Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

117 files changed, 0 insertions, 14724 deletions

diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig b/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig
deleted file mode 100644
index a0ffc77d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig
+++ /dev/null
@@ -1,369 +0,0 @@
-# arch/arm/plat-samsung/Kconfig
-#
-# Copyright 2009 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_SAMSUNG
-	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
-	select NO_IOPORT
-	select GENERIC_IRQ_CHIP
-	default y
-	help
-	  Base platform code for all Samsung SoC based systems
-
-if PLAT_SAMSUNG
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# clock options
-
-config SAMSUNG_CLKSRC
-	bool
-	help
-	  Select the clock code for the clksrc implementation
-	  used by newer systems such as the S3C64XX.
-
-# options for IRQ support
-
-config SAMSUNG_IRQ_VIC_TIMER
-       bool
-       help
-         Internal configuration to build the VIC timer interrupt code.
-
-# options for gpio configuration support
-
-config SAMSUNG_GPIOLIB_4BIT
-	bool
-	help
-	  GPIOlib file contains the 4 bit modification functions for gpio
-	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
-	  series of processors.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_DRVSTR
-	bool
-	help
-	  Internal configuration to get and set correct GPIO driver strength
-	  helper
-
-config SAMSUNG_GPIO_EXTRA
-	int "Number of additional GPIO pins"
-	default 128 if SAMSUNG_GPIO_EXTRA128
-	default 64 if SAMSUNG_GPIO_EXTRA64
-	default 0
-	help
-	  Use additional GPIO space in addition to the GPIO's the SOC
-	  provides. This allows expanding the GPIO space for use with
-	  GPIO expanders.
-
-config SAMSUNG_GPIO_EXTRA64
-	bool
-
-config SAMSUNG_GPIO_EXTRA128
-	bool
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-# ADC driver
-
-config S3C_ADC
-	bool "ADC common driver support"
-	help
-	  Core support for the ADC block found in the Samsung SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_HSMMC3
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 3
-
-config S3C_DEV_HWMON
-	bool
-	help
-	    Compile in platform device definitions for HWMON
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_I2C2
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
-	bool
-	help
-	  Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
-	bool
-	help
-	  Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
-	bool
-	help
-	  Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
-	bool
-	help
-	  Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
-	bool
-	help
-	  Compile in platform device definition for I2C controller 7
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_WDT
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Complie in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
-	bool
-	help
-	  Complie in platform device definition for RTC
-
-config SAMSUNG_DEV_ADC
-	bool
-	help
-	  Compile in platform device definition for ADC controller
-
-config SAMSUNG_DEV_IDE
-	bool
-	help
-	  Compile in platform device definitions for IDE
-
-config S3C64XX_DEV_SPI0
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 0
-
-config S3C64XX_DEV_SPI1
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 1
-
-config S3C64XX_DEV_SPI2
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 2
-
-config SAMSUNG_DEV_TS
-	bool
-	help
-	    Common in platform device definitions for touchscreen device
-
-config SAMSUNG_DEV_KEYPAD
-	bool
-	help
-	  Compile in platform device definitions for keypad
-
-config SAMSUNG_DEV_PWM
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Compile in platform device definition for PWM Timer
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
-config S3C24XX_PWM
-	bool "PWM device support"
-	select HAVE_PWM
-	help
-	  Support for exporting the PWM timer blocks via the pwm device
-	  system
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-config SAMSUNG_DMADEV
-	bool
-	select DMADEVICES
-	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
-					CPU_S5P6450 || CPU_S5P6440)
-	select ARM_AMBA
-	help
-	  Use DMA device engine for PL330 DMAC.
-
-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	select DEBUG_LL
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
-	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && SAMSUNG_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config SAMSUNG_WAKEMASK
-	bool
-	depends on PM
-	help
-	  Compile support for wakeup-mask controls found on the S3C6400
-	  and above. This code allows a set of interrupt to wakeup-mask
-	  mappings. See <plat/wakeup-mask.h>
-
-comment "Power Domain"
-
-config SAMSUNG_PD
-	bool "Samsung Power Domain"
-	depends on PM_RUNTIME
-	help
-	  Say Y here if you want to control Power Domain by Runtime PM.
-
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int
-	default "0" if DEBUG_S3C_UART0
-	default "1" if DEBUG_S3C_UART1
-	default "2" if DEBUG_S3C_UART2
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile b/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile
deleted file mode 100644
index 6012366f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-# arch/arm/plat-samsung/Makefile
-#
-# Copyright 2009 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Objects we always build independent of SoC choice
-
-obj-y				+= init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-
-obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
-
-obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
-
-# ADC
-
-obj-$(CONFIG_S3C_ADC)	+= adc.o
-
-# devices
-
-obj-y				+= platformdata.o
-
-obj-y				+= devs.o
-obj-y				+= dev-uart.o
-
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
-
-obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
-
-obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
-
-# PD support
-
-obj-$(CONFIG_SAMSUNG_PD)	+= pd.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c b/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c
deleted file mode 100644
index 33ecd0c9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/* arch/arm/plat-samsung/adc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * Samsung ADC device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/regulator/consumer.h>
-
-#include <plat/regs-adc.h>
-#include <plat/adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-enum s3c_cpu_type {
-	TYPE_ADCV1, /* S3C24XX */
-	TYPE_ADCV11, /* S3C2443 */
-	TYPE_ADCV12, /* S3C2416, S3C2450 */
-	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
-	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
-};
-
-struct s3c_adc_client {
-	struct platform_device	*pdev;
-	struct list_head	 pend;
-	wait_queue_head_t	*wait;
-
-	unsigned int		 nr_samples;
-	int			 result;
-	unsigned char		 is_ts;
-	unsigned char		 channel;
-
-	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
-	void	(*convert_cb)(struct s3c_adc_client *c,
-			      unsigned val1, unsigned val2,
-			      unsigned *samples_left);
-};
-
-struct adc_device {
-	struct platform_device	*pdev;
-	struct platform_device	*owner;
-	struct clk		*clk;
-	struct s3c_adc_client	*cur;
-	struct s3c_adc_client	*ts_pend;
-	void __iomem		*regs;
-	spinlock_t		 lock;
-
-	unsigned int		 prescale;
-
-	int			 irq;
-	struct regulator	*vdd;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	con |= S3C2410_ADCCON_ENABLE_START;
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
-				  struct s3c_adc_client *client)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-
-	client->select_cb(client, 1);
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
-		con &= ~S3C2410_ADCCON_MUXMASK;
-	con &= ~S3C2410_ADCCON_STDBM;
-	con &= ~S3C2410_ADCCON_STARTMASK;
-
-	if (!client->is_ts) {
-		if (cpu == TYPE_ADCV3)
-			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
-		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
-			writel(client->channel & 0xf,
-						adc->regs + S3C2443_ADCMUX);
-		else
-			con |= S3C2410_ADCCON_SELMUX(client->channel);
-	}
-
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
-	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
-		readl(adc->regs + S3C2410_ADCCON),
-		readl(adc->regs + S3C2410_ADCTSC),
-		readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
-	struct s3c_adc_client *next = adc->ts_pend;
-
-	if (!next && !list_empty(&adc_pending)) {
-		next = list_first_entry(&adc_pending,
-					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
-
-	if (next) {
-		adc_dbg(adc, "new client is %p\n", next);
-		adc->cur = next;
-		s3c_adc_select(adc, next);
-		s3c_adc_convert(adc);
-		s3c_adc_dbgshow(adc);
-	}
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
-		  unsigned int channel, unsigned int nr_samples)
-{
-	struct adc_device *adc = adc_dev;
-	unsigned long flags;
-
-	if (!adc) {
-		printk(KERN_ERR "%s: failed to find adc\n", __func__);
-		return -EINVAL;
-	}
-
-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	client->channel = channel;
-	client->nr_samples = nr_samples;
-
-	if (client->is_ts)
-		adc->ts_pend = client;
-	else
-		list_add_tail(&client->pend, &adc_pending);
-
-	if (!adc->cur)
-		s3c_adc_try(adc);
-
-	spin_unlock_irqrestore(&adc->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
-			     unsigned v, unsigned u, unsigned *left)
-{
-	client->result = v;
-	wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
-	int ret;
-
-	client->convert_cb = s3c_convert_done;
-	client->wait = &wake;
-	client->result = -1;
-
-	ret = s3c_adc_start(client, ch, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
-	if (client->result < 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	client->convert_cb = NULL;
-	return client->result;
-
-err:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
-				   unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(struct s3c_adc_client *client,
-						       unsigned int selected),
-					void (*conv)(struct s3c_adc_client *client,
-						     unsigned d0, unsigned d1,
-						     unsigned *samples_left),
-					unsigned int is_ts)
-{
-	struct s3c_adc_client *client;
-
-	WARN_ON(!pdev);
-
-	if (!select)
-		select = s3c_adc_default_select;
-
-	if (!pdev)
-		return ERR_PTR(-EINVAL);
-
-	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
-	if (!client) {
-		dev_err(&pdev->dev, "no memory for adc client\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	client->pdev = pdev;
-	client->is_ts = is_ts;
-	client->select_cb = select;
-	client->convert_cb = conv;
-
-	return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&adc_dev->lock, flags);
-
-	/* We should really check that nothing is in progress. */
-	if (adc_dev->cur == client)
-		adc_dev->cur = NULL;
-	if (adc_dev->ts_pend == client)
-		adc_dev->ts_pend = NULL;
-	else {
-		struct list_head *p, *n;
-		struct s3c_adc_client *tmp;
-
-		list_for_each_safe(p, n, &adc_pending) {
-			tmp = list_entry(p, struct s3c_adc_client, pend);
-			if (tmp == client)
-				list_del(&tmp->pend);
-		}
-	}
-
-	if (adc_dev->cur == NULL)
-		s3c_adc_try(adc_dev);
-
-	spin_unlock_irqrestore(&adc_dev->lock, flags);
-	kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
-	struct adc_device *adc = pw;
-	struct s3c_adc_client *client = adc->cur;
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-	unsigned data0, data1;
-
-	if (!client) {
-		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		goto exit;
-	}
-
-	data0 = readl(adc->regs + S3C2410_ADCDAT0);
-	data1 = readl(adc->regs + S3C2410_ADCDAT1);
-	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
-	client->nr_samples--;
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
-		data0 &= 0x3ff;
-		data1 &= 0x3ff;
-	} else {
-		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	}
-
-	if (client->convert_cb)
-		(client->convert_cb)(client, data0, data1, &client->nr_samples);
-
-	if (client->nr_samples > 0) {
-		/* fire another conversion for this */
-
-		client->select_cb(client, 1);
-		s3c_adc_convert(adc);
-	} else {
-		spin_lock(&adc->lock);
-		(client->select_cb)(client, 0);
-		adc->cur = NULL;
-
-		s3c_adc_try(adc);
-		spin_unlock(&adc->lock);
-	}
-
-exit:
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
-		/* Clear ADC interrupt */
-		writel(0, adc->regs + S3C64XX_ADCCLRINT);
-	}
-	return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adc_device *adc;
-	struct resource *regs;
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned tmp;
-
-	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
-	if (adc == NULL) {
-		dev_err(dev, "failed to allocate adc_device\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&adc->lock);
-
-	adc->pdev = pdev;
-	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
-	adc->vdd = regulator_get(dev, "vdd");
-	if (IS_ERR(adc->vdd)) {
-		dev_err(dev, "operating without regulator \"vdd\" .\n");
-		ret = PTR_ERR(adc->vdd);
-		goto err_alloc;
-	}
-
-	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0) {
-		dev_err(dev, "failed to get adc irq\n");
-		ret = -ENOENT;
-		goto err_reg;
-	}
-
-	ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
-	if (ret < 0) {
-		dev_err(dev, "failed to attach adc irq\n");
-		goto err_reg;
-	}
-
-	adc->clk = clk_get(dev, "adc");
-	if (IS_ERR(adc->clk)) {
-		dev_err(dev, "failed to get adc clock\n");
-		ret = PTR_ERR(adc->clk);
-		goto err_irq;
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(dev, "failed to find registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	adc->regs = ioremap(regs->start, resource_size(regs));
-	if (!adc->regs) {
-		dev_err(dev, "failed to map registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		goto err_ioremap;
-
-	clk_enable(adc->clk);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	dev_info(dev, "attached adc driver\n");
-
-	platform_set_drvdata(pdev, adc);
-	adc_dev = adc;
-
-	return 0;
-
- err_ioremap:
-	iounmap(adc->regs);
- err_clk:
-	clk_put(adc->clk);
-
- err_irq:
-	free_irq(adc->irq, adc);
- err_reg:
-	regulator_put(adc->vdd);
- err_alloc:
-	kfree(adc);
-	return ret;
-}
-
-static int __devexit s3c_adc_remove(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	iounmap(adc->regs);
-	free_irq(adc->irq, adc);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-	regulator_put(adc->vdd);
-	clk_put(adc->clk);
-	kfree(adc);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct device *dev)
-{
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	unsigned long flags;
-	u32 con;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	con = readl(adc->regs + S3C2410_ADCCON);
-	con |= S3C2410_ADCCON_STDBM;
-	writel(con, adc->regs + S3C2410_ADCCON);
-
-	disable_irq(adc->irq);
-	spin_unlock_irqrestore(&adc->lock, flags);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-static int s3c_adc_resume(struct device *dev)
-{
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned long tmp;
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-	clk_enable(adc->clk);
-	enable_irq(adc->irq);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static struct platform_device_id s3c_adc_driver_ids[] = {
-	{
-		.name           = "s3c24xx-adc",
-		.driver_data    = TYPE_ADCV1,
-	}, {
-		.name		= "s3c2443-adc",
-		.driver_data	= TYPE_ADCV11,
-	}, {
-		.name		= "s3c2416-adc",
-		.driver_data	= TYPE_ADCV12,
-	}, {
-		.name           = "s3c64xx-adc",
-		.driver_data    = TYPE_ADCV2,
-	}, {
-		.name		= "samsung-adc-v3",
-		.driver_data	= TYPE_ADCV3,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
-
-static const struct dev_pm_ops adc_pm_ops = {
-	.suspend	= s3c_adc_suspend,
-	.resume		= s3c_adc_resume,
-};
-
-static struct platform_driver s3c_adc_driver = {
-	.id_table	= s3c_adc_driver_ids,
-	.driver		= {
-		.name	= "s3c-adc",
-		.owner	= THIS_MODULE,
-		.pm	= &adc_pm_ops,
-	},
-	.probe		= s3c_adc_probe,
-	.remove		= __devexit_p(s3c_adc_remove),
-};
-
-static int __init adc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&s3c_adc_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
-	return ret;
-}
-
-module_init(adc_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c b/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c
deleted file mode 100644
index 786a4107..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/plat-samsung/clock-clksrc.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu-freq.h>
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static inline u32 bit_mask(u32 shift, u32 nr_bits)
-{
-	u32 mask = 0xffffffff >> (32 - nr_bits);
-
-	return mask << shift;
-}
-
-static unsigned long s3c_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
-	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
-
-	clkdiv &= mask;
-	clkdiv >>= sclk->reg_div.shift;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_div.reg;
-	unsigned int div;
-	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > (1 << sclk->reg_div.size))
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~mask;
-	val |= (div - 1) << sclk->reg_div.shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clksrc_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(sclk->reg_src.reg);
-	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clk->parent = parent;
-
-		clksrc &= ~mask;
-		clksrc |= src_nr << sclk->reg_src.shift;
-
-		__raw_writel(clksrc, sclk->reg_src.reg);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int max_div = 1 << sclk->reg_div.size;
-	int div;
-
-	if (rate >= parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-		if (parent_rate % rate)
-			div++;
-
-		if (div == 0)
-			div = 1;
-		if (div > max_div)
-			div = max_div;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-/* Clock initialisation code */
-
-void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
-{
-	struct clksrc_sources *srcs = clk->sources;
-	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
-	u32 clksrc;
-
-	if (!clk->reg_src.reg) {
-		if (!clk->clk.parent)
-			printk(KERN_ERR "%s: no parent clock specified\n",
-				clk->clk.name);
-		return;
-	}
-
-	clksrc = __raw_readl(clk->reg_src.reg);
-	clksrc &= mask;
-	clksrc >>= clk->reg_src.shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	if (announce)
-		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-		       clk->clk.name, clk->clk.parent->name, clksrc,
-		       clk_get_rate(&clk->clk));
-}
-
-static struct clk_ops clksrc_ops = {
-	.set_parent	= s3c_setparent_clksrc,
-	.get_rate	= s3c_getrate_clksrc,
-	.set_rate	= s3c_setrate_clksrc,
-	.round_rate	= s3c_roundrate_clksrc,
-};
-
-static struct clk_ops clksrc_ops_nodiv = {
-	.set_parent	= s3c_setparent_clksrc,
-};
-
-static struct clk_ops clksrc_ops_nosrc = {
-	.get_rate	= s3c_getrate_clksrc,
-	.set_rate	= s3c_setrate_clksrc,
-	.round_rate	= s3c_roundrate_clksrc,
-};
-
-void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
-{
-	int ret;
-
-	for (; size > 0; size--, clksrc++) {
-		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
-			printk(KERN_ERR "%s: clock %s has no registers set\n",
-			       __func__, clksrc->clk.name);
-
-		/* fill in the default functions */
-
-		if (!clksrc->clk.ops) {
-			if (!clksrc->reg_div.reg)
-				clksrc->clk.ops = &clksrc_ops_nodiv;
-			else if (!clksrc->reg_src.reg)
-				clksrc->clk.ops = &clksrc_ops_nosrc;
-			else
-				clksrc->clk.ops = &clksrc_ops;
-		}
-
-		/* setup the clocksource, but do not announce it
-		 * as it may be re-set by the setup routines
-		 * called after the rest of the clocks have been
-		 * registered
-		 */
-		s3c_set_clksrc(clksrc, false);
-
-		ret = s3c24xx_register_clock(&clksrc->clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "%s: failed to register %s (%d)\n",
-			       __func__, clksrc->clk.name, ret);
-		}
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c b/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c
deleted file mode 100644
index 65c5eca4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#if defined(CONFIG_DEBUG_FS)
-#include <linux/debugfs.h>
-#endif
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-/* We originally used an mutex here, but some contexts (see resume)
- * are calling functions such as clk_set_parent() with IRQs disabled
- * causing an BUG to be triggered.
- */
-DEFINE_SPINLOCK(clocks_lock);
-
-/* Global watchdog clock used by arch_wtd_reset() callback */
-struct clk *s3c2410_wdtclk;
-static int __init s3c_wdt_reset_init(void)
-{
-	s3c2410_wdtclk = clk_get(NULL, "watchdog");
-	if (IS_ERR(s3c2410_wdtclk))
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-	return 0;
-}
-arch_initcall(s3c_wdt_reset_init);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->ops != NULL && clk->ops->get_rate != NULL)
-		return (clk->ops->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
-		return (clk->ops->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	/* We do not default just do a clk->rate = rate as
-	 * the clock may have been made this way by choice.
-	 */
-
-	WARN_ON(clk->ops == NULL);
-	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
-
-	if (clk->ops == NULL || clk->ops->set_rate == NULL)
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-	ret = (clk->ops->set_rate)(clk, rate);
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-
-	if (clk->ops && clk->ops->set_parent)
-		ret = (clk->ops->set_parent)(clk, parent);
-
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-struct clk_ops clk_ops_def_setrate = {
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_ext = {
-	.name		= "ext",
-};
-
-struct clk clk_epll = {
-	.name		= "epll",
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-};
-
-/* initialise the clock system */
-
-/**
- * s3c24xx_register_clock() - register a clock
- * @clk: The clock to register
- *
- * Add the specified clock to the list of clocks known by the system.
- */
-int s3c24xx_register_clock(struct clk *clk)
-{
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* fill up the clk_lookup structure and register it*/
-	clk->lookup.dev_id = clk->devname;
-	clk->lookup.con_id = clk->name;
-	clk->lookup.clk = clk;
-	clkdev_add(&clk->lookup);
-
-	return 0;
-}
-
-/**
- * s3c24xx_register_clocks() - register an array of clock pointers
- * @clks: Pointer to an array of struct clk pointers
- * @nr_clks: The number of clocks in the @clks array.
- *
- * Call s3c24xx_register_clock() for all the clock pointers contained
- * in the @clks list. Returns the number of failures.
- */
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-	int fails = 0;
-
-	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0) {
-			struct clk *clk = *clks;
-			printk(KERN_ERR "%s: failed to register %p: %s\n",
-			       __func__, clk, clk->name);
-			fails++;
-		}
-	}
-
-	return fails;
-}
-
-/**
- * s3c_register_clocks() - register an array of clocks
- * @clkp: Pointer to the first clock in the array.
- * @nr_clks: Number of clocks to register.
- *
- * Call s3c24xx_register_clock() on the @clkp array given, printing an
- * error if it fails to register the clock (unlikely).
- */
-void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
-{
-	int ret;
-
-	for (; nr_clks > 0; nr_clks--, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
-
-/**
- * s3c_disable_clocks() - disable an array of clocks
- * @clkp: Pointer to the first clock in the array.
- * @nr_clks: Number of clocks to register.
- *
- * for internal use only at initialisation time. disable the clocks in the
- * @clkp array.
- */
-
-void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
-{
-	for (; nr_clks > 0; nr_clks--, clkp++)
-		(clkp->enable)(clkp, 0);
-}
-
-/* initialise all the clocks */
-
-int __init s3c24xx_register_baseclocks(unsigned long xtal)
-{
-	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
-
-	clk_xtal.rate = xtal;
-
-	/* register our clocks */
-
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
-
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
-
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
-
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
-
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
-
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
-
-	return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/* debugfs support to trace clock tree hierarchy and attributes */
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-	char s[255];
-	char *p = s;
-
-	p += sprintf(p, "%s", c->devname);
-
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-
-	c->dent = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usage);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, list) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c b/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c
deleted file mode 100644
index 46b426e8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/plat-samsung/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-
-unsigned long samsung_cpu_id;
-static unsigned int samsung_cpu_rev;
-
-unsigned int samsung_rev(void)
-{
-	return samsung_cpu_rev;
-}
-EXPORT_SYMBOL(samsung_rev);
-
-void __init s3c24xx_init_cpu(void)
-{
-	/* nothing here yet */
-
-	samsung_cpu_rev = 0;
-}
-
-void __init s3c64xx_init_cpu(void)
-{
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!samsung_cpu_id) {
-		/*
-		 * S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read.
-		 */
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	samsung_cpu_rev = 0;
-}
-
-void __init s5p_init_cpu(void __iomem *cpuid_addr)
-{
-	samsung_cpu_id = __raw_readl(cpuid_addr);
-	samsung_cpu_rev = samsung_cpu_id & 0xFF;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c
deleted file mode 100644
index 5f197dca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-backlight.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Common infrastructure for PWM Backlight for Samsung boards
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/pwm_backlight.h>
-
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-static int samsung_bl_init(struct device *dev)
-{
-	int ret = 0;
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
-
-	ret = gpio_request(bl_gpio_info->no, "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with specific GPIO function for PWM timer */
-	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
-
-	return 0;
-}
-
-static void samsung_bl_exit(struct device *dev)
-{
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
-
-	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
-	gpio_free(bl_gpio_info->no);
-}
-
-/* Initialize few important fields of platform_pwm_backlight_data
- * structure with default values. These fields can be overridden by
- * board-specific values sent from machine file.
- * For ease of operation, these fields are initialized with values
- * used by most samsung boards.
- * Users has the option of sending info about other parameters
- * for their specific boards
- */
-
-static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns  = 78770,
-	.init           = samsung_bl_init,
-	.exit           = samsung_bl_exit,
-};
-
-static struct platform_device samsung_dfl_bl_device __initdata = {
-	.name		= "pwm-backlight",
-};
-
-/* samsung_bl_set - Set board specific data (if any) provided by user for
- * PWM Backlight control and register specific PWM and backlight device.
