Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 142 deletions

diff --git a/ANDROID_3.4.5/drivers/net/phy/Kconfig b/ANDROID_3.4.5/drivers/net/phy/Kconfig
deleted file mode 100644
index 0e01f4e5..00000000
--- a/ANDROID_3.4.5/drivers/net/phy/Kconfig
+++ /dev/null
@@ -1,142 +0,0 @@
-#
-# PHY Layer Configuration
-#
-
-menuconfig PHYLIB
-	tristate "PHY Device support and infrastructure"
-	depends on !S390
-	depends on NETDEVICES
-	help
-	  Ethernet controllers are usually attached to PHY
-	  devices.  This option provides infrastructure for
-	  managing PHY devices.
-
-if PHYLIB
-
-comment "MII PHY device drivers"
-
-config AMD_PHY
-	tristate "Drivers for the AMD PHYs"
-	---help---
-	  Currently supports the am79c874
-
-config MARVELL_PHY
-	tristate "Drivers for Marvell PHYs"
-	---help---
-	  Currently has a driver for the 88E1011S
-	
-config DAVICOM_PHY
-	tristate "Drivers for Davicom PHYs"
-	---help---
-	  Currently supports dm9161e and dm9131
-
-config QSEMI_PHY
-	tristate "Drivers for Quality Semiconductor PHYs"
-	---help---
-	  Currently supports the qs6612
-
-config LXT_PHY
-	tristate "Drivers for the Intel LXT PHYs"
-	---help---
-	  Currently supports the lxt970, lxt971
-
-config CICADA_PHY
-	tristate "Drivers for the Cicada PHYs"
-	---help---
-	  Currently supports the cis8204
-
-config VITESSE_PHY
-        tristate "Drivers for the Vitesse PHYs"
-        ---help---
-          Currently supports the vsc8244
-
-config SMSC_PHY
-	tristate "Drivers for SMSC PHYs"
-	---help---
-	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
-
-config BROADCOM_PHY
-	tristate "Drivers for Broadcom PHYs"
-	---help---
-	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
-	  and BCM5482 PHYs.
-
-config BCM63XX_PHY
-	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
-	depends on BCM63XX
-	---help---
-	  Currently supports the 6348 and 6358 PHYs.
-
-config ICPLUS_PHY
-	tristate "Drivers for ICPlus PHYs"
-	---help---
-	  Currently supports the IP175C and IP1001 PHYs.
-
-config REALTEK_PHY
-	tristate "Drivers for Realtek PHYs"
-	---help---
-	  Supports the Realtek 821x PHY.
-
-config NATIONAL_PHY
-	tristate "Drivers for National Semiconductor PHYs"
-	---help---
-	  Currently supports the DP83865 PHY.
-
-config STE10XP
-	tristate "Driver for STMicroelectronics STe10Xp PHYs"
-	---help---
-	  This is the driver for the STe100p and STe101p PHYs.
-
-config LSI_ET1011C_PHY
-	tristate "Driver for LSI ET1011C PHY"
-	---help---
-	  Supports the LSI ET1011C PHY.
-
-config MICREL_PHY
-	tristate "Driver for Micrel PHYs"
-	---help---
-	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
-
-config FIXED_PHY
-	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
-	depends on PHYLIB=y
-	---help---
-	  Adds the platform "fixed" MDIO Bus to cover the boards that use
-	  PHYs that are not connected to the real MDIO bus.
-
-	  Currently tested with mpc866ads and mpc8349e-mitx.
-
-config MDIO_BITBANG
-	tristate "Support for bitbanged MDIO buses"
-	help
-	  This module implements the MDIO bus protocol in software,
-	  for use by low level drivers that export the ability to
-	  drive the relevant pins.
-
-	  If in doubt, say N.
-
-config MDIO_GPIO
-	tristate "Support for GPIO lib-based bitbanged MDIO buses"
-	depends on MDIO_BITBANG && GENERIC_GPIO
-	---help---
-	  Supports GPIO lib-based MDIO busses.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called mdio-gpio.
-
-config MDIO_OCTEON
-	tristate "Support for MDIO buses on Octeon SOCs"
-	depends on  CPU_CAVIUM_OCTEON
-	default y
-	help
-
-	  This module provides a driver for the Octeon MDIO busses.
-	  It is required by the Octeon Ethernet device drivers.
-
-	  If in doubt, say Y.
-
-endif # PHYLIB
-
-config MICREL_KS8995MA
-	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
-	depends on SPI