Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 130 deletions

diff --git a/ANDROID_3.4.5/drivers/video/omap/lcd_osk.c b/ANDROID_3.4.5/drivers/video/omap/lcd_osk.c
deleted file mode 100644
index 5914220d..00000000
--- a/ANDROID_3.4.5/drivers/video/omap/lcd_osk.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * LCD panel support for the TI OMAP OSK board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- * Adapted for OSK by <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/gpio.h>
-#include <plat/mux.h>
-#include "omapfb.h"
-
-static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
-	/* gpio2 was allocated in board init */
-	return 0;
-}
-
-static void osk_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static int osk_panel_enable(struct lcd_panel *panel)
-{
-	/* configure PWL pin */
-	omap_cfg_reg(PWL);
-
-	/* Enable PWL unit */
-	omap_writeb(0x01, OMAP_PWL_CLK_ENABLE);
-
-	/* Set PWL level */
-	omap_writeb(0xFF, OMAP_PWL_ENABLE);
-
-	/* set GPIO2 high (lcd power enabled) */
-	gpio_set_value(2, 1);
-
-	return 0;
-}
-
-static void osk_panel_disable(struct lcd_panel *panel)
-{
-	/* Set PWL level to zero */
-	omap_writeb(0x00, OMAP_PWL_ENABLE);
-
-	/* Disable PWL unit */
-	omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
-
-	/* set GPIO2 low */
-	gpio_set_value(2, 0);
-}
-
-static unsigned long osk_panel_get_caps(struct lcd_panel *panel)
-{
-	return 0;
-}
-
-struct lcd_panel osk_panel = {
-	.name		= "osk",
-	.config		= OMAP_LCDC_PANEL_TFT,
-
-	.bpp		= 16,
-	.data_lines	= 16,
-	.x_res		= 240,
-	.y_res		= 320,
-	.pixel_clock	= 12500,
-	.hsw		= 40,
-	.hfp		= 40,
-	.hbp		= 72,
-	.vsw		= 1,
-	.vfp		= 1,
-	.vbp		= 0,
-	.pcd		= 12,
-
-	.init		= osk_panel_init,
-	.cleanup	= osk_panel_cleanup,
-	.enable		= osk_panel_enable,
-	.disable	= osk_panel_disable,
-	.get_caps	= osk_panel_get_caps,
-};
-
-static int osk_panel_probe(struct platform_device *pdev)
-{
-	omapfb_register_panel(&osk_panel);
-	return 0;
-}
-
-static int osk_panel_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static int osk_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
-	return 0;
-}
-
-static int osk_panel_resume(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static struct platform_driver osk_panel_driver = {
-	.probe		= osk_panel_probe,
-	.remove		= osk_panel_remove,
-	.suspend	= osk_panel_suspend,
-	.resume		= osk_panel_resume,
-	.driver		= {
-		.name	= "lcd_osk",
-		.owner	= THIS_MODULE,
-	},
-};
-
-module_platform_driver(osk_panel_driver);