- * @gpio_info:	structure containing GPIO info for PWM timer
- * @bl_data:	structure containing Backlight control data
- */
-void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data)
-{
-	int ret = 0;
-	struct platform_device *samsung_bl_device;
-	struct platform_pwm_backlight_data *samsung_bl_data;
-
-	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
-			sizeof(struct platform_device), GFP_KERNEL);
-	if (!samsung_bl_device) {
-		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
-		return;
-	}
-
-	samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
-		sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
-	if (!samsung_bl_data) {
-		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
-		goto err_data;
-	}
-
-	/* Copy board specific data provided by user */
-	samsung_bl_data->pwm_id = bl_data->pwm_id;
-	samsung_bl_device->dev.parent =
-			&s3c_device_timer[samsung_bl_data->pwm_id].dev;
-
-	if (bl_data->max_brightness)
-		samsung_bl_data->max_brightness = bl_data->max_brightness;
-	if (bl_data->dft_brightness)
-		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
-	if (bl_data->lth_brightness)
-		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->pwm_period_ns)
-		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
-	if (bl_data->init)
-		samsung_bl_data->init = bl_data->init;
-	if (bl_data->notify)
-		samsung_bl_data->notify = bl_data->notify;
-	if (bl_data->notify_after)
-		samsung_bl_data->notify_after = bl_data->notify_after;
-	if (bl_data->exit)
-		samsung_bl_data->exit = bl_data->exit;
-	if (bl_data->check_fb)
-		samsung_bl_data->check_fb = bl_data->check_fb;
-
-	/* Keep the GPIO info for future use */
-	s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
-
-	/* Register the specific PWM timer dev for Backlight control */
-	ret = platform_device_register(
-			&s3c_device_timer[samsung_bl_data->pwm_id]);
-	if (ret) {
-		printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
-		goto err_plat_reg1;
-	}
-
-	/* Register the Backlight dev */
-	ret = platform_device_register(samsung_bl_device);
-	if (ret) {
-		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
-		goto err_plat_reg2;
-	}
-
-	return;
-
-err_plat_reg2:
-	platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
-err_plat_reg1:
-	kfree(samsung_bl_data);
-err_data:
-	kfree(samsung_bl_device);
-	return;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c
deleted file mode 100644
index 59281054..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-uart.c
- *	originally from arch/arm/plat-s3c24xx/devs.c
- *x
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c b/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c
deleted file mode 100644
index 8b928f9b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c
+++ /dev/null
@@ -1,1642 +0,0 @@
-/* linux/arch/arm/plat-samsung/devs.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Base SAMSUNG platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/ioport.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include <asm/irq.h>
-#include <asm/pmu.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
-#include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
-#include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/udc-hs.h>
-#include <plat/usb-control.h>
-#include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
-
-static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
-
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-	[2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
-	[3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
-	[4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
-};
-
-struct platform_device s3c_device_ac97 = {
-	.name		= "samsung-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
-	.resource	= s3c_ac97_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "s3c24xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "samsung-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_CAM),
-};
-
-struct platform_device s3c_device_camif = {
-	.name		= "s3c2440-camif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
-	.resource	= s3c_camif_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ASOC DMA */
-
-struct platform_device samsung_asoc_dma = {
-	.name		= "samsung-audio",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-struct platform_device samsung_asoc_idma = {
-	.name		= "samsung-idma",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-/* FB */
-
-#ifdef CONFIG_S3C_DEV_FB
-static struct resource s3c_fb_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
-};
-
-struct platform_device s3c_device_fb = {
-	.name		= "s3c-fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_fb_resource),
-	.resource	= s3c_fb_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s3c_device_fb);
-}
-#endif /* CONFIG_S3C_DEV_FB */
-
-/* FIMC */
-
-#ifdef CONFIG_S5P_DEV_FIMC0
-static struct resource s5p_fimc0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC0),
-};
-
-struct platform_device s5p_device_fimc0 = {
-	.name		= "s5p-fimc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
-	.resource	= s5p_fimc0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_fimc_md = {
-	.name	= "s5p-fimc-md",
-	.id	= -1,
-};
-#endif /* CONFIG_S5P_DEV_FIMC0 */
-
-#ifdef CONFIG_S5P_DEV_FIMC1
-static struct resource s5p_fimc1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC1),
-};
-
-struct platform_device s5p_device_fimc1 = {
-	.name		= "s5p-fimc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
-	.resource	= s5p_fimc1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC1 */
-
-#ifdef CONFIG_S5P_DEV_FIMC2
-static struct resource s5p_fimc2_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC2),
-};
-
-struct platform_device s5p_device_fimc2 = {
-	.name		= "s5p-fimc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
-	.resource	= s5p_fimc2_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC2 */
-
-#ifdef CONFIG_S5P_DEV_FIMC3
-static struct resource s5p_fimc3_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC3),
-};
-
-struct platform_device s5p_device_fimc3 = {
-	.name		= "s5p-fimc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s5p_fimc3_resource),
-	.resource	= s5p_fimc3_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC3 */
-
-/* G2D */
-
-#ifdef CONFIG_S5P_DEV_G2D
-static struct resource s5p_g2d_resource[] = {
-	[0] = {
-		.start	= S5P_PA_G2D,
-		.end	= S5P_PA_G2D + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_2D,
-		.end	= IRQ_2D,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s5p_device_g2d = {
-	.name		= "s5p-g2d",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_g2d_resource),
-	.resource	= s5p_g2d_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_G2D */
-
-#ifdef CONFIG_S5P_DEV_JPEG
-static struct resource s5p_jpeg_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_JPEG),
-};
-
-struct platform_device s5p_device_jpeg = {
-	.name		= "s5p-jpeg",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_jpeg_resource),
-	.resource	= s5p_jpeg_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /*  CONFIG_S5P_DEV_JPEG */
-
-/* FIMD0 */
-
-#ifdef CONFIG_S5P_DEV_FIMD0
-static struct resource s5p_fimd0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
-};
-
-struct platform_device s5p_device_fimd0 = {
-	.name		= "s5p-fb",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimd0_resource),
-	.resource	= s5p_fimd0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s5p_device_fimd0);
-}
-#endif /* CONFIG_S5P_DEV_FIMD0 */
-
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
-			 &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
-/* HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static struct resource s3c_hsmmc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc0 = {
-	.name		= "s3c-sdhci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
-	.resource	= s3c_hsmmc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc0_def_platdata,
-	},
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static struct resource s3c_hsmmc1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc1 = {
-	.name		= "s3c-sdhci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
-	.resource	= s3c_hsmmc1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc1_def_platdata,
-	},
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-/* HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static struct resource s3c_hsmmc2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc2 = {
-	.name		= "s3c-sdhci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
-	.resource	= s3c_hsmmc2_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc2_def_platdata,
-	},
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC3
-static struct resource s3c_hsmmc3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc3 = {
-	.name		= "s3c-sdhci",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
-	.resource	= s3c_hsmmc3_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc3_def_platdata,
-	},
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC3 */
-
-/* I2C */
-
-static struct resource s3c_i2c0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC),
-};
-
-struct platform_device s3c_device_i2c0 = {
-	.name		= "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-	.id		= 0,
-#else
-	.id		= -1,
-#endif
-	.num_resources	= ARRAY_SIZE(s3c_i2c0_resource),
-	.resource	= s3c_i2c0_resource,
-};
-
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 0;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c0);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-}
-
-#ifdef CONFIG_S3C_DEV_I2C1
-static struct resource s3c_i2c1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC1),
-};
-
-struct platform_device s3c_device_i2c1 = {
-	.name		= "s3c2410-i2c",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_i2c1_resource),
-	.resource	= s3c_i2c1_resource,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 1;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c1);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C1 */
-
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
-	.name		= "s3c2410-i2c",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
-	.resource	= s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 2;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c2);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
-	.name		= "s3c2440-i2c",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
-	.resource	= s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 3;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c3);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
-	.name		= "s3c2440-i2c",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
-	.resource	= s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 4;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c4);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
-	.name		= "s3c2440-i2c",
-	.id		= 5,
-	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
-	.resource	= s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 5;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c5);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
-	.name		= "s3c2440-i2c",
-	.id		= 6,
-	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
-	.resource	= s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 6;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c6);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
-	.name		= "s3c2440-i2c",
-	.id		= 7,
-	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
-	.resource	= s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 7;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c7);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2C HDMIPHY */
-
-#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
-static struct resource s5p_i2c_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
-};
-
-struct platform_device s5p_device_i2c_hdmiphy = {
-	.name		= "s3c2440-hdmiphy-i2c",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_i2c_resource),
-	.resource	= s5p_i2c_resource,
-};
-
-void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-
-		if (soc_is_exynos4210())
-			pd->bus_num = 8;
-		else if (soc_is_s5pv210())
-			pd->bus_num = 3;
-		else
-			pd->bus_num = 0;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s5p_device_i2c_hdmiphy);
-}
-#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
-	.name		= "s3c24xx-iis",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
-	.resource	= s3c_iis_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
-	.resource	= s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
-			 &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
-/* KEYPAD */
-
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-static struct resource samsung_keypad_resources[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
-};
-
-struct platform_device samsung_device_keypad = {
-	.name		= "samsung-keypad",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
-	.resource	= samsung_keypad_resources,
-};
-
-void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
-{
-	struct samsung_keypad_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
-			&samsung_device_keypad);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = samsung_keypad_cfg_gpio;
-}
-#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
-
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
-	.name		= "s3c2410-lcd",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
-	.resource	= s3c_lcd_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
-	if (npd) {
-		npd->displays = kmemdup(pd->displays,
-			sizeof(struct s3c2410fb_display) * npd->num_displays,
-			GFP_KERNEL);
-		if (!npd->displays)
-			printk(KERN_ERR "no memory for LCD display data\n");
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* MFC */
-
-#ifdef CONFIG_S5P_DEV_MFC
-static struct resource s5p_mfc_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
-	.name		= "s5p-mfc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
-	.resource	= s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
-	.name		= "s5p-mfc-l",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_mfc_r = {
-	.name		= "s5p-mfc-r",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_MFC */
-
-/* MIPI CSIS */
-
-#ifdef CONFIG_S5P_DEV_CSIS0
-static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis0_resource),
-	.resource	= s5p_mipi_csis0_resource,
-};
-#endif /* CONFIG_S5P_DEV_CSIS0 */
-
-#ifdef CONFIG_S5P_DEV_CSIS1
-static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis1_resource),
-	.resource	= s5p_mipi_csis1_resource,
-};
-#endif
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
-	.name		= "s3c2410-nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
-	.resource	= s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */
-
-	npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
-				&s3c_device_nand);
-	if (!npd)
-		return;
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
-	.name		= "samsung-onenand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
-	.resource	= s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
-	.name		= "samsung-onenand",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
-	.resource	= s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
-			 &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
-#ifdef CONFIG_S5P_DEV_ONENAND
-static struct resource s5p_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
-	[1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
-};
-
-struct platform_device s5p_device_onenand = {
-	.name		= "s5pc110-onenand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
-	.resource	= s5p_onenand_resources,
-};
-#endif /* CONFIG_S5P_DEV_ONENAND */
-
-/* PMU */
-
-#ifdef CONFIG_PLAT_S5P
-static struct resource s5p_pmu_resource[] = {
-	DEFINE_RES_IRQ(IRQ_PMU)
-};
-
-static struct platform_device s5p_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= ARRAY_SIZE(s5p_pmu_resource),
-	.resource	= s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
-	platform_device_register(&s5p_device_pmu);
-	return 0;
-}
-arch_initcall(s5p_pmu_init);
-#endif /* CONFIG_PLAT_S5P */
-
-/* PWM Timer */
-
-#ifdef CONFIG_SAMSUNG_DEV_PWM
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-#endif /* CONFIG_SAMSUNG_DEV_PWM */
-
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC),
-	[2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c2410-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
-	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c64xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_sdi_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
-	[1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		= "s3c2410-sdi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
-	.resource	= s3c_sdi_resource,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
-			 &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
-	.name		= "s3c2410-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
-	.resource	= s3c_spi0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
-	.name		= "s3c2410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
-	.resource	= s3c_spi1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c2410-ts",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
-	s3c_set_platdata(hard_s3c2410ts_info,
-			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c64xx-ts",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
-	if (!pd)
-		pd = &default_ts_data;
-
-	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_ts);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
-/* TV */
-
-#ifdef CONFIG_S5P_DEV_TV
-
-static struct resource s5p_hdmi_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
-	[1] = DEFINE_RES_IRQ(IRQ_HDMI),
-};
-
-struct platform_device s5p_device_hdmi = {
-	.name		= "s5p-hdmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
-	.resource	= s5p_hdmi_resources,
-};
-
-static struct resource s5p_sdo_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_SDO),
-};
-
-struct platform_device s5p_device_sdo = {
-	.name		= "s5p-sdo",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
-	.resource	= s5p_sdo_resources,
-};
-
-static struct resource s5p_mixer_resources[] = {
-	[0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
-	[1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
-	[2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
-};
-
-struct platform_device s5p_device_mixer = {
-	.name		= "s5p-mixer",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
-	.resource	= s5p_mixer_resources,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_S5P_DEV_TV */
-
-/* USB */
-
-#ifdef CONFIG_S3C_DEV_USB_HOST
-static struct resource s3c_usb_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USBH),
-};
-
-struct platform_device s3c_device_ohci = {
-	.name		= "s3c2410-ohci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_resource),
-	.resource	= s3c_usb_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
-	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
-			 &s3c_device_ohci);
-}
-#endif /* CONFIG_S3C_DEV_USB_HOST */
-
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		= "s3c2410-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	= s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* USB EHCI Host Controller */
-
-#ifdef CONFIG_S5P_DEV_USB_EHCI
-static struct resource s5p_ehci_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S5P_DEV_USB_EHCI */
-
-/* USB HSOTG */
-
-#ifdef CONFIG_S3C_DEV_USB_HSOTG
-static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
-	[1] = DEFINE_RES_IRQ(IRQ_OTG),
-};
-
-struct platform_device s3c_device_usb_hsotg = {
-	.name		= "s3c-hsotg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
-	.resource	= s3c_usb_hsotg_resources,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
-{
-	struct s3c_hsotg_plat *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
-			&s3c_device_usb_hsotg);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S3C_DEV_USB_HSOTG */
-
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
-	.name		= "s3c-hsudc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
-	.resource	= s3c_hsudc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
-	[1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		= "s3c2410-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
-	.resource	= s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-static struct resource s3c64xx_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c64xx_device_spi0 = {
-	.name		= "s3c64xx-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi0_resource),
-	.resource	= s3c64xx_spi0_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
-	.name		= "s3c64xx-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi1_resource),
-	.resource	= s3c64xx_spi1_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
-	.name		= "s3c64xx-spi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi2_resource),
-	.resource	= s3c64xx_spi2_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c
deleted file mode 100644
index eb9f4f53..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/amba/pl330.h>
-#include <linux/scatterlist.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
-				struct samsung_dma_info *info)
-{
-	struct dma_chan *chan;
-	dma_cap_mask_t mask;
-	struct dma_slave_config slave_config;
-	void *filter_param;
-
-	dma_cap_zero(mask);
-	dma_cap_set(info->cap, mask);
-
-	/*
-	 * If a dma channel property of a device node from device tree is
-	 * specified, use that as the fliter parameter.
-	 */
-	filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
-				(void *)dma_ch;
-	chan = dma_request_channel(mask, pl330_filter, filter_param);
-
-	if (info->direction == DMA_DEV_TO_MEM) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = info->direction;
-		slave_config.src_addr = info->fifo;
-		slave_config.src_addr_width = info->width;
-		slave_config.src_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else if (info->direction == DMA_MEM_TO_DEV) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = info->direction;
-		slave_config.dst_addr = info->fifo;
-		slave_config.dst_addr_width = info->width;
-		slave_config.dst_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	}
-
-	return (unsigned)chan;
-}
-
-static int samsung_dmadev_release(unsigned ch,
-			struct s3c2410_dma_client *client)
-{
-	dma_release_channel((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static int samsung_dmadev_prepare(unsigned ch,
-			struct samsung_dma_prep_info *info)
-{
-	struct scatterlist sg;
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_async_tx_descriptor *desc;
-
-	switch (info->cap) {
-	case DMA_SLAVE:
-		sg_init_table(&sg, 1);
-		sg_dma_len(&sg) = info->len;
-		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
-			    info->len, offset_in_page(info->buf));
-		sg_dma_address(&sg) = info->buf;
-
-		desc = dmaengine_prep_slave_sg(chan,
-			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
-		break;
-	case DMA_CYCLIC:
-		desc = dmaengine_prep_dma_cyclic(chan,
-			info->buf, info->len, info->period, info->direction);
-		break;
-	default:
-		dev_err(&chan->dev->device, "unsupported format\n");
-		return -EFAULT;
-	}
-
-	if (!desc) {
-		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
-		return -EFAULT;
-	}
-
-	desc->callback = info->fp;
-	desc->callback_param = info->fp_param;
-
-	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_trigger(unsigned ch)
-{
-	dma_async_issue_pending((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_flush(unsigned ch)
-{
-	return dmaengine_terminate_all((struct dma_chan *)ch);
-}
-
-static struct samsung_dma_ops dmadev_ops = {
-	.request	= samsung_dmadev_request,
-	.release	= samsung_dmadev_release,
-	.prepare	= samsung_dmadev_prepare,
-	.trigger	= samsung_dmadev_trigger,
-	.started	= NULL,
-	.flush		= samsung_dmadev_flush,
-	.stop		= samsung_dmadev_flush,
-};
-
-void *samsung_dmadev_get_ops(void)
-{
-	return &dmadev_ops;
-}
-EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c
deleted file mode 100644
index 6143aa14..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma.c
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c2410_dma_buf;
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
-
-/* s3c_dma_lookup_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return s3c_dma_chan_map[channel];
-}
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	chan->flags = flags;
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h
deleted file mode 100644
index a927bee5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung ADC Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_CORE_H
-#define __ASM_PLAT_ADC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_adc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_adc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h
deleted file mode 100644
index b258a08d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/adc.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/	
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C ADC driver information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
-
-struct s3c_adc_client;
-
-extern int s3c_adc_start(struct s3c_adc_client *client,
-			 unsigned int channel, unsigned int nr_samples);
-
-extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
-
-extern struct s3c_adc_client *
-	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(struct s3c_adc_client *client,
-					unsigned selected),
-			 void (*conv)(struct s3c_adc_client *client,
-				      unsigned d0, unsigned d1,
-				      unsigned *samples_left),
-			 unsigned int is_ts);
-
-extern void s3c_adc_release(struct s3c_adc_client *client);
-
-#endif /* __ASM_PLAT_ADC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h
deleted file mode 100644
index f5a4ec71..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_CORE_H
-#define __ASM_PLAT_ATA_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
-*/
-
-/* re-define device name depending on support. */
-static inline void s3c_cfcon_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-	s3c_device_cfcon.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af528..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h
deleted file mode 100644
index ad530c78..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/backlight.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_BACKLIGHT_H
-#define __ASM_PLAT_BACKLIGHT_H __FILE__
-
-/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
- * @no:		GPIO number for PWM timer out
- * @func:	Special function of GPIO line for PWM timer
- */
-struct samsung_bl_gpio_info {
-	int no;
-	int func;
-};
-
-extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data);
-
-#endif /* __ASM_PLAT_BACKLIGHT_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h
deleted file mode 100644
index a5708bf8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_CAMPORT_H_
-#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
-	S5P_CAMPORT_A,
-	S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h
deleted file mode 100644
index 50a8ca7c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
- *
- * Parts taken from arch/arm/plat-s3c64xx/clock.c
- *	Copyright 2008 Openmoko, Inc.
- *	Copyright 2008 Simtec Electronics
- *		Ben Dooks <ben@simtec.co.uk>
- *		http://armlinux.simtec.co.uk/
- *
- * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
- * Copyright 2009 Harald Welte
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct clksrc_sources - list of sources for a given clock
- * @sources: array of pointers to clocks
- * @nr_sources: The size of @sources
- */
-struct clksrc_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-/**
- * struct clksrc_reg - register definition for clock control bits
- * @reg: pointer to the register in virtual memory.
- * @shift: the shift in bits to where the bitfield is.
- * @size: the size in bits of the bitfield.
- *
- * This specifies the size and position of the bits we are interested
- * in within the register specified by @reg.
- */
-struct clksrc_reg {
-	void __iomem		*reg;
-	unsigned short		shift;
-	unsigned short		size;
-};
-
-/**
- * struct clksrc_clk - class of clock for newer style samsung devices.
- * @clk: the standard clock representation
- * @sources: the sources for this clock
- * @reg_src: the register definition for selecting the clock's source
- * @reg_div: the register definition for the clock's output divisor
- *
- * This clock implements the features required by the newer SoCs where
- * the standard clock block provides an input mux and a post-mux divisor
- * to provide the periperhal's clock.
- *
- * The array of @sources provides the mapping of mux position to the
- * clock, and @reg_src shows the code where to modify to change the mux
- * position. The @reg_div defines how to change the divider settings on
- * the output.
- */
-struct clksrc_clk {
-	struct clk		clk;
-	struct clksrc_sources	*sources;
-
-	struct clksrc_reg	reg_src;
-	struct clksrc_reg	reg_div;
-};
-
-/**
- * s3c_set_clksrc() - setup the clock from the register settings
- * @clk: The clock to setup.
- * @announce: true to announce the setting to printk().
- *
- * Setup the clock from the current register settings, for when the
- * kernel boots or if it is resuming from a possibly unknown state.
- */
-extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
-
-/**
- * s3c_register_clksrc() register clocks from an array of clksrc clocks
- * @srcs: The array of clocks to register
- * @size: The size of the @srcs array.
- *
- * Initialise and register the array of clocks described by @srcs.
- */
-extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h
deleted file mode 100644
index a62753dc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_CLOCK_H
-#define __ASM_PLAT_CLOCK_H __FILE__
-
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-struct clk;
-
-/**
- * struct clk_ops - standard clock operations
- * @set_rate: set the clock rate, see clk_set_rate().
- * @get_rate: get the clock rate, see clk_get_rate().
- * @round_rate: round a given clock rate, see clk_round_rate().
- * @set_parent: set the clock's parent, see clk_set_parent().
- *
- * Group the common clock implementations together so that we
- * don't have to keep setting the same fields again. We leave
- * enable in struct clk.
- *
- * Adding an extra layer of indirection into the process should
- * not be a problem as it is unlikely these operations are going
- * to need to be called quickly.
- */
-struct clk_ops {
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	const char		*devname;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	struct clk_ops		*ops;
-	int		    (*enable)(struct clk *, int enable);
-	struct clk_lookup	lookup;
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C2443/S3C2416 specific clocks */
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-extern struct clk clk_xusbxti;
-
-extern int clk_default_setrate(struct clk *clk, unsigned long rate);
-extern struct clk_ops clk_ops_def_setrate;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern void s3c_register_clocks(struct clk *clk, int nr_clks);
-extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s5p_register_clocks(unsigned long xtal_freq);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
-				 unsigned long hclk,
-				 unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-
-/* S3C2410 specific clock functions */
-
-extern int s3c2410_baseclk_add(void);
-
-/* S3C2443/S3C2416 specific clock functions */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
-/* Global watchdog clock used by arch_wtd_reset() callback */
-
-extern struct clk *s3c2410_wdtclk;
-
-#endif /* __ASM_PLAT_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h
deleted file mode 100644
index ba028f1e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
deleted file mode 100644
index 95509d8e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/cpu-freq.h>
-
-struct seq_file;
-
-#define MAX_BANKS (8)
-#define S3C2412_MAX_IO	(8)
-
-/**
- * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
- * @bankcon: The cached version of settings in this structure.
- * @tacp:
- * @tacs: Time from address valid to nCS asserted.
- * @tcos: Time from nCS asserted to nOE or nWE asserted.
- * @tacc: Time that nOE or nWE is asserted.
- * @tcoh: Time nCS is held after nOE or nWE are released.
- * @tcah: Time address is held for after
- * @nwait_en: Whether nWAIT is enabled for this bank.
- *
- * This structure represents the IO timings for a S3C2410 style IO bank
- * used by the CPU frequency support if it needs to change the settings
- * of the IO.
- */
-struct s3c2410_iobank_timing {
-	unsigned long	bankcon;
-	unsigned int	tacp;
-	unsigned int	tacs;
-	unsigned int	tcos;
-	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
-	unsigned int	tcah;		/* Address hold after nCS */
-	unsigned char	nwait_en;	/* nWait enabled for bank. */
-};
-
-/**
- * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
- * @idcy: The idle cycle time between transactions.
