Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 168 deletions

diff --git a/ANDROID_3.4.5/arch/powerpc/boot/dts/a4m072.dts b/ANDROID_3.4.5/arch/powerpc/boot/dts/a4m072.dts
deleted file mode 100644
index fabe7b7d..00000000
--- a/ANDROID_3.4.5/arch/powerpc/boot/dts/a4m072.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * a4m072 board Device Tree Source
- *
- * Copyright (C) 2011 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-/ {
-	model = "anonymous,a4m072";
-	compatible = "anonymous,a4m072";
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>; /* From boot loader */
-		system-frequency = <0>; /* From boot loader */
-
-		cdm@200 {
-			fsl,init-ext-48mhz-en = <0x0>;
-			fsl,init-fd-enable = <0x01>;
-			fsl,init-fd-counters = <0x3333>;
-		};
-
-		timer@600 {
-			fsl,has-wdt;
-		};
-
-		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
-			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			status = "disabled";
-		};
-
-		psc@2000 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		psc@2200 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
-		};
-
-		psc@2400 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
-		psc@2600 {
-			status = "disabled";
-		};
-
-		psc@2800 {
-			status = "disabled";
-		};
-
-		psc@2c00 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@1f {
-				reg = <0x1f>;
-				interrupts = <1 2 0>; /* IRQ 2 active low */
-			};
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			hwmon@2e {
-				compatible = "nsc,lm87";
-				reg = <0x2e>;
-			};
-			rtc@51 {
-				compatible = "nxp,rtc8564";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfe000000 0x02000000
-			  1 0 0x62000000 0x00400000
-			  2 0 0x64000000 0x00200000
-			  3 0 0x66000000 0x01000000
-			  6 0 0x68000000 0x01000000
-			  7 0 0x6a000000 0x00000004>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-		sram0@1,0 {
-			compatible = "mtd-ram";
-			reg = <1 0x00000 0x00400000>;
-			bank-width = <2>;
-		};
-	};
-
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				 /* IDSEL 0x16 */
-				 0xc000 0 0 1 &mpc5200_pic 1 3 3
-				 0xc000 0 0 2 &mpc5200_pic 1 3 3
-				 0xc000 0 0 3 &mpc5200_pic 1 3 3
-				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
-		clock-frequency = <0>; /* From boot loader */
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-};