Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 77 deletions

diff --git a/ANDROID_3.4.5/drivers/net/fddi/Kconfig b/ANDROID_3.4.5/drivers/net/fddi/Kconfig
deleted file mode 100644
index 3a424c86..00000000
--- a/ANDROID_3.4.5/drivers/net/fddi/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# FDDI network device configuration
-#
-
-config FDDI
-	tristate "FDDI driver support"
-	depends on PCI || EISA || TC
-	---help---
-	  Fiber Distributed Data Interface is a high speed local area network
-	  design; essentially a replacement for high speed Ethernet. FDDI can
-	  run over copper or fiber. If you are connected to such a network and
-	  want a driver for the FDDI card in your computer, say Y here (and
-	  then also Y to the driver for your FDDI card, below). Most people
-	  will say N.
-
-if FDDI
-
-config DEFXX
-	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
-	depends on FDDI && (PCI || EISA || TC)
-	---help---
-	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
-	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
-	  to a local FDDI network.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called defxx.  If unsure, say N.
-
-config DEFXX_MMIO
-	bool
-	prompt "Use MMIO instead of PIO" if PCI || EISA
-	depends on DEFXX
-	default n if PCI || EISA
-	default y
-	---help---
-	  This instructs the driver to use EISA or PCI memory-mapped I/O
-	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
-	  Enabling this gives an improvement in processing time in parts
-	  of the driver, but it may cause problems with EISA (DEFEA)
-	  adapters.  TURBOchannel does not have the concept of I/O ports,
-	  so MMIO is always used for these (DEFTA) adapters.
-
-	  If unsure, say N.
-
-config SKFP
-	tristate "SysKonnect FDDI PCI support"
-	depends on FDDI && PCI
-	select BITREVERSE
-	---help---
-	  Say Y here if you have a SysKonnect FDDI PCI adapter.
-	  The following adapters are supported by this driver:
-	  - SK-5521 (SK-NET FDDI-UP)
-	  - SK-5522 (SK-NET FDDI-UP DAS)
-	  - SK-5541 (SK-NET FDDI-FP)
-	  - SK-5543 (SK-NET FDDI-LP)
-	  - SK-5544 (SK-NET FDDI-LP DAS)
-	  - SK-5821 (SK-NET FDDI-UP64)
-	  - SK-5822 (SK-NET FDDI-UP64 DAS)
-	  - SK-5841 (SK-NET FDDI-FP64)
-	  - SK-5843 (SK-NET FDDI-LP64)
-	  - SK-5844 (SK-NET FDDI-LP64 DAS)
-	  - Netelligent 100 FDDI DAS Fibre SC
-	  - Netelligent 100 FDDI SAS Fibre SC
-	  - Netelligent 100 FDDI DAS UTP
-	  - Netelligent 100 FDDI SAS UTP
-	  - Netelligent 100 FDDI SAS Fibre MIC
-
-	  Read <file:Documentation/networking/skfp.txt> for information about
-	  the driver.
-
-	  Questions concerning this driver can be addressed to:
-	  <linux@syskonnect.de>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skfp.  This is recommended.
-
-endif # FDDI