- * @wstrd: nCS release to end of read cycle.
- * @wstwr: nCS release to end of write cycle.
- * @wstoen: nCS assertion to nOE assertion time.
- * @wstwen: nCS assertion to nWE assertion time.
- * @wstbrd: Burst ready delay.
- * @smbidcyr: Register cache for smbidcyr value.
- * @smbwstrd: Register cache for smbwstrd value.
- * @smbwstwr: Register cache for smbwstwr value.
- * @smbwstoen: Register cache for smbwstoen value.
- * @smbwstwen: Register cache for smbwstwen value.
- * @smbwstbrd: Register cache for smbwstbrd value.
- *
- * Timing information for a IO bank on an S3C2412 or similar system which
- * uses a PL093 block.
- */
-struct s3c2412_iobank_timing {
-	unsigned int	idcy;
-	unsigned int	wstrd;
-	unsigned int	wstwr;
-	unsigned int	wstoen;
-	unsigned int	wstwen;
-	unsigned int	wstbrd;
-
-	/* register cache */
-	unsigned char	smbidcyr;
-	unsigned char	smbwstrd;
-	unsigned char	smbwstwr;
-	unsigned char	smbwstoen;
-	unsigned char	smbwstwen;
-	unsigned char	smbwstbrd;
-};
-
-union s3c_iobank {
-	struct s3c2410_iobank_timing	*io_2410;
-	struct s3c2412_iobank_timing	*io_2412;
-};
-
-/**
- * struct s3c_iotimings - Chip IO timings holder
- * @bank: The timings for each IO bank.
- */
-struct s3c_iotimings {
-	union s3c_iobank	bank[MAX_BANKS];
-};
-
-/**
- * struct s3c_plltab - PLL table information.
- * @vals: List of PLL values.
- * @size: Size of the PLL table @vals.
- */
-struct s3c_plltab {
-	struct s3c_pllval	*vals;
-	int			 size;
-};
-
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @max: Maxium settings, derived from core, board and user settings.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- * @lock_pll: Set if the PLL settings cannot be changed.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_freq		max;
-	struct cpufreq_frequency_table pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-
-	unsigned int	lock_pll:1;
-};
-
-/**
- * struct s3c_cpufreq_info - Information for the CPU frequency driver.
- * @name: The name of this implementation.
- * @max: The maximum frequencies for the system.
- * @latency: Transition latency to give to cpufreq.
- * @locktime_m: The lock-time in uS for the MPLL.
- * @locktime_u: The lock-time in uS for the UPLL.
- * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to achieve
- *	any frequency changes. This is really only need by devices like the
- *	S3C2410 where there is no or limited divider between the PLL and the
- *	ARMCLK.
- * @resume_clocks: Update the clocks on resume.
- * @get_iotiming: Get the current IO timing data, mainly for use at start.
- * @set_iotiming: Update the IO timings from the cached copies calculated
- *	from the @calc_iotiming entry when changing the frequency.
- * @calc_iotiming: Calculate and update the cached copies of the IO timings
- *	from the newly calculated frequencies.
- * @calc_freqtable: Calculate (fill in) the given frequency table from the
- *	current frequency configuration. If the table passed in is NULL,
- *	then the return is the number of elements to be filled for allocation
- *	of the table.
- * @set_refresh: Set the memory refresh configuration.
- * @set_fvco: Set the PLL frequencies.
- * @set_divs: Update the clock divisors.
- * @calc_divs: Calculate the clock divisors.
- */
-struct s3c_cpufreq_info {
-	const char		*name;
-	struct s3c_freq		max;
-
-	unsigned int		latency;
-
-	unsigned int		locktime_m;
-	unsigned int		locktime_u;
-	unsigned char		locktime_bits;
-
-	unsigned int		need_pll:1;
-
-	/* driver routines */
-
-	void		(*resume_clocks)(void);
-
-	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
-					 struct s3c_iotimings *timings);
-
-	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
-					  struct cpufreq_frequency_table *t,
-					  size_t table_size);
-
-	void		(*debug_io_show)(struct seq_file *seq,
-					 struct s3c_cpufreq_config *cfg,
-					 union s3c_iobank *iob);
-
-	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
-	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
-	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
-	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
-};
-
-extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
-
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
-			       unsigned int plls_no);
-
-/* exports and utilities for debugfs */
-extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
-extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-#define s3c_cpufreq_debugfs_call(x) x
-#else
-#define s3c_cpufreq_debugfs_call(x) NULL
-#endif
-
-/* Useful utility functions. */
-
-extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
-
-/* S3C2410 and compatible exported functions */
-
-extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
-
-#ifdef CONFIG_S3C2410_IOTIMING
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-#else
-#define s3c2410_iotiming_debugfs NULL
-#define s3c2410_iotiming_calc NULL
-#define s3c2410_iotiming_get NULL
-#define s3c2410_iotiming_set NULL
-#endif /* CONFIG_S3C2410_IOTIMING */
-
-/* S3C2412 compatible routines */
-
-#ifdef CONFIG_S3C2412_IOTIMING
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-#else
-#define s3c2412_iotiming_debugfs NULL
-#define s3c2412_iotiming_calc NULL
-#define s3c2412_iotiming_get NULL
-#define s3c2412_iotiming_set NULL
-#endif /* CONFIG_S3C2412_IOTIMING */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
-#define s3c_freq_dbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
-#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
-
-static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
-				      int index, size_t table_size,
-				      unsigned int freq)
-{
-	if (index < 0)
-		return index;
-
-	if (table) {
-		if (index >= table_size)
-			return -ENOMEM;
-
-		s3c_freq_dbg("%s: { %d = %u kHz }\n",
-			     __func__, index, freq);
-
-		table[index].index = index;
-		table[index].frequency = freq;
-	}
-
-	return index + 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h
deleted file mode 100644
index 80c4a809..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/cpu-freq.h
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - driver and board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/cpufreq.h>
-
-struct s3c_cpufreq_info;
-struct s3c_cpufreq_board;
-struct s3c_iotimings;
-
-/**
- * struct s3c_freq - frequency information (mainly for core drivers)
- * @fclk: The FCLK frequency in Hz.
- * @armclk: The ARMCLK frequency in Hz.
- * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
- * @hclk: The HCLK frequency in Hz.
- * @pclk: The PCLK frequency in Hz.
- *
- * This contains the frequency information about the current configuration
- * mainly for the core drivers to ensure we do not end up passing about
- * a large number of parameters.
- *
- * The @hclk_tns field is a useful cache for the parts of the drivers that
- * need to calculate IO timings and suchlike.
- */
-struct s3c_freq {
-	unsigned long	fclk;
-	unsigned long	armclk;
-	unsigned long	hclk_tns;	/* in 10ths of ns */
-	unsigned long	hclk;
-	unsigned long	pclk;
-};
-
-/**
- * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
- * @freqs: The cpufreq setting information.
- * @old: The old clock settings.
- * @new: The new clock settings.
- * @pll_changing: Set if the PLL is changing.
- *
- * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
- * notification can use this information that is not provided by just
- * having the core frequency alone.
- *
- * The pll_changing flag is used to indicate if the PLL itself is
- * being set during this change. This is important as the clocks
- * will temporarily be set to the XTAL clock during this time, so
- * drivers may want to close down their output during this time.
- *
- * Note, this is not being used by any current drivers and therefore
- * may be removed in the future.
- */
-struct s3c_cpufreq_freqs {
-	struct cpufreq_freqs	freqs;
-	struct s3c_freq		old;
-	struct s3c_freq		new;
-
-	unsigned int		pll_changing:1;
-};
-
-#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
-
-/**
- * struct s3c_clkdivs - clock divisor information
- * @p_divisor: Divisor from FCLK to PCLK.
- * @h_divisor: Divisor from FCLK to HCLK.
- * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
- * @dvs: Non-zero if using DVS mode for ARMCLK.
- *
- * Divisor settings for the core clocks.
- */
-struct s3c_clkdivs {
-	int		p_divisor;
-	int		h_divisor;
-	int		arm_divisor;
-	unsigned char	dvs;
-};
-
-#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
-
-/**
- * struct s3c_pllval - PLL value entry.
- * @freq: The frequency for this entry in Hz.
- * @pll_reg: The PLL register setting for this PLL value.
- */
-struct s3c_pllval {
-	unsigned long		freq;
-	unsigned long		pll_reg;
-};
-
-/**
- * struct s3c_cpufreq_board - per-board cpu frequency informatin
- * @refresh: The SDRAM refresh period in nanoseconds.
- * @auto_io: Set if the IO timing settings should be generated from the
- *	initialisation time hardware registers.
- * @need_io: Set if the board has external IO on any of the chipselect
- *	lines that will require the hardware timing registers to be
- *	updated on a clock change.
- * @max: The maxium frequency limits for the system. Any field that
- *	is left at zero will use the CPU's settings.
- *
- * This contains the board specific settings that affect how the CPU
- * drivers chose settings. These include the memory refresh and IO
- * timing information.
- *
- * Registration depends on the driver being used, the ARMCLK only
- * implementation does not currently need this but the older style
- * driver requires this to be available.
- */
-struct s3c_cpufreq_board {
-	unsigned int	refresh;
-	unsigned int	auto_io:1;	/* automatically init io timings. */
-	unsigned int	need_io:1;	/* set if needs io timing support. */
-
-	/* any non-zero field in here is taken as an upper limit. */
-	struct s3c_freq	max;	/* frequency limits */
-};
-
-/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
-#define __init_or_cpufreq
-#else
-#define __init_or_cpufreq __init
-#endif
-
-/* Board functions */
-
-#ifdef CONFIG_CPU_FREQ_S3C
-extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
-#else
-
-static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	return 0;
-}
-#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h
deleted file mode 100644
index 787ceaca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/cpu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#ifndef __SAMSUNG_PLAT_CPU_H
-#define __SAMSUNG_PLAT_CPU_H
-
-extern unsigned long samsung_cpu_id;
-
-#define S3C24XX_CPU_ID		0x32400000
-#define S3C24XX_CPU_MASK	0xFFF00000
-
-#define S3C6400_CPU_ID		0x36400000
-#define S3C6410_CPU_ID		0x36410000
-#define S3C64XX_CPU_MASK	0xFFFFF000
-
-#define S5P6440_CPU_ID		0x56440000
-#define S5P6450_CPU_ID		0x36450000
-#define S5P64XX_CPU_MASK	0xFFFFF000
-
-#define S5PC100_CPU_ID		0x43100000
-#define S5PC100_CPU_MASK	0xFFFFF000
-
-#define S5PV210_CPU_ID		0x43110000
-#define S5PV210_CPU_MASK	0xFFFFF000
-
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
-#define IS_SAMSUNG_CPU(name, id, mask)		\
-static inline int is_samsung_##name(void)	\
-{						\
-	return ((samsung_cpu_id & mask) == (id & mask));	\
-}
-
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
-IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
-    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
-    defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx()	is_samsung_s3c24xx()
-#else
-# define soc_is_s3c24xx()	0
-#endif
-
-#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
-#else
-# define soc_is_s3c64xx()	0
-#endif
-
-#if defined(CONFIG_CPU_S5P6440)
-# define soc_is_s5p6440()	is_samsung_s5p6440()
-#else
-# define soc_is_s5p6440()	0
-#endif
-
-#if defined(CONFIG_CPU_S5P6450)
-# define soc_is_s5p6450()	is_samsung_s5p6450()
-#else
-# define soc_is_s5p6450()	0
-#endif
-
-#if defined(CONFIG_CPU_S5PC100)
-# define soc_is_s5pc100()	is_samsung_s5pc100()
-#else
-# define soc_is_s5pc100()	0
-#endif
-
-#if defined(CONFIG_CPU_S5PV210)
-# define soc_is_s5pv210()	is_samsung_s5pv210()
-#else
-# define soc_is_s5pv210()	0
-#endif
-
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* per-cpu initialisation function table. */
-
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(void);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
-extern void s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cpus, unsigned int cputab_size);
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-extern void s5p_init_irq(u32 *vic, u32 num_vic);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_cpu(void);
-extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
-
-extern unsigned int samsung_rev(void);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
-/* system device subsystems */
-
-extern struct bus_type s3c2410_subsys;
-extern struct bus_type s3c2410a_subsys;
-extern struct bus_type s3c2412_subsys;
-extern struct bus_type s3c2416_subsys;
-extern struct bus_type s3c2440_subsys;
-extern struct bus_type s3c2442_subsys;
-extern struct bus_type s3c2443_subsys;
-extern struct bus_type s3c6410_subsys;
-extern struct bus_type s5p64x0_subsys;
-extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
-
-extern void (*s5pc1xx_idle)(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S
deleted file mode 100644
index 207e2753..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/debug-macro.S
- *
- * Copyright 2005, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-serial.h>
-
-/* The S5PV210/S5PC110 implementations are as belows. */
-
-	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
-	.endm
-
-	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S5PV210_UFSTAT_TXFULL
-	.endm
-
-/* The S3C2440 implementations are used by default as they are the
- * most widely re-used */
-
-	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-#ifndef fifo_level
-#define fifo_level fifo_level_s3c2440
-#endif
-
-	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2440_UFSTAT_TXFULL
-	.endm
-
-#ifndef fifo_full
-#define fifo_full fifo_full_s3c2440
-#endif
-
-	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-	.endm
-
-	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_full \rd, \rx
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
-
-	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_level \rd, \rx
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h
deleted file mode 100644
index 2155d4af..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/devs.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DEVS_H
-#define __PLAT_DEVS_H __FILE__
-
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-extern struct s3c24xx_uart_resources s5p_uart_resources[];
-extern struct s3c24xx_uart_resources exynos4_uart_resources[];
-extern struct s3c24xx_uart_resources exynos5_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c64xx_device_ac97;
-extern struct platform_device s3c64xx_device_iis0;
-extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
-extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_spi2;
-
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
-extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-extern struct platform_device s3c_device_hsmmc3;
-extern struct platform_device s3c_device_i2c0;
-extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
-
-extern struct platform_device s5p_device_ehci;
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-extern struct platform_device s5p_device_fimc_md;
-extern struct platform_device s5p_device_jpeg;
-extern struct platform_device s5p_device_g2d;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s5p_device_hdmi;
-extern struct platform_device s5p_device_i2c_hdmiphy;
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-extern struct platform_device s5p_device_mixer;
-extern struct platform_device s5p_device_onenand;
-extern struct platform_device s5p_device_sdo;
-
-extern struct platform_device s5p6440_device_iis;
-extern struct platform_device s5p6440_device_pcm;
-
-extern struct platform_device s5p6450_device_iis0;
-extern struct platform_device s5p6450_device_iis1;
-extern struct platform_device s5p6450_device_iis2;
-extern struct platform_device s5p6450_device_pcm0;
-
-
-extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_iis0;
-extern struct platform_device s5pc100_device_iis1;
-extern struct platform_device s5pc100_device_iis2;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
-extern struct platform_device s5pc100_device_spdif;
-
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_dwmci;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_ohci;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_pd[];
-extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
-
-extern struct platform_device samsung_asoc_dma;
-extern struct platform_device samsung_asoc_idma;
-extern struct platform_device samsung_device_keypad;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
-/**
- * s3c_set_platdata() - helper for setting platform data
- * @pd: The default platform data for this device.
- * @pdsize: The size of the platform data.
- * @pdev: Pointer to the device to fill in.
- *
- * This helper replaces a number of calls that copy and then set the
- * platform data of the device.
- */
-extern void *s3c_set_platdata(void *pd, size_t pdsize,
-			      struct platform_device *pdev);
-
-#endif /* __PLAT_DEVS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h
deleted file mode 100644
index 32ff2a92..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung S3C DMA core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
-
-extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h
deleted file mode 100644
index 71a6827c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma-ops.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_DMA_OPS_H_
-#define __SAMSUNG_DMA_OPS_H_ __FILE__
-
-#include <linux/dmaengine.h>
-#include <mach/dma.h>
-
-struct samsung_dma_prep_info {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	dma_addr_t buf;
-	unsigned long period;
-	unsigned long len;
-	void (*fp)(void *data);
-	void *fp_param;
-};
-
-struct samsung_dma_info {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	enum dma_slave_buswidth width;
-	dma_addr_t fifo;
-	struct s3c2410_dma_client *client;
-	struct property *dt_dmach_prop;
-};
-
-struct samsung_dma_ops {
-	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
-	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
-	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
-	int (*trigger)(unsigned ch);
-	int (*started)(unsigned ch);
-	int (*flush)(unsigned ch);
-	int (*stop)(unsigned ch);
-};
-
-extern void *samsung_dmadev_get_ops(void);
-extern void *s3c_dma_get_ops(void);
-
-static inline void *__samsung_dma_get_ops(void)
-{
-	if (samsung_dma_is_dmadev())
-		return samsung_dmadev_get_ops();
-	else
-		return s3c_dma_get_ops();
-}
-
-/*
- * samsung_dma_get_ops
- * get the set of samsung dma operations
- */
-#define samsung_dma_get_ops() __samsung_dma_get_ops()
-
-#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h
deleted file mode 100644
index 0670f37a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DMA_PL330_H_
-#define __DMA_PL330_H_ __FILE__
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since DMA PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
-	DMACH_DT_PROP = -1,
-	DMACH_UART0_RX = 0,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-	DMACH_USI_RX,
-	DMACH_USI_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_MSM_REQ3,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ0,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	DMACH_MIPI_HSI0,
-	DMACH_MIPI_HSI1,
-	DMACH_MIPI_HSI2,
-	DMACH_MIPI_HSI3,
-	DMACH_MIPI_HSI4,
-	DMACH_MIPI_HSI5,
-	DMACH_MIPI_HSI6,
-	DMACH_MIPI_HSI7,
-	DMACH_MTOM_0,
-	DMACH_MTOM_1,
-	DMACH_MTOM_2,
-	DMACH_MTOM_3,
-	DMACH_MTOM_4,
-	DMACH_MTOM_5,
-	DMACH_MTOM_6,
-	DMACH_MTOM_7,
-	/* END Marker, also used to denote a reserved channel */
-	DMACH_MAX,
-};
-
-struct s3c2410_dma_client {
-	char	*name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return true;
-}
-
-#include <plat/dma-ops.h>
-
-#endif	/* __DMA_PL330_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
deleted file mode 100644
index d0157631..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support - per SoC functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/dma-core.h>
-
-extern struct bus_type dma_subsys;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-
-	unsigned long		 channels[S3C_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum dma_data_direction dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h
deleted file mode 100644
index 7b02143c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#include <linux/dma-mapping.h>
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-struct s3c2410_dma_chan;
-enum dma_ch;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(enum dma_ch channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(enum dma_ch channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum dma_data_direction source, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(enum dma_ch channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
-
-#include <plat/dma-ops.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h
deleted file mode 100644
index 6abcbf13..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fb-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Pawel Osciak <p.osciak@samsung.com>
- *
- * Samsung framebuffer driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PLAT_FB_CORE_H
-#define __ASM_PLAT_FB_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name depending on support. */
-static inline void s3c_fb_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_FB
-	s3c_device_fb.name = name;
-#endif
-}
-
-/* Re-define device name depending on support. */
-static inline void s5p_fb_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMD0
-	case 0:
-		s5p_device_fimd0.name = name;
-	break;
-#endif
-	default:
-		printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
-	break;
-	}
-}
-
-#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
deleted file mode 100644
index 4e5d9588..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_FB_S3C2410_H
-#define __ASM_PLAT_FB_S3C2410_H __FILE__
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h
deleted file mode 100644
index 0fedf47f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - FB platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_FB_H
-#define __PLAT_S3C_FB_H __FILE__
-
-/* S3C_FB_MAX_WIN
- * Set to the maximum number of windows that any of the supported hardware
- * can use. Since the platform data uses this for an array size, having it
- * set to the maximum of any version of the hardware can do is safe.
- */
-#define S3C_FB_MAX_WIN	(5)
-
-/**
- * struct s3c_fb_pd_win - per window setup data
- * @win_mode: The display parameters to initialise (not for window 0)
- * @virtual_x: The virtual X size.
- * @virtual_y: The virtual Y size.
- */
-struct s3c_fb_pd_win {
-	struct fb_videomode	win_mode;
-
-	unsigned short		default_bpp;
-	unsigned short		max_bpp;
-	unsigned short		virtual_x;
-	unsigned short		virtual_y;
-};
-
-/**
- * struct s3c_fb_platdata -  S3C driver platform specific information
- * @setup_gpio: Setup the external GPIO pins to the right state to transfer
- *		the data from the display system to the connected display
- *		device.
- * @default_win: default window layer number to be used for UI layer.
- * @vidcon0: The base vidcon0 values to control the panel data format.
- * @vidcon1: The base vidcon1 values to control the panel data output.
- * @win: The setup data for each hardware window, or NULL for unused.
- * @display_mode: The LCD output display mode.
- *
- * The platform data supplies the video driver with all the information
- * it requires to work with the display(s) attached to the machine. It
- * controls the initial mode, the number of display windows (0 is always
- * the base framebuffer) that are initialised etc.
- *
- */
-struct s3c_fb_platdata {
-	void	(*setup_gpio)(void);
-
-	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
-
-	u32			 default_win;
-
-	u32			 vidcon0;
-	u32			 vidcon1;
-};
-
-/**
- * s3c_fb_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s3c64xx_fb_gpio_setup_24bpp(void);
-
-/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
-/**
- * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pv210_fb_gpio_setup_24bpp(void);
-
-/**
- * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
- */
-extern void exynos4_fimd0_gpio_setup_24bpp(void);
-
-/**
- * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5p64x0_fb_gpio_setup_24bpp(void);
-
-#endif /* __PLAT_S3C_FB_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h
deleted file mode 100644
index 945a99d5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fimc-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Samsung camera interface driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_FIMC_CORE_H
-#define __ASM_PLAT_FIMC_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s3c_fimc_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMC0
-	case 0:
-		s5p_device_fimc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
-	case 1:
-		s5p_device_fimc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
-	case 2:
-		s5p_device_fimc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
-	case 3:
-		s5p_device_fimc3.name = name;
-		break;
-#endif
-	}
-}
-
-#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h
deleted file mode 100644
index 535d06a3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/fiq.h
- *
- * Copyright (c) 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU FIQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
deleted file mode 100644
index a181d7ce..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung Platform - GPIO pin configuration helper definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This is meant for core cpu support, machine or other driver files
- * should not be including this header.
- */
-
-#ifndef __PLAT_GPIO_CFG_HELPERS_H
-#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
-
-/* As a note, all gpio configuration functions are entered exclusively, either
- * with the relevant lock held or the system prevented from doing anything else
- * by disabling interrupts.
-*/
-
-static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
-					 unsigned int off, unsigned int config)
-{
-	return (chip->config->set_config)(chip, off, config);
-}
-
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
-					      unsigned int off)
-{
-	return (chip->config->get_config)(chip, off);
-}
-
-static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
-					  unsigned int off, samsung_gpio_pull_t pull)
-{
-	return (chip->config->set_pull)(chip, off, pull);
-}
-
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
-							  unsigned int off)
-{
-	return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-				    unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-				      unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
-				       unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
-						       unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-						    unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-						      unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-						unsigned int off);
-
-#endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h
deleted file mode 100644
index df8155b9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-/* Note, this interface is being added to the s3c64xx arch first and will
- * be added to the s3c24xx systems later.
- */
-
-#ifndef __PLAT_GPIO_CFG_H
-#define __PLAT_GPIO_CFG_H __FILE__
-
-#include<linux/types.h>
-
-typedef unsigned int __bitwise__ samsung_gpio_pull_t;
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-/* forward declaration if gpio-core.h hasn't been included */
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_cfg GPIO configuration
- * @cfg_eint: Configuration setting when used for external interrupt source
- * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
- * @set_config: Set the current configuration for the GPIO
- * @get_config: Read the current configuration for the GPIO
- *
- * Each chip can have more than one type of GPIO bank available and some
- * have different capabilites even when they have the same control register
- * layouts. Provide an point to vector control routine and provide any
- * per-bank configuration information that other systems such as the
- * external interrupt code will need.
