Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

6 files changed, 0 insertions, 1592 deletions

diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/Makefile b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/Makefile
deleted file mode 100644
index 0de59084..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o io.o
diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
deleted file mode 100644
index 525dab46..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:200:50:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 3
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:16MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x08ffffff (16MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 16MB
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d200000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB
deleted file mode 100644
index aa503657..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:300:75:75
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 5
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00051502
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010e24
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d300000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d75000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB
deleted file mode 100644
index adc608aa..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:400:100:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 3
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 7
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d400000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/io.c b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/io.c
deleted file mode 100644
index 6862586e..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/io.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/m32r/platforms/m32700ut/io.c
- *
- *  Typical I/O routines for M32700UT board.
- *
- *  Copyright (c) 2001-2005  Hiroyuki Kondo, Hirokazu Takata,
- *                           Hitoshi Yamamoto, Takeo Takahashi
- *
- *  This file is subject to the terms and conditions of the GNU General
- *  Public License.  See the file "COPYING" in the main directory of this
- *  archive for more details.
- */
-
-#include <asm/m32r.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-#include <linux/types.h>
-
-#define M32R_PCC_IOMAP_SIZE 0x1000
-
-#define M32R_PCC_IOSTART0 0x1000
-#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
-
-extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
-#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */
-
-#define PORT2ADDR(port)		_port2addr(port)
-#define PORT2ADDR_USB(port)	_port2addr_usb(port)
-
-static inline void *_port2addr(unsigned long port)
-{
-	return (void *)(port | NONCACHE_OFFSET);
-}
-
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-static inline void *__port2addr_ata(unsigned long port)
-{
-	static int	dummy_reg;
-
-	switch (port) {
-	case 0x1f0:	return (void *)(0x0c002000 | NONCACHE_OFFSET);
-	case 0x1f1:	return (void *)(0x0c012800 | NONCACHE_OFFSET);
-	case 0x1f2:	return (void *)(0x0c012002 | NONCACHE_OFFSET);
-	case 0x1f3:	return (void *)(0x0c012802 | NONCACHE_OFFSET);
-	case 0x1f4:	return (void *)(0x0c012004 | NONCACHE_OFFSET);
-	case 0x1f5:	return (void *)(0x0c012804 | NONCACHE_OFFSET);
-	case 0x1f6:	return (void *)(0x0c012006 | NONCACHE_OFFSET);
-	case 0x1f7:	return (void *)(0x0c012806 | NONCACHE_OFFSET);
-	case 0x3f6:	return (void *)(0x0c01200e | NONCACHE_OFFSET);
-	default: 	return (void *)&dummy_reg;
-	}
-}
-#endif
-
-/*
- * M32700UT-LAN is located in the extended bus space
- * from 0x10000000 to 0x13ffffff on physical address.
- * The base address of LAN controller(LAN91C111) is 0x300.
- */
-#define LAN_IOSTART	(0x300 | NONCACHE_OFFSET)
-#define LAN_IOEND	(0x320 | NONCACHE_OFFSET)
-static inline void *_port2addr_ne(unsigned long port)
-{
-	return (void *)(port + 0x10000000);
-}
-static inline void *_port2addr_usb(unsigned long port)
-{
-	return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000);
-}
-
-static inline void delay(void)
-{
-	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
-}
-
-/*
- * NIC I/O function
- */
-
-#define PORT2ADDR_NE(port)  _port2addr_ne(port)
-
-static inline unsigned char _ne_inb(void *portp)
-{
-	return *(volatile unsigned char *)portp;
-}
-
-static inline unsigned short _ne_inw(void *portp)
-{
-	return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);
-}
-
-static inline void _ne_insb(void *portp, void *addr, unsigned long count)
-{
-	unsigned char *buf = (unsigned char *)addr;
-
-	while (count--)
-		*buf++ = _ne_inb(portp);
-}
-
-static inline void _ne_outb(unsigned char b, void *portp)
-{
-	*(volatile unsigned char *)portp = b;
-}
-
-static inline void _ne_outw(unsigned short w, void *portp)
-{
-	*(volatile unsigned short *)portp = cpu_to_le16(w);
-}
-
-unsigned char _inb(unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		return _ne_inb(PORT2ADDR_NE(port));
-
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		return *(volatile unsigned char *)__port2addr_ata(port);
-	}
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned char b;
-		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
-		return b;
-	} else
-#endif
-
