Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 3205 deletions

diff --git a/ANDROID_3.4.5/drivers/gpio/gpio-samsung.c b/ANDROID_3.4.5/drivers/gpio/gpio-samsung.c
deleted file mode 100644
index e991d917..00000000
--- a/ANDROID_3.4.5/drivers/gpio/gpio-samsung.c
+++ /dev/null
@@ -1,3205 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/of_address.h>
-
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
-#include <plat/pm.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup;
-
-	pup = __raw_readl(reg);
-	pup &= ~(3 << shift);
-	pup |= pull << shift;
-	__raw_writel(pup, reg);
-
-	return 0;
-}
-
-samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
-						unsigned int off)
-{
-	void __iomem *reg = chip->base + 0x08;
-	int shift = off * 2;
-	u32 pup = __raw_readl(reg);
-
-	pup >>= shift;
-	pup &= 0x3;
-
-	return (__force samsung_gpio_pull_t)pup;
-}
-
-int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-			 unsigned int off, samsung_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-					 unsigned int off)
-{
-	samsung_gpio_pull_t pull;
-
-	pull = samsung_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-
-static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
-				  unsigned int off, samsung_gpio_pull_t pull,
-				  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
-						  unsigned int off,
-						  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-					     unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-			     unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-					       unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-			       unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-
-static int exynos_gpio_setpull(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull)
-{
-	if (pull == S3C_GPIO_PULL_UP)
-		pull = 3;
-
-	return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-static samsung_gpio_pull_t exynos_gpio_getpull(struct samsung_gpio_chip *chip,
-						unsigned int off)
-{
-	samsung_gpio_pull_t pull;
-
-	pull = samsung_gpio_getpull_updown(chip, off);
-
-	if (pull == 3)
-		pull = S3C_GPIO_PULL_UP;
-
-	return pull;
-}
-
-/*
- * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
- */
-
-static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
-				    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off * 2;
-	u32 con;
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		if (cfg > 3)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x3 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-/*
- * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
- * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
- * S3C_GPIO_SPECIAL() macro.
- */
-
-static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
-					     unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off * 2;
-	con &= 3;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-/*
- * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- *	0000 = Input
- *	0001 = Output
- *	others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of functions for
- * each case.
- */
-
-static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
-				    unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-/*
- * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
- * register setting into a value the software can use, such as could be passed
- * to samsung_gpio_setcfg_4bit().
- *
- * @sa samsung_gpio_getcfg_2bit
- */
-
-static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
-					 unsigned int off)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = (off & 7) * 4;
-	u32 con;
-
-	if (off < 8 && chip->chip.ngpio > 8)
-		reg -= 4;
-
-	con = __raw_readl(reg);
-	con >>= shift;
-	con &= 0xf;
-
-	/* this conversion works for IN and OUT as well as special mode */
-	return S3C_GPIO_SPECIAL(con);
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-/*
- * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
- */
-
-static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-/*
- * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa samsung_gpio_getcfg_2bit
- * @sa samsung_gpio_getcfg_4bit
- */
-
-static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
-					  unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-#endif
-
-#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
-static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift;
-	u32 con;
-
-	switch (off) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		shift = (off & 7) * 4;
-		reg -= 4;
-		break;
-	case 6:
-		shift = ((off + 1) & 7) * 4;
-		reg -= 4;
-	default:
-		shift = ((off + 1) & 7) * 4;
-		break;
-	}
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-#endif
-
-static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chipcfg++) {
-		if (!chipcfg->set_config)
-			chipcfg->set_config = samsung_gpio_setcfg_4bit;
-		if (!chipcfg->get_config)
-			chipcfg->get_config = samsung_gpio_getcfg_4bit;
-		if (!chipcfg->set_pull)
-			chipcfg->set_pull = samsung_gpio_setpull_updown;
-		if (!chipcfg->get_pull)
-			chipcfg->get_pull = samsung_gpio_getpull_updown;
-	}
-}
-
-struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= samsung_gpio_setcfg_2bit,
-	.get_config	= samsung_gpio_getcfg_2bit,
-};
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c24xx_gpio_setcfg_abank,
-	.get_config	= s3c24xx_gpio_getcfg_abank,
-};
-#endif
-
-#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
-static struct samsung_gpio_cfg exynos_gpio_cfg = {
-	.set_pull	= exynos_gpio_setpull,
-	.get_pull	= exynos_gpio_getpull,
-	.set_config	= samsung_gpio_setcfg_4bit,
-	.get_config	= samsung_gpio_getcfg_4bit,
-};
-#endif
-
-#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
-static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
-	.cfg_eint	= 0x3,
-	.set_config	= s5p64x0_gpio_setcfg_rbank,
-	.get_config	= samsung_gpio_getcfg_4bit,
-	.set_pull	= samsung_gpio_setpull_updown,
-	.get_pull	= samsung_gpio_getpull_updown,
-};
-#endif
-
-static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
-	[0] = {
-		.cfg_eint	= 0x0,
-	},
-	[1] = {
-		.cfg_eint	= 0x3,
-	},
-	[2] = {
-		.cfg_eint	= 0x7,
-	},
-	[3] = {
-		.cfg_eint	= 0xF,
-	},
-	[4] = {
-		.cfg_eint	= 0x0,
-		.set_config	= samsung_gpio_setcfg_2bit,
-		.get_config	= samsung_gpio_getcfg_2bit,
-	},
-	[5] = {
-		.cfg_eint	= 0x2,
-		.set_config	= samsung_gpio_setcfg_2bit,
-		.get_config	= samsung_gpio_getcfg_2bit,
-	},
-	[6] = {
-		.cfg_eint	= 0x3,
-		.set_config	= samsung_gpio_setcfg_2bit,
-		.get_config	= samsung_gpio_getcfg_2bit,
-	},
-	[7] = {
