Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 156 deletions

diff --git a/ANDROID_3.4.5/drivers/net/irda/old_belkin-sir.c b/ANDROID_3.4.5/drivers/net/irda/old_belkin-sir.c
deleted file mode 100644
index 75714bc7..00000000
--- a/ANDROID_3.4.5/drivers/net/irda/old_belkin-sir.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      old_belkin.c
- * Version:       1.1
- * Description:   Driver for the Belkin (old) SmartBeam dongle
- * Status:        Experimental...
- * Author:        Jean Tourrilhes <jt@hpl.hp.com>
- * Created at:    22/11/99
- * Modified at:   Fri Dec 17 09:13:32 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
- *     
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- * 
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *     GNU General Public License for more details.
- * 
- *     You should have received a copy of the GNU General Public License 
- *     along with this program; if not, write to the Free Software 
- *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
- *     MA 02111-1307 USA
- *     
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-// #include <net/irda/irda_device.h>
-
-#include "sir-dev.h"
-
-/*
- * Belkin is selling a dongle called the SmartBeam.
- * In fact, there is two hardware version of this dongle, of course with
- * the same name and looking the exactly same (grrr...).
- * I guess that I've got the old one, because inside I don't have
- * a jumper for IrDA/ASK...
- *
- * As far as I can make it from info on their web site, the old dongle 
- * support only 9600 b/s, which make our life much simpler as far as
- * the driver is concerned, but you might not like it very much ;-)
- * The new SmartBeam does 115 kb/s, and I've not tested it...
- *
- * Belkin claim that the correct driver for the old dongle (in Windows)
- * is the generic Parallax 9500a driver, but the Linux LiteLink driver
- * fails for me (probably because Linux-IrDA doesn't rate fallback),
- * so I created this really dumb driver...
- *
- * In fact, this driver doesn't do much. The only thing it does is to
- * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
- * driver is called "old_belkin" so that when the new SmartBeam is supported
- * its driver can be called "belkin" instead of "new_belkin".
- *
- * Note : this driver was written without any info/help from Belkin,
- * so a lot of info here might be totally wrong. Blame me ;-)
- */
-
-static int old_belkin_open(struct sir_dev *dev);
-static int old_belkin_close(struct sir_dev *dev);
-static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed);
-static int old_belkin_reset(struct sir_dev *dev);
-
-static struct dongle_driver old_belkin = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "Old Belkin SmartBeam",
-	.type		= IRDA_OLD_BELKIN_DONGLE,
-	.open		= old_belkin_open,
-	.close		= old_belkin_close,
-	.reset		= old_belkin_reset,
-	.set_speed	= old_belkin_change_speed,
-};
-
-static int __init old_belkin_sir_init(void)
-{
-	return irda_register_dongle(&old_belkin);
-}
-
-static void __exit old_belkin_sir_cleanup(void)
-{
-	irda_unregister_dongle(&old_belkin);
-}
-
-static int old_belkin_open(struct sir_dev *dev)
-{
-	struct qos_info *qos = &dev->qos;
-
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
-	/* Power on dongle */
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-
-	/* Not too fast, please... */
-	qos->baud_rate.bits &= IR_9600;
-	/* Needs at least 10 ms (totally wild guess, can do probably better) */
-	qos->min_turn_time.bits = 0x01;
-	irda_qos_bits_to_value(qos);
-
-	/* irda thread waits 50 msec for power settling */
-
-	return 0;
-}
-
-static int old_belkin_close(struct sir_dev *dev)
-{
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
-	/* Power off dongle */
-	sirdev_set_dtr_rts(dev, FALSE, FALSE);
-
-	return 0;
-}
-
-/*
- * Function old_belkin_change_speed (task)
- *
- *    With only one speed available, not much to do...
- */
-static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
-{
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
-	dev->speed = 9600;
-	return (speed==dev->speed) ? 0 : -EINVAL;
-}
-
-/*
- * Function old_belkin_reset (task)
- *
- *      Reset the Old-Belkin type dongle.
- *
- */
-static int old_belkin_reset(struct sir_dev *dev)
-{
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
-	/* This dongles speed "defaults" to 9600 bps ;-) */
-	dev->speed = 9600;
-
-	return 0;
-}
-
-MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
-
-module_init(old_belkin_sir_init);
-module_exit(old_belkin_sir_cleanup);