Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 526 deletions

diff --git a/ANDROID_3.4.5/include/linux/atmdev.h b/ANDROID_3.4.5/include/linux/atmdev.h
deleted file mode 100644
index 06fd4bbc..00000000
--- a/ANDROID_3.4.5/include/linux/atmdev.h
+++ /dev/null
@@ -1,526 +0,0 @@
-/* atmdev.h - ATM device driver declarations and various related items */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef LINUX_ATMDEV_H
-#define LINUX_ATMDEV_H
-
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN		6
-
-#define ATM_OC3_PCR	(155520000/270*260/8/53)
-			/* OC3 link rate:  155520000 bps
-			   SONET overhead: /270*260 (9 section, 1 path)
-			   bits per cell:  /8/53
-			   max cell rate:  353207.547 cells/sec */
-#define ATM_25_PCR	((25600000/8-8000)/54)
-			/* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
-			/* OC12 link rate: 622080000 bps
-			   SONET overhead: /1080*1040
-			   bits per cell:  /8/53
-			   max cell rate:  1412830.188 cells/sec */
-#define ATM_DS3_PCR	(8000*12)
-			/* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
-    __HANDLE_ITEM(tx);			/* TX okay */ \
-    __HANDLE_ITEM(tx_err);		/* TX errors */ \
-    __HANDLE_ITEM(rx);			/* RX okay */ \
-    __HANDLE_ITEM(rx_err);		/* RX errors */ \
-    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
-	struct atm_aal_stats aal0;
-	struct atm_aal_stats aal34;
-	struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-					/* get link rate */
-#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-					/* get interface names (numbers) */
-#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-					/* get interface type name */
-#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-					/* get interface ESI */
-#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-					/* get itf's local ATM addr. list */
-#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-					/* reset itf's ATM address list */
-#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-					/* add a local ATM address */
-#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-					/* remove a local ATM address */
-#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-					/* get connection identifier range */
-#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-					/* set connection identifier range */
-#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-					/* set interface ESI */
-#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-					/* force interface ESI */
-#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
-					/* register a LECS address */
-#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
-					/* unregister a LECS address */
-#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
-					/* retrieve LECS address(es) */
-
-#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-					/* get AAL layer statistics */
-#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-					/* get AAL layer statistics and zero */
-#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-					/* get loopback mode */
-#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-					/* set loopback mode */
-#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-					/* query supported loopback modes */
-#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
-					/* enable or disable single-copy */
-#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-					/* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-					/* use backend to make new if */
-#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- 					/* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
-					/* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above.  In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW		0	
-#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
-#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
-#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
-/* RESERVED		4	loop back on PHY side  ---'		      */
-#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
-#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n)	((n) & 0xff)
-#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE	0	/* no loopback */
-
-#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
-	int length;
-	void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
- 
-struct atm_cirange {
-	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
-	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX	1024		/* enable RX single-copy */
-#define ATM_SC_TX	2048		/* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-				  anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED	 1	/* Block until change is effective */
-#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
-#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
-#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
-#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
-#define ATM_MF_BWD	32	/* Set the backward direction parameters */
-
-#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-			  ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE	0	/* VC is not used */