-		.set_config	= samsung_gpio_setcfg_2bit,
-		.get_config	= samsung_gpio_getcfg_2bit,
-	},
-	[8] = {
-		.set_pull	= exynos_gpio_setpull,
-		.get_pull	= exynos_gpio_getpull,
-	},
-	[9] = {
-		.cfg_eint	= 0x3,
-		.set_pull	= exynos_gpio_setpull,
-		.get_pull	= exynos_gpio_getpull,
-	}
-};
-
-/*
- * Default routines for controlling GPIO, based on the original S3C24XX
- * GPIO functions which deal with the case where each gpio bank of the
- * chip is as following:
- *
- * base + 0x00: Control register, 2 bits per gpio
- *	        gpio n: 2 bits starting at (2*n)
- *		00 = input, 01 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
-*/
-
-static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long con;
-
-	samsung_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-
-	__raw_writel(con, base + 0x00);
-
-	samsung_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	samsung_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	con = __raw_readl(base + 0x00);
-	con &= ~(3 << (offset * 2));
-	con |= 1 << (offset * 2);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	samsung_gpio_unlock(ourchip, flags);
-	return 0;
-}
-
-/*
- * The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
- * state of the output.
- */
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
-				      unsigned int offset)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + GPIOCON_OFF);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned int offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, base + GPIOCON_OFF);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/*
- * The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
- * routines we store the 'base + 0x4' address so that these routines see
- * the data register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned con_offset = offset;
-
-	if (con_offset > 7)
-		con_offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-/* The next set of routines are for the case of s3c24xx bank a */
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-#endif
-
-/* The next set of routines are for the case of s5p64x0 bank r */
-
-static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long flags;
-
-	switch (offset) {
-	case 6:
-		offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		offset -= 7;
-		break;
-	}
-
-	samsung_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	samsung_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned long flags;
-	unsigned con_offset  = offset;
-
-	switch (con_offset) {
-	case 6:
-		con_offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		con_offset -= 7;
-		break;
-	}
-
-	samsung_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	samsung_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static void samsung_gpiolib_set(struct gpio_chip *chip,
-				unsigned offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-
-	samsung_gpio_lock(ourchip, flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-	__raw_writel(dat, base + 0x04);
-
-	samsung_gpio_unlock(ourchip, flags);
-}
-
-static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	unsigned long val;
-
-	val = __raw_readl(ourchip->base + 0x04);
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-/*
- * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
- * for use with the configuration calls, and other parts of the s3c gpiolib
- * support code.
- *
- * Not all s3c support code will need this, as some configurations of cpu
- * may only support one or two different configuration options and have an
- * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
- * the machine support file should provide its own samsung_gpiolib_getchip()
- * and any other necessary functions.
- */
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
-{
-	unsigned int gpn;
-	int i;
-
-	gpn = chip->chip.base;
-	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
-		s3c_gpios[gpn] = chip;
-	}
-}
-#endif /* CONFIG_S3C_GPIO_TRACK */
-
-/*
- * samsung_gpiolib_add() - add the Samsung gpio_chip.
- * @chip: The chip to register
- *
- * This is a wrapper to gpiochip_add() that takes our specific gpio chip
- * information and makes the necessary alterations for the platform and
- * notes the information for use with the configuration systems and any
- * other parts of the system.
- */
-
-static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
-{
-	struct gpio_chip *gc = &chip->chip;
-	int ret;
-
-	BUG_ON(!chip->base);
-	BUG_ON(!gc->label);
-	BUG_ON(!gc->ngpio);
-
-	spin_lock_init(&chip->lock);
-
-	if (!gc->direction_input)
-		gc->direction_input = samsung_gpiolib_2bit_input;
-	if (!gc->direction_output)
-		gc->direction_output = samsung_gpiolib_2bit_output;
-	if (!gc->set)
-		gc->set = samsung_gpiolib_set;
-	if (!gc->get)
-		gc->get = samsung_gpiolib_get;
-
-#ifdef CONFIG_PM
-	if (chip->pm != NULL) {
-		if (!chip->pm->save || !chip->pm->resume)
-			printk(KERN_ERR "gpio: %s has missing PM functions\n",
-			       gc->label);
-	} else
-		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
-#endif
-
-	/* gpiochip_add() prints own failure message on error. */
-	ret = gpiochip_add(gc);
-	if (ret >= 0)
-		s3c_gpiolib_track(chip);
-}
-
-static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
-					     int nr_chips, void __iomem *base)
-{
-	int i;
-	struct gpio_chip *gc = &chip->chip;
-
-	for (i = 0 ; i < nr_chips; i++, chip++) {
-		/* skip banks not present on SoC */
-		if (chip->chip.base >= S3C_GPIO_END)
-			continue;
-
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
-		if ((base != NULL) && (chip->base == NULL))
-			chip->base = base + ((i) * 0x10);
-
-		if (!gc->direction_input)
-			gc->direction_input = samsung_gpiolib_2bit_input;
-		if (!gc->direction_output)
-			gc->direction_output = samsung_gpiolib_2bit_output;
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
-static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
-						  int nr_chips, void __iomem *base,
-						  unsigned int offset)
-{
-	int i;
-
-	for (i = 0 ; i < nr_chips; i++, chip++) {
-		chip->chip.direction_input = samsung_gpiolib_2bit_input;
-		chip->chip.direction_output = samsung_gpiolib_2bit_output;
-
-		if (!chip->config)
-			chip->config = &samsung_gpio_cfgs[7];
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
-		if ((base != NULL) && (chip->base == NULL))
-			chip->base = base + ((i) * offset);
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
-/*
- * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
- * @chip: The gpio chip that is being configured.
- * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
- *
- * This helper deal with the GPIO cases where the control register has 4 bits
- * of control per GPIO, generally in the form of:
- * 0000 = Input
- * 0001 = Output
- * others = Special functions (dependent on bank)
- *
- * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a separate set of function
- * (samsung_gpiolib_add_4bit2_chips)for each case.
- */
-
-static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
-						  int nr_chips, void __iomem *base)
-{
-	int i;
-
-	for (i = 0 ; i < nr_chips; i++, chip++) {
-		chip->chip.direction_input = samsung_gpiolib_4bit_input;
-		chip->chip.direction_output = samsung_gpiolib_4bit_output;
-
-		if (!chip->config)
-			chip->config = &samsung_gpio_cfgs[2];
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
-		if ((base != NULL) && (chip->base == NULL))
-			chip->base = base + ((i) * 0x20);
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
-static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
-						   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
-		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-
-		if (!chip->config)
-			chip->config = &samsung_gpio_cfgs[2];
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
-static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
-					     int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
-		chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
-
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
-int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
-
-	return samsung_chip->irq_base + offset;
-}
-
-#ifdef CONFIG_PLAT_S3C24XX
-static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4)
-		return IRQ_EINT0 + offset;
-
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-
-	return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_PLAT_S3C64XX
-static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
-{
-	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
-}
-
-static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
-{
-	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
-}
-#endif
-
-struct samsung_gpio_chip s3c24xx_gpios[] = {
-#ifdef CONFIG_PLAT_S3C24XX
-	{
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 24,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPB(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOB",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPC(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOC",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPD(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOD",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPE(0),
-			.label	= "GPIOE",
-			.owner	= THIS_MODULE,
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPF(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOF",
-			.ngpio	= 8,
-			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
-		},
-	}, {
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base	= S3C2410_GPG(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOG",
-			.ngpio	= 16,
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPH(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOH",
-			.ngpio	= 11,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.chip	= {
-			.base	= S3C2410_GPJ(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOJ",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.chip	= {
-			.base	= S3C2410_GPK(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOK",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.chip	= {
-			.base	= S3C2410_GPL(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOL",
-			.ngpio	= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.chip	= {
-			.base	= S3C2410_GPM(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOM",
-			.ngpio	= 2,
-		},
-	},
-#endif
-};
-
-/*
- * GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	8	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	5	4Bit	Yes	3
- * E	5	4Bit	Yes	None
- * F	16	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	16	4Bit[2]	No	None
- * L	15	4Bit[2] No	None
- * M	6	4Bit	No	IRQ_EINT
- * N	16	2Bit	No	IRQ_EINT
- * O	16	2Bit	Yes	7
- * P	15	2Bit	Yes	8
- * Q	9	2Bit	Yes	9
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
-	{
-		.chip	= {
-			.base	= S3C64XX_GPA(0),
-			.ngpio	= S3C64XX_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.chip	= {
-			.base	= S3C64XX_GPB(0),
-			.ngpio	= S3C64XX_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S3C64XX_GPC(0),
-			.ngpio	= S3C64XX_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S3C64XX_GPD(0),
-			.ngpio	= S3C64XX_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[0],
-		.chip	= {
-			.base	= S3C64XX_GPE(0),
-			.ngpio	= S3C64XX_GPIO_E_NR,
-			.label	= "GPE",
-		},
-	}, {
-		.base	= S3C64XX_GPG_BASE,
-		.chip	= {
-			.base	= S3C64XX_GPG(0),
-			.ngpio	= S3C64XX_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S3C64XX_GPM_BASE,
-		.config	= &samsung_gpio_cfgs[1],
-		.chip	= {
-			.base	= S3C64XX_GPM(0),
-			.ngpio	= S3C64XX_GPIO_M_NR,
-			.label	= "GPM",
-			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
-	{
-		.base	= S3C64XX_GPH_BASE + 0x4,
-		.chip	= {
-			.base	= S3C64XX_GPH(0),
-			.ngpio	= S3C64XX_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	}, {
-		.base	= S3C64XX_GPK_BASE + 0x4,
-		.config	= &samsung_gpio_cfgs[0],
-		.chip	= {
-			.base	= S3C64XX_GPK(0),
-			.ngpio	= S3C64XX_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	}, {
-		.base	= S3C64XX_GPL_BASE + 0x4,
-		.config	= &samsung_gpio_cfgs[1],
-		.chip	= {
-			.base	= S3C64XX_GPL(0),
-			.ngpio	= S3C64XX_GPIO_L_NR,
-			.label	= "GPL",
