Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 170 deletions

diff --git a/ANDROID_3.4.5/drivers/media/dvb/mantis/mantis_pci.c b/ANDROID_3.4.5/drivers/media/dvb/mantis/mantis_pci.c
deleted file mode 100644
index 371558af..00000000
--- a/ANDROID_3.4.5/drivers/media/dvb/mantis/mantis_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
-	Mantis PCI bridge driver
-
-	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/pci.h>
-
-#include <asm/irq.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-
-#include "dmxdev.h"
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-
-#include "mantis_common.h"
-#include "mantis_reg.h"
-#include "mantis_pci.h"
-
-#define DRIVER_NAME		"Mantis Core"
-
-int __devinit mantis_pci_init(struct mantis_pci *mantis)
-{
-	u8 latency;
-	struct mantis_hwconfig *config	= mantis->hwconfig;
-	struct pci_dev *pdev		= mantis->pdev;
-	int err, ret = 0;
-
-	dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
-		config->model_name,
-		config->dev_type,
-		mantis->pdev->bus->number,
-		PCI_SLOT(mantis->pdev->devfn),
-		PCI_FUNC(mantis->pdev->devfn));
-
-	err = pci_enable_device(pdev);
-	if (err != 0) {
-		ret = -ENODEV;
-		dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
-		goto fail0;
-	}
-
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err != 0) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
-		ret = -ENOMEM;
-		goto fail1;
-	}
-
-	pci_set_master(pdev);
-
-	if (!request_mem_region(pci_resource_start(pdev, 0),
-				pci_resource_len(pdev, 0),
-				DRIVER_NAME)) {
-
-		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
-		ret = -ENODEV;
-		goto fail1;
-	}
-
-	mantis->mmio = ioremap(pci_resource_start(pdev, 0),
-			       pci_resource_len(pdev, 0));
-
-	if (!mantis->mmio) {
-		dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
-		ret = -ENODEV;
-		goto fail2;
-	}
-
-	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
-	mantis->latency = latency;
-	mantis->revision = pdev->revision;
-
-	dprintk(MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
-		mantis->revision,
-		mantis->pdev->subsystem_vendor,
-		mantis->pdev->subsystem_device);
-
-	dprintk(MANTIS_ERROR, 0,
-		"irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
-		mantis->pdev->irq,
-		mantis->latency,
-		mantis->mantis_addr,
-		mantis->mmio);
-
-	err = request_irq(pdev->irq,
-			  config->irq_handler,
-			  IRQF_SHARED,
-			  DRIVER_NAME,
-			  mantis);
-
-	if (err != 0) {
-
-		dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
-		ret = -ENODEV;
-		goto fail3;
-	}
-
-	pci_set_drvdata(pdev, mantis);
-	return ret;
-
-	/* Error conditions */
-fail3:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
-	if (mantis->mmio)
-		iounmap(mantis->mmio);
-
-fail2:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
-	release_mem_region(pci_resource_start(pdev, 0),
-			   pci_resource_len(pdev, 0));
-
-fail1:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
-	pci_disable_device(pdev);
-
-fail0:
-	dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
-	pci_set_drvdata(pdev, NULL);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(mantis_pci_init);
-
-void mantis_pci_exit(struct mantis_pci *mantis)
-{
-	struct pci_dev *pdev = mantis->pdev;
-
-	dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
-	free_irq(pdev->irq, mantis);
-	if (mantis->mmio) {
-		iounmap(mantis->mmio);
-		release_mem_region(pci_resource_start(pdev, 0),
-				   pci_resource_len(pdev, 0));
-	}
-
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-}
-EXPORT_SYMBOL_GPL(mantis_pci_exit);
-
-MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
-MODULE_AUTHOR("Manu Abraham");
-MODULE_LICENSE("GPL");