Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 342 deletions

diff --git a/ANDROID_3.4.5/arch/powerpc/platforms/pasemi/gpio_mdio.c b/ANDROID_3.4.5/arch/powerpc/platforms/pasemi/gpio_mdio.c
deleted file mode 100644
index 9886296e..00000000
--- a/ANDROID_3.4.5/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 2006-2007 PA Semi, Inc
- *
- * Author: Olof Johansson, PA Semi
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * Based on drivers/net/fs_enet/mii-bitbang.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <linux/of_mdio.h>
-#include <linux/of_platform.h>
-
-#define DELAY 1
-
-static void __iomem *gpio_regs;
-
-struct gpio_priv {
-	int mdc_pin;
-	int mdio_pin;
-	int mdio_irqs[PHY_MAX_ADDR];
-};
-
-#define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
-#define MDIO_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdio_pin)
-
-static inline void mdio_lo(struct mii_bus *bus)
-{
-	out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
-}
-
-static inline void mdio_hi(struct mii_bus *bus)
-{
-	out_le32(gpio_regs, 1 << MDIO_PIN(bus));
-}
-
-static inline void mdc_lo(struct mii_bus *bus)
-{
-	out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
-}
-
-static inline void mdc_hi(struct mii_bus *bus)
-{
-	out_le32(gpio_regs, 1 << MDC_PIN(bus));
-}
-
-static inline void mdio_active(struct mii_bus *bus)
-{
-	out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
-}
-
-static inline void mdio_tristate(struct mii_bus *bus)
-{
-	out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
-}
-
-static inline int mdio_read(struct mii_bus *bus)
-{
-	return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
-}
-
-static void clock_out(struct mii_bus *bus, int bit)
-{
-	if (bit)
-		mdio_hi(bus);
-	else
-		mdio_lo(bus);
-	udelay(DELAY);
-	mdc_hi(bus);
-	udelay(DELAY);
-	mdc_lo(bus);
-}
-
-/* Utility to send the preamble, address, and register (common to read and write). */
-static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
-{
-	int i;
-
-	/* CFE uses a really long preamble (40 bits). We'll do the same. */
-	mdio_active(bus);
-	for (i = 0; i < 40; i++) {
-		clock_out(bus, 1);
-	}
-
-	/* send the start bit (01) and the read opcode (10) or write (10) */
-	clock_out(bus, 0);
-	clock_out(bus, 1);
-
-	clock_out(bus, read);
-	clock_out(bus, !read);
-
-	/* send the PHY address */
-	for (i = 0; i < 5; i++) {
-		clock_out(bus, (addr & 0x10) != 0);
-		addr <<= 1;
-	}
-
-	/* send the register address */
-	for (i = 0; i < 5; i++) {
-		clock_out(bus, (reg & 0x10) != 0);
-		reg <<= 1;
-	}
-}
-
-static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
-{
-	u16 rdreg;
-	int ret, i;
-	u8 addr = phy_id & 0xff;
-	u8 reg = location & 0xff;
-
-	bitbang_pre(bus, 1, addr, reg);
-
-	/* tri-state our MDIO I/O pin so we can read */
-	mdio_tristate(bus);
-	udelay(DELAY);
-	mdc_hi(bus);
-	udelay(DELAY);
-	mdc_lo(bus);
-
-	/* read 16 bits of register data, MSB first */
-	rdreg = 0;
-	for (i = 0; i < 16; i++) {
-		mdc_lo(bus);
-		udelay(DELAY);
-		mdc_hi(bus);
-		udelay(DELAY);
-		mdc_lo(bus);
-		udelay(DELAY);
-		rdreg <<= 1;
-		rdreg |= mdio_read(bus);
-	}
-
-	mdc_hi(bus);
-	udelay(DELAY);
-	mdc_lo(bus);
-	udelay(DELAY);
-
-	ret = rdreg;
-
-	return ret;
-}
-
-static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
-{
-	int i;
-
-	u8 addr = phy_id & 0xff;
-	u8 reg = location & 0xff;
-	u16 value = val & 0xffff;
-
-	bitbang_pre(bus, 0, addr, reg);
-
-	/* send the turnaround (10) */
-	mdc_lo(bus);
-	mdio_hi(bus);
-	udelay(DELAY);
-	mdc_hi(bus);
-	udelay(DELAY);
-	mdc_lo(bus);
-	mdio_lo(bus);
-	udelay(DELAY);
-	mdc_hi(bus);
-	udelay(DELAY);
-
-	/* write 16 bits of register data, MSB first */
-	for (i = 0; i < 16; i++) {
-		mdc_lo(bus);
-		if (value & 0x8000)
-			mdio_hi(bus);
-		else
-			mdio_lo(bus);
-		udelay(DELAY);
-		mdc_hi(bus);
-		udelay(DELAY);
-		value <<= 1;
-	}
-
-	/*
-	 * Tri-state the MDIO line.