-			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
-	{
-		.base	= S3C64XX_GPF_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S3C64XX_GPF(0),
-			.ngpio	= S3C64XX_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[7],
-		.chip	= {
-			.base	= S3C64XX_GPI(0),
-			.ngpio	= S3C64XX_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[7],
-		.chip	= {
-			.base	= S3C64XX_GPJ(0),
-			.ngpio	= S3C64XX_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S3C64XX_GPO(0),
-			.ngpio	= S3C64XX_GPIO_O_NR,
-			.label	= "GPO",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S3C64XX_GPP(0),
-			.ngpio	= S3C64XX_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S3C64XX_GPQ(0),
-			.ngpio	= S3C64XX_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	}, {
-		.base	= S3C64XX_GPN_BASE,
-		.irq_base = IRQ_EINT(0),
-		.config	= &samsung_gpio_cfgs[5],
-		.chip	= {
-			.base	= S3C64XX_GPN(0),
-			.ngpio	= S3C64XX_GPIO_N_NR,
-			.label	= "GPN",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-#endif
-};
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * F	2	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	8	2Bit	Yes	8
- * R	15	4Bit[2]	Yes	8
- */
-
-static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
-#ifdef CONFIG_CPU_S5P6440
-	{
-		.chip	= {
-			.base	= S5P6440_GPA(0),
-			.ngpio	= S5P6440_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.chip	= {
-			.base	= S5P6440_GPB(0),
-			.ngpio	= S5P6440_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5P6440_GPC(0),
-			.ngpio	= S5P6440_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P64X0_GPG_BASE,
-		.chip	= {
-			.base	= S5P6440_GPG(0),
-			.ngpio	= S5P6440_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
-#ifdef CONFIG_CPU_S5P6440
-	{
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.chip	= {
-			.base	= S5P6440_GPH(0),
-			.ngpio	= S5P6440_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
-#ifdef CONFIG_CPU_S5P6440
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfg_rbank,
-		.chip	= {
-			.base	= S5P6440_GPR(0),
-			.ngpio	= S5P6440_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
-#ifdef CONFIG_CPU_S5P6440
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S5P6440_GPF(0),
-			.ngpio	= S5P6440_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &samsung_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPI(0),
-			.ngpio	= S5P6440_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &samsung_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPJ(0),
-			.ngpio	= S5P6440_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &samsung_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPN(0),
-			.ngpio	= S5P6440_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S5P6440_GPP(0),
-			.ngpio	= S5P6440_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	},
-#endif
-};
-
-/*
- * S5P6450 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	8	4Bit	Yes	None
- * F	2	2Bit	Yes	None
- * G	14	4Bit[2]	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	5	4Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	11	2Bit	Yes	8
- * Q	14	2Bit	Yes	None
- * R	15	4Bit[2]	Yes	None
- * S	8	2Bit	Yes	None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
-#ifdef CONFIG_CPU_S5P6450
-	{
-		.chip	= {
-			.base	= S5P6450_GPA(0),
-			.ngpio	= S5P6450_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.chip	= {
-			.base	= S5P6450_GPB(0),
-			.ngpio	= S5P6450_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5P6450_GPC(0),
-			.ngpio	= S5P6450_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5P6450_GPD(0),
-			.ngpio	= S5P6450_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5P6450_GPK_BASE,
-		.chip	= {
-			.base	= S5P6450_GPK(0),
-			.ngpio	= S5P6450_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
-#ifdef CONFIG_CPU_S5P6450
-	{
-		.base	= S5P64X0_GPG_BASE + 0x4,
-		.chip	= {
-			.base	= S5P6450_GPG(0),
-			.ngpio	= S5P6450_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.chip	= {
-			.base	= S5P6450_GPH(0),
-			.ngpio	= S5P6450_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
-#ifdef CONFIG_CPU_S5P6450
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfg_rbank,
-		.chip	= {
-			.base	= S5P6450_GPR(0),
-			.ngpio	= S5P6450_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-#endif
-};
-
-static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
-#ifdef CONFIG_CPU_S5P6450
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S5P6450_GPF(0),
-			.ngpio	= S5P6450_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &samsung_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPI(0),
-			.ngpio	= S5P6450_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &samsung_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPJ(0),
-			.ngpio	= S5P6450_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &samsung_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPN(0),
-			.ngpio	= S5P6450_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S5P6450_GPP(0),
-			.ngpio	= S5P6450_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S5P6450_GPQ_BASE,
-		.config	= &samsung_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPQ(0),
-			.ngpio	= S5P6450_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	}, {
-		.base	= S5P6450_GPS_BASE,
-		.config	= &samsung_gpio_cfgs[6],
-		.chip	= {
-			.base	= S5P6450_GPS(0),
-			.ngpio	= S5P6450_GPIO_S_NR,
-			.label	= "GPS",
-		},
-	},
-#endif
-};
-
-/*
- * S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
-#ifdef CONFIG_CPU_S5PC100
-	{
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-#endif
-};
-
-/*
- * Followings are the gpio banks in S5PV210/S5PC110
