Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 326 deletions

diff --git a/ANDROID_3.4.5/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h b/ANDROID_3.4.5/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h
deleted file mode 100755
index a5cc0c99..00000000
--- a/ANDROID_3.4.5/drivers/net/wireless/rtl8188C_8192C/include/autoconf.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *                                        
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- *
- ******************************************************************************/
-
-/*
- * Public  General Config
- */
-#define AUTOCONF_INCLUDED
-#define RTL871X_MODULE_NAME "92CU"
-#define DRV_NAME "rtl8192cu"
-
-#define CONFIG_USB_HCI	1
-
-#define CONFIG_RTL8192C	1
-
-#define PLATFORM_LINUX	1
-
-#define CONFIG_IOCTL_CFG80211 1
-#ifdef CONFIG_PLATFORM_ARM_SUNxI
-	#ifndef CONFIG_IOCTL_CFG80211 
-		#define CONFIG_IOCTL_CFG80211 1
-	#endif
-#endif
-#ifdef CONFIG_IOCTL_CFG80211
-	#define RTW_USE_CFG80211_STA_EVENT /* Opne this for Android 4.1's wpa_supplicant */
-	#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
-	//#define CONFIG_DEBUG_CFG80211 1
-	//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
-	#define CONFIG_SET_SCAN_DENY_TIMER
-#endif
-
-/*
- * Internal  General Config
- */
-//#define CONFIG_PWRCTRL
-//#define CONFIG_H2CLBK
-
-#define CONFIG_EMBEDDED_FWIMG	1
-//#define CONFIG_FILE_FWIMG
-
-#ifdef CONFIG_WAKE_ON_WLAN
-#define CONFIG_WOWLAN 1
-#endif //CONFIG_WAKE_ON_WLAN
-
-#define CONFIG_R871X_TEST	1
-
-#define CONFIG_XMIT_ACK
-#ifdef CONFIG_XMIT_ACK
-	#define CONFIG_XMIT_ACK_POLLING
-	#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
-#endif
-
-#define CONFIG_80211N_HT	1
-
-#define CONFIG_RECV_REORDERING_CTRL	1
-
-//#define CONFIG_TCP_CSUM_OFFLOAD_RX	1
-
-//#define CONFIG_BEFORE_LINKED_DIG	
-//#define CONFIG_DRVEXT_MODULE	1
-
-#ifndef CONFIG_MP_INCLUDED
-	#define CONFIG_IPS	1
-	#ifdef CONFIG_IPS
-		//#define CONFIG_IPS_LEVEL_2	1 //enable this to set default IPS mode to IPS_LEVEL_2
-	#endif
-	
-	#define SUPPORT_HW_RFOFF_DETECTED	1
-
-	#define CONFIG_LPS	1
-	#define CONFIG_BT_COEXIST	1
-
-	//befor link
-	#define CONFIG_ANTENNA_DIVERSITY
-	
-	//after link
-	#ifdef CONFIG_ANTENNA_DIVERSITY
-		#define CONFIG_SW_ANTENNA_DIVERSITY	 
-		//#define CONFIG_HW_ANTENNA_DIVERSITY	
-	#endif
-
-	#define CONFIG_IOL
-#else 	//#ifndef CONFIG_MP_INCLUDED
-	#define CONFIG_MP_IWPRIV_SUPPORT	1
-#endif 	//#ifndef CONFIG_MP_INCLUDED
-
-#define CONFIG_AP_MODE	1
-#ifdef CONFIG_AP_MODE
-	#define CONFIG_NATIVEAP_MLME	1
-	#ifndef CONFIG_NATIVEAP_MLME
-		#define CONFIG_HOSTAPD_MLME	1
-	#endif			
-	#define CONFIG_FIND_BEST_CHANNEL	1
-	//#define CONFIG_NO_WIRELESS_HANDLERS	1
-#endif
-
-//	Added by Albert 20110314
-#define CONFIG_P2P	1
-#ifdef CONFIG_P2P
-	//Added by Albert 20110812
-	//The CONFIG_WFD is for supporting the Wi-Fi display
-	#define CONFIG_WFD	1
-	
-	#ifndef CONFIG_WIFI_TEST
-		#define CONFIG_P2P_REMOVE_GROUP_INFO
-	#endif
-	//#define CONFIG_DBG_P2P
-
-	//#define CONFIG_P2P_PS
-	#define CONFIG_P2P_IPS
-#endif
-
-//	Added by Kurt 20110511
-//#define CONFIG_TDLS	1
-#ifdef CONFIG_TDLS
-//	#ifndef CONFIG_WFD
-//		#define CONFIG_WFD	1
-//	#endif
-//	#define CONFIG_TDLS_AUTOSETUP			1
-//	#define CONFIG_TDLS_AUTOCHECKALIVE		1
-#endif
-
-#define CONFIG_SKB_COPY	1//for amsdu
-
-#define CONFIG_LED
-#ifdef CONFIG_LED
-	#define CONFIG_SW_LED
-	#ifdef CONFIG_SW_LED
-		//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
-	#endif
-#endif // CONFIG_LED
-
-
-
-#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
-#define CONFIG_GLOBAL_UI_PID
-
-#define CONFIG_LAYER2_ROAMING
-#define CONFIG_LAYER2_ROAMING_RESUME
-//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...
