Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 111 deletions

diff --git a/ANDROID_3.4.5/drivers/net/ethernet/marvell/Kconfig b/ANDROID_3.4.5/drivers/net/ethernet/marvell/Kconfig
deleted file mode 100644
index 00299347..00000000
--- a/ANDROID_3.4.5/drivers/net/ethernet/marvell/Kconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# Marvell device configuration
-#
-
-config NET_VENDOR_MARVELL
-	bool "Marvell devices"
-	default y
-	depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET
-	---help---
-	  If you have a network (Ethernet) card belonging to this class, say Y
-	  and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about Marvell devices. If you say Y, you will be
-	  asked for your specific card in the following questions.
-
-if NET_VENDOR_MARVELL
-
-config MV643XX_ETH
-	tristate "Marvell Discovery (643XX) and Orion ethernet support"
-	depends on (MV64X60 || PPC32 || PLAT_ORION) && INET
-	select INET_LRO
-	select PHYLIB
-	---help---
-	  This driver supports the gigabit ethernet MACs in the
-	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
-	  in the Marvell Orion ARM SoC family.
-
-	  Some boards that use the Discovery chipset are the Momenco
-	  Ocelot C and Jaguar ATX and Pegasos II.
-
-config PXA168_ETH
-	tristate "Marvell pxa168 ethernet support"
-	depends on CPU_PXA168
-	select PHYLIB
-	---help---
-	  This driver supports the pxa168 Ethernet ports.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called pxa168_eth.
-
-config SKGE
-	tristate "Marvell Yukon Gigabit Ethernet support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  and related Gigabit Ethernet adapters. It is a new smaller driver
-	  with better performance and more complete ethtool support.
-
-	  It does not support the link failover and network management
-	  features that "portable" vendor supplied sk98lin driver does.
-
-	  This driver supports adapters based on the original Yukon chipset:
-	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
-	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
-
-	  It does not support the newer Yukon2 chipset: a separate driver,
-	  sky2, is provided for these adapters.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called skge.  This is recommended.
-
-config SKGE_DEBUG
-	bool "Debugging interface"
-	depends on SKGE && DEBUG_FS
-	---help---
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-config SKGE_GENESIS
-	bool "Support for older SysKonnect Genesis boards"
-	depends on SKGE
-	---help---
-	 This enables support for the older and uncommon SysKonnect Genesis
-	 chips, which support MII via an external transceiver, instead of
-	 an internal one. Disabling this option will save some memory
-	 by making code smaller. If unsure say Y.
-
-config SKY2
-	tristate "Marvell Yukon 2 support"
-	depends on PCI
-	select CRC32
-	---help---
-	  This driver supports Gigabit Ethernet adapters based on the
-	  Marvell Yukon 2 chipset:
-	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
-	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
-
-	  There is companion driver for the older Marvell Yukon and
-	  SysKonnect Genesis based adapters: skge.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called sky2.  This is recommended.
-
-config SKY2_DEBUG
-	bool "Debugging interface"
-	depends on SKY2 && DEBUG_FS
-	---help---
-	  This option adds the ability to dump driver state for debugging.
-	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
-	  transmit and receive rings.
-
-	  If unsure, say N.
-
-endif # NET_VENDOR_MARVELL