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure samsung_gpio_cfgs[3] in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of samsung_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-
-static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
-#ifdef CONFIG_CPU_S5PV210
-	{
-		.chip	= {
-			.base	= S5PV210_GPA0(0),
-			.ngpio	= S5PV210_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPA1(0),
-			.ngpio	= S5PV210_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPB(0),
-			.ngpio	= S5PV210_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC0(0),
-			.ngpio	= S5PV210_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC1(0),
-			.ngpio	= S5PV210_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD0(0),
-			.ngpio	= S5PV210_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD1(0),
-			.ngpio	= S5PV210_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE0(0),
-			.ngpio	= S5PV210_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE1(0),
-			.ngpio	= S5PV210_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF0(0),
-			.ngpio	= S5PV210_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF1(0),
-			.ngpio	= S5PV210_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF2(0),
-			.ngpio	= S5PV210_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF3(0),
-			.ngpio	= S5PV210_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG0(0),
-			.ngpio	= S5PV210_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG1(0),
-			.ngpio	= S5PV210_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG2(0),
-			.ngpio	= S5PV210_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG3(0),
-			.ngpio	= S5PV210_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPI(0),
-			.ngpio	= S5PV210_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ0(0),
-			.ngpio	= S5PV210_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ1(0),
-			.ngpio	= S5PV210_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ2(0),
-			.ngpio	= S5PV210_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ3(0),
-			.ngpio	= S5PV210_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ4(0),
-			.ngpio	= S5PV210_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_MP01(0),
-			.ngpio	= S5PV210_GPIO_MP01_NR,
-			.label	= "MP01",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_MP02(0),
-			.ngpio	= S5PV210_GPIO_MP02_NR,
-			.label	= "MP02",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_MP03(0),
-			.ngpio	= S5PV210_GPIO_MP03_NR,
-			.label	= "MP03",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_MP04(0),
-			.ngpio	= S5PV210_GPIO_MP04_NR,
-			.label	= "MP04",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_MP05(0),
-			.ngpio	= S5PV210_GPIO_MP05_NR,
-			.label	= "MP05",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PV210_GPH0(0),
-			.ngpio	= S5PV210_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PV210_GPH1(0),
-			.ngpio	= S5PV210_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PV210_GPH2(0),
-			.ngpio	= S5PV210_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PV210_GPH3(0),
-			.ngpio	= S5PV210_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-#endif
-};
-
-/*
- * Followings are the gpio banks in EXYNOS SoCs
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure exynos_gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of samsung_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-
-#ifdef CONFIG_ARCH_EXYNOS4
-static struct samsung_gpio_chip exynos4_gpios_1[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPA0(0),
-			.ngpio	= EXYNOS4_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPA1(0),
-			.ngpio	= EXYNOS4_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPB(0),
-			.ngpio	= EXYNOS4_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC0(0),
-			.ngpio	= EXYNOS4_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC1(0),
-			.ngpio	= EXYNOS4_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD0(0),
-			.ngpio	= EXYNOS4_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD1(0),
-			.ngpio	= EXYNOS4_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE0(0),
-			.ngpio	= EXYNOS4_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE1(0),
-			.ngpio	= EXYNOS4_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE2(0),
-			.ngpio	= EXYNOS4_GPIO_E2_NR,
-			.label	= "GPE2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE3(0),
-			.ngpio	= EXYNOS4_GPIO_E3_NR,
-			.label	= "GPE3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE4(0),
-			.ngpio	= EXYNOS4_GPIO_E4_NR,
-			.label	= "GPE4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF0(0),
-			.ngpio	= EXYNOS4_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF1(0),
-			.ngpio	= EXYNOS4_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF2(0),
-			.ngpio	= EXYNOS4_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF3(0),
-			.ngpio	= EXYNOS4_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS4
-static struct samsung_gpio_chip exynos4_gpios_2[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPJ0(0),
-			.ngpio	= EXYNOS4_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPJ1(0),
-			.ngpio	= EXYNOS4_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK0(0),
-			.ngpio	= EXYNOS4_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK1(0),
-			.ngpio	= EXYNOS4_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK2(0),
-			.ngpio	= EXYNOS4_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK3(0),
-			.ngpio	= EXYNOS4_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL0(0),
-			.ngpio	= EXYNOS4_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL1(0),
-			.ngpio	= EXYNOS4_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL2(0),