-#define ATM_VS_CONNECTED 1	/* VC is connected */
-#define ATM_VS_CLOSING	2	/* VC is closing */
-#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
-#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND	5	/* VC is bound */
-
-#define ATM_VS2TXT_MAP \
-    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
-    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
-    "RELEASED", "HASQOS",	"LISTEN",	"META", \
-    "256",	"512",		"1024",		"2048", \
-    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
-
-
-#ifdef __KERNEL__
-
-#include <linux/wait.h> /* wait_queue_head_t */
-#include <linux/time.h> /* struct timeval */
-#include <linux/net.h>
-#include <linux/bug.h>
-#include <linux/skbuff.h> /* struct sk_buff */
-#include <linux/uio.h>
-#include <net/sock.h>
-#include <linux/atomic.h>
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-
-extern struct proc_dir_entry *atm_proc_root;
-#endif
-
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-struct compat_atm_iobuf {
-	int length;
-	compat_uptr_t buffer;
-};
-#endif
-
-struct k_atm_aal_stats {
-#define __HANDLE_ITEM(i) atomic_t i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct k_atm_dev_stats {
-	struct k_atm_aal_stats aal0;
-	struct k_atm_aal_stats aal34;
-	struct k_atm_aal_stats aal5;
-};
-
-struct device;
-
-enum {
-	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
-				   by device driver. */
-	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
-				   driver, cleared by anybody. */
-	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
-				   setup), controlled by socket layer */
-	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
-				   socket layer */
-	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
-				   layer */
-	ATM_VF_RELEASED,	/* demon has indicated/requested release,
-				   controlled by SVC socket layer */
-	ATM_VF_HASQOS,		/* QOS parameters have been set */
-	ATM_VF_LISTEN,		/* socket is used for listening */
-	ATM_VF_META,		/* SVC socket isn't used for normal data
-				   traffic and doesn't depend on signaling
-				   to be available */
-	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
-	ATM_VF_HASSAP,		/* SAP has been set */
-	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
-	ATM_VF_WAITING,		/* waiting for reply from sigd */
-	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
-};
-
-
-#define ATM_VF2VS(flags) \
-    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
-     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
-     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
-     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
-     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
-
-
-enum {
-	ATM_DF_REMOVED,		/* device was removed from atm_devs list */
-};
-
-
-#define ATM_PHY_SIG_LOST    0	/* no carrier/light */
-#define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
-#define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
-
-#define ATM_ATMOPT_CLP	1	/* set CLP bit */
-
-struct atm_vcc {
-	/* struct sock has to be the first member of atm_vcc */
-	struct sock	sk;
-	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
-	short		vpi;		/* VPI and VCI (types must be equal */
-					/* with sockaddr) */
-	int 		vci;
-	unsigned long	aal_options;	/* AAL layer options */
-	unsigned long	atm_options;	/* ATM layer options */
-	struct atm_dev	*dev;		/* device back pointer */
-	struct atm_qos	qos;		/* QOS */
-	struct atm_sap	sap;		/* SAP */
-	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
-	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
-	int (*push_oam)(struct atm_vcc *vcc,void *cell);
-	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-	void		*dev_data;	/* per-device data */
-	void		*proto_data;	/* per-protocol data */
-	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
-	/* SVC part --- may move later ------------------------------------- */
-	short		itf;		/* interface number */
-	struct sockaddr_atmsvc local;
-	struct sockaddr_atmsvc remote;
-	/* Multipoint part ------------------------------------------------- */
-	struct atm_vcc	*session;	/* session VCC descriptor */
-	/* Other stuff ----------------------------------------------------- */
-	void		*user_back;	/* user backlink - not touched by */
-					/* native ATM stack. Currently used */
-					/* by CLIP and sch_atm. */
-};
-
-static inline struct atm_vcc *atm_sk(struct sock *sk)
-{
-	return (struct atm_vcc *)sk;
-}
-
-static inline struct atm_vcc *ATM_SD(struct socket *sock)
-{
-	return atm_sk(sock->sk);
-}
-
-static inline struct sock *sk_atm(struct atm_vcc *vcc)
-{
-	return (struct sock *)vcc;
-}
-
-struct atm_dev_addr {
-	struct sockaddr_atmsvc addr;	/* ATM address */
-	struct list_head entry;		/* next address */
-};
-
-enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
-
-struct atm_dev {
-	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
-	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
-					/* (NULL) */
-	const char	*type;		/* device type name */