-	 */
-	mdio_tristate(bus);
-	mdc_lo(bus);
-	udelay(DELAY);
-	mdc_hi(bus);
-	udelay(DELAY);
-	return 0;
-}
-
-static int gpio_mdio_reset(struct mii_bus *bus)
-{
-	/*nothing here - dunno how to reset it*/
-	return 0;
-}
-
-
-static int __devinit gpio_mdio_probe(struct platform_device *ofdev)
-{
-	struct device *dev = &ofdev->dev;
-	struct device_node *np = ofdev->dev.of_node;
-	struct mii_bus *new_bus;
-	struct gpio_priv *priv;
-	const unsigned int *prop;
-	int err;
-
-	err = -ENOMEM;
-	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
-	if (!priv)
-		goto out;
-
-	new_bus = mdiobus_alloc();
-
-	if (!new_bus)
-		goto out_free_priv;
-
-	new_bus->name = "pasemi gpio mdio bus";
-	new_bus->read = &gpio_mdio_read;
-	new_bus->write = &gpio_mdio_write;
-	new_bus->reset = &gpio_mdio_reset;
-
-	prop = of_get_property(np, "reg", NULL);
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
-	new_bus->priv = priv;
-
-	new_bus->irq = priv->mdio_irqs;
-
-	prop = of_get_property(np, "mdc-pin", NULL);
-	priv->mdc_pin = *prop;
-
-	prop = of_get_property(np, "mdio-pin", NULL);
-	priv->mdio_pin = *prop;
-
-	new_bus->parent = dev;
-	dev_set_drvdata(dev, new_bus);
-
-	err = of_mdiobus_register(new_bus, np);
-
-	if (err != 0) {
-		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
-				new_bus->name, err);
-		goto out_free_irq;
-	}
-
-	return 0;
-
-out_free_irq:
-	kfree(new_bus);
-out_free_priv:
-	kfree(priv);
-out:
-	return err;
-}
-
-
-static int gpio_mdio_remove(struct platform_device *dev)
-{
-	struct mii_bus *bus = dev_get_drvdata(&dev->dev);
-
-	mdiobus_unregister(bus);
-
-	dev_set_drvdata(&dev->dev, NULL);
-
-	kfree(bus->priv);
-	bus->priv = NULL;
-	mdiobus_free(bus);
-
-	return 0;
-}
-
-static struct of_device_id gpio_mdio_match[] =
-{
-	{
-		.compatible      = "gpio-mdio",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, gpio_mdio_match);
-
-static struct platform_driver gpio_mdio_driver =
-{
-	.probe		= gpio_mdio_probe,
-	.remove		= gpio_mdio_remove,
-	.driver = {
-		.name = "gpio-mdio-bitbang",
-		.owner = THIS_MODULE,
-		.of_match_table = gpio_mdio_match,
-	},
-};
-
-int gpio_mdio_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
-	if (!np)
-		np = of_find_compatible_node(NULL, NULL,
-					     "pasemi,pwrficient-gpio");
-	if (!np)
-		return -ENODEV;
-	gpio_regs = of_iomap(np, 0);
-	of_node_put(np);
-
-	if (!gpio_regs)
-		return -ENODEV;
-
-	return platform_driver_register(&gpio_mdio_driver);
-}
-module_init(gpio_mdio_init);
-
-void gpio_mdio_exit(void)
-{
-	platform_driver_unregister(&gpio_mdio_driver);
-	if (gpio_regs)
-		iounmap(gpio_regs);
-}
-module_exit(gpio_mdio_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");