-			.ngpio	= EXYNOS4_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY0(0),
-			.ngpio	= EXYNOS4_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY1(0),
-			.ngpio	= EXYNOS4_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY2(0),
-			.ngpio	= EXYNOS4_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY3(0),
-			.ngpio	= EXYNOS4_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY4(0),
-			.ngpio	= EXYNOS4_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY5(0),
-			.ngpio	= EXYNOS4_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[8],
-		.chip	= {
-			.base	= EXYNOS4_GPY6(0),
-			.ngpio	= EXYNOS4_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS4_GPX0(0),
-			.ngpio	= EXYNOS4_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS4_GPX1(0),
-			.ngpio	= EXYNOS4_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS4_GPX2(0),
-			.ngpio	= EXYNOS4_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS4_GPX3(0),
-			.ngpio	= EXYNOS4_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS4
-static struct samsung_gpio_chip exynos4_gpios_3[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPZ(0),
-			.ngpio	= EXYNOS4_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-static struct samsung_gpio_chip exynos5_gpios_1[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS5_GPA0(0),
-			.ngpio	= EXYNOS5_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPA1(0),
-			.ngpio	= EXYNOS5_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPA2(0),
-			.ngpio	= EXYNOS5_GPIO_A2_NR,
-			.label	= "GPA2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPB0(0),
-			.ngpio	= EXYNOS5_GPIO_B0_NR,
-			.label	= "GPB0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPB1(0),
-			.ngpio	= EXYNOS5_GPIO_B1_NR,
-			.label	= "GPB1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPB2(0),
-			.ngpio	= EXYNOS5_GPIO_B2_NR,
-			.label	= "GPB2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPB3(0),
-			.ngpio	= EXYNOS5_GPIO_B3_NR,
-			.label	= "GPB3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPC0(0),
-			.ngpio	= EXYNOS5_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPC1(0),
-			.ngpio	= EXYNOS5_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPC2(0),
-			.ngpio	= EXYNOS5_GPIO_C2_NR,
-			.label	= "GPC2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPC3(0),
-			.ngpio	= EXYNOS5_GPIO_C3_NR,
-			.label	= "GPC3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPD0(0),
-			.ngpio	= EXYNOS5_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPD1(0),
-			.ngpio	= EXYNOS5_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY0(0),
-			.ngpio	= EXYNOS5_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY1(0),
-			.ngpio	= EXYNOS5_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY2(0),
-			.ngpio	= EXYNOS5_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY3(0),
-			.ngpio	= EXYNOS5_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY4(0),
-			.ngpio	= EXYNOS5_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY5(0),
-			.ngpio	= EXYNOS5_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPY6(0),
-			.ngpio	= EXYNOS5_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS5_GPX0(0),
-			.ngpio	= EXYNOS5_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS5_GPX1(0),
-			.ngpio	= EXYNOS5_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS5_GPX2(0),
-			.ngpio	= EXYNOS5_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.config	= &samsung_gpio_cfgs[9],
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS5_GPX3(0),
-			.ngpio	= EXYNOS5_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-static struct samsung_gpio_chip exynos5_gpios_2[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS5_GPE0(0),
-			.ngpio	= EXYNOS5_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPE1(0),
-			.ngpio	= EXYNOS5_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPF0(0),
-			.ngpio	= EXYNOS5_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPF1(0),
-			.ngpio	= EXYNOS5_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPG0(0),
-			.ngpio	= EXYNOS5_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPG1(0),
-			.ngpio	= EXYNOS5_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPG2(0),
-			.ngpio	= EXYNOS5_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPH0(0),
-			.ngpio	= EXYNOS5_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPH1(0),
-			.ngpio	= EXYNOS5_GPIO_H1_NR,
-			.label	= "GPH1",
-
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-static struct samsung_gpio_chip exynos5_gpios_3[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS5_GPV0(0),
-			.ngpio	= EXYNOS5_GPIO_V0_NR,
-			.label	= "GPV0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPV1(0),
-			.ngpio	= EXYNOS5_GPIO_V1_NR,
-			.label	= "GPV1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPV2(0),
-			.ngpio	= EXYNOS5_GPIO_V2_NR,
-			.label	= "GPV2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPV3(0),
-			.ngpio	= EXYNOS5_GPIO_V3_NR,
-			.label	= "GPV3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS5_GPV4(0),
-			.ngpio	= EXYNOS5_GPIO_V4_NR,
-			.label	= "GPV4",
-		},
-	},
-};
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-static struct samsung_gpio_chip exynos5_gpios_4[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS5_GPZ(0),
-			.ngpio	= EXYNOS5_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-#endif
-
-
-#if defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF)
-static int exynos_gpio_xlate(struct gpio_chip *gc,
-			const struct of_phandle_args *gpiospec, u32 *flags)
-{
-	unsigned int pin;
-
-	if (WARN_ON(gc->of_gpio_n_cells < 4))
-		return -EINVAL;
-
