Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 69 deletions

diff --git a/ANDROID_3.4.5/drivers/isdn/gigaset/Kconfig b/ANDROID_3.4.5/drivers/isdn/gigaset/Kconfig
deleted file mode 100644
index b18a92c3..00000000
--- a/ANDROID_3.4.5/drivers/isdn/gigaset/Kconfig
+++ /dev/null
@@ -1,69 +0,0 @@
-menuconfig ISDN_DRV_GIGASET
-	tristate "Siemens Gigaset support"
-	select CRC_CCITT
-	select BITREVERSE
-	help
-	  This driver supports the Siemens Gigaset SX205/255 family of
-	  ISDN DECT bases, including the predecessors Gigaset 3070/3075
-	  and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
-	  721X.
-	  If you have one of these devices, say M here and for at least
-	  one of the connection specific parts that follow.
-	  This will build a module called "gigaset".
-	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
-	  as a module, you have to build this driver as a module too,
-	  otherwise the Gigaset device won't show up as an ISDN device.
-
-if ISDN_DRV_GIGASET
-
-config GIGASET_CAPI
-	bool "Gigaset CAPI support"
-	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
-	default ISDN_I4L='n'
-	help
-	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
-	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
-	  subsystem you'll have to enable the capidrv glue driver.
-	  (select ISDN_CAPI_CAPIDRV.)
-	  Say N to build the old native ISDN4Linux variant.
-	  If unsure, say Y.
-
-config GIGASET_I4L
-	bool
-	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
-	default !GIGASET_CAPI
-
-config GIGASET_DUMMYLL
-	bool
-	default !GIGASET_CAPI&&!GIGASET_I4L
-
-config GIGASET_BASE
-	tristate "Gigaset base station support"
-	depends on USB
-	help
-	  Say M here if you want to use the USB interface of the Gigaset
-	  base for connection to your system.
-	  This will build a module called "bas_gigaset".
-
-config GIGASET_M105
-	tristate "Gigaset M105 support"
-	depends on USB
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
-	  This will build a module called "usb_gigaset".
-
-config GIGASET_M101
-	tristate "Gigaset M101 support"
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
-	  This will build a module called "ser_gigaset".
-
-config GIGASET_DEBUG
-	bool "Gigaset debugging"
-	help
-	  This enables debugging code in the Gigaset drivers.
-	  If in doubt, say yes.
-
-endif # ISDN_DRV_GIGASET