Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 168 deletions

diff --git a/ANDROID_3.4.5/arch/powerpc/platforms/44x/iss4xx.c b/ANDROID_3.4.5/arch/powerpc/platforms/44x/iss4xx.c
deleted file mode 100644
index a28a8629..00000000
--- a/ANDROID_3.4.5/arch/powerpc/platforms/44x/iss4xx.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * PPC476 board specific routines
- *
- * Copyright 2010 Torez Smith, IBM Corporation.
- *
- * Based on earlier code:
- *    Matt Porter <mporter@kernel.crashing.org>
- *    Copyright 2002-2005 MontaVista Software Inc.
- *
- *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- *    Copyright (c) 2003-2005 Zultys Technologies
- *
- *    Rewritten and ported to the merged powerpc tree:
- *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-#include <asm/mpic.h>
-#include <asm/mmu.h>
-
-static __initdata struct of_device_id iss4xx_of_bus[] = {
-	{ .compatible = "ibm,plb4", },
-	{ .compatible = "ibm,plb6", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init iss4xx_device_probe(void)
-{
-	of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
-	of_instantiate_rtc();
-
-	return 0;
-}
-machine_device_initcall(iss4xx, iss4xx_device_probe);
-
-/* We can have either UICs or MPICs */
-static void __init iss4xx_init_irq(void)
-{
-	struct device_node *np;
-
-	/* Find top level interrupt controller */
-	for_each_node_with_property(np, "interrupt-controller") {
-		if (of_get_property(np, "interrupts", NULL) == NULL)
-			break;
-	}
-	if (np == NULL)
-		panic("Can't find top level interrupt controller");
-
-	/* Check type and do appropriate initialization */
-	if (of_device_is_compatible(np, "ibm,uic")) {
-		uic_init_tree();
-		ppc_md.get_irq = uic_get_irq;
-#ifdef CONFIG_MPIC
-	} else if (of_device_is_compatible(np, "chrp,open-pic")) {
-		/* The MPIC driver will get everything it needs from the
-		 * device-tree, just pass 0 to all arguments
-		 */
-		struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC     ");
-		BUG_ON(mpic == NULL);
-		mpic_init(mpic);
-		ppc_md.get_irq = mpic_get_irq;
-#endif
-	} else
-		panic("Unrecognized top level interrupt controller");
-}
-
-#ifdef CONFIG_SMP
-static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
-{
-	mpic_setup_this_cpu();
-}
-
-static int __cpuinit smp_iss4xx_kick_cpu(int cpu)
-{
-	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
-	const u64 *spin_table_addr_prop;
-	u32 *spin_table;
-	extern void start_secondary_47x(void);
-
-	BUG_ON(cpunode == NULL);
-
-	/* Assume spin table. We could test for the enable-method in
-	 * the device-tree but currently there's little point as it's
-	 * our only supported method
-	 */
-	spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
-					       NULL);
-	if (spin_table_addr_prop == NULL) {
-		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
-		return -ENOENT;
-	}
-
-	/* Assume it's mapped as part of the linear mapping. This is a bit
-	 * fishy but will work fine for now
-	 */
-	spin_table = (u32 *)__va(*spin_table_addr_prop);
-	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
-
-	spin_table[3] = cpu;
-	smp_wmb();
-	spin_table[1] = __pa(start_secondary_47x);
-	mb();
-
-	return 0;
-}
-
-static struct smp_ops_t iss_smp_ops = {
-	.probe		= smp_mpic_probe,
-	.message_pass	= smp_mpic_message_pass,
-	.setup_cpu	= smp_iss4xx_setup_cpu,
-	.kick_cpu	= smp_iss4xx_kick_cpu,
-	.give_timebase	= smp_generic_give_timebase,
-	.take_timebase	= smp_generic_take_timebase,
-};
-
-static void __init iss4xx_smp_init(void)
-{
-	if (mmu_has_feature(MMU_FTR_TYPE_47x))
-		smp_ops = &iss_smp_ops;
-}
-
-#else /* CONFIG_SMP */
-static void __init iss4xx_smp_init(void) { }
-#endif /* CONFIG_SMP */
-
-static void __init iss4xx_setup_arch(void)
-{
-	iss4xx_smp_init();
-}
-
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init iss4xx_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
-		return 0;
-
-	return 1;
-}
-
-define_machine(iss4xx) {
-	.name			= "ISS-4xx",
-	.probe			= iss4xx_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= iss4xx_init_irq,
-	.setup_arch		= iss4xx_setup_arch,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};