-	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
-		return -EINVAL;
-
-	if (gpiospec->args[0] > gc->ngpio)
-		return -EINVAL;
-
-	pin = gc->base + gpiospec->args[0];
-
-	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
-		pr_warn("gpio_xlate: failed to set pin function\n");
-	if (s3c_gpio_setpull(pin, gpiospec->args[2]))
-		pr_warn("gpio_xlate: failed to set pin pull up/down\n");
-	if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
-		pr_warn("gpio_xlate: failed to set pin drive strength\n");
-
-	return gpiospec->args[0];
-}
-
-static const struct of_device_id exynos_gpio_dt_match[] __initdata = {
-	{ .compatible = "samsung,exynos4-gpio", },
-	{}
-};
-
-static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
-						u64 base, u64 offset)
-{
-	struct gpio_chip *gc =  &chip->chip;
-	u64 address;
-
-	if (!of_have_populated_dt())
-		return;
-
-	address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
-	gc->of_node = of_find_matching_node_by_address(NULL,
-			exynos_gpio_dt_match, address);
-	if (!gc->of_node) {
-		pr_info("gpio: device tree node not found for gpio controller"
-			" with base address %08llx\n", address);
-		return;
-	}
-	gc->of_gpio_n_cells = 4;
-	gc->of_xlate = exynos_gpio_xlate;
-}
-#elif defined(CONFIG_ARCH_EXYNOS)
-static __init void exynos_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
-						u64 base, u64 offset)
-{
-	return;
-}
-#endif /* defined(CONFIG_ARCH_EXYNOS) && defined(CONFIG_OF) */
-
-/* TODO: cleanup soc_is_* */
-static __init int samsung_gpiolib_init(void)
-{
-	struct samsung_gpio_chip *chip;
-	int i, nr_chips;
-#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS5250)
-	void __iomem *gpio_base1, *gpio_base2, *gpio_base3, *gpio_base4;
-#endif
-	int group = 0;
-
-	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
-
-	if (soc_is_s3c24xx()) {
-		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
-				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
-	} else if (soc_is_s3c64xx()) {
-		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
-				ARRAY_SIZE(s3c64xx_gpios_2bit),
-				S3C64XX_VA_GPIO + 0xE0, 0x20);
-		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
-				ARRAY_SIZE(s3c64xx_gpios_4bit),
-				S3C64XX_VA_GPIO);
-		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
-				ARRAY_SIZE(s3c64xx_gpios_4bit2));
-	} else if (soc_is_s5p6440()) {
-		samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
-				ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
-		samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
-				ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
-		samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
-				ARRAY_SIZE(s5p6440_gpios_4bit2));
-		s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
-				ARRAY_SIZE(s5p6440_gpios_rbank));
-	} else if (soc_is_s5p6450()) {
-		samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
-				ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
-		samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
-				ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
-		samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
-				ARRAY_SIZE(s5p6450_gpios_4bit2));
-		s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
-				ARRAY_SIZE(s5p6450_gpios_rbank));
-	} else if (soc_is_s5pc100()) {
-		group = 0;
-		chip = s5pc100_gpios_4bit;
-		nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &samsung_gpio_cfgs[3];
-				chip->group = group++;
-			}
-		}
-		samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
-#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
-		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-#endif
-	} else if (soc_is_s5pv210()) {
-		group = 0;
-		chip = s5pv210_gpios_4bit;
-		nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &samsung_gpio_cfgs[3];
-				chip->group = group++;
-			}
-		}
-		samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
-#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
-		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-#endif
-	} else if (soc_is_exynos4210()) {
-#ifdef CONFIG_CPU_EXYNOS4210
-		void __iomem *gpx_base;
-
-		/* gpio part1 */
-		gpio_base1 = ioremap(EXYNOS4_PA_GPIO1, SZ_4K);
-		if (gpio_base1 == NULL) {
-			pr_err("unable to ioremap for gpio_base1\n");
-			goto err_ioremap1;
-		}
-
-		chip = exynos4_gpios_1;
-		nr_chips = ARRAY_SIZE(exynos4_gpios_1);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS4_PA_GPIO1, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1,
-					       nr_chips, gpio_base1);
-
-		/* gpio part2 */
-		gpio_base2 = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
-		if (gpio_base2 == NULL) {
-			pr_err("unable to ioremap for gpio_base2\n");
-			goto err_ioremap2;
-		}
-
-		/* need to set base address for gpx */
-		chip = &exynos4_gpios_2[16];
-		gpx_base = gpio_base2 + 0xC00;
-		for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
-			chip->base = gpx_base;
-
-		chip = exynos4_gpios_2;
-		nr_chips = ARRAY_SIZE(exynos4_gpios_2);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS4_PA_GPIO2, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2,
-					       nr_chips, gpio_base2);
-
-		/* gpio part3 */
-		gpio_base3 = ioremap(EXYNOS4_PA_GPIO3, SZ_256);
-		if (gpio_base3 == NULL) {
-			pr_err("unable to ioremap for gpio_base3\n");
-			goto err_ioremap3;
-		}
-
-		chip = exynos4_gpios_3;
-		nr_chips = ARRAY_SIZE(exynos4_gpios_3);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS4_PA_GPIO3, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3,
-					       nr_chips, gpio_base3);
-
-#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
-		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