- *
- * @sa samsung_gpio_cfgpin
- * @sa s3c_gpio_getcfg
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_getpull
- */
-struct samsung_gpio_cfg {
-	unsigned int	cfg_eint;
-
-	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
-				    samsung_gpio_pull_t pull);
-
-	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
-			       unsigned config);
-};
-
-#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
-#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
-
-/* Defines for generic pin configurations */
-#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
-#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
-#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
-
-#define samsung_gpio_is_cfg_special(_cfg) \
-	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
-
-/**
- * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
- * @pin pin The pin number to configure.
- * @to to The configuration for the pin's function.
- *
- * Configure which function is actually connected to the external
- * pin, such as an gpio input, output or some form of special function
- * connected to an internal peripheral block.
- *
- * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
- * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
- * will then generate the correct bit mask and shift for the configuration.
- *
- * If a bank of GPIOs all needs to be set to special-function 2, then
- * the following code will work:
- *
- *	for (gpio = start; gpio < end; gpio++)
- *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- *
- * The @to parameter can also be a specific value already shifted to the
- * correct position in the control register, although these are discouraged
- * in newer kernels and are only being kept for compatibility.
- */
-extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-
-/**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
-/**
- * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
- * @start: The pin number to start at
- * @nr: The number of pins to configure from @start.
- * @cfg: The configuration for the pin's function
- *
- * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
- *
- * @sa s3c_gpio_cfgpin.
- */
-extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg);
-
-/* Define values for the pull-{up,down} available for each gpio pin.
- *
- * These values control the state of the weak pull-{up,down} resistors
- * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependent on the chip that is being
- * used to whether the particular mode is available.
- */
-#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
-
-/**
- * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
- * @pin: The pin number to configure the pull resistor.
- * @pull: The configuration for the pull resistor.
- *
- * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successful, or a negative error
- * code if the pin cannot support the requested pull setting.
- *
- * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
-*/
-extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
-/* configure `all` aspects of an gpio */
-
-/**
- * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
- * @start: The gpio number to start at.
- * @nr: The number of gpio to configure from @start.
- * @cfg: The configuration to use
- * @pull: The pull setting to use.
- *
- * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
- * @gpio and running for @size.
- *
- * @sa s3c_gpio_cfgpin
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_cfgpin_range
- */
-extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg, samsung_gpio_pull_t pull);
-
-static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
-					   unsigned int cfg)
-{
-	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
-}
-
-/* Define values for the drvstr available for each gpio pin.
- *
- * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5P series.
- */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
-
-/**
- * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the driver streght value for the specified pin.
-*/
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
-
-/**
- * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
- * @pin: The pin number to configure the driver streght value
- * @drvstr: The new value of the driver strength
- *
- * This function sets the driver strength value for the specified pin.
- * It will return 0 if successful, or a negative error code if the pin
- * cannot support the requested setting.
-*/
-extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
-
-/**
- * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
- * @pin: The pin number from the group to be registered
- *
- * This function registers gpio interrupt support for the group that the
- * specified pin belongs to.
- *
- * The total number of gpio pins is quite large ob s5p series. Registering
- * irq support for all of them would be a resource waste. Because of that the
- * interrupt support for standard gpio pins is registered dynamically.
- *
- * It will return the irq number of the interrupt that has been registered
- * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
- * to call this function more than once for the same gpio group (the group
- * will be registered only once).
- */
-extern int s5p_register_gpio_interrupt(int pin);
-
-/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
- * registration (see s5p_register_gpio_interrupt function)
- * @chain_irq: chained irq number for the gpio int handler for this bank
- * @start: start gpio group number of this bank
- * @nr_groups: number of gpio groups handled by this bank
- *
- * This functions registers initial information about gpio banks that
- * can be later used by the s5p_register_gpio_interrupt() function to
- * enable support for gpio interrupt for particular gpio group.
- */
-#ifdef CONFIG_S5P_GPIO_INT
-extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
-#else
-#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
-#endif
-
-#endif /* __PLAT_GPIO_CFG_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h
deleted file mode 100644
index 1fe6917f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define GPIOCON_OFF	(0x00)
-#define GPIODAT_OFF	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-/* Define the core gpiolib support functions that the s3c platforms may
- * need to extend or change depending on the hardware and the s3c chip
- * selected at build or found at run time.
- *
- * These definitions are not intended for driver inclusion, there is
- * nothing here that should not live outside the platform and core
- * specific code.
-*/
-
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_pm - power management (suspend/resume) information
- * @save: Routine to save the state of the GPIO block
- * @resume: Routine to resume the GPIO block.
- */
-struct samsung_gpio_pm {
-	void (*save)(struct samsung_gpio_chip *chip);
-	void (*resume)(struct samsung_gpio_chip *chip);
-};
-
-struct samsung_gpio_cfg;
-
-/**
- * struct samsung_gpio_chip - wrapper for specific implementation of gpio
- * @chip: The chip structure to be exported via gpiolib.
- * @base: The base pointer to the gpio configuration registers.
- * @group: The group register number for gpio interrupt support.
- * @irq_base: The base irq number.
- * @config: special function and pull-resistor control information.
- * @lock: Lock for exclusive access to this gpio bank.
- * @pm_save: Save information for suspend/resume support.
- *
- * This wrapper provides the necessary information for the Samsung
- * specific gpios being registered with gpiolib.
- *
- * The lock protects each gpio bank from multiple access of the shared
- * configuration registers, or from reading of data whilst another thread
- * is writing to the register set.
- *
- * Each chip has its own lock to avoid any  contention between different
- * CPU cores trying to get one lock for different GPIO banks, where each
- * bank of GPIO has its own register space and configuration registers.
- */
-struct samsung_gpio_chip {
-	struct gpio_chip	chip;
-	struct samsung_gpio_cfg	*config;
-	struct samsung_gpio_pm	*pm;
-	void __iomem		*base;
-	int			irq_base;
-	int			group;
-	spinlock_t		 lock;
-#ifdef CONFIG_PM
-	u32			pm_save[4];
-#endif
-};
-
-static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
-{
-	return container_of(gpc, struct samsung_gpio_chip, chip);
-}
-
-/**
- * samsung_gpiolib_to_irq - convert gpio pin to irq number
- * @chip: The gpio chip that the pin belongs to.
- * @offset: The offset of the pin in the chip.
- *
- * This helper returns the irq number calculated from the chip->irq_base and
- * the provided offset.
- */
-extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
-
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
-{
-	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
-}
-#else
-/* machine specific code should provide samsung_gpiolib_getchip */
-
-#include <mach/gpio-track.h>
-
-static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
-#endif
-
-#ifdef CONFIG_PM
-extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
-#define __gpio_pm(x) x
-#else
-#define samsung_gpio_pm_1bit NULL
-#define samsung_gpio_pm_2bit NULL
-#define samsung_gpio_pm_4bit NULL
-#define __gpio_pm(x) NULL
-
-#endif /* CONFIG_PM */
-
-/* locking wrappers to deal with multiple access to the same gpio bank */
-#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h
deleted file mode 100644
index bab13920..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e442..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h
deleted file mode 100644
index f182669b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_CORE_H
-#define __ASM_ARCH_IIC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_i2c0_setname(char *name)
-{
-	/* currently this device is always compiled in */
-	s3c_device_i2c0.name = name;
-}
-
-static inline void s3c_i2c1_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C1
-	s3c_device_i2c1.name = name;
-#endif
-}
-
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
-	s3c_device_i2c2.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e76..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h
deleted file mode 100644
index a9331e49..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-uart.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c_uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
deleted file mode 100644
index 5b9c42fd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC IRQ VIC timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h
deleted file mode 100644
index e21a89bc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
-				   unsigned int parentbit,
-				   int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck)
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
-				     unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
-				      unsigned int parentmask,
-				      unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
-				  unsigned int parentmask,
-				  unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h
deleted file mode 100644
index df46b776..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_IRQS_H
-#define __PLAT_SAMSUNG_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET		(32)
-
-#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE		S5P_IRQ(0)
-#define S5P_VIC1_BASE		S5P_IRQ(32)
-#define S5P_VIC2_BASE		S5P_IRQ(64)
-#define S5P_VIC3_BASE		S5P_IRQ(96)
-
-#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE		S5P_VIC0_BASE
-#define IRQ_VIC1_BASE		S5P_VIC1_BASE
-#define IRQ_VIC2_BASE		S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
-
-#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
-
-#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
-#define IRQ_TIMER_COUNT		(5)
-
-#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
-					: ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
-						((irq) - S5P_EINT_BASE1) : \
-						((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
-   To avoid memory waste irq descriptors are allocated only for
-   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
-   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
-   to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE	8
-#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
-
-#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h
deleted file mode 100644
index d513e1b3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * Samsung keypad controller core function
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_KEYPAD_CORE_H
-#define __ASM_ARCH_KEYPAD_CORE_H
-
-/* These function are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void samsung_keypad_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-	samsung_device_keypad.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h
deleted file mode 100644
index c81ace33..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Samsung Platform - Keypad platform data definitions
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_KEYPAD_H
-#define __PLAT_SAMSUNG_KEYPAD_H
-
-#include <linux/input/samsung-keypad.h>
-
-/**
- * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with Samsung Keypad device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
-
-/* defined by architecture to configure gpio. */
-extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
-
-#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h
deleted file mode 100644
index 3ffac4d2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/map.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF6000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE	0xF6000000
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
-#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
-#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
-#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
-#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
-
-/* This is used for the CPU specific mappings that may be needed, so that
- * they do not need to directly used S3C_ADDR() and thus make it easier to
- * modify the space for mapping.
- */
-#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
-
-#endif /* __ASM_PLAT_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h
deleted file mode 100644
index c0c70a89..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S3C_H
-#define __ASM_PLAT_MAP_S3C_H __FILE__
-
-#define S3C24XX_VA_IRQ		S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
-#define S3C24XX_VA_UART		S3C_VA_UART
-
-#define S3C24XX_VA_TIMER	S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART		(0x50000000)
-#define S3C24XX_PA_UART		S3C2410_PA_UART
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
-/*
- * GPIO ports
- *
- * the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO		(0x56000000)
-#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
-
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
-
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-#define S3C24XX_VA_ISA_WORD	S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE	S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#include <plat/map-s5p.h>
-
-#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h
deleted file mode 100644
index c2d7bdae..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S5P_H
-#define __ASM_PLAT_MAP_S5P_H __FILE__
-
-#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
-#define S5P_VA_CMU		S3C_ADDR(0x02100000)
-#define S5P_VA_PMU		S3C_ADDR(0x02180000)
-#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
-#define S5P_VA_GPIO1		S5P_VA_GPIO
-#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
-#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
-
-#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
-#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
-
-#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
-#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
-
-#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
-#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-
-#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
-
-#define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
-#define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
-
-#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0			VA_VIC(0)
-#define VA_VIC1			VA_VIC(1)
-#define VA_VIC2			VA_VIC(2)
-#define VA_VIC3			VA_VIC(3)
-
-#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_VA_UART0		S5P_VA_UART(0)
-#define S5P_VA_UART1		S5P_VA_UART(1)
-#define S5P_VA_UART2		S5P_VA_UART(2)
-#define S5P_VA_UART3		S5P_VA_UART(3)
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
-#include <plat/map-s3c.h>
-
-#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d3171..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h
deleted file mode 100644
index ac132272..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_MFC_H
-#define __PLAT_SAMSUNG_MFC_H __FILE__
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase:	base address for MFC 'right' memory interface
- * @rsize:	size of the memory reserved for MFC 'right' interface
- * @lbase:	base address for MFC 'left' memory interface
- * @lsize:	size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h
deleted file mode 100644
index 6de20789..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/nand-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C -  Nand Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_NAND_CORE_H
-#define __ASM_ARCH_NAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_nand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_NAND
-	s3c_device_nand.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_NAND_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h
deleted file mode 100644
index 7701cb70..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/onenand-core.h
- *
- *  Copyright (c) 2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Samsung OneNAD Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ONENAND_CORE_H
-#define __ASM_ARCH_ONENAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_onenand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_ONENAND
-	s3c_device_onenand.name = name;
-#endif
-}
-
-static inline void s3c64xx_onenand1_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-	s3c64xx_device_onenand1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_ONENAND_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h
deleted file mode 100644
index abb4bc32..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pd.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_SAMSUNG_PD_H
-#define __ASM_PLAT_SAMSUNG_PD_H __FILE__
-
-struct samsung_pd_info {
-	int (*enable)(struct device *dev);
-	int (*disable)(struct device *dev);
-	void __iomem *base;
-};
-
-enum exynos4_pd_block {
-	PD_MFC,
-	PD_G3D,
-	PD_LCD0,
-	PD_LCD1,
-	PD_TV,
-	PD_CAM,
-	PD_GPS
-};
-
-#endif /* __ASM_PLAT_SAMSUNG_PD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h
deleted file mode 100644
index 357af7c1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h
+++ /dev/null
@@ -1,323 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pll.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL codes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/div64.h>
-
-#define S3C24XX_PLL_MDIV_MASK		(0xFF)
-#define S3C24XX_PLL_PDIV_MASK		(0x1F)
-#define S3C24XX_PLL_SDIV_MASK		(0x3)
-#define S3C24XX_PLL_MDIV_SHIFT		(12)
-#define S3C24XX_PLL_PDIV_SHIFT		(4)
-#define S3C24XX_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_MDIV_MASK		(0x3FF)
-#define S3C2416_PLL_PDIV_MASK		(0x3F)
-#define S3C2416_PLL_SDIV_MASK		(0x7)
-#define S3C2416_PLL_MDIV_SHIFT		(14)
-#define S3C2416_PLL_PDIV_SHIFT		(5)
-#define S3C2416_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c2416_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned int)fvco;
-}
-
-#define S3C6400_PLL_MDIV_MASK		(0x3FF)
-#define S3C6400_PLL_PDIV_MASK		(0x3F)
-#define S3C6400_PLL_SDIV_MASK		(0x7)
-#define S3C6400_PLL_MDIV_SHIFT		(16)
-#define S3C6400_PLL_PDIV_SHIFT		(8)
-#define S3C6400_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL6553X_MDIV_MASK	(0x7F)
-#define PLL6553X_PDIV_MASK	(0x1F)
-#define PLL6553X_SDIV_MASK	(0x3)
-#define PLL6553X_KDIV_MASK	(0xFFFF)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL35XX_MDIV_MASK	(0x3FF)
-#define PLL35XX_PDIV_MASK	(0x3F)
-#define PLL35XX_SDIV_MASK	(0x7)
-#define PLL35XX_MDIV_SHIFT	(16)
-#define PLL35XX_PDIV_SHIFT	(8)
-#define PLL35XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL36XX_KDIV_MASK	(0xFFFF)
-#define PLL36XX_MDIV_MASK	(0x1FF)
-#define PLL36XX_PDIV_MASK	(0x3F)
-#define PLL36XX_SDIV_MASK	(0x7)
-#define PLL36XX_MDIV_SHIFT	(16)
-#define PLL36XX_PDIV_SHIFT	(8)
-#define PLL36XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL45XX_MDIV_MASK	(0x3FF)
-#define PLL45XX_PDIV_MASK	(0x3F)
-#define PLL45XX_SDIV_MASK	(0x7)
-#define PLL45XX_MDIV_SHIFT	(16)
-#define PLL45XX_PDIV_SHIFT	(8)
-#define PLL45XX_SDIV_SHIFT	(0)
-
-enum pll45xx_type_t {
-	pll_4500,
-	pll_4502,
-	pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
-					    enum pll45xx_type_t pll_type)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
-	if (pll_type == pll_4508)
-		sdiv = sdiv - 1;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-/* CON0 bit-fields */
-#define PLL46XX_MDIV_MASK	(0x1FF)
-#define PLL46XX_PDIV_MASK	(0x3F)
-#define PLL46XX_SDIV_MASK	(0x7)
-#define PLL46XX_LOCKED_SHIFT	(29)
-#define PLL46XX_MDIV_SHIFT	(16)
-#define PLL46XX_PDIV_SHIFT	(8)
-#define PLL46XX_SDIV_SHIFT	(0)
-
-/* CON1 bit-fields */
-#define PLL46XX_MRR_MASK	(0x1F)
-#define PLL46XX_MFR_MASK	(0x3F)
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
-#define PLL46XX_MRR_SHIFT	(24)
-#define PLL46XX_MFR_SHIFT	(16)
-#define PLL46XX_KDIV_SHIFT	(0)
-
-enum pll46xx_type_t {
-	pll_4600,
-	pll_4650,
-	pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1,
-					    enum pll46xx_type_t pll_type)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	if (pll_type == pll_4650c)
-		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-	else
-		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	if (pll_type == pll_4600) {
-		tmp *= (mdiv << 16) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 16;
-	} else {
-		tmp *= (mdiv << 10) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 10;
-	}
-
-	return result;
-}
-
-#define PLL90XX_MDIV_MASK	(0xFF)
-#define PLL90XX_PDIV_MASK	(0x3F)
-#define PLL90XX_SDIV_MASK	(0x7)
-#define PLL90XX_KDIV_MASK	(0xffff)
-#define PLL90XX_LOCKED_SHIFT	(29)
-#define PLL90XX_MDIV_SHIFT	(16)
-#define PLL90XX_PDIV_SHIFT	(8)
-#define PLL90XX_SDIV_SHIFT	(0)
-#define PLL90XX_KDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
-					    u32 pll_con, u32 pll_conk)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
-	kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL65XX_MDIV_MASK	(0x3FF)
-#define PLL65XX_PDIV_MASK	(0x3F)
-#define PLL65XX_SDIV_MASK	(0x7)
-#define PLL65XX_MDIV_SHIFT	(16)
-#define PLL65XX_PDIV_SHIFT	(8)
-#define PLL65XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h
deleted file mode 100644
index 61fc5374..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#include <linux/irq.h>
-
-struct device;
-
-#ifdef CONFIG_PM
-
-extern __init int s3c_pm_init(void);
-extern __init int s3c64xx_pm_init(void);
-
-#else
-
-static inline int s3c_pm_init(void)
-{
-	return 0;
-}
-
-static inline int s3c64xx_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern int (*pm_cpu_sleep)(unsigned long);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
-
-/* from sleep.S */
-
-extern void s3c_cpu_resume(void);
-
-extern int s3c2410_cpu_suspend(unsigned long);
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
-	u32	ulcon;
-	u32	ucon;
-	u32	ufcon;
-	u32	umcon;
-	u32	ubrdiv;
-	u32	udivslot;
-};
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(void);
-extern void s3c24xx_irq_resume(void);
-#else
-#define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
-/* PM debug functions */
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-#else
-#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while(0)
-#define s3c_pm_check_restore() do { } while(0)
-#define s3c_pm_check_cleanup() do { } while(0)
-#define s3c_pm_check_store()   do { } while(0)
-#endif
-
-/**
- * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
- *
- * Setup all the necessary GPIO pins for waking the system on external
- * interrupt.
- */
-extern void s3c_pm_configure_extint(void);
-
-/**
- * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
- *
- * Restore the state of the GPIO pins after sleep, which may involve ensuring
- * that we do not glitch the state of the pins from that the bootloader's
- * resume code has done.
-*/
-extern void samsung_pm_restore_gpios(void);
-
-/**
- * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
- *
- * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
- */
-extern void samsung_pm_save_gpios(void);
-
-extern void s3c_pm_save_core(void);
-extern void s3c_pm_restore_core(void);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h
deleted file mode 100644
index bf6a60eb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_PWM_CLOCK_H
-#define __ASM_PLAT_PWM_CLOCK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	if (soc_is_s3c24xx())
-		return tcfg == S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s3c64xx() || soc_is_s5pc100())
-		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		return 0;
-	else
-		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	if (soc_is_s3c24xx())
-		return 1 << (tcfg1 + 1);
-	else
-		return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	if (soc_is_s3c24xx())
-		return 0;
-	else
-		return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	if (soc_is_s3c24xx())
-		return ilog2(div) - 1;
-	else
-		return ilog2(div);
-}
-#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h
deleted file mode 100644
index c3878f7a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
- *
- * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 AC97 Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H __FILE__
-
-#define S3C_AC97_GLBCTRL				(0x00)
-
-#define S3C_AC97_GLBCTRL_CODECREADYIE			(1<<22)
-#define S3C_AC97_GLBCTRL_PCMOUTURIE			(1<<21)
-#define S3C_AC97_GLBCTRL_PCMINORIE			(1<<20)
-#define S3C_AC97_GLBCTRL_MICINORIE			(1<<19)
-#define S3C_AC97_GLBCTRL_PCMOUTTIE			(1<<18)
-#define S3C_AC97_GLBCTRL_PCMINTIE			(1<<17)
-#define S3C_AC97_GLBCTRL_MICINTIE			(1<<16)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF			(0<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO			(1<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA			(2<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK			(3<<12)
-#define S3C_AC97_GLBCTRL_PCMINTM_OFF			(0<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_PIO			(1<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_DMA			(2<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_MASK			(3<<10)
-#define S3C_AC97_GLBCTRL_MICINTM_OFF			(0<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_PIO			(1<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_DMA			(2<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_MASK			(3<<8)
-#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE		(1<<3)
-#define S3C_AC97_GLBCTRL_ACLINKON			(1<<2)
-#define S3C_AC97_GLBCTRL_WARMRESET			(1<<1)
-#define S3C_AC97_GLBCTRL_COLDRESET			(1<<0)
-
-#define S3C_AC97_GLBSTAT				(0x04)
-
-#define S3C_AC97_GLBSTAT_CODECREADY			(1<<22)
-#define S3C_AC97_GLBSTAT_PCMOUTUR			(1<<21)
-#define S3C_AC97_GLBSTAT_PCMINORI			(1<<20)
-#define S3C_AC97_GLBSTAT_MICINORI			(1<<19)
-#define S3C_AC97_GLBSTAT_PCMOUTTI			(1<<18)
-#define S3C_AC97_GLBSTAT_PCMINTI			(1<<17)
-#define S3C_AC97_GLBSTAT_MICINTI			(1<<16)
-#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE			(0<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_INIT			(1<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_READY		(2<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE		(3<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_LP			(4<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_WARM			(5<<0)
-
-#define S3C_AC97_CODEC_CMD				(0x08)
-
-#define S3C_AC97_CODEC_CMD_READ				(1<<23)
-
-#define S3C_AC97_STAT					(0x0c)
-#define S3C_AC97_PCM_ADDR				(0x10)
-#define S3C_AC97_PCM_DATA				(0x18)
-#define S3C_AC97_MIC_DATA				(0x1C)
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h
deleted file mode 100644
index 70612100..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
-#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
-#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
-#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
-#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
-
-
-/* ADCCON Register Bits */
-#define S3C64XX_ADCCON_RESSEL		(1<<16)
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2416_ADCCON_RESSEL		(1 << 3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h
deleted file mode 100644
index f5df92fd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_ATA_H
-#define __ASM_PLAT_REGS_ATA_H __FILE__
-
-#define S3C_CFATA_REG(x)	(x)
-
-#define S3C_CFATA_MUX		S3C_CFATA_REG(0x0)
-
-#define S3C_ATA_CTRL		S3C_CFATA_REG(0x0)
-#define S3C_ATA_STATUS		S3C_CFATA_REG(0x4)
-#define S3C_ATA_CMD		S3C_CFATA_REG(0x8)
-#define S3C_ATA_SWRST		S3C_CFATA_REG(0xc)
-#define S3C_ATA_IRQ		S3C_CFATA_REG(0x10)
-#define S3C_ATA_IRQ_MSK		S3C_CFATA_REG(0x14)
-#define S3C_ATA_CFG		S3C_CFATA_REG(0x18)
-
-#define S3C_ATA_MDMA_TIME	S3C_CFATA_REG(0x28)
-#define S3C_ATA_PIO_TIME	S3C_CFATA_REG(0x2c)
-#define S3C_ATA_UDMA_TIME	S3C_CFATA_REG(0x30)
-#define S3C_ATA_XFR_NUM		S3C_CFATA_REG(0x34)
-#define S3C_ATA_XFR_CNT		S3C_CFATA_REG(0x38)
-#define S3C_ATA_TBUF_START	S3C_CFATA_REG(0x3c)
-#define S3C_ATA_TBUF_SIZE	S3C_CFATA_REG(0x40)
-#define S3C_ATA_SBUF_START	S3C_CFATA_REG(0x44)
-#define S3C_ATA_SBUF_SIZE	S3C_CFATA_REG(0x48)
-#define S3C_ATA_CADR_TBUF	S3C_CFATA_REG(0x4c)
-#define S3C_ATA_CADR_SBUF	S3C_CFATA_REG(0x50)
-#define S3C_ATA_PIO_DTR		S3C_CFATA_REG(0x54)
-#define S3C_ATA_PIO_FED		S3C_CFATA_REG(0x58)
-#define S3C_ATA_PIO_SCR		S3C_CFATA_REG(0x5c)
-#define S3C_ATA_PIO_LLR		S3C_CFATA_REG(0x60)
-#define S3C_ATA_PIO_LMR		S3C_CFATA_REG(0x64)
-#define S3C_ATA_PIO_LHR		S3C_CFATA_REG(0x68)
-#define S3C_ATA_PIO_DVR		S3C_CFATA_REG(0x6c)
-#define S3C_ATA_PIO_CSD		S3C_CFATA_REG(0x70)
-#define S3C_ATA_PIO_DAD		S3C_CFATA_REG(0x74)
-#define S3C_ATA_PIO_READY	S3C_CFATA_REG(0x78)
-#define S3C_ATA_PIO_RDATA	S3C_CFATA_REG(0x7c)
-
-#define S3C_CFATA_MUX_TRUEIDE	0x01
-
-#define S3C_ATA_CFG_SWAP	0x40
-#define S3C_ATA_CFG_IORDYEN	0x02
-
-#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h
deleted file mode 100644
index a7d622ef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_DMA_H
-#define __ASM_PLAT_REGS_DMA_H __FILE__
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1 << 0)
-#define S3C2410_DISRCC_APB		(1 << 1)
-
-#define S3C2410_DMASKTRIG_STOP		(1 << 2)
-#define S3C2410_DMASKTRIG_ON		(1 << 1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
-
-#define S3C2410_DCON_DEMAND		(0 << 31)
-#define S3C2410_DCON_HANDSHAKE		(1 << 31)
-#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
-#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
-
-#define S3C2410_DCON_INTREQ		(1 << 29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
-#define S3C2410_DCON_CH0_UART0		(1 << 24)
-#define S3C2410_DCON_CH0_SDI		(2 << 24)
-#define S3C2410_DCON_CH0_TIMER		(3 << 24)
-#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
-#define S3C2410_DCON_CH1_UART1		(1 << 24)
-#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
-#define S3C2410_DCON_CH1_SPI		(3 << 24)
-#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
-#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
-#define S3C2410_DCON_CH2_SDI		(2 << 24)
-#define S3C2410_DCON_CH2_TIMER		(3 << 24)
-#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
-
-#define S3C2410_DCON_CH3_UART2		(0 << 24)
-#define S3C2410_DCON_CH3_SDI		(1 << 24)
-#define S3C2410_DCON_CH3_SPI		(2 << 24)
-#define S3C2410_DCON_CH3_TIMER		(3 << 24)
-#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7 << 24)
-
-#define S3C2410_DCON_BYTE		(0 << 20)
-#define S3C2410_DCON_HALFWORD		(1 << 20)
-#define S3C2410_DCON_WORD		(2 << 20)
-
-#define S3C2410_DCON_AUTORELOAD		(0 << 22)
-#define S3C2410_DCON_NORELOAD		(1 << 22)
-#define S3C2410_DCON_HWTRIG		(1 << 23)
-
-#ifdef CONFIG_CPU_S3C2440
-
-#define S3C2440_DIDSTC_CHKINT		(1 << 2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
-#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
-#define S3C2440_DCON_CH1_SDI		(6 << 24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
-#define S3C2440_DCON_CH2_MICIN		(6 << 24)
-
-#define S3C2440_DCON_CH3_MICIN		(5 << 24)
-#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-#endif /* CONFIG_CPU_S3C2412 */
-
-#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443)
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-#endif /* CONFIG_CPU_S3C2443 */
-
-#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
deleted file mode 100644
index 4c3647f8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_BASE				(0x40)
-
-#define VIDINTCON0				(0x130)
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-/* Palette control */
-/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
- * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
-
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h
deleted file mode 100644
index 9a78012d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
- * S3C64XX series such as the S3C6400 and S3C6410.