-	int		number;		/* device index */
-	void		*dev_data;	/* per-device data */
-	void		*phy_data;	/* private PHY date */
-	unsigned long	flags;		/* device flags (ATM_DF_*) */
-	struct list_head local;		/* local ATM addresses */
-	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
-	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
-	struct atm_cirange ci_range;	/* VPI/VCI range */
-	struct k_atm_dev_stats stats;	/* statistics */
-	char		signal;		/* signal status (ATM_PHY_SIG_*) */
-	int		link_rate;	/* link rate (default: OC3) */
-	atomic_t	refcnt;		/* reference count */
-	spinlock_t	lock;		/* protect internal members */
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *proc_entry; /* proc entry */
-	char *proc_name;		/* proc entry name */
-#endif
-	struct device class_dev;	/* sysfs device */
-	struct list_head dev_list;	/* linkage */
-};
-
- 
-/* OF: send_Oam Flags */
-
-#define ATM_OF_IMMED  1		/* Attempt immediate delivery */
-#define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
-
-
-/*
- * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
- */
-
-struct atmdev_ops { /* only send is required */
-	void (*dev_close)(struct atm_dev *dev);
-	int (*open)(struct atm_vcc *vcc);
-	void (*close)(struct atm_vcc *vcc);
-	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
-#ifdef CONFIG_COMPAT
-	int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
-			    void __user *arg);
-#endif
-	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
-	    void __user *optval,int optlen);
-	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
-	    void __user *optval,unsigned int optlen);
-	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
-	void (*phy_put)(struct atm_dev *dev,unsigned char value,
-	    unsigned long addr);
-	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
-	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
-	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
-	struct module *owner;
-};
-
-struct atmphy_ops {
-	int (*start)(struct atm_dev *dev);
-	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
-	void (*interrupt)(struct atm_dev *dev);
-	int (*stop)(struct atm_dev *dev);
-};
-
-struct atm_skb_data {
-	struct atm_vcc	*vcc;		/* ATM VCC */
-	unsigned long	atm_options;	/* ATM layer options */
-};
-
-#define VCC_HTABLE_SIZE 32
-
-extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
-extern rwlock_t vcc_sklist_lock;
-
-#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-
-struct atm_dev *atm_dev_register(const char *type, struct device *parent,
-				 const struct atmdev_ops *ops,
-				 int number, /* -1 == pick first available */
-				 unsigned long *flags);
-struct atm_dev *atm_dev_lookup(int number);
-void atm_dev_deregister(struct atm_dev *dev);
-
-/* atm_dev_signal_change
- *
- * Propagate lower layer signal change in atm_dev->signal to netdevice.
- * The event will be sent via a notifier call chain.
- */
-void atm_dev_signal_change(struct atm_dev *dev, char signal);
-
-void vcc_insert_socket(struct sock *sk);
-
-void atm_dev_release_vccs(struct atm_dev *dev);
-
-
-static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
-{
-	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
-}
-
-
-static inline void atm_return(struct atm_vcc *vcc,int truesize)
-{
-	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
-}
-
-
-static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
-{
-	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
-	       sk_atm(vcc)->sk_sndbuf;
-}
-
-
-static inline void atm_dev_hold(struct atm_dev *dev)
-{
-	atomic_inc(&dev->refcnt);
-}
-
-
-static inline void atm_dev_put(struct atm_dev *dev)
-{
-	if (atomic_dec_and_test(&dev->refcnt)) {
-		BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
-		if (dev->ops->dev_close)
-			dev->ops->dev_close(dev);
-		put_device(&dev->class_dev);
-	}
-}
-
-
-int atm_charge(struct atm_vcc *vcc,int truesize);
-struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
-    gfp_t gfp_flags);
-int atm_pcr_goal(const struct atm_trafprm *tp);
-
-void vcc_release_async(struct atm_vcc *vcc, int reply);
-
-struct atm_ioctl {
-	struct module *owner;
-	/* A module reference is kept if appropriate over this call.
-	 * Return -ENOIOCTLCMD if you don't handle it. */
-	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
-	struct list_head list;
-};
-
-/**
- * register_atm_ioctl - register handler for ioctl operations
- *
- * Special (non-device) handlers of ioctl's should
- * register here. If you're a normal device, you should
- * set .ioctl in your atmdev_ops instead.
- */
-void register_atm_ioctl(struct atm_ioctl *);
-
-/**
- * deregister_atm_ioctl - remove the ioctl handler
- */
-void deregister_atm_ioctl(struct atm_ioctl *);
-
-
-/* register_atmdevice_notifier - register atm_dev notify events
- *
- * Clients like br2684 will register notify events
- * Currently we notify of signal found/lost
- */
-int register_atmdevice_notifier(struct notifier_block *nb);
-void unregister_atmdevice_notifier(struct notifier_block *nb);
-
-#endif /* __KERNEL__ */
-
-#endif