Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 376 deletions

diff --git a/ANDROID_3.4.5/arch/unicore32/kernel/irq.c b/ANDROID_3.4.5/arch/unicore32/kernel/irq.c
deleted file mode 100644
index 0be5ccd7..00000000
--- a/ANDROID_3.4.5/arch/unicore32/kernel/irq.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * linux/arch/unicore32/kernel/irq.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/kallsyms.h>
-#include <linux/proc_fs.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-
-#include "setup.h"
-
-/*
- * PKUnity GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask = 0;
-
-#define GPIO_MASK(irq)		(1 << (irq - IRQ_GPIO0))
-
-static int puv3_gpio_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int mask;
-
-	if (d->irq < IRQ_GPIOHIGH)
-		mask = 1 << d->irq;
-	else
-		mask = GPIO_MASK(d->irq);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 7.
- */
-static void puv3_low_gpio_ack(struct irq_data *d)
-{
-	writel((1 << d->irq), GPIO_GEDR);
-}
-
-static void puv3_low_gpio_mask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_low_gpio_unmask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_low_gpio_chip = {
-	.name		= "GPIO-low",
-	.irq_ack	= puv3_low_gpio_ack,
-	.irq_mask	= puv3_low_gpio_mask,
-	.irq_unmask	= puv3_low_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_low_gpio_wake,
-};
-
-/*
- * IRQ8 (GPIO0 through 27) handler.  We enter here with the
- * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
- * and call the handler.
- */
-static void
-puv3_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int mask;
-
-	mask = readl(GPIO_GEDR);
-	do {
-		/*
-		 * clear down all currently active IRQ sources.
-		 * We will be processing them all.
-		 */
-		writel(mask, GPIO_GEDR);
-
-		irq = IRQ_GPIO0;
-		do {
-			if (mask & 1)
-				generic_handle_irq(irq);
-			mask >>= 1;
-			irq++;
-		} while (mask);
-		mask = readl(GPIO_GEDR);
-	} while (mask);
-}
-
-/*
- * GPIO0-27 edge IRQs need to be handled specially.
- * In addition, the IRQs are all collected up into one bit in the
- * interrupt controller registers.
- */
-static void puv3_high_gpio_ack(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	writel(mask, GPIO_GEDR);
-}
-
-static void puv3_high_gpio_mask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask &= ~mask;
-
-	writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
-	writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
-}
-
-static void puv3_high_gpio_unmask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask |= mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-}
-
-static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_high_gpio_chip = {
-	.name		= "GPIO-high",
-	.irq_ack	= puv3_high_gpio_ack,
-	.irq_mask	= puv3_high_gpio_mask,
-	.irq_unmask	= puv3_high_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_high_gpio_wake,
-};
-
-/*
- * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
- * this is for internal IRQs i.e. from 8 to 31.
- */
-static void puv3_mask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_unmask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
-static int puv3_set_wake(struct irq_data *d, unsigned int on)
-{
-	if (d->irq == IRQ_RTCAlarm) {
-		if (on)
-			writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
-		else
-			writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct irq_chip puv3_normal_chip = {
-	.name		= "PKUnity-v3",
-	.irq_ack	= puv3_mask_irq,
-	.irq_mask	= puv3_mask_irq,
-	.irq_unmask	= puv3_unmask_irq,
-	.irq_set_wake	= puv3_set_wake,
-};
-
-static struct resource irq_resource = {
-	.name	= "irqs",
-	.start	= io_v2p(PKUNITY_INTC_BASE),
-	.end	= io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
-};
-
-static struct puv3_irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} puv3_irq_state;
-
-static int puv3_irq_suspend(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	st->saved = 1;
-	st->icmr = readl(INTC_ICMR);
-	st->iclr = readl(INTC_ICLR);
-	st->iccr = readl(INTC_ICCR);
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
-
-	/*
-	 * Set the appropriate edges for wakeup.
-	 */
-	writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
-	writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
-
-	/*
-	 * Clear any pending GPIO interrupts.
-	 */
-	writel(readl(GPIO_GEDR), GPIO_GEDR);
-
-	return 0;
-}
-
-static void puv3_irq_resume(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	if (st->saved) {
-		writel(st->iccr, INTC_ICCR);
-		writel(st->iclr, INTC_ICLR);
-
-		writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-		writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-		writel(st->icmr, INTC_ICMR);
-	}
-}
-
-static struct syscore_ops puv3_irq_syscore_ops = {
-	.suspend	= puv3_irq_suspend,
-	.resume		= puv3_irq_resume,
-};
-
-static int __init puv3_irq_init_syscore(void)
-{
-	register_syscore_ops(&puv3_irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(puv3_irq_init_syscore);
-
-void __init init_IRQ(void)
-{
-	unsigned int irq;
-
-	request_resource(&iomem_resource, &irq_resource);
-
-	/* disable all IRQs */
-	writel(0, INTC_ICMR);
-
-	/* all IRQs are IRQ, not REAL */
-	writel(0, INTC_ICLR);
-
-	/* clear all GPIO edge detects */
-	writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
-	writel(0, GPIO_GFER);
-	writel(0, GPIO_GRER);
-	writel(0x0FFFFFFF, GPIO_GEDR);
-
-	writel(1, INTC_ICCR);
-
-	for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
-		irq_set_chip(irq, &puv3_low_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
-		irq_set_chip(irq, &puv3_normal_chip);
-		irq_set_handler(irq, handle_level_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOAUTOEN,
-			IRQ_NOPROBE);
-	}
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
-		irq_set_chip(irq, &puv3_high_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	/*
-	 * Install handler for GPIO 0-27 edge detect interrupts
-	 */
-	irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
-	irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
-
-#ifdef CONFIG_PUV3_GPIO
-	puv3_init_gpio();
-#endif
-}
-
-/*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-