- *
- * The file does not contain the cpu specific items which are based on
- * whichever architecture is selected, it only contains the core of the
- * register set. See <mach/regs-fb.h> to get the specifics.
- *
- * Note, we changed to using regs-fb.h as it avoids any clashes with
- * the original regs-lcd.h so out of the way of regs-lcd.h as well as
- * indicating the newer block is much more than just an LCD interface.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Please do not include this file directly, use <mach/regs-fb.h> to
- * ensure all the localised SoC support is included as necessary.
-*/
-
-/* VIDCON0 */
-
-#define VIDCON0					(0x00)
-#define VIDCON0_INTERLACE			(1 << 29)
-#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
-#define VIDCON0_VIDOUT_SHIFT			(26)
-#define VIDCON0_VIDOUT_RGB			(0x0 << 26)
-#define VIDCON0_VIDOUT_TV			(0x1 << 26)
-#define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
-#define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
-
-#define VIDCON0_L1_DATA_MASK			(0x7 << 23)
-#define VIDCON0_L1_DATA_SHIFT			(23)
-#define VIDCON0_L1_DATA_16BPP			(0x0 << 23)
-#define VIDCON0_L1_DATA_18BPP16			(0x1 << 23)
-#define VIDCON0_L1_DATA_18BPP9			(0x2 << 23)
-#define VIDCON0_L1_DATA_24BPP			(0x3 << 23)
-#define VIDCON0_L1_DATA_18BPP			(0x4 << 23)
-#define VIDCON0_L1_DATA_16BPP8			(0x5 << 23)
-
-#define VIDCON0_L0_DATA_MASK			(0x7 << 20)
-#define VIDCON0_L0_DATA_SHIFT			(20)
-#define VIDCON0_L0_DATA_16BPP			(0x0 << 20)
-#define VIDCON0_L0_DATA_18BPP16			(0x1 << 20)
-#define VIDCON0_L0_DATA_18BPP9			(0x2 << 20)
-#define VIDCON0_L0_DATA_24BPP			(0x3 << 20)
-#define VIDCON0_L0_DATA_18BPP			(0x4 << 20)
-#define VIDCON0_L0_DATA_16BPP8			(0x5 << 20)
-
-#define VIDCON0_PNRMODE_MASK			(0x3 << 17)
-#define VIDCON0_PNRMODE_SHIFT			(17)
-#define VIDCON0_PNRMODE_RGB			(0x0 << 17)
-#define VIDCON0_PNRMODE_BGR			(0x1 << 17)
-#define VIDCON0_PNRMODE_SERIAL_RGB		(0x2 << 17)
-#define VIDCON0_PNRMODE_SERIAL_BGR		(0x3 << 17)
-
-#define VIDCON0_CLKVALUP			(1 << 16)
-#define VIDCON0_CLKVAL_F_MASK			(0xff << 6)
-#define VIDCON0_CLKVAL_F_SHIFT			(6)
-#define VIDCON0_CLKVAL_F_LIMIT			(0xff)
-#define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
-#define VIDCON0_VLCKFREE			(1 << 5)
-#define VIDCON0_CLKDIR				(1 << 4)
-
-#define VIDCON0_CLKSEL_MASK			(0x3 << 2)
-#define VIDCON0_CLKSEL_SHIFT			(2)
-#define VIDCON0_CLKSEL_HCLK			(0x0 << 2)
-#define VIDCON0_CLKSEL_LCD			(0x1 << 2)
-#define VIDCON0_CLKSEL_27M			(0x3 << 2)
-
-#define VIDCON0_ENVID				(1 << 1)
-#define VIDCON0_ENVID_F				(1 << 0)
-
-#define VIDCON1					(0x04)
-#define VIDCON1_LINECNT_MASK			(0x7ff << 16)
-#define VIDCON1_LINECNT_SHIFT			(16)
-#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
-#define VIDCON1_VSTATUS_MASK			(0x3 << 13)
-#define VIDCON1_VSTATUS_SHIFT			(13)
-#define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
-#define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
-#define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
-#define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
-#define VIDCON1_VCLK_MASK			(0x3 << 9)
-#define VIDCON1_VCLK_HOLD			(0x0 << 9)
-#define VIDCON1_VCLK_RUN			(0x1 << 9)
-
-#define VIDCON1_INV_VCLK			(1 << 7)
-#define VIDCON1_INV_HSYNC			(1 << 6)
-#define VIDCON1_INV_VSYNC			(1 << 5)
-#define VIDCON1_INV_VDEN			(1 << 4)
-
-/* VIDCON2 */
-
-#define VIDCON2					(0x08)
-#define VIDCON2_EN601				(1 << 23)
-#define VIDCON2_TVFMTSEL_SW			(1 << 14)
-
-#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
-#define VIDCON2_TVFMTSEL1_SHIFT			(12)
-#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
-#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
-#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
-
-#define VIDCON2_ORGYCbCr			(1 << 8)
-#define VIDCON2_YUVORDCrCb			(1 << 7)
-
-/* PRTCON (S3C6410, S5PC100)
- * Might not be present in the S3C6410 documentation,
- * but tests prove it's there almost for sure; shouldn't hurt in any case.
- */
-#define PRTCON					(0x0c)
-#define PRTCON_PROTECT				(1 << 11)
-
-/* VIDTCON0 */
-
-#define VIDTCON0_VBPDE_MASK			(0xff << 24)
-#define VIDTCON0_VBPDE_SHIFT			(24)
-#define VIDTCON0_VBPDE_LIMIT			(0xff)
-#define VIDTCON0_VBPDE(_x)			((_x) << 24)
-
-#define VIDTCON0_VBPD_MASK			(0xff << 16)
-#define VIDTCON0_VBPD_SHIFT			(16)
-#define VIDTCON0_VBPD_LIMIT			(0xff)
-#define VIDTCON0_VBPD(_x)			((_x) << 16)
-
-#define VIDTCON0_VFPD_MASK			(0xff << 8)
-#define VIDTCON0_VFPD_SHIFT			(8)
-#define VIDTCON0_VFPD_LIMIT			(0xff)
-#define VIDTCON0_VFPD(_x)			((_x) << 8)
-
-#define VIDTCON0_VSPW_MASK			(0xff << 0)
-#define VIDTCON0_VSPW_SHIFT			(0)
-#define VIDTCON0_VSPW_LIMIT			(0xff)
-#define VIDTCON0_VSPW(_x)			((_x) << 0)
-
-/* VIDTCON1 */
-
-#define VIDTCON1_VFPDE_MASK			(0xff << 24)
-#define VIDTCON1_VFPDE_SHIFT			(24)
-#define VIDTCON1_VFPDE_LIMIT			(0xff)
-#define VIDTCON1_VFPDE(_x)			((_x) << 24)
-
-#define VIDTCON1_HBPD_MASK			(0xff << 16)
-#define VIDTCON1_HBPD_SHIFT			(16)
-#define VIDTCON1_HBPD_LIMIT			(0xff)
-#define VIDTCON1_HBPD(_x)			((_x) << 16)
-
-#define VIDTCON1_HFPD_MASK			(0xff << 8)
-#define VIDTCON1_HFPD_SHIFT			(8)
-#define VIDTCON1_HFPD_LIMIT			(0xff)
-#define VIDTCON1_HFPD(_x)			((_x) << 8)
-
-#define VIDTCON1_HSPW_MASK			(0xff << 0)
-#define VIDTCON1_HSPW_SHIFT			(0)
-#define VIDTCON1_HSPW_LIMIT			(0xff)
-#define VIDTCON1_HSPW(_x)			((_x) << 0)
-
-#define VIDTCON2				(0x18)
-#define VIDTCON2_LINEVAL_E(_x)			((((_x) & 0x800) >> 11) << 23)
-#define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
-#define VIDTCON2_LINEVAL_SHIFT			(11)
-#define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
-#define VIDTCON2_LINEVAL(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDTCON2_HOZVAL_E(_x)			((((_x) & 0x800) >> 11) << 22)
-#define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
-#define VIDTCON2_HOZVAL_SHIFT			(0)
-#define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
-#define VIDTCON2_HOZVAL(_x)			(((_x) & 0x7ff) << 0)
-
-/* WINCONx */
-
-
-#define WINCONx_BITSWP				(1 << 18)
-#define WINCONx_BYTSWP				(1 << 17)
-#define WINCONx_HAWSWP				(1 << 16)
-#define WINCONx_WSWP				(1 << 15)
-#define WINCONx_BURSTLEN_MASK			(0x3 << 9)
-#define WINCONx_BURSTLEN_SHIFT			(9)
-#define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
-#define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
-#define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
-
-#define WINCONx_ENWIN				(1 << 0)
-#define WINCON0_BPPMODE_MASK			(0xf << 2)
-#define WINCON0_BPPMODE_SHIFT			(2)
-#define WINCON0_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON0_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON0_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON0_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON0_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON0_BPPMODE_16BPP_1555		(0x7 << 2)
-#define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
-
-#define WINCON1_BLD_PIX				(1 << 6)
-
-#define WINCON1_ALPHA_SEL			(1 << 1)
-#define WINCON1_BPPMODE_MASK			(0xf << 2)
-#define WINCON1_BPPMODE_SHIFT			(2)
-#define WINCON1_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON1_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON1_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON1_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON1_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON1_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON1_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON1_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON1_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON1_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON1_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON1_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
-
-/* S5PV210 */
-#define SHADOWCON				(0x34)
-#define SHADOWCON_WINx_PROTECT(_win)		(1 << (10 + (_win)))
-/* DMA channels (all windows) */
-#define SHADOWCON_CHx_ENABLE(_win)		(1 << (_win))
-/* Local input channels (windows 0-2) */
-#define SHADOWCON_CHx_LOCAL_ENABLE(_win)	(1 << (5 + (_win)))
-
-#define VIDOSDxA_TOPLEFT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
-#define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
-#define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
-#define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_X(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDOSDxA_TOPLEFT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
-#define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
-#define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
-#define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_Y(_x)			(((_x) & 0x7ff) << 0)
-
-#define VIDOSDxB_BOTRIGHT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
-#define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
-#define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
-#define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_X(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDOSDxB_BOTRIGHT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
-#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
-#define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
-#define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_Y(_x)			(((_x) & 0x7ff) << 0)
-
-/* For VIDOSD[1..4]C */
-#define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
-#define VIDISD14C_ALPHA0_G_MASK			(0xf << 16)
-#define VIDISD14C_ALPHA0_G_SHIFT		(16)
-#define VIDISD14C_ALPHA0_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_G(_x)			((_x) << 16)
-#define VIDISD14C_ALPHA0_B_MASK			(0xf << 12)
-#define VIDISD14C_ALPHA0_B_SHIFT		(12)
-#define VIDISD14C_ALPHA0_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_B(_x)			((_x) << 12)
-#define VIDISD14C_ALPHA1_R_MASK			(0xf << 8)
-#define VIDISD14C_ALPHA1_R_SHIFT		(8)
-#define VIDISD14C_ALPHA1_R_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_R(_x)			((_x) << 8)
-#define VIDISD14C_ALPHA1_G_MASK			(0xf << 4)
-#define VIDISD14C_ALPHA1_G_SHIFT		(4)
-#define VIDISD14C_ALPHA1_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_G(_x)			((_x) << 4)
-#define VIDISD14C_ALPHA1_B_MASK			(0xf << 0)
-#define VIDISD14C_ALPHA1_B_SHIFT		(0)
-#define VIDISD14C_ALPHA1_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_B(_x)			((_x) << 0)
-
-/* Video buffer addresses */
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDW_BUF_SIZE_OFFSET_E(_x)		((((_x) & 0x2000) >> 13) << 27)
-#define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
-#define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
-#define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_OFFSET(_x)		(((_x) & 0x1fff) << 13)
-
-#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x)		((((_x) & 0x2000) >> 13) << 26)
-#define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		(((_x) & 0x1fff) << 0)
-
-/* Interrupt controls and status */
-
-#define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
-#define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
-#define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
-#define VIDINTCON0_FIFOINTERVAL(_x)		((_x) << 20)
-
-#define VIDINTCON0_INT_SYSMAINCON		(1 << 19)
-#define VIDINTCON0_INT_SYSSUBCON		(1 << 18)
-#define VIDINTCON0_INT_I80IFDONE		(1 << 17)
-
-#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
-#define VIDINTCON0_FRAMESEL0_SHIFT		(15)
-#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
-#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
-#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
-#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
-
-#define VIDINTCON0_FRAMESEL1			(1 << 13)
-#define VIDINTCON0_FRAMESEL1_MASK		(0x3 << 13)
-#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 13)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 13)
-#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 13)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 13)
-
-#define VIDINTCON0_INT_FRAME			(1 << 12)
-#define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
-#define VIDINTCON0_FIFIOSEL_SHIFT		(5)
-#define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
-
-#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
-#define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
-#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x0 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x1 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO75PC		(0x2 << 2)
-#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x3 << 2)
-#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 2)
-
-#define VIDINTCON0_INT_FIFO_MASK		(0x3 << 0)
-#define VIDINTCON0_INT_FIFO_SHIFT		(0)
-#define VIDINTCON0_INT_ENABLE			(1 << 0)
-
-#define VIDINTCON1				(0x134)
-#define VIDINTCON1_INT_I180			(1 << 2)
-#define VIDINTCON1_INT_FRAME			(1 << 1)
-#define VIDINTCON1_INT_FIFO			(1 << 0)
-
-/* Window colour-key control registers */
-#define WKEYCON					(0x140)	/* 6410,V210 */
-
-#define WKEYCON0				(0x00)
-#define WKEYCON1				(0x04)
-
-#define WxKEYCON0_KEYBL_EN			(1 << 26)
-#define WxKEYCON0_KEYEN_F			(1 << 25)
-#define WxKEYCON0_DIRCON			(1 << 24)
-#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
-#define WxKEYCON0_COMPKEY_SHIFT			(0)
-#define WxKEYCON0_COMPKEY_LIMIT			(0xffffff)
-#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
-#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
-#define WxKEYCON1_COLVAL_SHIFT			(0)
-#define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
-#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
-
-
-/* Window blanking (MAP) */
-
-#define WINxMAP_MAP				(1 << 24)
-#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
-#define WINxMAP_MAP_COLOUR_SHIFT		(0)
-#define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
-#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
-
-#define WPALCON_PAL_UPDATE			(1 << 9)
-#define WPALCON_W1PAL_MASK			(0x7 << 3)
-#define WPALCON_W1PAL_SHIFT			(3)
-#define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
-#define WPALCON_W1PAL_24BPP			(0x1 << 3)
-#define WPALCON_W1PAL_19BPP_A666		(0x2 << 3)
-#define WPALCON_W1PAL_18BPP_A665		(0x3 << 3)
-#define WPALCON_W1PAL_18BPP			(0x4 << 3)
-#define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
-#define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
-
-#define WPALCON_W0PAL_MASK			(0x7 << 0)
-#define WPALCON_W0PAL_SHIFT			(0)
-#define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
-#define WPALCON_W0PAL_24BPP			(0x1 << 0)
-#define WPALCON_W0PAL_19BPP_A666		(0x2 << 0)
-#define WPALCON_W0PAL_18BPP_A665		(0x3 << 0)
-#define WPALCON_W0PAL_18BPP			(0x4 << 0)
-#define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
-#define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
-
-/* Blending equation control */
-#define BLENDCON				(0x260)
-#define BLENDCON_NEW_MASK			(1 << 0)
-#define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
-#define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17de..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h
deleted file mode 100644
index a18d35e7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON			(0x00)
-
-#define S3C2410_IISCON_LRINDEX		(1 << 8)
-#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
-#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
-#define S3C2410_IISCON_TXDMAEN		(1 << 5)
-#define S3C2410_IISCON_RXDMAEN		(1 << 4)
-#define S3C2410_IISCON_TXIDLE		(1 << 3)
-#define S3C2410_IISCON_RXIDLE		(1 << 2)
-#define S3C2410_IISCON_PSCEN		(1 << 1)
-#define S3C2410_IISCON_IISEN		(1 << 0)
-
-#define S3C2410_IISMOD			(0x04)
-
-#define S3C2440_IISMOD_MPLL		(1 << 9)
-#define S3C2410_IISMOD_SLAVE		(1 << 8)
-#define S3C2410_IISMOD_NOXFER		(0 << 6)
-#define S3C2410_IISMOD_RXMODE		(1 << 6)
-#define S3C2410_IISMOD_TXMODE		(2 << 6)
-#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
-#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
-#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
-#define S3C2410_IISMOD_IIS		(0 << 4)
-#define S3C2410_IISMOD_MSB		(1 << 4)
-#define S3C2410_IISMOD_8BIT		(0 << 3)
-#define S3C2410_IISMOD_16BIT		(1 << 3)
-#define S3C2410_IISMOD_BITMASK		(1 << 3)
-#define S3C2410_IISMOD_256FS		(0 << 2)
-#define S3C2410_IISMOD_384FS		(1 << 2)
-#define S3C2410_IISMOD_16FS		(0 << 0)
-#define S3C2410_IISMOD_32FS		(1 << 0)
-#define S3C2410_IISMOD_48FS		(2 << 0)
-#define S3C2410_IISMOD_FS_MASK		(3 << 0)
-
-#define S3C2410_IISPSR			(0x08)
-
-#define S3C2410_IISPSR_INTMASK		(31 << 5)
-#define S3C2410_IISPSR_INTSHIFT		(5)
-#define S3C2410_IISPSR_EXTMASK		(31 << 0)
-#define S3C2410_IISPSR_EXTSHFIT		(0)
-
-#define S3C2410_IISFCON			(0x0c)
-
-#define S3C2410_IISFCON_TXDMA		(1 << 15)
-#define S3C2410_IISFCON_RXDMA		(1 << 14)
-#define S3C2410_IISFCON_TXENABLE	(1 << 13)
-#define S3C2410_IISFCON_RXENABLE	(1 << 12)
-#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT		(6)
-#define S3C2410_IISFCON_RXMASK		(0x3f)
-#define S3C2410_IISFCON_RXSHIFT		(0)
-
-#define S3C2410_IISFIFO			(0x10)
-
-#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h
deleted file mode 100644
index c63cd3fc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C - IRQ detection types.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
- * the S3C64XX
-*/
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h
deleted file mode 100644
index 238efea7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 NAND register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND
-
-
-#define S3C2410_NFREG(x) (x)
-
