init android origin source code

13 files changed, 683 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig b/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig
new file mode 100644
index 00000000..043f7b02
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig
@@ -0,0 +1,16 @@
+if PLAT_VERSATILE
+
+config PLAT_VERSATILE_CLCD
+	bool
+
+config PLAT_VERSATILE_FPGA_IRQ
+	bool
+
+config PLAT_VERSATILE_LEDS
+	def_bool y if LEDS_CLASS
+	depends on ARCH_REALVIEW || ARCH_VERSATILE
+
+config PLAT_VERSATILE_SCHED_CLOCK
+	def_bool y
+
+endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile b/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile
new file mode 100644
index 00000000..a5cb1945
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile
@@ -0,0 +1,6 @@
+obj-y	:= clock.o
+obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
+obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
+obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
+obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c b/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c
new file mode 100644
index 00000000..6628cc27
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c
@@ -0,0 +1,182 @@
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <plat/clcd.h>
+
+static struct clcd_panel vga = {
+	.mode		= {
+		.name		= "VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 39721,
+		.left_margin	= 40,
+		.right_margin	= 24,
+		.upper_margin	= 32,
+		.lower_margin	= 11,
+		.hsync_len	= 96,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+	.bpp		= 16,
+};
+
+static struct clcd_panel xvga = {
+	.mode		= {
+		.name		= "XVGA",
+		.refresh	= 60,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15748,
+		.left_margin	= 152,
+		.right_margin	= 48,
+		.upper_margin	= 23,
+		.lower_margin	= 3,
+		.hsync_len	= 104,
+		.vsync_len	= 4,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+	.bpp		= 16,
+};
+
+/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */
+static struct clcd_panel sanyo_tm38qv67a02a = {
+	.mode		= {
+		.name		= "Sanyo TM38QV67A02A",
+		.refresh	= 116,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 100000,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 5,
+		.lower_margin	= 5,
+		.hsync_len	= 6,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.bpp		= 16,
+};
+
+static struct clcd_panel sanyo_2_5_in = {
+	.mode		= {
+		.name		= "Sanyo QVGA Portrait",
+		.refresh	= 116,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 100000,
+		.left_margin	= 20,
+		.right_margin	= 10,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 10,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.bpp		= 16,
+};
+
+/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */
+static struct clcd_panel epson_l2f50113t00 = {
+	.mode		= {
+		.name		= "Epson L2F50113T00",
+		.refresh	= 390,
+		.xres		= 176,
+		.yres		= 220,
+		.pixclock	= 62500,
+		.left_margin	= 3,
+		.right_margin	= 2,
+		.upper_margin	= 1,
+		.lower_margin	= 0,
+		.hsync_len	= 3,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.caps		= CLCD_CAP_5551,
+	.bpp		= 16,
+};
+
+static struct clcd_panel *panels[] = {
+	&vga,
+	&xvga,
+	&sanyo_tm38qv67a02a,
+	&sanyo_2_5_in,
+	&epson_l2f50113t00,
+};
+
+struct clcd_panel *versatile_clcd_get_panel(const char *name)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(panels); i++)
+		if (strcmp(panels[i]->mode.name, name) == 0)
+			break;
+
+	if (i < ARRAY_SIZE(panels))
+		return panels[i];
+
+	pr_err("CLCD: couldn't get parameters for panel %s\n", name);
+
+	return NULL;
+}
+
+int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
+{
+	dma_addr_t dma;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+						    &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		pr_err("CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start	= dma;
+	fb->fb.fix.smem_len	= framesize;
+
+	return 0;
+}
+
+int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+				     fb->fb.screen_base,
+				     fb->fb.fix.smem_start,
+				     fb->fb.fix.smem_len);
+}
+
+void versatile_clcd_remove_dma(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+			      fb->fb.screen_base, fb->fb.fix.smem_start);
+}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c b/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c
new file mode 100644
index 00000000..5c8b6564
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/plat-versatile/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/hardware/icst.h>
+
+#include <mach/clkdev.h>
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	long ret = -EIO;
+	if (clk->ops && clk->ops->round)
+		ret = clk->ops->round(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+	if (clk->ops && clk->ops->set)
+		ret = clk->ops->set(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+long icst_clk_round(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+	vco = icst_hz_to_vco(clk->params, rate);
+	return icst_hz(clk->params, vco);
+}
+EXPORT_SYMBOL(icst_clk_round);
+
+int icst_clk_set(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(clk->params, rate);
+	clk->rate = icst_hz(clk->params, vco);
+	clk->ops->setvco(clk, vco);
+
+	return 0;
+}
+EXPORT_SYMBOL(icst_clk_set);
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c b/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c
new file mode 100644
index 00000000..f0cc8e19
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c
@@ -0,0 +1,72 @@
+/*
+ *  Support for Versatile FPGA-based IRQ controllers
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+#include <plat/fpga-irq.h>
+
+#define IRQ_STATUS		0x00
+#define IRQ_RAW_STATUS		0x04
+#define IRQ_ENABLE_SET		0x08
+#define IRQ_ENABLE_CLEAR	0x0c
+
+static void fpga_irq_mask(struct irq_data *d)
+{
+	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - f->irq_start);
+
+	writel(mask, f->base + IRQ_ENABLE_CLEAR);
+}
+
+static void fpga_irq_unmask(struct irq_data *d)
+{
+	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << (d->irq - f->irq_start);
+
+	writel(mask, f->base + IRQ_ENABLE_SET);
+}
+
+static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc)
+{
+	struct fpga_irq_data *f = irq_desc_get_handler_data(desc);
+	u32 status = readl(f->base + IRQ_STATUS);
+
+	if (status == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	do {
+		irq = ffs(status) - 1;
+		status &= ~(1 << irq);
+
+		generic_handle_irq(irq + f->irq_start);
+	} while (status);
+}
+
+void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f)
+{
+	unsigned int i;
+
+	f->chip.irq_ack = fpga_irq_mask;
+	f->chip.irq_mask = fpga_irq_mask;
+	f->chip.irq_unmask = fpga_irq_unmask;
+
+	if (parent_irq != -1) {
+		irq_set_handler_data(parent_irq, f);
+		irq_set_chained_handler(parent_irq, fpga_irq_handle);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (valid & (1 << i)) {
+			unsigned int irq = f->irq_start + i;
+
+			irq_set_chip_data(irq, f);
+			irq_set_chip_and_handler(irq, &f->chip,
+						 handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S b/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S
new file mode 100644
index 00000000..dd703ef0
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S
@@ -0,0 +1,41 @@
+/*
+ *  linux/arch/arm/plat-versatile/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Realview/Versatile Express specific entry point for secondary CPUs.
