopped */
-	CAN_STATE_SLEEPING,		/* Device is sleeping */
-	CAN_STATE_MAX
-};
-
-/*
- * CAN bus error counters
- */
-struct can_berr_counter {
-	__u16 txerr;
-	__u16 rxerr;
-};
-
-/*
- * CAN controller mode
- */
-struct can_ctrlmode {
-	__u32 mask;
-	__u32 flags;
-};
-
-#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
-#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
-#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
-#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
-#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
-
-/*
- * CAN device statistics
- */
-struct can_device_stats {
-	__u32 bus_error;	/* Bus errors */
-	__u32 error_warning;	/* Changes to error warning state */
-	__u32 error_passive;	/* Changes to error passive state */
-	__u32 bus_off;		/* Changes to bus off state */
-	__u32 arbitration_lost; /* Arbitration lost errors */
-	__u32 restarts;		/* CAN controller re-starts */
-};
-
-/*
- * CAN netlink interface
- */
-enum {
-	IFLA_CAN_UNSPEC,
-	IFLA_CAN_BITTIMING,
-	IFLA_CAN_BITTIMING_CONST,
-	IFLA_CAN_CLOCK,
-	IFLA_CAN_STATE,
-	IFLA_CAN_CTRLMODE,
-	IFLA_CAN_RESTART_MS,
-	IFLA_CAN_RESTART,
-	IFLA_CAN_BERR_COUNTER,
-	__IFLA_CAN_MAX
-};
-
-#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
-
-#endif /* CAN_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/cc770.h b/ANDROID_3.4.5/include/linux/can/platform/cc770.h
deleted file mode 100644
index 7702641f..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/cc770.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _CAN_PLATFORM_CC770_H_
-#define _CAN_PLATFORM_CC770_H_
-
-/* CPU Interface Register (0x02) */
-#define CPUIF_CEN	0x01	/* Clock Out Enable */
-#define CPUIF_MUX	0x04	/* Multiplex */
-#define CPUIF_SLP	0x08	/* Sleep */
-#define CPUIF_PWD	0x10	/* Power Down Mode */
-#define CPUIF_DMC	0x20	/* Divide Memory Clock */
-#define CPUIF_DSC	0x40	/* Divide System Clock */
-#define CPUIF_RST	0x80	/* Hardware Reset Status */
-
-/* Clock Out Register (0x1f) */
-#define CLKOUT_CD_MASK  0x0f	/* Clock Divider mask */
-#define CLKOUT_SL_MASK	0x30	/* Slew Rate mask */
-#define CLKOUT_SL_SHIFT	4
-
-/* Bus Configuration Register (0x2f) */
-#define BUSCFG_DR0	0x01	/* Disconnect RX0 Input / Select RX input */
-#define BUSCFG_DR1	0x02	/* Disconnect RX1 Input / Silent mode */
-#define BUSCFG_DT1	0x08	/* Disconnect TX1 Output */
-#define BUSCFG_POL	0x20	/* Polarity dominant or recessive */
-#define BUSCFG_CBY	0x40	/* Input Comparator Bypass */
-
-struct cc770_platform_data {
-	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
-
-	u8 cir;		/* CPU Interface Register */
-	u8 cor;		/* Clock Out Register */
-	u8 bcr;		/* Bus Configuration Register */
-};
-
-#endif	/* !_CAN_PLATFORM_CC770_H_ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/flexcan.h b/ANDROID_3.4.5/include/linux/can/platform/flexcan.h
deleted file mode 100644
index 72b713ab..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/flexcan.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This file is released under the GPLv2
- *
- */
-
-#ifndef __CAN_PLATFORM_FLEXCAN_H
-#define __CAN_PLATFORM_FLEXCAN_H
-
-/**
- * struct flexcan_platform_data - flex CAN controller platform data
- * @transceiver_enable:         - called to power on/off the transceiver
- *
- */
-struct flexcan_platform_data {
-	void (*transceiver_switch)(int enable);
-};
-
-#endif /* __CAN_PLATFORM_FLEXCAN_H */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h b/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h
deleted file mode 100644
index 089fe432..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __CAN_PLATFORM_MCP251X_H__
-#define __CAN_PLATFORM_MCP251X_H__
-
-/*
- *
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
- *
- */
-
-#include <linux/spi/spi.h>
-
-/**
- * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
- * @oscillator_frequency:       - oscillator frequency in Hz
- * @irq_flags:                  - IRQF configuration flags
- * @board_specific_setup:       - called before probing the chip (power,reset)
- * @transceiver_enable:         - called to power on/off the transceiver
- * @power_enable:               - called to power on/off the mcp *and* the
- *                                transceiver
- *
- * Please note that you should define power_enable or transceiver_enable or
- * none of them. Defining both of them is no use.
