Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 124 deletions

diff --git a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_gpio.c b/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_gpio.c
deleted file mode 100755
index 8dcc8ca6..00000000
--- a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_gpio.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-* Customer code to add GPIO control during WLAN start/stop
-* Copyright (C) 1999-2011, Broadcom Corporation
-* 
-*         Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2 (the "GPL"),
-* available at http://www.broadcom.com/licenses/GPLv2.php, with the
-* following added to such license:
-* 
-*      As a special exception, the copyright holders of this software give you
-* permission to link this software with independent modules, and to copy and
-* distribute the resulting executable under terms of your choice, provided that
-* you also meet, for each linked independent module, the terms and conditions of
-* the license of that module.  An independent module is a module which is not
-* derived from this software.  The special exception does not apply to any
-* modifications of the software.
-* 
-*      Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a license
-* other than the GPL, without Broadcom's express prior written consent.
-*
-* $Id: dhd_custom_gpio.c,v 1.2.42.1 2010-10-19 00:41:09 Exp $
-*/
-
-#include <osl.h>
-
-#ifdef CUSTOMER_HW
-
-#ifdef CONFIG_MACH_ODROID_4210
-/*
-#include <mach/gpio.h>
-#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/sdhci.h>
-#include <plat/devs.h>	// modifed plat-samsung/dev-hsmmcX.c EXPORT_SYMBOL(s3c_device_hsmmcx) added
-
-#define	sdmmc_channel	s3c_device_hsmmc0
-*/
-#endif
-
-#include <mach/wmt_misc.h> //wifi_power_ctrl_comm(int open,int mdelay)
-#include <mach/wmt_iomux.h>
-#include <linux/gpio.h>
-extern void wifi_power_ctrl_comm(int open,int mdelay);
-extern void force_remove_sdio2(void);
-extern void wmt_detect_sdio2(void);
-#define OOB_IRQ WMT_PIN_GP1_GPIO15
-
-
-#ifdef CUSTOMER_OOB
-int bcm_wlan_get_oob_irq(void)
-{
-	int host_oob_irq = OOB_IRQ;
-	
-	int ret = 0;
-	ret = gpio_request(OOB_IRQ, "ap6493_oob_irq");
-	if(ret < 0)
-	{
-		printk("request gpio for ap6493 oob irq failed!\n");
-		return 0;
-	}
-	gpio_direction_input(OOB_IRQ);
-	
-	wmt_gpio_setpull(WMT_PIN_GP62_WAKEUP0, WMT_GPIO_PULL_DOWN);
-
-/*
-#ifdef CONFIG_MACH_ODROID_4210
-	printk("GPIO(WL_HOST_WAKE) = EXYNOS4_GPX0(7) = %d\n", EXYNOS4_GPX0(7));
-	host_oob_irq = gpio_to_irq(EXYNOS4_GPX0(7));
-	gpio_direction_input(EXYNOS4_GPX0(7));
-	printk("host_oob_irq: %d \r\n", host_oob_irq);
-#endif
-*/
-
-	return host_oob_irq;
-}
-#endif
-
-void bcm_wlan_power_on(int flag)
-{
-	if (flag == 1) {
-		printk("======== PULL WL_REG_ON HIGH! ========\n");
-#ifdef CONFIG_MACH_ODROID_4210
-		//gpio_set_value(EXYNOS4_GPK1(0), 1);
-		wifi_power_ctrl_comm(1,0x00);
-		/* Lets customer power to get stable */
-		mdelay(100);
-		printk("======== Card detection to detect SDIO card! ========\n");
-		//sdhci_s3c_force_presence_change(&sdmmc_channel, 1);
-		wmt_detect_sdio2();
-#endif
-	} else {
-		printk("======== PULL WL_REG_ON HIGH! (flag = %d) ========\n", flag);
-#ifdef CONFIG_MACH_ODROID_4210
-		//gpio_set_value(EXYNOS4_GPK1(0), 1);
-		wifi_power_ctrl_comm(1,0x00);
-#endif
-	}
-}
-
-void bcm_wlan_power_off(int flag)
-{
-	if (flag == 1) {
-		printk("======== Card detection to remove SDIO card! ========\n");
-#ifdef CONFIG_MACH_ODROID_4210
-		//sdhci_s3c_force_presence_change(&sdmmc_channel, 0);
-		force_remove_sdio2();
-		mdelay(100);
-		printk("======== PULL WL_REG_ON LOW! ========\n");
-		//gpio_set_value(EXYNOS4_GPK1(0), 0);
-		wifi_power_ctrl_comm(0,0x00);
-#endif
-	} else {
-		printk("======== PULL WL_REG_ON LOW! (flag = %d) ========\n", flag);
-#ifdef CONFIG_MACH_ODROID_4210
-		//gpio_set_value(EXYNOS4_GPK1(0), 0);
-		wifi_power_ctrl_comm(0,0x00);
-#endif
-	}
-}
-
-#endif /* CUSTOMER_HW */