-//#define CONFIG_RESUME_IN_WORKQUEUE
-//#define CONFIG_SET_SCAN_DENY_TIMER
-#define CONFIG_LONG_DELAY_ISSUE
-#define CONFIG_NEW_SIGNAL_STAT_PROCESS
-//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
-#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable */
-
-#ifdef CONFIG_IOL
-	#define CONFIG_IOL_LLT
-	#define CONFIG_IOL_MAC
-	#define CONFIG_IOL_BB_PHY_REG
-	#define CONFIG_IOL_BB_AGC_TAB
-	#define CONFIG_IOL_RF_RF90_PATH_A
-	#define CONFIG_IOL_RF_RF90_PATH_B
-#endif
-
-#define CONFIG_BR_EXT	1	// Enable NAT2.5 support for STA mode interface with a L2 Bridge
-#ifdef CONFIG_BR_EXT
-#define CONFIG_BR_EXT_BRNAME	"br0"
-#endif	// CONFIG_BR_EXT
-
-#define CONFIG_TX_MCAST2UNI	1	// Support IP multicast->unicast
-//#define CONFIG_CHECK_AC_LIFETIME 1	// Check packet lifetime of 4 ACs.
-
-#define CONFIG_CONCURRENT_MODE 1
-#ifdef CONFIG_CONCURRENT_MODE
-	#define CONFIG_TSF_RESET_OFFLOAD 1			// For 2 PORT TSF SYNC.
-	//#define CONFIG_HWPORT_SWAP				//Port0->Sec , Port1 -> Pri
-#endif	// CONFIG_CONCURRENT_MODE
-
-#define CONFIG_80211D
-
-/*
- * Interface  Related Config
- */
-//#define CONFIG_USB_INTERRUPT_IN_PIPE	1
-
-#ifndef CONFIG_MINIMAL_MEMORY_USAGE
-	#define CONFIG_USB_TX_AGGREGATION	1
-	#define CONFIG_USB_RX_AGGREGATION	1
-#endif
-
-#define CONFIG_PREALLOC_RECV_SKB	1
-//#define CONFIG_REDUCE_USB_TX_INT	1	// Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
-//#define CONFIG_EASY_REPLACEMENT	1
-
-/* 
- * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
- */
-//#define CONFIG_USE_USB_BUFFER_ALLOC_TX 1	// Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
-//#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1	// For RX path
-#ifdef CONFIG_PLATFORM_ARM_SUNxI
-	#ifndef 	CONFIG_USE_USB_BUFFER_ALLOC_TX 
-		#define CONFIG_USE_USB_BUFFER_ALLOC_TX
-	#endif
-#endif
-/* 
- * USB VENDOR REQ BUFFER ALLOCATION METHOD
- * if not set we'll use function local variable (stack memory)
- */
-//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
-#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
-
-#define CONFIG_USB_VENDOR_REQ_MUTEX
-#define CONFIG_VENDOR_REQ_RETRY
-
-//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1
-
-
-/*
- * HAL  Related Config
- */
-
-#define RTL8192C_RX_PACKET_NO_INCLUDE_CRC	1
-
-#define SUPPORTED_BLOCK_IO
-
-
-
-#define RTL8192CU_FW_DOWNLOAD_ENABLE	1
-
-#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW	0
-
-#define CONFIG_OUT_EP_WIFI_MODE	0
-
-#define ENABLE_USB_DROP_INCORRECT_OUT	0
-
-#define RTL8192CU_ASIC_VERIFICATION	0	// For ASIC verification.
-
-#define RTL8192CU_ADHOC_WORKAROUND_SETTING	1
-
-#define DISABLE_BB_RF	0
-
-#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0
-
-#ifdef CONFIG_MP_INCLUDED
-	#define MP_DRIVER 1
-	#undef CONFIG_USB_TX_AGGREGATION
-	#undef CONFIG_USB_RX_AGGREGATION
-#else
-	#define MP_DRIVER 0
-#endif
-
-
-/*
- * Platform  Related Config
- */
-#ifdef CONFIG_PLATFORM_MN10300
-#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
-
-#if	defined (CONFIG_SW_ANTENNA_DIVERSITY)
-	#undef CONFIG_SW_ANTENNA_DIVERSITY
-	#define CONFIG_HW_ANTENNA_DIVERSITY
-#endif
-
-#endif
-
-#ifdef CONFIG_WISTRON_PLATFORM
-
-#endif
-
-#ifdef CONFIG_PLATFORM_TI_DM365
-#define CONFIG_USE_USB_BUFFER_ALLOC_RX 1
-#endif
-
-
-/*
- * Debug  Related Config
- */
-//#define CONFIG_DEBUG_RTL871X
-
-#define DBG	0
-//#define CONFIG_DEBUG_RTL819X
-
-#define CONFIG_PROC_DEBUG	1
-
-//#define DBG_IO
-//#define DBG_DELAY_OS
-//#define DBG_MEM_ALLOC
-//#define DBG_IOCTL
-
-//#define DBG_TX
-//#define DBG_XMIT_BUF
-//#define DBG_TX_DROP_FRAME
-
-//#define DBG_RX_DROP_FRAME
-//#define DBG_RX_SEQ
-//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
-//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
-
-//#define DBG_EXPIRATION_CHK
-
-
-//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
-//#define DBG_ROAMING_TEST
-
-//#define DBG_HAL_INIT_PROFILING
-
-//#define DBG_MEMORY_LEAK	1
-
-#define DBG_CONFIG_ERROR_DETECT
-//#define DBG_CONFIG_ERROR_RESET
-
-//TX use 1 urb
-//#define CONFIG_SINGLE_XMIT_BUF
-//RX use 1 urb
-//#define CONFIG_SINGLE_RECV_BUF
-
-//turn off power tracking when traffic is busy
-//#define CONFIG_BUSY_TRAFFIC_SKIP_PWR_TRACK