Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 289 deletions

diff --git a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_custom_gpio.c b/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_custom_gpio.c
deleted file mode 100755
index 6cd7df66..00000000
--- a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.88.45.x.cn/dhd_custom_gpio.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
-* Customer code to add GPIO control during WLAN start/stop
-* $Copyright Open Broadcom Corporation$
-*
-* $Id: dhd_custom_gpio.c 417465 2013-08-09 11:47:27Z $
-*/
-
-#include <typedefs.h>
-#include <linuxver.h>
-#include <osl.h>
-#include <bcmutils.h>
-
-#include <dngl_stats.h>
-#include <dhd.h>
-
-#include <wlioctl.h>
-#include <wl_iw.h>
-
-#define WL_ERROR(x) printf x
-#define WL_TRACE(x)
-
-#ifdef CUSTOMER_HW
-#if defined(CUSTOMER_OOB)
-extern int bcm_wlan_get_oob_irq(void);
-#endif
-extern  void bcm_wlan_power_off(int);
-extern  void bcm_wlan_power_on(int);
-#endif /* CUSTOMER_HW */
-#if defined(CUSTOMER_HW2)
-
-#if defined(PLATFORM_MPS)
-int __attribute__ ((weak)) wifi_get_fw_nv_path(char *fw, char *nv) { return 0;};
-#endif
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
-int wifi_set_power(int on, unsigned long msec);
-int wifi_get_irq_number(unsigned long *irq_flags_ptr);
-int wifi_get_mac_addr(unsigned char *buf);
-void *wifi_get_country_code(char *ccode);
-#else
-int wifi_set_power(int on, unsigned long msec) { return -1; }
-int wifi_get_irq_number(unsigned long *irq_flags_ptr) { return -1; }
-int wifi_get_mac_addr(unsigned char *buf) { return -1; }
-void *wifi_get_country_code(char *ccode) { return NULL; }
-#endif /* CONFIG_WIFI_CONTROL_FUNC */
-#endif 
-
-#if defined(OOB_INTR_ONLY)
-
-#if defined(BCMLXSDMMC)
-extern int sdioh_mmc_irq(int irq);
-#endif /* (BCMLXSDMMC)  */
-
-#if defined(CUSTOMER_HW3) || defined(PLATFORM_MPS)
-#include <mach/gpio.h>
-#endif
-
-/* Customer specific Host GPIO defintion  */
-static int dhd_oob_gpio_num = -1;
-
-module_param(dhd_oob_gpio_num, int, 0644);
-MODULE_PARM_DESC(dhd_oob_gpio_num, "DHD oob gpio number");
-
-/* This function will return:
- *  1) return :  Host gpio interrupt number per customer platform
- *  2) irq_flags_ptr : Type of Host interrupt as Level or Edge
- *
- *  NOTE :
- *  Customer should check his platform definitions
- *  and his Host Interrupt spec
- *  to figure out the proper setting for his platform.
- *  Broadcom provides just reference settings as example.
- *
- */
-int dhd_customer_oob_irq_map(unsigned long *irq_flags_ptr)
-{
-	int  host_oob_irq = 0;
-
-#if defined(CUSTOMER_HW2) && !defined(PLATFORM_MPS)
-	host_oob_irq = wifi_get_irq_number(irq_flags_ptr);
-
-#elif defined(CUSTOMER_OOB)
-	host_oob_irq = bcm_wlan_get_oob_irq();
-
-#else
-#if defined(CUSTOM_OOB_GPIO_NUM)
-	if (dhd_oob_gpio_num < 0) {
-		dhd_oob_gpio_num = CUSTOM_OOB_GPIO_NUM;
-	}
-#endif /* CUSTOMER_OOB_GPIO_NUM */
-
-	if (dhd_oob_gpio_num < 0) {
-		WL_ERROR(("%s: ERROR customer specific Host GPIO is NOT defined \n",
-		__FUNCTION__));
-		return (dhd_oob_gpio_num);
-	}
-
-	WL_ERROR(("%s: customer specific Host GPIO number is (%d)\n",
-	         __FUNCTION__, dhd_oob_gpio_num));
-
-#if defined CUSTOMER_HW
-	host_oob_irq = MSM_GPIO_TO_INT(dhd_oob_gpio_num);
-#elif defined CUSTOMER_HW3 || defined(PLATFORM_MPS)
-	gpio_request(dhd_oob_gpio_num, "oob irq");
-	host_oob_irq = gpio_to_irq(dhd_oob_gpio_num);
-	gpio_direction_input(dhd_oob_gpio_num);
-#endif /* CUSTOMER_HW */
-#endif 
-
-	return (host_oob_irq);
-}
-#endif 
-
-/* Customer function to control hw specific wlan gpios */
-void
-dhd_customer_gpio_wlan_ctrl(int onoff)
-{
-	switch (onoff) {
-		case WLAN_RESET_OFF:
-			WL_TRACE(("%s: call customer specific GPIO to insert WLAN RESET\n",
-				__FUNCTION__));
-#ifdef CUSTOMER_HW
-			bcm_wlan_power_off(2);
-#endif /* CUSTOMER_HW */
-#if defined(CUSTOMER_HW2)
-			wifi_set_power(0, WIFI_TURNOFF_DELAY);
-#endif
-			WL_ERROR(("=========== WLAN placed in RESET ========\n"));
-		break;
-
-		case WLAN_RESET_ON:
-			WL_TRACE(("%s: call customer specific GPIO to remove WLAN RESET\n",
-				__FUNCTION__));