-#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
-#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
-#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
-#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
-#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
-#define S3C2410_NFECC   S3C2410_NFREG(0x14)
-
-#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
-#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
-#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
-#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
-#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
-#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
-#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
-#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
-#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
-#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
-#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
-#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
-#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
-#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
-
-#define S3C2412_NFSBLK		S3C2410_NFREG(0x20)
-#define S3C2412_NFEBLK		S3C2410_NFREG(0x24)
-#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
-#define S3C2412_NFMECC_ERR0	S3C2410_NFREG(0x2C)
-#define S3C2412_NFMECC_ERR1	S3C2410_NFREG(0x30)
-#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
-#define S3C2412_NFMECC1		S3C2410_NFREG(0x38)
-#define S3C2412_NFSECC		S3C2410_NFREG(0x3C)
-
-#define S3C2410_NFCONF_EN          (1<<15)
-#define S3C2410_NFCONF_512BYTE     (1<<14)
-#define S3C2410_NFCONF_4STEP       (1<<13)
-#define S3C2410_NFCONF_INITECC     (1<<12)
-#define S3C2410_NFCONF_nFCE        (1<<11)
-#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
-
-#define S3C2410_NFSTAT_BUSY        (1<<0)
-
-#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
-#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
-#define S3C2440_NFCONF_ADVFLASH		(1<<3)
-#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
-#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
-#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
-
-#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
-#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
-#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
-#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
-#define S3C2440_NFCONT_RN_FALLING	(1<<8)
-#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
-#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
-#define S3C2440_NFCONT_INITECC		(1<<4)
-#define S3C2440_NFCONT_nFCE		(1<<1)
-#define S3C2440_NFCONT_ENABLE		(1<<0)
-
-#define S3C2440_NFSTAT_READY		(1<<0)
-#define S3C2440_NFSTAT_nCE		(1<<1)
-#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
-#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
-
-#define S3C2412_NFCONF_NANDBOOT		(1<<31)
-#define S3C2412_NFCONF_ECCCLKCON	(1<<30)
-#define S3C2412_NFCONF_ECC_MLC		(1<<24)
-#define S3C2412_NFCONF_TACLS_MASK	(7<<12)	/* 1 extra bit of Tacls */
-
-#define S3C2412_NFCONT_ECC4_DIRWR	(1<<18)
-#define S3C2412_NFCONT_LOCKTIGHT	(1<<17)
-#define S3C2412_NFCONT_SOFTLOCK		(1<<16)
-#define S3C2412_NFCONT_ECC4_ENCINT	(1<<13)
-#define S3C2412_NFCONT_ECC4_DECINT	(1<<12)
-#define S3C2412_NFCONT_MAIN_ECC_LOCK	(1<<7)
-#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
-#define S3C2412_NFCONT_nFCE1		(1<<2)
-#define S3C2412_NFCONT_nFCE0		(1<<1)
-
-#define S3C2412_NFSTAT_ECC_ENCDONE	(1<<7)
-#define S3C2412_NFSTAT_ECC_DECDONE	(1<<6)
-#define S3C2412_NFSTAT_ILLEGAL_ACCESS	(1<<5)
-#define S3C2412_NFSTAT_RnB_CHANGE	(1<<4)
-#define S3C2412_NFSTAT_nFCE1		(1<<3)
-#define S3C2412_NFSTAT_nFCE0		(1<<2)
-#define S3C2412_NFSTAT_Res1		(1<<1)
-#define S3C2412_NFSTAT_READY		(1<<0)
-
-#define S3C2412_NFECCERR_SERRDATA(x)	(((x) >> 21) & 0xf)
-#define S3C2412_NFECCERR_SERRBIT(x)	(((x) >> 18) & 0x7)
-#define S3C2412_NFECCERR_MERRDATA(x)	(((x) >> 7) & 0x3ff)
-#define S3C2412_NFECCERR_MERRBIT(x)	(((x) >> 4) & 0x7)
-#define S3C2412_NFECCERR_SPARE_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_MAIN_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_NONE		(0)
-#define S3C2412_NFECCERR_1BIT		(1)
-#define S3C2412_NFECCERR_MULTIBIT	(2)
-#define S3C2412_NFECCERR_ECCAREA	(3)
-
-
-
-#endif /* __ASM_ARM_REGS_NAND */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h
deleted file mode 100644
index 930ea8b8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
- *
- *  Copyright (C) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __SAMSUNG_ONENAND_H__
-#define __SAMSUNG_ONENAND_H__
-
-#include <mach/hardware.h>
-
-/*
- * OneNAND Controller
- */
-#define MEM_CFG_OFFSET		0x0000
-#define BURST_LEN_OFFSET	0x0010
-#define MEM_RESET_OFFSET	0x0020
-#define INT_ERR_STAT_OFFSET	0x0030
-#define INT_ERR_MASK_OFFSET	0x0040
-#define INT_ERR_ACK_OFFSET	0x0050
-#define ECC_ERR_STAT_OFFSET	0x0060
-#define MANUFACT_ID_OFFSET	0x0070
-#define DEVICE_ID_OFFSET	0x0080
-#define DATA_BUF_SIZE_OFFSET	0x0090
-#define BOOT_BUF_SIZE_OFFSET	0x00A0
-#define BUF_AMOUNT_OFFSET	0x00B0
-#define TECH_OFFSET		0x00C0
-#define FBA_WIDTH_OFFSET	0x00D0
-#define FPA_WIDTH_OFFSET	0x00E0
-#define FSA_WIDTH_OFFSET	0x00F0
-#define TRANS_SPARE_OFFSET	0x0140
-#define DBS_DFS_WIDTH_OFFSET	0x0160
-#define INT_PIN_ENABLE_OFFSET	0x01A0
-#define ACC_CLOCK_OFFSET	0x01C0
-#define FLASH_VER_ID_OFFSET	0x01F0
-#define FLASH_AUX_CNTRL_OFFSET	0x0300		/* s3c64xx only */
-
-#define ONENAND_MEM_RESET_HOT	0x3
-#define ONENAND_MEM_RESET_COLD	0x2
-#define ONENAND_MEM_RESET_WARM	0x1
-
-#define CACHE_OP_ERR		(1 << 13)
-#define RST_CMP			(1 << 12)
-#define RDY_ACT			(1 << 11)
-#define INT_ACT			(1 << 10)
-#define UNSUP_CMD		(1 << 9)
-#define LOCKED_BLK		(1 << 8)
-#define BLK_RW_CMP		(1 << 7)
-#define ERS_CMP			(1 << 6)
-#define PGM_CMP			(1 << 5)
-#define LOAD_CMP		(1 << 4)
-#define ERS_FAIL		(1 << 3)
-#define PGM_FAIL		(1 << 2)
-#define INT_TO			(1 << 1)
-#define LD_FAIL_ECC_ERR		(1 << 0)
-
-#define TSRF			(1 << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h
deleted file mode 100644
index 0f8263e9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Internal RTC register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_RTC_H
-#define __ASM_ARCH_REGS_RTC_H __FILE__
-
-#define S3C2410_RTCREG(x) (x)
-#define S3C2410_INTP		S3C2410_RTCREG(0x30)
-#define S3C2410_INTP_ALM	(1 << 1)
-#define S3C2410_INTP_TIC	(1 << 0)
-
-#define S3C2410_RTCCON		S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN	(1 << 0)
-#define S3C2410_RTCCON_CNTSEL	(1 << 2)
-#define S3C2410_RTCCON_CLKRST	(1 << 3)
-#define S3C2443_RTCCON_TICSEL	(1 << 4)
-#define S3C64XX_RTCCON_TICEN	(1 << 8)
-
-#define S3C2410_TICNT		S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE	(1 << 7)
-
-/* S3C2443: tick count is 15 bit wide
- * TICNT[6:0] contains upper 7 bits
- * TICNT1[7:0] contains lower 8 bits
- */
-#define S3C2443_TICNT_PART(x)	((x & 0x7f00) >> 8)
-#define S3C2443_TICNT1		S3C2410_RTCREG(0x4C)
-#define S3C2443_TICNT1_PART(x)	(x & 0xff)
-
-/* S3C2416: tick count is 32 bit wide
- * TICNT[6:0] contains bits [14:8]
- * TICNT1[7:0] contains lower 8 bits
- * TICNT2[16:0] contains upper 17 bits
- */
-#define S3C2416_TICNT2		S3C2410_RTCREG(0x48)
-#define S3C2416_TICNT2_PART(x)	((x & 0xffff8000) >> 15)
-
-#define S3C2410_RTCALM		S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN	(1 << 6)
-#define S3C2410_RTCALM_YEAREN	(1 << 5)
-#define S3C2410_RTCALM_MONEN	(1 << 4)
-#define S3C2410_RTCALM_DAYEN	(1 << 3)
-#define S3C2410_RTCALM_HOUREN	(1 << 2)
-#define S3C2410_RTCALM_MINEN	(1 << 1)
-#define S3C2410_RTCALM_SECEN	(1 << 0)
-
-#define S3C2410_ALMSEC		S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN		S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR		S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE		S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON		S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR		S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCSEC		S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN		S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR		S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE		S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCMON		S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR		S3C2410_RTCREG(0x88)
-
-#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h
deleted file mode 100644
index e34049ad..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_REGS_H
-#define __PLAT_S3C_SDHCI_REGS_H __FILE__
-
-#define S3C_SDHCI_CONTROL2			(0x80)
-#define S3C_SDHCI_CONTROL3			(0x84)
-#define S3C64XX_SDHCI_CONTROL4			(0x8C)
-
-#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
-#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
-#define S3C_SDHCI_CTRL2_CDINVRXD3		(1 << 29)
-#define S3C_SDHCI_CTRL2_SLCARDOUT		(1 << 28)
-
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
-#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
-#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
-#define S3C_SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
-#define S3C_SDHCI_CTRL2_SDCDSEL			(1 << 13)
-#define S3C_SDHCI_CTRL2_SDSIGPC			(1 << 12)
-#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
-
-#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
-#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
-
-#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		(1 << 8)
-#define S3C_SDHCI_CTRL2_RWAITMODE		(1 << 7)
-#define S3C_SDHCI_CTRL2_DISBUFRD		(1 << 6)
-#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
-#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
-#define S3C_SDHCI_CTRL2_PWRSYNC			(1 << 3)
-#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		(1 << 1)
-#define S3C_SDHCI_CTRL2_HWINITFIN		(1 << 0)
-
-#define S3C_SDHCI_CTRL3_FCSEL3			(1 << 31)
-#define S3C_SDHCI_CTRL3_FCSEL2			(1 << 23)
-#define S3C_SDHCI_CTRL3_FCSEL1			(1 << 15)
-#define S3C_SDHCI_CTRL3_FCSEL0			(1 << 7)
-
-#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
-#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
-#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
-#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
-#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
-#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
-#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
-
-#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
-#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
-#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
-
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
-
-#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
-
-#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h
deleted file mode 100644
index 29c26a81..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-serial.h
- *
- *  From linux/include/asm-arm/hardware/serial_s3c2410.h
- *
- *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
- *
- *  Adapted from:
- *
- *  Internal header file for MX1ADS serial ports (UART1 & 2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-#define S3C2410_URXH	  (0x24)
-#define S3C2410_UTXH	  (0x20)
-#define S3C2410_ULCON	  (0x00)
-#define S3C2410_UCON	  (0x04)
-#define S3C2410_UFCON	  (0x08)
-#define S3C2410_UMCON	  (0x0C)
-#define S3C2410_UBRDIV	  (0x28)
-#define S3C2410_UTRSTAT	  (0x10)
-#define S3C2410_UERSTAT	  (0x14)
-#define S3C2410_UFSTAT	  (0x18)
-#define S3C2410_UMSTAT	  (0x1C)
-
-#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
-
-#define S3C2410_LCON_CS5	  (0x0)
-#define S3C2410_LCON_CS6	  (0x1)
-#define S3C2410_LCON_CS7	  (0x2)
-#define S3C2410_LCON_CS8	  (0x3)
-#define S3C2410_LCON_CSMASK	  (0x3)
-
-#define S3C2410_LCON_PNONE	  (0x0)
-#define S3C2410_LCON_PEVEN	  (0x5 << 3)
-#define S3C2410_LCON_PODD	  (0x4 << 3)
-#define S3C2410_LCON_PMASK	  (0x7 << 3)
-
-#define S3C2410_LCON_STOPB	  (1<<2)
-#define S3C2410_LCON_IRM          (1<<6)
-
-#define S3C2440_UCON_CLKMASK	  (3<<10)
-#define S3C2440_UCON_CLKSHIFT	  (10)
-#define S3C2440_UCON_PCLK	  (0<<10)
-#define S3C2440_UCON_UCLK	  (1<<10)
-#define S3C2440_UCON_PCLK2	  (2<<10)
-#define S3C2440_UCON_FCLK	  (3<<10)
-#define S3C2443_UCON_EPLL	  (3<<10)
-
-#define S3C6400_UCON_CLKMASK	(3<<10)
-#define S3C6400_UCON_CLKSHIFT	(10)
-#define S3C6400_UCON_PCLK	(0<<10)
-#define S3C6400_UCON_PCLK2	(2<<10)
-#define S3C6400_UCON_UCLK0	(1<<10)
-#define S3C6400_UCON_UCLK1	(3<<10)
-
-#define S3C2440_UCON2_FCLK_EN	  (1<<15)
-#define S3C2440_UCON0_DIVMASK	  (15 << 12)
-#define S3C2440_UCON1_DIVMASK	  (15 << 12)
-#define S3C2440_UCON2_DIVMASK	  (7 << 12)
-#define S3C2440_UCON_DIVSHIFT	  (12)
-
-#define S3C2412_UCON_CLKMASK	(3<<10)
-#define S3C2412_UCON_CLKSHIFT	(10)
-#define S3C2412_UCON_UCLK	(1<<10)
-#define S3C2412_UCON_USYSCLK	(3<<10)
-#define S3C2412_UCON_PCLK	(0<<10)
-#define S3C2412_UCON_PCLK2	(2<<10)
-
-#define S3C2410_UCON_CLKMASK	(1 << 10)
-#define S3C2410_UCON_CLKSHIFT	(10)
-#define S3C2410_UCON_UCLK	  (1<<10)
-#define S3C2410_UCON_SBREAK	  (1<<4)
-
-#define S3C2410_UCON_TXILEVEL	  (1<<9)
-#define S3C2410_UCON_RXILEVEL	  (1<<8)
-#define S3C2410_UCON_TXIRQMODE	  (1<<2)
-#define S3C2410_UCON_RXIRQMODE	  (1<<0)
-#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
-#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
-
-#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
-				   S3C2410_UCON_RXILEVEL  | \
-				   S3C2410_UCON_TXIRQMODE | \
-				   S3C2410_UCON_RXIRQMODE | \
-				   S3C2410_UCON_RXFIFO_TOI)
-
-#define S3C2410_UFCON_FIFOMODE	  (1<<0)
-#define S3C2410_UFCON_TXTRIG0	  (0<<6)
-#define S3C2410_UFCON_RXTRIG8	  (1<<4)
-#define S3C2410_UFCON_RXTRIG12	  (2<<4)
-
-/* S3C2440 FIFO trigger levels */
-#define S3C2440_UFCON_RXTRIG1	  (0<<4)
-#define S3C2440_UFCON_RXTRIG8	  (1<<4)
-#define S3C2440_UFCON_RXTRIG16	  (2<<4)
-#define S3C2440_UFCON_RXTRIG32	  (3<<4)
-
-#define S3C2440_UFCON_TXTRIG0	  (0<<6)
-#define S3C2440_UFCON_TXTRIG16	  (1<<6)
-#define S3C2440_UFCON_TXTRIG32	  (2<<6)
-#define S3C2440_UFCON_TXTRIG48	  (3<<6)
-
-#define S3C2410_UFCON_RESETBOTH	  (3<<1)
-#define S3C2410_UFCON_RESETTX	  (1<<2)
-#define S3C2410_UFCON_RESETRX	  (1<<1)
-
-#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
-				   S3C2410_UFCON_TXTRIG0  | \
-				   S3C2410_UFCON_RXTRIG8 )
-
-#define	S3C2410_UMCOM_AFC	  (1<<4)
-#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
-
-#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
-#define S3C2412_UMCON_AFC_56	(1<<5)
-#define S3C2412_UMCON_AFC_48	(2<<5)
-#define S3C2412_UMCON_AFC_40	(3<<5)
-#define S3C2412_UMCON_AFC_32	(4<<5)
-#define S3C2412_UMCON_AFC_24	(5<<5)
-#define S3C2412_UMCON_AFC_16	(6<<5)
-#define S3C2412_UMCON_AFC_8	(7<<5)
-
-#define S3C2410_UFSTAT_TXFULL	  (1<<9)
-#define S3C2410_UFSTAT_RXFULL	  (1<<8)
-#define S3C2410_UFSTAT_TXMASK	  (15<<4)
-#define S3C2410_UFSTAT_TXSHIFT	  (4)
-#define S3C2410_UFSTAT_RXMASK	  (15<<0)
-#define S3C2410_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C2443 same as S3C2440 */
-#define S3C2440_UFSTAT_TXFULL	  (1<<14)
-#define S3C2440_UFSTAT_RXFULL	  (1<<6)
-#define S3C2440_UFSTAT_TXSHIFT	  (8)
-#define S3C2440_UFSTAT_RXSHIFT	  (0)
-#define S3C2440_UFSTAT_TXMASK	  (63<<8)
-#define S3C2440_UFSTAT_RXMASK	  (63)
-
-#define S3C2410_UTRSTAT_TXE	  (1<<2)
-#define S3C2410_UTRSTAT_TXFE	  (1<<1)
-#define S3C2410_UTRSTAT_RXDR	  (1<<0)
-
-#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
-#define S3C2410_UERSTAT_FRAME	  (1<<2)
-#define S3C2410_UERSTAT_BREAK	  (1<<3)
-#define S3C2443_UERSTAT_PARITY	  (1<<1)
-
-#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
-				   S3C2410_UERSTAT_FRAME | \
-				   S3C2410_UERSTAT_BREAK)
-
-#define S3C2410_UMSTAT_CTS	  (1<<0)
-#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
-
-#define S3C2443_DIVSLOT		  (0x2C)
-
-/* S3C64XX interrupt registers. */
-#define S3C64XX_UINTP		0x30
-#define S3C64XX_UINTSP		0x34
-#define S3C64XX_UINTM		0x38
-
-#define S3C64XX_UINTM_RXD	(0)
-#define S3C64XX_UINTM_TXD	(2)
-#define S3C64XX_UINTM_RXD_MSK	(1 << S3C64XX_UINTM_RXD)
-#define S3C64XX_UINTM_TXD_MSK	(1 << S3C64XX_UINTM_TXD)
-
-/* Following are specific to S5PV210 */
-#define S5PV210_UCON_CLKMASK	(1<<10)
-#define S5PV210_UCON_CLKSHIFT	(10)
-#define S5PV210_UCON_PCLK	(0<<10)
-#define S5PV210_UCON_UCLK	(1<<10)
-
-#define S5PV210_UFCON_TXTRIG0	(0<<8)
-#define S5PV210_UFCON_TXTRIG4	(1<<8)
-#define S5PV210_UFCON_TXTRIG8	(2<<8)
-#define S5PV210_UFCON_TXTRIG16	(3<<8)
-#define S5PV210_UFCON_TXTRIG32	(4<<8)
-#define S5PV210_UFCON_TXTRIG64	(5<<8)
-#define S5PV210_UFCON_TXTRIG128 (6<<8)
-#define S5PV210_UFCON_TXTRIG256 (7<<8)
-
-#define S5PV210_UFCON_RXTRIG1	(0<<4)
-#define S5PV210_UFCON_RXTRIG4	(1<<4)
-#define S5PV210_UFCON_RXTRIG8	(2<<4)
-#define S5PV210_UFCON_RXTRIG16	(3<<4)
-#define S5PV210_UFCON_RXTRIG32	(4<<4)
-#define S5PV210_UFCON_RXTRIG64	(5<<4)
-#define S5PV210_UFCON_RXTRIG128	(6<<4)
-#define S5PV210_UFCON_RXTRIG256	(7<<4)
-
-#define S5PV210_UFSTAT_TXFULL	(1<<24)
-#define S5PV210_UFSTAT_RXFULL	(1<<8)
-#define S5PV210_UFSTAT_TXMASK	(255<<16)
-#define S5PV210_UFSTAT_TXSHIFT	(16)
-#define S5PV210_UFSTAT_RXMASK	(255<<0)
-#define S5PV210_UFSTAT_RXSHIFT	(0)
-
-#define S3C2410_UCON_CLKSEL0	(1 << 0)
-#define S3C2410_UCON_CLKSEL1	(1 << 1)
-#define S3C2410_UCON_CLKSEL2	(1 << 2)
-#define S3C2410_UCON_CLKSEL3	(1 << 3)
-
-/* Default values for s5pv210 UCON and UFCON uart registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-#ifndef __ASSEMBLY__
-
-/* configuration structure for per-machine configurations for the
- * serial port
- *
- * the pointer is setup by the machine specific initialisation from the
- * arch/arm/mach-s3c2410/ directory.