-	return *(volatile unsigned char *)PORT2ADDR(port);
-}
-
-unsigned short _inw(unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		return *(volatile unsigned short *)__port2addr_ata(port);
-	}
-#endif
-#if defined(CONFIG_USB)
-	else if(port >= 0x340 && port < 0x3a0)
-		return *(volatile unsigned short *)PORT2ADDR_USB(port);
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned short w;
-		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
-		return w;
-	} else
-#endif
-	return *(volatile unsigned short *)PORT2ADDR(port);
-}
-
-unsigned long _inl(unsigned long port)
-{
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned long l;
-		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
-		return l;
-	} else
-#endif
-	return *(volatile unsigned long *)PORT2ADDR(port);
-}
-
-unsigned char _inb_p(unsigned long port)
-{
-	unsigned char v = _inb(port);
-	delay();
-	return (v);
-}
-
-unsigned short _inw_p(unsigned long port)
-{
-	unsigned short v = _inw(port);
-	delay();
-	return (v);
-}
-
-unsigned long _inl_p(unsigned long port)
-{
-	unsigned long v = _inl(port);
-	delay();
-	return (v);
-}
-
-void _outb(unsigned char b, unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_outb(b, PORT2ADDR_NE(port));
-	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		*(volatile unsigned char *)__port2addr_ata(port) = b;
-	} else
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
-	} else
-#endif
-		*(volatile unsigned char *)PORT2ADDR(port) = b;
-}
-
-void _outw(unsigned short w, unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_outw(w, PORT2ADDR_NE(port));
-	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		*(volatile unsigned short *)__port2addr_ata(port) = w;
-	} else
-#endif
-#if defined(CONFIG_USB)
-	if(port >= 0x340 && port < 0x3a0)
-		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
-	else
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
-	} else
-#endif
-		*(volatile unsigned short *)PORT2ADDR(port) = w;
-}
-
-void _outl(unsigned long l, unsigned long port)
-{
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
-	} else
-#endif
-	*(volatile unsigned long *)PORT2ADDR(port) = l;
-}
-
-void _outb_p(unsigned char b, unsigned long port)
-{
-	_outb(b, port);
-	delay();
-}
-
-void _outw_p(unsigned short w, unsigned long port)
-{
-	_outw(w, port);
-	delay();
-}
-
-void _outl_p(unsigned long l, unsigned long port)
-{
-	_outl(l, port);
-	delay();
-}
-
-void _insb(unsigned int port, void *addr, unsigned long count)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		unsigned char *buf = addr;
-		unsigned char *portp = __port2addr_ata(port);
-		while (count--)
-			*buf++ = *(volatile unsigned char *)portp;
-	}
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
-				count, 1);
-	}
-#endif
-	else {
-		unsigned char *buf = addr;
-		unsigned char *portp = PORT2ADDR(port);
-		while (count--)
-			*buf++ = *(volatile unsigned char *)portp;
-	}
-}
-
-void _insw(unsigned int port, void *addr, unsigned long count)
-{
-	unsigned short *buf = addr;
-	unsigned short *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		/*
-		 * This portion is only used by smc91111.c to read data
-		 * from the DATA_REG. Do not swap the data.
-		 */
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
-				count, 1);
-#endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-	}
-}
-
-void _insl(unsigned int port, void *addr, unsigned long count)
-{
-	unsigned long *buf = addr;
-	unsigned long *portp;
-
-	portp = PORT2ADDR(port);
-	while (count--)
-		*buf++ = *(volatile unsigned long *)portp;
-}
-
-void _outsb(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned char *buf = addr;
-	unsigned char *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*(volatile unsigned char *)portp = *buf++;
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
-				 count, 1);
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*(volatile unsigned char *)portp = *buf++;
-	}
-}
-
-void _outsw(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned short *buf = addr;
-	unsigned short *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		/*
-		 * This portion is only used by smc91111.c to write data
-		 * into the DATA_REG. Do not swap the data.
-		 */
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
-				 count, 1);
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-	}
-}
-
-void _outsl(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned long *buf = addr;
-	unsigned char *portp;
-
-	portp = PORT2ADDR(port);
-	while (count--)
-		*(volatile unsigned long *)portp = *buf++;
-}
diff --git a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/setup.c b/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/setup.c
deleted file mode 100644
index 9a4ba8a8..00000000
--- a/ANDROID_3.4.5/arch/m32r/platforms/m32700ut/setup.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- *  linux/arch/m32r/platforms/m32700ut/setup.c
- *
- *  Setup routines for Renesas M32700UT Board
- *
- *  Copyright (c) 2002-2005  Hiroyuki Kondo, Hirokazu Takata,
- *                           Hitoshi Yamamoto, Takeo Takahashi
- *
- *  This file is subject to the terms and conditions of the GNU General
- *  Public License.  See the file "COPYING" in the main directory of this
- *  archive for more details.