-#ifdef CUSTOMER_HW
-			bcm_wlan_power_on(2);
-			OSL_DELAY(200);
-#endif /* CUSTOMER_HW */
-#if defined(CUSTOMER_HW2)
-			wifi_set_power(1, 200);
-#endif
-			WL_ERROR(("=========== WLAN going back to live  ========\n"));
-		break;
-
-		case WLAN_POWER_OFF:
-			WL_TRACE(("%s: call customer specific GPIO to turn off WL_REG_ON\n",
-				__FUNCTION__));
-#ifdef CUSTOMER_HW
-			bcm_wlan_power_off(1);
-#endif /* CUSTOMER_HW */
-			WL_ERROR(("=========== WLAN placed in POWER OFF ========\n"));
-		break;
-
-		case WLAN_POWER_ON:
-			WL_TRACE(("%s: call customer specific GPIO to turn on WL_REG_ON\n",
-				__FUNCTION__));
-#ifdef CUSTOMER_HW
-			bcm_wlan_power_on(1);
-#endif /* CUSTOMER_HW */
-			/* Lets customer power to get stable */
-			OSL_DELAY(200);
-			WL_ERROR(("=========== WLAN placed in POWER ON ========\n"));
-		break;
-	}
-}
-
-#ifdef GET_CUSTOM_MAC_ENABLE
-/* Function to get custom MAC address */
-int
-dhd_custom_get_mac_address(unsigned char *buf)
-{
-	int ret = 0;
-
-	WL_TRACE(("%s Enter\n", __FUNCTION__));
-	if (!buf)
-		return -EINVAL;
-
-	/* Customer access to MAC address stored outside of DHD driver */
-#if defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35))
-	ret = wifi_get_mac_addr(buf);
-#endif
-
-#ifdef EXAMPLE_GET_MAC
-	/* EXAMPLE code */
-	{
-		struct ether_addr ea_example = {{0x00, 0x11, 0x22, 0x33, 0x44, 0xFF}};
-		bcopy((char *)&ea_example, buf, sizeof(struct ether_addr));
-	}
-#endif /* EXAMPLE_GET_MAC */
-
-	return ret;
-}
-#endif /* GET_CUSTOM_MAC_ENABLE */
-
-/* Customized Locale table : OPTIONAL feature */
-const struct cntry_locales_custom translate_custom_table[] = {
-/* Table should be filled out based on custom platform regulatory requirement */
-#ifdef EXAMPLE_TABLE
-	{"",   "XY", 4},  /* Universal if Country code is unknown or empty */
-	{"US", "US", 69}, /* input ISO "US" to : US regrev 69 */
-	{"CA", "US", 69}, /* input ISO "CA" to : US regrev 69 */
-	{"EU", "EU", 5},  /* European union countries to : EU regrev 05 */
-	{"AT", "EU", 5},
-	{"BE", "EU", 5},
-	{"BG", "EU", 5},
-	{"CY", "EU", 5},
-	{"CZ", "EU", 5},
-	{"DK", "EU", 5},
-	{"EE", "EU", 5},
-	{"FI", "EU", 5},
-	{"FR", "EU", 5},
-	{"DE", "EU", 5},
-	{"GR", "EU", 5},
-	{"HU", "EU", 5},
-	{"IE", "EU", 5},
-	{"IT", "EU", 5},
-	{"LV", "EU", 5},
-	{"LI", "EU", 5},
-	{"LT", "EU", 5},
-	{"LU", "EU", 5},
-	{"MT", "EU", 5},
-	{"NL", "EU", 5},
-	{"PL", "EU", 5},
-	{"PT", "EU", 5},
-	{"RO", "EU", 5},
-	{"SK", "EU", 5},
-	{"SI", "EU", 5},
-	{"ES", "EU", 5},
-	{"SE", "EU", 5},
-	{"GB", "EU", 5},
-	{"KR", "XY", 3},
-	{"AU", "XY", 3},
-	{"CN", "XY", 3}, /* input ISO "CN" to : XY regrev 03 */
-	{"TW", "XY", 3},
-	{"AR", "XY", 3},
-	{"MX", "XY", 3},
-	{"IL", "IL", 0},
-	{"CH", "CH", 0},
-	{"TR", "TR", 0},
-	{"NO", "NO", 0},
-#endif /* EXMAPLE_TABLE */
-};
-
-
-/* Customized Locale convertor
-*  input : ISO 3166-1 country abbreviation
-*  output: customized cspec
-*/
-void get_customized_country_code(char *country_iso_code, wl_country_t *cspec)
-{
-#if defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
-
-	struct cntry_locales_custom *cloc_ptr;
-
-	if (!cspec)
-		return;
-
-	cloc_ptr = wifi_get_country_code(country_iso_code);
-	if (cloc_ptr) {
-		strlcpy(cspec->ccode, cloc_ptr->custom_locale, WLC_CNTRY_BUF_SZ);
-		cspec->rev = cloc_ptr->custom_locale_rev;
-	}
-	return;
-#else
-	int size, i;
-
-	size = ARRAYSIZE(translate_custom_table);
-
-	if (cspec == 0)
-		 return;
-
-	if (size == 0)
-		 return;
-
-	for (i = 0; i < size; i++) {
-		if (strcmp(country_iso_code, translate_custom_table[i].iso_abbrev) == 0) {
-			memcpy(cspec->ccode,
-				translate_custom_table[i].custom_locale, WLC_CNTRY_BUF_SZ);
-			cspec->rev = translate_custom_table[i].custom_locale_rev;
-			return;
-		}
-	}
-#ifdef EXAMPLE_TABLE
-	/* if no country code matched return first universal code from translate_custom_table */
-	memcpy(cspec->ccode, translate_custom_table[0].custom_locale, WLC_CNTRY_BUF_SZ);
-	cspec->rev = translate_custom_table[0].custom_locale_rev;
-#endif /* EXMAPLE_TABLE */
-	return;
-#endif /* defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)) */
-}