-		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-#endif
-
-#endif	/* CONFIG_CPU_EXYNOS4210 */
-	} else if (soc_is_exynos5250()) {
-#ifdef CONFIG_SOC_EXYNOS5250
-		void __iomem *gpx_base;
-
-		/* gpio part1 */
-		gpio_base1 = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
-		if (gpio_base1 == NULL) {
-			pr_err("unable to ioremap for gpio_base1\n");
-			goto err_ioremap1;
-		}
-
-		/* need to set base address for gpx */
-		chip = &exynos5_gpios_1[20];
-		gpx_base = gpio_base1 + 0xC00;
-		for (i = 0; i < 4; i++, chip++, gpx_base += 0x20)
-			chip->base = gpx_base;
-
-		chip = exynos5_gpios_1;
-		nr_chips = ARRAY_SIZE(exynos5_gpios_1);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS5_PA_GPIO1, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos5_gpios_1,
-					       nr_chips, gpio_base1);
-
-		/* gpio part2 */
-		gpio_base2 = ioremap(EXYNOS5_PA_GPIO2, SZ_4K);
-		if (gpio_base2 == NULL) {
-			pr_err("unable to ioremap for gpio_base2\n");
-			goto err_ioremap2;
-		}
-
-		chip = exynos5_gpios_2;
-		nr_chips = ARRAY_SIZE(exynos5_gpios_2);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS5_PA_GPIO2, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos5_gpios_2,
-					       nr_chips, gpio_base2);
-
-		/* gpio part3 */
-		gpio_base3 = ioremap(EXYNOS5_PA_GPIO3, SZ_4K);
-		if (gpio_base3 == NULL) {
-			pr_err("unable to ioremap for gpio_base3\n");
-			goto err_ioremap3;
-		}
-
-		/* need to set base address for gpv */
-		exynos5_gpios_3[0].base = gpio_base3;
-		exynos5_gpios_3[1].base = gpio_base3 + 0x20;
-		exynos5_gpios_3[2].base = gpio_base3 + 0x60;
-		exynos5_gpios_3[3].base = gpio_base3 + 0x80;
-		exynos5_gpios_3[4].base = gpio_base3 + 0xC0;
-
-		chip = exynos5_gpios_3;
-		nr_chips = ARRAY_SIZE(exynos5_gpios_3);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS5_PA_GPIO3, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos5_gpios_3,
-					       nr_chips, gpio_base3);
-
-		/* gpio part4 */
-		gpio_base4 = ioremap(EXYNOS5_PA_GPIO4, SZ_4K);
-		if (gpio_base4 == NULL) {
-			pr_err("unable to ioremap for gpio_base4\n");
-			goto err_ioremap4;
-		}
-
-		chip = exynos5_gpios_4;
-		nr_chips = ARRAY_SIZE(exynos5_gpios_4);
-
-		for (i = 0; i < nr_chips; i++, chip++) {
-			if (!chip->config) {
-				chip->config = &exynos_gpio_cfg;
-				chip->group = group++;
-			}
-			exynos_gpiolib_attach_ofnode(chip,
-					EXYNOS5_PA_GPIO4, i * 0x20);
-		}
-		samsung_gpiolib_add_4bit_chips(exynos5_gpios_4,
-					       nr_chips, gpio_base4);
-#endif	/* CONFIG_SOC_EXYNOS5250 */
-	} else {
-		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
-		return -ENODEV;
-	}
-
-	return 0;
-
-#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS5250)
-err_ioremap4:
-	iounmap(gpio_base3);
-err_ioremap3:
-	iounmap(gpio_base2);
-err_ioremap2:
-	iounmap(gpio_base1);
-err_ioremap1:
-	return -ENOMEM;
-#endif
-}
-core_initcall(samsung_gpiolib_init);
-
-int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	int ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	samsung_gpio_lock(chip, flags);
-	ret = samsung_gpio_do_setcfg(chip, offset, config);
-	samsung_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_cfgpin);
-
-int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
-
-int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-			  unsigned int cfg, samsung_gpio_pull_t pull)
-{
-	int ret;
-
-	for (; nr > 0; nr--, start++) {
-		s3c_gpio_setpull(start, pull);
-		ret = s3c_gpio_cfgpin(start, cfg);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
-
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		ret = samsung_gpio_do_getcfg(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
-int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset, ret;
-
-	if (!chip)
-		return -EINVAL;
-
-	offset = pin - chip->chip.base;
-
-	samsung_gpio_lock(chip, flags);
-	ret = samsung_gpio_do_setpull(chip, offset, pull);
-	samsung_gpio_unlock(chip, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_setpull);
-
-samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		pup = samsung_gpio_do_getpull(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return (__force samsung_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-/* gpiolib wrappers until these are totally eliminated */
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
-	int ret;
-
-	WARN_ON(to);	/* should be none of these left */
-
-	if (!to) {
-		/* if pull is enabled, try first with up, and if that
-		 * fails, try using down */
-
-		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
-		if (ret)
-			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
-	} else {
-		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
-	}
-}
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	/* do this via gpiolib until all users removed */
-
-	gpio_request(pin, "temporary");
-	gpio_set_value(pin, to);
-	gpio_free(pin);
-}
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-
-	return __raw_readl(chip->base + 0x04) & (1 << offs);
-}
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-#ifdef CONFIG_S5P_GPIO_DRVSTR
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = drvstr >> shift;
-	drvstr &= 0x3;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned int off;
-	void __iomem *reg;
-	int shift;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	off = pin - chip->chip.base;
-	shift = off * 2;
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp &= ~(0x3 << shift);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
-#endif	/* CONFIG_S5P_GPIO_DRVSTR */
-
-#ifdef CONFIG_PLAT_S3C24XX
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-#endif