-*/
-
-struct s3c2410_uartcfg {
-	unsigned char	   hwport;	 /* hardware port number */
-	unsigned char	   unused;
-	unsigned short	   flags;
-	upf_t		   uart_flags;	 /* default uart flags */
-	unsigned int	   clk_sel;
-
-	unsigned int	   has_fracval;
-
-	unsigned long	   ucon;	 /* value of ucon for port */
-	unsigned long	   ulcon;	 /* value of ulcon for port */
-	unsigned long	   ufcon;	 /* value of ufcon for port */
-};
-
-/* s3c24xx_uart_devs
- *
- * this is exported from the core as we cannot use driver_register(),
- * or platform_add_device() before the console_initcall()
-*/
-
-extern struct platform_device *s3c24xx_uart_devs[4];
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h
deleted file mode 100644
index 552fe7cf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1		(0x20)
-#define S3C2412_SPI1		(0x100)
-
-#define S3C2410_SPCON		(0x00)
-
-#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
-#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
-
-#define S3C2410_SPSTA		(0x04)
-
-#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	(1 << 3)
-
-#define S3C2410_SPPIN		(0x08)
-
-#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	(1 << 1)
-#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
-
-#define S3C2410_SPPRE		(0x0C)
-#define S3C2410_SPTDAT		(0x10)
-#define S3C2410_SPRDAT		(0x14)
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h
deleted file mode 100644
index 9b6729c8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_REGS_SROM_H
-#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW		S5P_SROMREG(0x0)
-#define S5P_SROM_BC0		S5P_SROMREG(0x4)
-#define S5P_SROM_BC1		S5P_SROMREG(0x8)
-#define S5P_SROM_BC2		S5P_SROMREG(0xc)
-#define S5P_SROM_BC3		S5P_SROMREG(0x10)
-#define S5P_SROM_BC4		S5P_SROMREG(0x14)
-#define S5P_SROM_BC5		S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
-#define S5P_SROM_BW__ADDRMODE__SHIFT		1
-#define S5P_SROM_BW__WAITENABLE__SHIFT		2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
-
-#define S5P_SROM_BW__CS_MASK			0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT		0
-#define S5P_SROM_BW__NCS1__SHIFT		4
-#define S5P_SROM_BW__NCS2__SHIFT		8
-#define S5P_SROM_BW__NCS3__SHIFT		12
-#define S5P_SROM_BW__NCS4__SHIFT		16
-#define S5P_SROM_BW__NCS5__SHIFT		20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT		0
-#define S5P_SROM_BCX__TACP__SHIFT		4
-#define S5P_SROM_BCX__TCAH__SHIFT		8
-#define S5P_SROM_BCX__TCOH__SHIFT		12
-#define S5P_SROM_BCX__TACC__SHIFT		16
-#define S5P_SROM_BCX__TCOS__SHIFT		24
-#define S5P_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h
deleted file mode 100644
index d097d92f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h
deleted file mode 100644
index 4003d3da..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
-
-#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
-#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
-#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
-#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
-#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
-
-#define S3C2410_UDC_PWR_DEFAULT		(0x00)
-
-#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
-#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
-#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
-#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
-#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
-#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
-
-#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
-#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
-
-#define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01)
-#define S3C2410_UDC_INDEX_EP2		(0x02)
-#define S3C2410_UDC_INDEX_EP3		(0x03)
-#define S3C2410_UDC_INDEX_EP4		(0x04)
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
-#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
-#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
-#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
-#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
-#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
-#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
-#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
-#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
-#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
-#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
-#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
-#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
-#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
-#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
-#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
-#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
-#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
-
-#define S3C2410_UDC_MAXP_8		(1 << 0)
-#define S3C2410_UDC_MAXP_16		(1 << 1)
-#define S3C2410_UDC_MAXP_32		(1 << 2)
-#define S3C2410_UDC_MAXP_64		(1 << 3)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
deleted file mode 100644
index fcf27966..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device PHY registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, this is a separate header file as some of the clock framework
- * needs to touch this if the clk_48m is used as the USB OHCI or other
- * peripheral source.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
-
-/* S3C64XX_PA_USB_HSPHY */
-
-#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
-
-#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
-#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
-#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
-#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
-
-#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
-#define S3C_PHYCLK_MODE_USB11			(1 << 6)
-#define S3C_PHYCLK_EXT_OSC			(1 << 5)
-#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
-#define S3C_PHYCLK_ID_PULL			(1 << 2)
-#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
-#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
-#define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 1)
-#define S3C_RSTCON_PHY				(1 << 0)
-
-#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
deleted file mode 100644
index dc90f5ed..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ /dev/null
@@ -1,379 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
-
-#define S3C_HSOTG_REG(x) (x)
-
-#define S3C_GOTGCTL				S3C_HSOTG_REG(0x000)
-#define S3C_GOTGCTL_BSESVLD			(1 << 19)
-#define S3C_GOTGCTL_ASESVLD			(1 << 18)
-#define S3C_GOTGCTL_DBNC_SHORT			(1 << 17)
-#define S3C_GOTGCTL_CONID_B			(1 << 16)
-#define S3C_GOTGCTL_DEVHNPEN			(1 << 11)
-#define S3C_GOTGCTL_HSSETHNPEN			(1 << 10)
-#define S3C_GOTGCTL_HNPREQ			(1 << 9)
-#define S3C_GOTGCTL_HSTNEGSCS			(1 << 8)
-#define S3C_GOTGCTL_SESREQ			(1 << 1)
-#define S3C_GOTGCTL_SESREQSCS			(1 << 0)
-
-#define S3C_GOTGINT				S3C_HSOTG_REG(0x004)
-#define S3C_GOTGINT_DbnceDone			(1 << 19)
-#define S3C_GOTGINT_ADevTOUTChg			(1 << 18)
-#define S3C_GOTGINT_HstNegDet			(1 << 17)
-#define S3C_GOTGINT_HstnegSucStsChng		(1 << 9)
-#define S3C_GOTGINT_SesReqSucStsChng		(1 << 8)
-#define S3C_GOTGINT_SesEndDet			(1 << 2)
-
-#define S3C_GAHBCFG				S3C_HSOTG_REG(0x008)
-#define S3C_GAHBCFG_PTxFEmpLvl			(1 << 8)
-#define S3C_GAHBCFG_NPTxFEmpLvl			(1 << 7)
-#define S3C_GAHBCFG_DMAEn			(1 << 5)
-#define S3C_GAHBCFG_HBstLen_MASK		(0xf << 1)
-#define S3C_GAHBCFG_HBstLen_SHIFT		(1)
-#define S3C_GAHBCFG_HBstLen_Single		(0x0 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr		(0x1 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr4		(0x3 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr8		(0x5 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr16		(0x7 << 1)
-#define S3C_GAHBCFG_GlblIntrEn			(1 << 0)
-
-#define S3C_GUSBCFG				S3C_HSOTG_REG(0x00C)
-#define S3C_GUSBCFG_PHYLPClkSel			(1 << 15)
-#define S3C_GUSBCFG_HNPCap			(1 << 9)
-#define S3C_GUSBCFG_SRPCap			(1 << 8)
-#define S3C_GUSBCFG_PHYIf16			(1 << 3)
-#define S3C_GUSBCFG_TOutCal_MASK		(0x7 << 0)
-#define S3C_GUSBCFG_TOutCal_SHIFT		(0)
-#define S3C_GUSBCFG_TOutCal_LIMIT		(0x7)
-#define S3C_GUSBCFG_TOutCal(_x)			((_x) << 0)
-
-#define S3C_GRSTCTL				S3C_HSOTG_REG(0x010)
-
-#define S3C_GRSTCTL_AHBIdle			(1 << 31)
-#define S3C_GRSTCTL_DMAReq			(1 << 30)
-#define S3C_GRSTCTL_TxFNum_MASK			(0x1f << 6)
-#define S3C_GRSTCTL_TxFNum_SHIFT		(6)
-#define S3C_GRSTCTL_TxFNum_LIMIT		(0x1f)
-#define S3C_GRSTCTL_TxFNum(_x)			((_x) << 6)
-#define S3C_GRSTCTL_TxFFlsh			(1 << 5)
-#define S3C_GRSTCTL_RxFFlsh			(1 << 4)
-#define S3C_GRSTCTL_INTknQFlsh			(1 << 3)
-#define S3C_GRSTCTL_FrmCntrRst			(1 << 2)
-#define S3C_GRSTCTL_HSftRst			(1 << 1)
-#define S3C_GRSTCTL_CSftRst			(1 << 0)
-
-#define S3C_GINTSTS				S3C_HSOTG_REG(0x014)
-#define S3C_GINTMSK				S3C_HSOTG_REG(0x018)
-
-#define S3C_GINTSTS_WkUpInt			(1 << 31)
-#define S3C_GINTSTS_SessReqInt			(1 << 30)
-#define S3C_GINTSTS_DisconnInt			(1 << 29)
-#define S3C_GINTSTS_ConIDStsChng		(1 << 28)
-#define S3C_GINTSTS_PTxFEmp			(1 << 26)
-#define S3C_GINTSTS_HChInt			(1 << 25)
-#define S3C_GINTSTS_PrtInt			(1 << 24)
-#define S3C_GINTSTS_FetSusp			(1 << 22)
-#define S3C_GINTSTS_incompIP			(1 << 21)
-#define S3C_GINTSTS_IncomplSOIN			(1 << 20)
-#define S3C_GINTSTS_OEPInt			(1 << 19)
-#define S3C_GINTSTS_IEPInt			(1 << 18)
-#define S3C_GINTSTS_EPMis			(1 << 17)
-#define S3C_GINTSTS_EOPF			(1 << 15)
-#define S3C_GINTSTS_ISOutDrop			(1 << 14)
-#define S3C_GINTSTS_EnumDone			(1 << 13)
-#define S3C_GINTSTS_USBRst			(1 << 12)
-#define S3C_GINTSTS_USBSusp			(1 << 11)
-#define S3C_GINTSTS_ErlySusp			(1 << 10)
-#define S3C_GINTSTS_GOUTNakEff			(1 << 7)
-#define S3C_GINTSTS_GINNakEff			(1 << 6)
-#define S3C_GINTSTS_NPTxFEmp			(1 << 5)
-#define S3C_GINTSTS_RxFLvl			(1 << 4)
-#define S3C_GINTSTS_SOF				(1 << 3)
-#define S3C_GINTSTS_OTGInt			(1 << 2)
-#define S3C_GINTSTS_ModeMis			(1 << 1)
-#define S3C_GINTSTS_CurMod_Host			(1 << 0)
-
-#define S3C_GRXSTSR				S3C_HSOTG_REG(0x01C)
-#define S3C_GRXSTSP				S3C_HSOTG_REG(0x020)
-
-#define S3C_GRXSTS_FN_MASK			(0x7f << 25)
-#define S3C_GRXSTS_FN_SHIFT			(25)
-
-#define S3C_GRXSTS_PktSts_MASK			(0xf << 17)
-#define S3C_GRXSTS_PktSts_SHIFT			(17)
-#define S3C_GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
-#define S3C_GRXSTS_PktSts_OutRX			(0x2 << 17)
-#define S3C_GRXSTS_PktSts_OutDone		(0x3 << 17)
-#define S3C_GRXSTS_PktSts_SetupDone		(0x4 << 17)
-#define S3C_GRXSTS_PktSts_SetupRX		(0x6 << 17)
-
-#define S3C_GRXSTS_DPID_MASK			(0x3 << 15)
-#define S3C_GRXSTS_DPID_SHIFT			(15)
-#define S3C_GRXSTS_ByteCnt_MASK			(0x7ff << 4)
-#define S3C_GRXSTS_ByteCnt_SHIFT		(4)
-#define S3C_GRXSTS_EPNum_MASK			(0xf << 0)
-#define S3C_GRXSTS_EPNum_SHIFT			(0)
-
-#define S3C_GRXFSIZ				S3C_HSOTG_REG(0x024)
-
-#define S3C_GNPTXFSIZ				S3C_HSOTG_REG(0x028)
-
-#define S3C_GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
-#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT		(16)
-#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFDep(_x)		((_x) << 16)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
-
-#define S3C_GNPTXSTS				S3C_HSOTG_REG(0x02C)
-
-#define S3C_GNPTXSTS_NPtxQTop_MASK		(0x7f << 24)
-#define S3C_GNPTXSTS_NPtxQTop_SHIFT		(24)
-
-#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT	(16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v)	(((_v) >> 16) & 0xff)
-
-#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT	(0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v)	(((_v) >> 0) & 0xffff)
-
-
-#define S3C_HPTXFSIZ				S3C_HSOTG_REG(0x100)
-
-#define S3C_DPTXFSIZn(_a)			S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
-
-#define S3C_DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
-#define S3C_DPTXFSIZn_DPTxFSize_SHIFT		(16)
-#define S3C_DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
-
-#define S3C_DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
-
-/* Device mode registers */
-#define S3C_DCFG				S3C_HSOTG_REG(0x800)
-
-#define S3C_DCFG_EPMisCnt_MASK			(0x1f << 18)
-#define S3C_DCFG_EPMisCnt_SHIFT			(18)
-#define S3C_DCFG_EPMisCnt_LIMIT			(0x1f)
-#define S3C_DCFG_EPMisCnt(_x)			((_x) << 18)
-
-#define S3C_DCFG_PerFrInt_MASK			(0x3 << 11)
-#define S3C_DCFG_PerFrInt_SHIFT			(11)
-#define S3C_DCFG_PerFrInt_LIMIT			(0x3)
-#define S3C_DCFG_PerFrInt(_x)			((_x) << 11)
-
-#define S3C_DCFG_DevAddr_MASK			(0x7f << 4)
-#define S3C_DCFG_DevAddr_SHIFT			(4)
-#define S3C_DCFG_DevAddr_LIMIT			(0x7f)
-#define S3C_DCFG_DevAddr(_x)			((_x) << 4)
-
-#define S3C_DCFG_NZStsOUTHShk			(1 << 2)
-
-#define S3C_DCFG_DevSpd_MASK			(0x3 << 0)
-#define S3C_DCFG_DevSpd_SHIFT			(0)
-#define S3C_DCFG_DevSpd_HS			(0x0 << 0)
-#define S3C_DCFG_DevSpd_FS			(0x1 << 0)
-#define S3C_DCFG_DevSpd_LS			(0x2 << 0)
-#define S3C_DCFG_DevSpd_FS48			(0x3 << 0)
-
-#define S3C_DCTL				S3C_HSOTG_REG(0x804)
-
-#define S3C_DCTL_PWROnPrgDone			(1 << 11)
-#define S3C_DCTL_CGOUTNak			(1 << 10)
-#define S3C_DCTL_SGOUTNak			(1 << 9)
-#define S3C_DCTL_CGNPInNAK			(1 << 8)
-#define S3C_DCTL_SGNPInNAK			(1 << 7)
-#define S3C_DCTL_TstCtl_MASK			(0x7 << 4)
-#define S3C_DCTL_TstCtl_SHIFT			(4)
-#define S3C_DCTL_GOUTNakSts			(1 << 3)
-#define S3C_DCTL_GNPINNakSts			(1 << 2)
-#define S3C_DCTL_SftDiscon			(1 << 1)
-#define S3C_DCTL_RmtWkUpSig			(1 << 0)
-
-#define S3C_DSTS				S3C_HSOTG_REG(0x808)
-
-#define S3C_DSTS_SOFFN_MASK			(0x3fff << 8)
-#define S3C_DSTS_SOFFN_SHIFT			(8)
-#define S3C_DSTS_SOFFN_LIMIT			(0x3fff)
-#define S3C_DSTS_SOFFN(_x)			((_x) << 8)
-#define S3C_DSTS_ErraticErr			(1 << 3)
-#define S3C_DSTS_EnumSpd_MASK			(0x3 << 1)
-#define S3C_DSTS_EnumSpd_SHIFT			(1)
-#define S3C_DSTS_EnumSpd_HS			(0x0 << 1)
-#define S3C_DSTS_EnumSpd_FS			(0x1 << 1)
-#define S3C_DSTS_EnumSpd_LS			(0x2 << 1)
-#define S3C_DSTS_EnumSpd_FS48			(0x3 << 1)
-
-#define S3C_DSTS_SuspSts			(1 << 0)
-
-#define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
-
-#define S3C_DIEPMSK_TxFIFOEmpty			(1 << 7)
-#define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
-#define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
-#define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
-#define S3C_DIEPMSK_TimeOUTMsk			(1 << 3)
-#define S3C_DIEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DIEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DIEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DOEPMSK				S3C_HSOTG_REG(0x814)
-
-#define S3C_DOEPMSK_Back2BackSetup		(1 << 6)
-#define S3C_DOEPMSK_OUTTknEPdisMsk		(1 << 4)
-#define S3C_DOEPMSK_SetupMsk			(1 << 3)
-#define S3C_DOEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DOEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DOEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DAINT				S3C_HSOTG_REG(0x818)
-#define S3C_DAINTMSK				S3C_HSOTG_REG(0x81C)
-
-#define S3C_DAINT_OutEP_SHIFT			(16)
-#define S3C_DAINT_OutEP(x)			(1 << ((x) + 16))
-#define S3C_DAINT_InEP(x)			(1 << (x))
-
-#define S3C_DTKNQR1				S3C_HSOTG_REG(0x820)
-#define S3C_DTKNQR2				S3C_HSOTG_REG(0x824)
-#define S3C_DTKNQR3				S3C_HSOTG_REG(0x830)
-#define S3C_DTKNQR4				S3C_HSOTG_REG(0x834)
-
-#define S3C_DVBUSDIS				S3C_HSOTG_REG(0x828)
-#define S3C_DVBUSPULSE				S3C_HSOTG_REG(0x82C)
-
-#define S3C_DIEPCTL0				S3C_HSOTG_REG(0x900)
-#define S3C_DOEPCTL0				S3C_HSOTG_REG(0xB00)
-#define S3C_DIEPCTL(_a)				S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
-#define S3C_DOEPCTL(_a)				S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
-
-/* EP0 specialness:
- * bits[29..28] - reserved (no SetD0PID, SetD1PID)
- * bits[25..22] - should always be zero, this isn't a periodic endpoint
- * bits[10..0] - MPS setting differenct for EP0
-*/
-#define S3C_D0EPCTL_MPS_MASK			(0x3 << 0)
-#define S3C_D0EPCTL_MPS_SHIFT			(0)
-#define S3C_D0EPCTL_MPS_64			(0x0 << 0)
-#define S3C_D0EPCTL_MPS_32			(0x1 << 0)
-#define S3C_D0EPCTL_MPS_16			(0x2 << 0)
-#define S3C_D0EPCTL_MPS_8			(0x3 << 0)
-
-#define S3C_DxEPCTL_EPEna			(1 << 31)
-#define S3C_DxEPCTL_EPDis			(1 << 30)
-#define S3C_DxEPCTL_SetD1PID			(1 << 29)
-#define S3C_DxEPCTL_SetOddFr			(1 << 29)
-#define S3C_DxEPCTL_SetD0PID			(1 << 28)
-#define S3C_DxEPCTL_SetEvenFr			(1 << 28)
-#define S3C_DxEPCTL_SNAK			(1 << 27)
-#define S3C_DxEPCTL_CNAK			(1 << 26)
-#define S3C_DxEPCTL_TxFNum_MASK			(0xf << 22)
-#define S3C_DxEPCTL_TxFNum_SHIFT		(22)
-#define S3C_DxEPCTL_TxFNum_LIMIT		(0xf)
-#define S3C_DxEPCTL_TxFNum(_x)			((_x) << 22)
-
-#define S3C_DxEPCTL_Stall			(1 << 21)
-#define S3C_DxEPCTL_Snp				(1 << 20)
-#define S3C_DxEPCTL_EPType_MASK			(0x3 << 18)
-#define S3C_DxEPCTL_EPType_SHIFT		(18)
-#define S3C_DxEPCTL_EPType_Control		(0x0 << 18)
-#define S3C_DxEPCTL_EPType_Iso			(0x1 << 18)
-#define S3C_DxEPCTL_EPType_Bulk			(0x2 << 18)
-#define S3C_DxEPCTL_EPType_Intterupt		(0x3 << 18)
-
-#define S3C_DxEPCTL_NAKsts			(1 << 17)
-#define S3C_DxEPCTL_DPID			(1 << 16)
-#define S3C_DxEPCTL_EOFrNum			(1 << 16)
-#define S3C_DxEPCTL_USBActEp			(1 << 15)
-#define S3C_DxEPCTL_NextEp_MASK			(0xf << 11)
-#define S3C_DxEPCTL_NextEp_SHIFT		(11)
-#define S3C_DxEPCTL_NextEp_LIMIT		(0xf)
-#define S3C_DxEPCTL_NextEp(_x)			((_x) << 11)
-
-#define S3C_DxEPCTL_MPS_MASK			(0x7ff << 0)
-#define S3C_DxEPCTL_MPS_SHIFT			(0)
-#define S3C_DxEPCTL_MPS_LIMIT			(0x7ff)
-#define S3C_DxEPCTL_MPS(_x)			((_x) << 0)
-
-#define S3C_DIEPINT(_a)				S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
-#define S3C_DOEPINT(_a)				S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
-
-#define S3C_DxEPINT_INEPNakEff			(1 << 6)
-#define S3C_DxEPINT_Back2BackSetup		(1 << 6)
-#define S3C_DxEPINT_INTknEPMis			(1 << 5)
-#define S3C_DxEPINT_INTknTXFEmp			(1 << 4)
-#define S3C_DxEPINT_OUTTknEPdis			(1 << 4)
-#define S3C_DxEPINT_Timeout			(1 << 3)
-#define S3C_DxEPINT_Setup			(1 << 3)
-#define S3C_DxEPINT_AHBErr			(1 << 2)
-#define S3C_DxEPINT_EPDisbld			(1 << 1)
-#define S3C_DxEPINT_XferCompl			(1 << 0)
-
-#define S3C_DIEPTSIZ0				S3C_HSOTG_REG(0x910)
-
-#define S3C_DIEPTSIZ0_PktCnt_MASK		(0x3 << 19)
-#define S3C_DIEPTSIZ0_PktCnt_SHIFT		(19)
-#define S3C_DIEPTSIZ0_PktCnt_LIMIT		(0x3)
-#define S3C_DIEPTSIZ0_PktCnt(_x)		((_x) << 19)
-
-#define S3C_DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DIEPTSIZ0_XferSize_SHIFT		(0)
-#define S3C_DIEPTSIZ0_XferSize_LIMIT		(0x7f)
-#define S3C_DIEPTSIZ0_XferSize(_x)		((_x) << 0)
-
-
-#define DOEPTSIZ0				S3C_HSOTG_REG(0xB10)
-#define S3C_DOEPTSIZ0_SUPCnt_MASK		(0x3 << 29)
-#define S3C_DOEPTSIZ0_SUPCnt_SHIFT		(29)
-#define S3C_DOEPTSIZ0_SUPCnt_LIMIT		(0x3)
-#define S3C_DOEPTSIZ0_SUPCnt(_x)		((_x) << 29)
-
-#define S3C_DOEPTSIZ0_PktCnt			(1 << 19)
-#define S3C_DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DOEPTSIZ0_XferSize_SHIFT		(0)
-
-#define S3C_DIEPTSIZ(_a)			S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
-#define S3C_DOEPTSIZ(_a)			S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
-
-#define S3C_DxEPTSIZ_MC_MASK			(0x3 << 29)
-#define S3C_DxEPTSIZ_MC_SHIFT			(29)
-#define S3C_DxEPTSIZ_MC_LIMIT			(0x3)
-#define S3C_DxEPTSIZ_MC(_x)			((_x) << 29)
-
-#define S3C_DxEPTSIZ_PktCnt_MASK		(0x3ff << 19)
-#define S3C_DxEPTSIZ_PktCnt_SHIFT		(19)
-#define S3C_DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
-#define S3C_DxEPTSIZ_PktCnt_LIMIT		(0x3ff)
-#define S3C_DxEPTSIZ_PktCnt(_x)			((_x) << 19)
-
-#define S3C_DxEPTSIZ_XferSize_MASK		(0x7ffff << 0)
-#define S3C_DxEPTSIZ_XferSize_SHIFT		(0)
-#define S3C_DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
-#define S3C_DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
-#define S3C_DxEPTSIZ_XferSize(_x)		((_x) << 0)
-
-
-#define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
-#define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
-#define S3C_DTXFSTS(_a)				S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
-
-#define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h
deleted file mode 100644
index 49384924..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h
deleted file mode 100644
index 21d8594d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_rtc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_RTC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h
deleted file mode 100644
index 55b0e5f5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-extern  int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h
deleted file mode 100644
index cbae50dd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h
deleted file mode 100644
index de2b5bdc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern  int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h
deleted file mode 100644
index a5b794ff..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern  int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h
deleted file mode 100644
index ea0c961b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index fa95e9a0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- * @set_level: CS line control.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-	void (*set_level)(unsigned line_id, int lvl);
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @clk_from_cmu: If the SPI clock/prescalar control block is present
- *     by the platform's clock-management-unit and not in SPI controller.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
- * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
- * @high_speed: If the controller supports HIGH_SPEED_EN bit
- * @tx_st_done: Depends on tx fifo_lvl field
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	bool clk_from_cmu;
-
-	int num_cs;
-
-	int (*cfg_gpio)(struct platform_device *pdev);
-
-	/* Following two fields are for future compatibility */
-	int fifo_lvl_mask;
-	int rx_lvl_offset;
-	int high_speed;
-	int tx_st_done;
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @pd: SPI platform data to set.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h
deleted file mode 100644
index 1de4b32f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_bpll clk_ext_xtal_mux
-#define clk_fin_cpll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_bpll;
-extern struct clk clk_fout_cpll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_bpll;
-extern struct clksrc_sources clk_src_cpll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h
deleted file mode 100644
index 3a70aebc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
-	S5P_PWM0,
-	S5P_PWM1,
-	S5P_PWM2,
-	S5P_PWM3,
-	S5P_PWM4,
-};
-
-struct s5p_timer_source {
-	unsigned int event_id;
-	unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE	4
-
-#define TCNT_MAX		0xffffffff
-#define NON_PERIODIC		0
-#define PERIODIC		1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
-					enum s5p_timer_mode source);
-extern	struct sys_timer s5p_timer;
-#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h
deleted file mode 100644
index e834c5ef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h
+++ /dev/null
@@ -1,387 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sdhci.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_H
-#define __PLAT_S3C_SDHCI_H __FILE__
-
-#include <plat/devs.h>
-
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
-	S3C_SDHCI_CD_INTERNAL,	/* use mmc internal CD line */
-	S3C_SDHCI_CD_EXTERNAL,	/* use external callback */
-	S3C_SDHCI_CD_GPIO,	/* use external gpio pin for CD line */
-	S3C_SDHCI_CD_NONE,	/* no CD line, use polling to detect card */
-	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
-};
-
-enum clk_types {
-	S3C_SDHCI_CLK_DIV_INTERNAL,	/* use mmc internal clock divider */
-	S3C_SDHCI_CLK_DIV_EXTERNAL,	/* use external clock divider */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @host_caps2: The second standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @clk_type: Type of clock divider method (see clk_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- *		 notify_func argument is a callback to the sdhci-s3c driver
- *		 that triggers the card detection event. Callback arguments:
- *		 dev is pointer to platform device of the host controller,
- *		 state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- *		 sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- *		 notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- *		 cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
-	unsigned int	max_width;
-	unsigned int	host_caps;
-	unsigned int	host_caps2;
-	unsigned int	pm_caps;
-	enum cd_types	cd_type;
-	enum clk_types	clk_type;
-
-	int		ext_cd_gpio;
-	bool		ext_cd_gpio_invert;
-	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
-						   int state));
-	int	(*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
-						      int state));
-
-	void	(*cfg_gpio)(struct platform_device *dev, int width);
-};
-
-/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
- * @pd: The default platform data for this device.
- * @set: Pointer to the platform data to fill in.
- */
-extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
-				    struct s3c_sdhci_platdata *set);
-
-/**
- * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use withe S3C SDHCI device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
-
-/* Default platform data, exported so that per-cpu initialisation can
- * set the correct one when there are more than one cpu type selected.