- */
-
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-
-/*
- * M32700 Interrupt Control Unit (Level 1)
- */
-#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
-
-icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
-
-static void disable_m32700ut_irq(unsigned int irq)
-{
-	unsigned long port, data;
-
-	port = irq2port(irq);
-	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
-	outl(data, port);
-}
-
-static void enable_m32700ut_irq(unsigned int irq)
-{
-	unsigned long port, data;
-
-	port = irq2port(irq);
-	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
-	outl(data, port);
-}
-
-static void mask_m32700ut(struct irq_data *data)
-{
-	disable_m32700ut_irq(data->irq);
-}
-
-static void unmask_m32700ut(struct irq_data *data)
-{
-	enable_m32700ut_irq(data->irq);
-}
-
-static void shutdown_m32700ut(struct irq_data *data)
-{
-	unsigned long port;
-
-	port = irq2port(data->irq);
-	outl(M32R_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_irq_type =
-{
-	.name		= "M32700UT-IRQ",
-	.irq_shutdown	= shutdown_m32700ut,
-	.irq_mask	= mask_m32700ut,
-	.irq_unmask	= unmask_m32700ut
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT (Level 2)
- */
-#define irq2pldirq(x)		((x) - M32700UT_PLD_IRQ_BASE)
-#define pldirq2port(x)		(unsigned long)((int)PLD_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-typedef struct {
-	unsigned short icucr;  /* ICU Control Register */
-} pld_icu_data_t;
-
-static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
-
-static void disable_m32700ut_pld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(irq);
-	port = pldirq2port(pldirq);
-	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_pld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(irq);
-	port = pldirq2port(pldirq);
-	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_pld(struct irq_data *data)
-{
-	disable_m32700ut_pld_irq(data->irq);
-}
-
-static void unmask_m32700ut_pld(struct irq_data *data)
-{
-	enable_m32700ut_pld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT1);
-}
-
-static void shutdown_m32700ut_pld_irq(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(data->irq);
-	port = pldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_pld_irq_type =
-{
-	.name		= "M32700UT-PLD-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_pld_irq,
-	.irq_mask	= mask_m32700ut_pld,
-	.irq_unmask	= unmask_m32700ut_pld,
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2)
- */
-#define irq2lanpldirq(x)	((x) - M32700UT_LAN_PLD_IRQ_BASE)
-#define lanpldirq2port(x)	(unsigned long)((int)M32700UT_LAN_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ];
-
-static void disable_m32700ut_lanpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(irq);
-	port = lanpldirq2port(pldirq);
-	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_lanpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(irq);
-	port = lanpldirq2port(pldirq);
-	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_lanpld(struct irq_data *data)
-{
-	disable_m32700ut_lanpld_irq(data->irq);
-}
-
-static void unmask_m32700ut_lanpld(struct irq_data *data)
-{
-	enable_m32700ut_lanpld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT0);
-}
-
-static void shutdown_m32700ut_lanpld(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(data->irq);
-	port = lanpldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_lanpld_irq_type =
-{
-	.name		= "M32700UT-PLD-LAN-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_lanpld,
-	.irq_mask	= mask_m32700ut_lanpld,
-	.irq_unmask	= unmask_m32700ut_lanpld,
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2)
- */
-#define irq2lcdpldirq(x)	((x) - M32700UT_LCD_PLD_IRQ_BASE)
-#define lcdpldirq2port(x)	(unsigned long)((int)M32700UT_LCD_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ];
-
-static void disable_m32700ut_lcdpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(irq);
-	port = lcdpldirq2port(pldirq);
-	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_lcdpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(irq);
-	port = lcdpldirq2port(pldirq);
-	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_lcdpld(struct irq_data *data)
-{
-	disable_m32700ut_lcdpld_irq(data->irq);
-}
-
-static void unmask_m32700ut_lcdpld(struct irq_data *data)
-{
-	enable_m32700ut_lcdpld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT2);
-}
-
-static void shutdown_m32700ut_lcdpld(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(data->irq);
-	port = lcdpldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_lcdpld_irq_type =
-{
-	.name		= "M32700UT-PLD-LCD-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_lcdpld,