+ * This provides a "holding pen" into which all secondary cores are held
+ * until we're ready for them to initialise.
+ */
+ENTRY(versatile_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+	.align
+1:	.long	.
+	.long	pen_release
+ENDPROC(versatile_secondary_startup)
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h
new file mode 100644
index 00000000..6bb6a1d2
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h
@@ -0,0 +1,9 @@
+#ifndef PLAT_CLCD_H
+#define PLAT_CLCD_H
+
+struct clcd_panel *versatile_clcd_get_panel(const char *);
+int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
+int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
+void versatile_clcd_remove_dma(struct clcd_fb *);
+
+#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h
new file mode 100644
index 00000000..3cfb024c
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h
@@ -0,0 +1,15 @@
+#ifndef PLAT_CLOCK_H
+#define PLAT_CLOCK_H
+
+#include <asm/hardware/icst.h>
+
+struct clk_ops {
+	long	(*round)(struct clk *, unsigned long);
+	int	(*set)(struct clk *, unsigned long);
+	void	(*setvco)(struct clk *, struct icst_vco);
+};
+
+int icst_clk_set(struct clk *, unsigned long);
+long icst_clk_round(struct clk *, unsigned long);
+
+#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h
new file mode 100644
index 00000000..627fafd1
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h
@@ -0,0 +1,12 @@
+#ifndef PLAT_FPGA_IRQ_H
+#define PLAT_FPGA_IRQ_H
+
+struct fpga_irq_data {
+	void __iomem *base;
+	unsigned int irq_start;
+	struct irq_chip chip;
+};
+
+void fpga_irq_init(int, u32, struct fpga_irq_data *);
+
+#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h
new file mode 100644
index 00000000..5c3e4fc9
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h
@@ -0,0 +1,6 @@
+#ifndef ARM_PLAT_SCHED_CLOCK_H
+#define ARM_PLAT_SCHED_CLOCK_H
+
+void versatile_sched_clock_init(void __iomem *, unsigned long);
+
+#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c b/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c
new file mode 100644
index 00000000..3169fa55
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c
@@ -0,0 +1,103 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+#endif
+
+struct versatile_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} versatile_leds[] = {
+	{ "versatile:0", "heartbeat", },
+	{ "versatile:1", "mmc0", },
+	{ "versatile:2", },
+	{ "versatile:3", },
+	{ "versatile:4", },
+	{ "versatile:5", },
+	{ "versatile:6", },
+	{ "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+	writel(reg, LEDREG);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init versatile_leds_init(void)
+{
+	int i;
+
+	/* All ON */
+	writel(0xff, LEDREG);
+	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+		struct versatile_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = versatile_leds[i].name;
+		led->cdev.brightness_set = versatile_led_set;
+		led->cdev.brightness_get = versatile_led_get;
+		led->cdev.default_trigger = versatile_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(versatile_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c b/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c
new file mode 100644
index 00000000..49c7db48
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c
@@ -0,0 +1,106 @@
+/*
+ *  linux/arch/arm/plat-versatile/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/hardware/gic.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void __cpuinit write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	write_pen_release(-1);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * This is really belt and braces; we hold unintended secondary
+	 * CPUs in the holding pen until we're ready for them.  However,
+	 * since we haven't sent them a soft interrupt, they shouldn't
+	 * be there.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	gic_raise_softirq(cpumask_of(cpu), 1);
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c b/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c
new file mode 100644
index 00000000..b33b74c8
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c
@@ -0,0 +1,41 @@
+/*
+ *  linux/arch/arm/plat-versatile/sched-clock.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <asm/sched_clock.h>
+#include <plat/sched_clock.h>
+
+static void __iomem *ctr;
+
+static u32 notrace versatile_read_sched_clock(void)
+{
+	if (ctr)
+		return readl(ctr);
+
+	return 0;
+}
+
+void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
+{
+	ctr = reg;
+	setup_sched_clock(versatile_read_sched_clock, 32, rate);
+}