- *
- */
-
-struct mcp251x_platform_data {
-	unsigned long oscillator_frequency;
-	unsigned long irq_flags;
-	int (*board_specific_setup)(struct spi_device *spi);
-	int (*transceiver_enable)(int enable);
-	int (*power_enable) (int enable);
-};
-
-#endif /* __CAN_PLATFORM_MCP251X_H__ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/sja1000.h b/ANDROID_3.4.5/include/linux/can/platform/sja1000.h
deleted file mode 100644
index 96f8fcc7..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/sja1000.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _CAN_PLATFORM_SJA1000_H_
-#define _CAN_PLATFORM_SJA1000_H_
-
-/* clock divider register */
-#define CDR_CLKOUT_MASK 0x07
-#define CDR_CLK_OFF	0x08 /* Clock off (CLKOUT pin) */
-#define CDR_RXINPEN	0x20 /* TX1 output is RX irq output */
-#define CDR_CBP		0x40 /* CAN input comparator bypass */
-#define CDR_PELICAN	0x80 /* PeliCAN mode */
-
-/* output control register */
-#define OCR_MODE_BIPHASE  0x00
-#define OCR_MODE_TEST     0x01
-#define OCR_MODE_NORMAL   0x02
-#define OCR_MODE_CLOCK    0x03
-#define OCR_MODE_MASK     0x07
-#define OCR_TX0_INVERT    0x04
-#define OCR_TX0_PULLDOWN  0x08
-#define OCR_TX0_PULLUP    0x10
-#define OCR_TX0_PUSHPULL  0x18
-#define OCR_TX1_INVERT    0x20
-#define OCR_TX1_PULLDOWN  0x40
-#define OCR_TX1_PULLUP    0x80
-#define OCR_TX1_PUSHPULL  0xc0
-#define OCR_TX_MASK       0xfc
-#define OCR_TX_SHIFT      2
-
-struct sja1000_platform_data {
-	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
-
-	u8 ocr;		/* output control register */
-	u8 cdr;		/* clock divider register */
-};
-
-#endif	/* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h b/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h
deleted file mode 100644
index af17cb3f..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __CAN_PLATFORM_TI_HECC_H__
-#define __CAN_PLATFORM_TI_HECC_H__
-
-/*
- * TI HECC (High End CAN Controller) driver platform header
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed as is WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-/**
- * struct hecc_platform_data - HECC Platform Data
- *
- * @scc_hecc_offset:	mostly 0 - should really never change
- * @scc_ram_offset:	SCC RAM offset
- * @hecc_ram_offset:	HECC RAM offset
- * @mbx_offset:		Mailbox RAM offset
- * @int_line:		Interrupt line to use - 0 or 1
- * @version:		version for future use
- * @transceiver_switch:	platform specific callback fn for transceiver control
- *
- * Platform data structure to get all platform specific settings.
- * this structure also accounts the fact that the IP may have different
- * RAM and mailbox offsets for different SOC's
- */
-struct ti_hecc_platform_data {
-	u32 scc_hecc_offset;
-	u32 scc_ram_offset;
-	u32 hecc_ram_offset;
-	u32 mbx_offset;
-	u32 int_line;
-	u32 version;
-	void (*transceiver_switch) (int);
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/can/raw.h b/ANDROID_3.4.5/include/linux/can/raw.h
deleted file mode 100644
index 781f3a37..00000000
--- a/ANDROID_3.4.5/include/linux/can/raw.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/can/raw.h
- *
- * Definitions for raw CAN sockets
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_RAW_H
-#define CAN_RAW_H
-
-#include <linux/can.h>
-
-#define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
-
-/* for socket options affecting the socket (not the global system) */
-
-enum {
-	CAN_RAW_FILTER = 1,	/* set 0 .. n can_filter(s)          */
-	CAN_RAW_ERR_FILTER,	/* set filter for error frames       */
-	CAN_RAW_LOOPBACK,	/* local loopback (default:on)       */
-	CAN_RAW_RECV_OWN_MSGS	/* receive my own msgs (default:off) */
-};
-
-#endif