-	.irq_mask	= mask_m32700ut_lcdpld,
-	.irq_unmask	= unmask_m32700ut_lcdpld,
-};
-
-void __init init_IRQ(void)
-{
-#if defined(CONFIG_SMC91X)
-	/* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/
-	irq_set_chip_and_handler(M32700UT_LAN_IRQ_LAN,
-				 &m32700ut_lanpld_irq_type, handle_level_irq);
-	lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* "H" edge sense */
-	disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN);
-#endif  /* CONFIG_SMC91X */
-
-	/* MFT2 : system timer */
-	irq_set_chip_and_handler(M32R_IRQ_MFT2, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
-	disable_m32700ut_irq(M32R_IRQ_MFT2);
-
-	/* SIO0 : receive */
-	irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO0_R);
-
-	/* SIO0 : send */
-	irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO0_S);
-
-	/* SIO1 : receive */
-	irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO1_R);
-
-	/* SIO1 : send */
-	irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO1_S);
-
-	/* DMA1 : */
-	irq_set_chip_and_handler(M32R_IRQ_DMA1, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_DMA1].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_DMA1);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	/* INT#1: SIO0 Receive on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_SIO0_RCV, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
-	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV);
-
-	/* INT#1: SIO0 Send on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_SIO0_SND, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
-	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND);
-#endif  /* CONFIG_SERIAL_M32R_PLDSIO */
-
-	/* INT#1: CFC IREQ on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* 'L' level sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ);
-
-	/* INT#1: CFC Insert on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00;	/* 'L' edge sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT);
-
-	/* INT#1: CFC Eject on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* 'H' edge sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT);
-
-	/*
-	 * INT0# is used for LAN, DIO
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
-	enable_m32700ut_irq(M32R_IRQ_INT0);
-
-	/*
-	 * INT1# is used for UART, MMC, CF Controller in FPGA.
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
-	enable_m32700ut_irq(M32R_IRQ_INT1);
-
-#if defined(CONFIG_USB)
-	outw(USBCR_OTGS, USBCR); 	/* USBCR: non-OTG */
-	irq_set_chip_and_handler(M32700UT_LCD_IRQ_USB_INT1,
-				 &m32700ut_lcdpld_irq_type, handle_level_irq);
-
-	lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* "L" level sense */
-	disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1);
-#endif
-	/*
-	 * INT2# is used for BAT, USB, AUDIO
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
-	enable_m32700ut_irq(M32R_IRQ_INT2);
-
-#if defined(CONFIG_VIDEO_M32R_AR)
-	/*
-	 * INT3# is used for AR
-	 */
-	irq_set_chip_and_handler(M32R_IRQ_INT3, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
-	disable_m32700ut_irq(M32R_IRQ_INT3);
-#endif	/* CONFIG_VIDEO_M32R_AR */
-}
-
-#if defined(CONFIG_SMC91X)
-
-#define LAN_IOSTART     0x300
-#define LAN_IOEND       0x320
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = (LAN_IOSTART),
-		.end    = (LAN_IOEND),
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = M32700UT_LAN_IRQ_LAN,
-		.end    = M32700UT_LAN_IRQ_LAN,
-		.flags  = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_FB_S1D13XXX)
-
-#include <video/s1d13xxxfb.h>
-#include <asm/s1d13806.h>
-
-static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
-	.initregs		= s1d13xxxfb_initregs,
-	.initregssize		= ARRAY_SIZE(s1d13xxxfb_initregs),
-	.platform_init_video	= NULL,
-#ifdef CONFIG_PM
-	.platform_suspend_video	= NULL,
-	.platform_resume_video	= NULL,
-#endif
-};
-
-static struct resource s1d13xxxfb_resources[] = {
-	[0] = {
-		.start  = 0x10600000UL,
-		.end    = 0x1073FFFFUL,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 0x10400000UL,
-		.end    = 0x104001FFUL,
-		.flags  = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device s1d13xxxfb_device = {
-	.name		= S1D_DEVICENAME,
-	.id		= 0,
-	.dev            = {
-		.platform_data  = &s1d13xxxfb_data,
-	},
-	.num_resources  = ARRAY_SIZE(s1d13xxxfb_resources),
-	.resource       = s1d13xxxfb_resources,
-};
-#endif
-
-static int __init platform_init(void)
-{
-#if defined(CONFIG_SMC91X)
-	platform_device_register(&smc91x_device);
-#endif
-#if defined(CONFIG_FB_S1D13XXX)
-	platform_device_register(&s1d13xxxfb_device);
-#endif
-	return 0;
-}
-arch_initcall(platform_init);