-*/
-
-extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
-
-/* Helper function availability */
-
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
-/* S3C64XX SDHCI setup */
-
-#ifdef CONFIG_S3C64XX_SETUP_SDHCI
-static inline void s3c6400_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-static inline void s3c6410_default_sdhci1(void) { }
-static inline void s3c6410_default_sdhci2(void) { }
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-static inline void s3c6400_default_sdhci2(void) { }
-
-#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-
-/* S5P64X0 SDHCI setup */
-
-#ifdef CONFIG_S5P64X0_SETUP_SDHCI
-static inline void s5p64x0_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5p64x0_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5p6440_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5p6450_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5p64x0_default_sdhci0(void) { }
-static inline void s5p64x0_default_sdhci1(void) { }
-static inline void s5p6440_default_sdhci2(void) { }
-static inline void s5p6450_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5P64X0_SETUP_SDHCI */
-
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-static inline void s5pc100_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-/* S5PV210 SDHCI setup */
-
-#ifdef CONFIG_S5PV210_SETUP_SDHCI
-static inline void s5pv210_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-static inline void s5pv210_default_sdhci1(void) { }
-static inline void s5pv210_default_sdhci2(void) { }
-static inline void s5pv210_default_sdhci3(void) { }
-
-#endif /* CONFIG_S5PV210_SETUP_SDHCI */
-
-/* EXYNOS4 SDHCI setup */
-#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-static inline void exynos4_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void exynos4_default_sdhci0(void) { }
-static inline void exynos4_default_sdhci1(void) { }
-static inline void exynos4_default_sdhci2(void) { }
-static inline void exynos4_default_sdhci3(void) { }
-
-#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
-
-static inline void s3c_sdhci_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S3C_DEV_HSMMC
-	case 0:
-		s3c_device_hsmmc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	case 1:
-		s3c_device_hsmmc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	case 2:
-		s3c_device_hsmmc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	case 3:
-		s3c_device_hsmmc3.name = name;
-		break;
-#endif
-	}
-}
-
-#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h
deleted file mode 100644
index 5fe8ee01..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
-	SYSMMU_PAGEFAULT,
-	SYSMMU_AR_MULTIHIT,
-	SYSMMU_AW_MULTIHIT,
-	SYSMMU_BUSERROR,
-	SYSMMU_AR_SECURITY,
-	SYSMMU_AR_ACCESS,
-	SYSMMU_AW_SECURITY,
-	SYSMMU_AW_PROTECTION, /* 7 */
-	SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- *               SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- *         zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h
deleted file mode 100644
index 3bc34f3c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/tv.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *	Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * Samsung TV driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_PLAT_TV_H
-#define __SAMSUNG_PLAT_TV_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s5p_hdmi_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_hdmi.name = name;
-#endif
-}
-
-static inline void s5p_mixer_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_mixer.name = name;
-#endif
-}
-
-static inline void s5p_sdo_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_sdo.name = name;
-#endif
-}
-
-#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h
deleted file mode 100644
index c9e3667c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/udc-hs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C USB2.0 High-speed / OtG platform information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c_hsotg_dmamode {
-	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
-	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
-	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
-};
-
-/**
- * struct s3c_hsotg_plat - platform data for high-speed otg/udc
- * @dma: Whether to use DMA or not.
- * @is_osc: The clock source is an oscillator, not a crystal
- */
-struct s3c_hsotg_plat {
-	enum s3c_hsotg_dmamode	dma;
-	unsigned int		is_osc : 1;
-
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h
deleted file mode 100644
index 7e068d18..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#ifdef S3C_PA_UART
-#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
-#endif
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-
-	/* Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h
deleted file mode 100644
index 959bcdb0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_USB_PHY_H
-#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
-
-enum s5p_usb_phy_type {
-	S5P_USB_PHY_DEVICE,
-	S5P_USB_PHY_HOST,
-};
-
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_SAMSUNG_USB_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h
deleted file mode 100644
index 43e4acd2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/wakeup-mask.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Support for wakeup mask interrupts on newer SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifndef __PLAT_WAKEUP_MASK_H
-#define __PLAT_WAKEUP_MASK_H __file__
-
-/* if no irq yet defined, but still want to mask */
-#define NO_WAKEUP_IRQ (0x90000000)
-
-/**
- * struct samsung_wakeup_mask - wakeup mask information
- * @irq: The interrupt associated with this wakeup.
- * @bit: The bit, as a (1 << bitno) controlling this source.
- */ 
-struct samsung_wakeup_mask {
-	unsigned int	irq;
-	u32		bit;
-};
-
-/**
- * samsung_sync_wakemask - sync wakeup mask information for pm
- * @reg: The register that is used.
- * @masks: The list of masks to use.
- * @nr_masks: The number of entries pointed to buy @masks.
- *
- * Synchronise the wakeup mask information at suspend time from the list
- * of interrupts and control bits in @masks. We do this at suspend time
- * as overriding the relevant irq chips is harder and the register is only
- * required to be correct before we enter sleep.
- */
-extern void samsung_sync_wakemask(void __iomem *reg,
-				  struct samsung_wakeup_mask *masks,
-				  int nr_masks);
-
-#endif /* __PLAT_WAKEUP_MASK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h
deleted file mode 100644
index bc4db9b0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/clock.h>
-#include <plat/regs-watchdog.h>
-#include <mach/map.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-static inline void arch_wdt_reset(void)
-{
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	if (!IS_ERR(s3c2410_wdtclk))
-		clk_enable(s3c2410_wdtclk);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c b/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
deleted file mode 100644
index 79d10fca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* linux/arch/arm/plat-s3c/init.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series CPU initialisation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/regs-serial.h>
-
-static struct cpu_table *cpu;
-
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
-						struct cpu_table *tab,
-						unsigned int count)
-{
-	for (; count != 0; count--, tab++) {
-		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
-			return tab;
-	}
-
-	return NULL;
-}
-
-void __init s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cputab, unsigned int cputab_size)
-{
-	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported Samsung CPU");
-	}
-
-	cpu->map_io();
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c b/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c
deleted file mode 100644
index f980cf3d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/plat-samsung/irq-vic-timer.c
- *	originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-timer.h>
-
-#include <asm/mach/irq.h>
-
-static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	generic_handle_irq((int)desc->irq_data.handler_data);
-	chained_irq_exit(chip, desc);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-static void s3c_irq_timer_ack(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	u32 mask = (1 << 5) << (d->irq - gc->irq_base);
-
-	irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
-}
-
-/**
- * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
- * @num: Number of timers to initialize
- * @timer_irq: Base IRQ number to be used for the timers.
- *
- * Register the necessary IRQ chaining and support for the timer IRQs
- * chained of the VIC.
- */
-void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
-{
-	unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
-				 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
-	struct irq_chip_generic *s3c_tgc;
-	struct irq_chip_type *ct;
-	unsigned int i;
-
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
-	} else {
-		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
-	}
-#endif
-	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
-					 S3C64XX_TINT_CSTAT, handle_level_irq);
-
-	if (!s3c_tgc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
-		       __func__, timer_irq);
-		return;
-	}
-
-	ct = s3c_tgc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_ack = s3c_irq_timer_ack;
-	irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	/* Clear the upper bits of the mask_cache*/
-	s3c_tgc->mask_cache &= 0x1f;
-
-	for (i = 0; i < num; i++, timer_irq++) {
-		irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
-		irq_set_handler_data(pirq[i], (void *)timer_irq);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c
deleted file mode 100644
index 312b510d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/pd.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Power domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-
-#include <plat/pd.h>
-
-static int samsung_pd_probe(struct platform_device *pdev)
-{
-	struct samsung_pd_info *pdata = pdev->dev.platform_data;
-	struct device *dev = &pdev->dev;
-
-	if (!pdata) {
-		dev_err(dev, "no device data specified\n");
-		return -ENOENT;
-	}
-
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	dev_info(dev, "power domain registered\n");
-	return 0;
-}
-
-static int __devexit samsung_pd_remove(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	pm_runtime_disable(dev);
-	return 0;
-}
-
-static int samsung_pd_runtime_suspend(struct device *dev)
-{
-	struct samsung_pd_info *pdata = dev->platform_data;
-	int ret = 0;
-
-	if (pdata->disable)
-		ret = pdata->disable(dev);
-
-	dev_dbg(dev, "suspended\n");
-	return ret;
-}
-
-static int samsung_pd_runtime_resume(struct device *dev)
-{
-	struct samsung_pd_info *pdata = dev->platform_data;
-	int ret = 0;
-
-	if (pdata->enable)
-		ret = pdata->enable(dev);
-
-	dev_dbg(dev, "resumed\n");
-	return ret;
-}
-
-static const struct dev_pm_ops samsung_pd_pm_ops = {
-	.runtime_suspend	= samsung_pd_runtime_suspend,
-	.runtime_resume		= samsung_pd_runtime_resume,
-};
-
-static struct platform_driver samsung_pd_driver = {
-	.driver		= {
-		.name		= "samsung-pd",
-		.owner		= THIS_MODULE,
-		.pm		= &samsung_pd_pm_ops,
-	},
-	.probe		= samsung_pd_probe,
-	.remove		= __devexit_p(samsung_pd_remove),
-};
-
-static int __init samsung_pd_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&samsung_pd_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add PD driver\n", __func__);
-
-	return ret;
-}
-arch_initcall(samsung_pd_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c b/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c
deleted file mode 100644
index fa78aa71..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-samsung/platformdata.c
- *
- * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
- *
- * Helper for platform data setting
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-
-void __init *s3c_set_platdata(void *pd, size_t pdsize,
-			      struct platform_device *pdev)
-{
-	void *npd;
-
-	if (!pd) {
-		/* too early to use dev_name(), may not be registered */
-		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
-		return NULL;
-	}
-
-	npd = kmemdup(pd, pdsize, GFP_KERNEL);
-	if (!npd) {
-		printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
-		return NULL;
-	}
-
-	pdev->dev.platform_data = npd;
-	return npd;
-}
-
-void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
-			     struct s3c_sdhci_platdata *set)
-{
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->host_caps2)
-		set->host_caps2 |= pd->host_caps2;
-	if (pd->pm_caps)
-		set->pm_caps |= pd->pm_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c
deleted file mode 100644
index 3cbd6266..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm-check.c
- *  originally in linux/arch/arm/plat-s3c24xx/pm.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include <plat/pm.h>
-
-#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
-#endif
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c_pm_run_res
- *
- * go through the given resource list, and look for system ram
-*/
-
-static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-				  (unsigned long)ptr->start,
-				  (unsigned long)ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)resource_size(res);
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
-		  (unsigned long)res->start, (unsigned long)res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-void s3c_pm_check_prepare(void)
-{
-	crc_size = 0;
-
-	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
-
-	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
-
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-void s3c_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contains the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-/**
- * s3c_pm_runcheck() - helper to check a resource on restore.
- * @res: The resource to check
- * @vak: Pointer to list of CRC32 values to check.
- *
- * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
- * function runs the given memory resource checking it against the stored
- * CRC to ensure that memory is restored. The function tries to skip as
- * many of the areas used during the suspend process.
- */
-static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
-{
-	unsigned long addr;
-	unsigned long left;
-	void *stkpage;
-	void *ptr;
-	u32 calc;
-
-	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		ptr = phys_to_virt(addr);
-
-		if (in_region(ptr, left, stkpage, 4096)) {
-			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, crcs, crc_size)) {
-			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
-	}
-
-	return val;
-}
-
-/**
- * s3c_pm_check_restore() - memory check called on resume
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-void s3c_pm_check_restore(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
-}
-
-/**
- * s3c_pm_check_cleanup() - free memory resources
- *
- * Free the resources that where allocated by the suspend
- * memory check code. We do this separately from the
- * s3c_pm_check_restore() function as we cannot call any
- * functions that might sleep during that resume.
- */
-void s3c_pm_check_cleanup(void)
-{
-	kfree(crcs);
-	crcs = NULL;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c
deleted file mode 100644
index c2ff92c3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c
+++ /dev/null
@@ -1,384 +0,0 @@
-
-/* linux/arch/arm/plat-s3c/pm-gpio.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON	(0x00)
-#define OFFS_DAT	(0x04)
-#define OFFS_UP		(0x08)
-
-static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon;
-
-	/* GPACON only has one bit per control / data and no PULLUPs.
-	 * GPACON[x] = 0 => Output, 1 => SFN */
-
-	/* first set all SFN bits to SFN */
-
-	gpcon = old_gpcon | gps_gpcon;
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* now set all the other bits */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_1bit = {
-	.save	= samsung_gpio_pm_1bit_save,
-	.resume = samsung_gpio_pm_1bit_resume,
-};
-
-static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon, old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	/* restore GPIO pull-up settings */
-	__raw_writel(chip->pm_save[2], base + OFFS_UP);
-
-	/* Create a change_mask of all the items that need to have
-	 * their CON value changed before their DAT value, so that
-	 * we minimise the work between the two settings.
-	 */
-
-	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-
-	/* Write the new CON settings */
-
-	gpcon = old_gpcon & ~change_mask;
-	gpcon |= gps_gpcon & change_mask;
-
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* Now change any items that require DAT,CON */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_2bit = {
-	.save	= samsung_gpio_pm_2bit_save,
-	.resume = samsung_gpio_pm_2bit_resume,
-};
-
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8)
-		chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
-	u32 old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-	return change_mask;
-}
-
-static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
-{
-	void __iomem *con = chip->base + (index * 4);
-	u32 old_gpcon = __raw_readl(con);
-	u32 gps_gpcon = chip->pm_save[index + 1];
-	u32 gpcon, mask;
-
-	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
-	gpcon = old_gpcon & ~mask;
-	gpcon |= gps_gpcon & mask;
-
-	__raw_writel(gpcon, con);
-}
-
-static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon[2];
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpdat = chip->pm_save[2];
-
-	/* First, modify the CON settings */
-
-	old_gpcon[0] = 0;
-	old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
-	samsung_gpio_pm_4bit_con(chip, 0);
-	if (chip->chip.ngpio > 8) {
-		old_gpcon[0] = __raw_readl(base - 4);
-		samsung_gpio_pm_4bit_con(chip, -1);
-	}
-
-	/* Now change the configurations that require DAT,CON */
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[1], base + OFFS_CON);
-	if (chip->chip.ngpio > 8)
-		__raw_writel(chip->pm_save[0], base - 4);
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[3], base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8) {
-		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[0], old_gpcon[1],
-			  __raw_readl(base - 4),
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-	} else
-		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[1],
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_4bit = {
-	.save	= samsung_gpio_pm_4bit_save,
-	.resume = samsung_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
-
-/**
- * samsung_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
-{
-	struct samsung_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->save == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->save(ourchip);
-}
-
-/**
- * samsung_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void samsung_pm_save_gpios(void)
-{
-	struct samsung_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = samsung_gpiolib_getchip(gpio_nr);
-		if (!ourchip) {
-			gpio_nr++;
-			continue;
-		}
-
-		samsung_pm_save_gpio(ourchip);
-
-		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
-			  ourchip->chip.label,
-			  ourchip->pm_save[0],
-			  ourchip->pm_save[1],
-			  ourchip->pm_save[2],
-			  ourchip->pm_save[3]);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
-
-/**
- * samsung_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
-{
-	struct samsung_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->resume == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->resume(ourchip);
-}
-
-void samsung_pm_restore_gpios(void)
-{
-	struct samsung_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = samsung_gpiolib_getchip(gpio_nr);
-		if (!ourchip) {
-			gpio_nr++;
-			continue;
-		}
-
-		samsung_pm_resume_gpio(ourchip);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c
deleted file mode 100644
index 64ab65f0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C common power management (suspend to ram) support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
-#include <asm/irq.h>
-
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-/* Debug code:
- *
- * This code supports debug output to the low level UARTs for use on
- * resume before the console layer is available.
-*/
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void s3c_pm_debug_init(void)
-{
-	/* restart uart clocks so we can use them to output */
-	s3c_pm_debug_init_uart();
-}
-
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_SAMSUNG_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-static void s3c_pm_save_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_save_uart(uart, save);
-}
-
-static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}
-
-static void s3c_pm_restore_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_restore_uart(uart, save);
-}
-#else
-static void s3c_pm_save_uarts(void) { }
-static void s3c_pm_restore_uarts(void) { }
-#endif
-
-/* The IRQ ext-int code goes here, it is too small to currently bother
- * with its own file. */
-
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int s3c_irqext_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", data->irq);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static void __maybe_unused s3c_pm_show_resume_irqs(int start,
-						   unsigned long which,
-						   unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-
-void (*pm_cpu_prep)(void);
-int (*pm_cpu_sleep)(unsigned long);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c_pm_enter(suspend_state_t state)
-{
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c_pm_debug_init();
-
-	S3C_PMDBG("%s(%d)\n", __func__, state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
-		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
-		return -EINVAL;
-	}
-
-	/* save all necessary core registers not covered by the drivers */
-
-	samsung_pm_save_gpios();
-	samsung_pm_saved_gpios();
-	s3c_pm_save_uarts();
-	s3c_pm_save_core();
-
-	/* set the irq configuration for wake */
-
-	s3c_pm_configure_extint();
-
-	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	s3c_pm_arch_prepare_irqs();
-
-	/* call cpu specific preparation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	s3c_pm_arch_stop_clocks();
-
-	/* this will also act as our return point from when
-	 * we resume as it saves its own register state and restores it
-	 * during the resume.  */
-
-	cpu_suspend(0, pm_cpu_sleep);
-
-	/* restore the system state */
-
-	s3c_pm_restore_core();
-	s3c_pm_restore_uarts();
-	samsung_pm_restore_gpios();
-	s3c_pm_restored_gpios();
-
-	s3c_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	s3c_pm_arch_show_resume_irqs();
-
-	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
-
-	/* LEDs should now be 1110 */
-	s3c_pm_debug_smdkled(1 << 1, 0);
-
-	s3c_pm_check_restore();
-
-	/* ok, let's return from sleep */
-
-	S3C_PMDBG("S3C PM Resume (post-restore)\n");
-	return 0;
-}
-
-static int s3c_pm_prepare(void)
-{
-	/* prepare check area if configured */
-
-	s3c_pm_check_prepare();
-	return 0;
-}
-
-static void s3c_pm_finish(void)
-{
-	s3c_pm_check_cleanup();
-}
-
-static const struct platform_suspend_ops s3c_pm_ops = {
-	.enter		= s3c_pm_enter,
-	.prepare	= s3c_pm_prepare,
-	.finish		= s3c_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-/* s3c_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c_pm_init(void)
-{
-	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
-
-	suspend_set_ops(&s3c_pm_ops);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c
deleted file mode 100644
index a35ff3bc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <plat/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_pwm_scaler_ops = {
-	.get_rate	= clk_pwm_scaler_get_rate,
-	.set_rate	= clk_pwm_scaler_set_rate,
-	.round_rate	= clk_pwm_scaler_round_rate,
-};
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct clk_ops clk_tdiv_ops = {
-	.get_rate	= clk_pwm_tdiv_get_rate,
-	.set_rate	= clk_pwm_tdiv_set_rate,
-	.round_rate	= clk_pwm_tdiv_round_rate,
-};
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.0",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.1",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.2",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.3",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.4",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	unsigned long mux_tclk;
-
-	if (soc_is_s3c24xx())
-		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		mux_tclk = 0;
-	else
-		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = mux_tclk << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_tin_ops = {
-	.set_parent	= clk_pwm_tin_set_parent,
-};
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.0",
-		.id	= 0,
-		.ops	= &clk_tin_ops,
-	},
-	[1]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.1",
-		.id	= 1,
-		.ops	= &clk_tin_ops,
-	},
-	[2]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.2",
-		.id	= 2,
-		.ops	= &clk_tin_ops,
-	},
-	[3]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.3",
-		.id	= 3,
-		.ops	= &clk_tin_ops,
-	},
-	[4]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.4",
-		.id	= 4,
-		.ops	= &clk_tin_ops,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
-		clk_timer_scaler[clk].parent = clk_timers;
-
-	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
-	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c
deleted file mode 100644
index c559d843..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/* arch/arm/plat-s3c/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-	/* the pwm hw only checks the compare register after a decrement,
-	   so the pin never toggles if tcmp = tcnt */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	clk_enable(pwm->clk);
-	clk_enable(pwm->clk_div);
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_disable(pwm->clk_div);
-	clk_disable(pwm->clk);
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_disable(pwm->clk_div);
-	clk_disable(pwm->clk);
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	/* No one preserve these values during suspend so reset them
-	 * Otherwise driver leaves PWM unconfigured if same values
-	 * passed to pwm_config
-	 */
-	pwm->period_ns = 0;
-	pwm->duty_ns = 0;
-
-	return 0;
-}
-
-static int s3c_pwm_resume(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-	unsigned long tcon;
-
-	/* Restore invertion */
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	return 0;
-}
-
-#else
-#define s3c_pwm_suspend NULL
-#define s3c_pwm_resume NULL
-#endif
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-	.suspend	= s3c_pwm_suspend,
-	.resume		= s3c_pwm_resume,
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c b/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c
deleted file mode 100644
index 78149491..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung S3C-DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-struct cb_data {
-	void (*fp) (void *);
-	void *fp_param;
-	unsigned ch;
-	struct list_head node;
-};
-
-static LIST_HEAD(dma_list);
-
-static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
-		       int size, enum s3c2410_dma_buffresult res)
-{
-	struct cb_data *data = param;
-
-	data->fp(data->fp_param);
-}
-
-static unsigned s3c_dma_request(enum dma_ch dma_ch,
-				 struct samsung_dma_info *info)
-{
-	struct cb_data *data;
-
-	if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
-		s3c2410_dma_free(dma_ch, info->client);
-		return 0;
-	}
-
-	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
-	data->ch = dma_ch;
-	list_add_tail(&data->node, &dma_list);
-
-	s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
-
-	if (info->cap == DMA_CYCLIC)
-		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-
-	s3c2410_dma_config(dma_ch, info->width);
-
-	return (unsigned)dma_ch;
-}
-
-static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
-{
-	struct cb_data *data;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-	list_del(&data->node);
-
-	s3c2410_dma_free(ch, client);
-	kfree(data);
-
-	return 0;
-}
-
-static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
-{
-	struct cb_data *data;
-	int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-
-	if (!data->fp) {
-		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
-		data->fp = info->fp;
-		data->fp_param = info->fp_param;
-	}
-
-	s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
-
-	return 0;
-}
-
-static inline int s3c_dma_trigger(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
-}
-
-static inline int s3c_dma_started(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
-}
-
-static inline int s3c_dma_flush(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
-}
-
-static inline int s3c_dma_stop(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
-}
-
-static struct samsung_dma_ops s3c_dma_ops = {
-	.request	= s3c_dma_request,
-	.release	= s3c_dma_release,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.started	= s3c_dma_started,
-	.flush		= s3c_dma_flush,
-	.stop		= s3c_dma_stop,
-};
-
-void *s3c_dma_get_ops(void)
-{
-	return &s3c_dma_ops;
-}
-EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/time.c b/ANDROID_3.4.5/arch/arm/plat-samsung/time.c
deleted file mode 100644
index 4dcb11c3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/time.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- *	Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
-	unsigned long den = pclk / 1000;
-
-	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
-	unsigned long res;
-
-	res = ticks * timer_usec_ticks;
-	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
-
-	return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond  since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static unsigned long s3c2410_gettimeoffset (void)
-{
-	unsigned long tdone;
-	unsigned long tval;
-
-	/* work out how many ticks have gone since last timer interrupt */
-
-	tval =  __raw_readl(S3C2410_TCNTO(4));
-	tdone = timer_startval - tval;
-
-	/* check to see if there is an interrupt pending */
-
-	if (s3c24xx_ostimer_pending()) {
-		/* re-read the timer, and try and fix up for the missed
-		 * interrupt. Note, the interrupt may go off before the
-		 * timer has re-loaded from wrapping.
-		 */
-
-		tval =  __raw_readl(S3C2410_TCNTO(4));
-		tdone = timer_startval - tval;
-
-		if (tval != 0)
-			tdone += timer_startval;
-	}
-
-	return timer_ticks_to_usec(tdone);
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
-	.name		= "S3C2410 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
-	machine_is_bast()	|| \
-	machine_is_vr1000()	|| \
-	machine_is_anubis()	|| \
-	machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
-	unsigned long tcon;
-	unsigned long tcnt;
-	unsigned long tcfg1;
-	unsigned long tcfg0;
-
-	tcnt = TICK_MAX;  /* default value for tcnt */
-
-	/* configure the system for whichever machine is in use */
-
-	if (use_tclk1_12()) {
-		/* timer is at 12MHz, scaler is 1 */
-		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
-		tcnt = 12000000 / HZ;
-
-		tcfg1 = __raw_readl(S3C2410_TCFG1);
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
-		__raw_writel(tcfg1, S3C2410_TCFG1);
-	} else {
-		unsigned long pclk;
-		struct clk *tscaler;
-
-		/* for the h1940 (and others), we use the pclk from the core
-		 * to generate the timer values. since values around 50 to
-		 * 70MHz are not values we can directly generate the timer
-		 * value from, we need to pre-scale and divide before using it.
-		 *
-		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
-		 * (8.45 ticks per usec)
-		 */
-
-		pclk = clk_get_rate(timerclk);
-
-		/* configure clock tick */
-
-		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
-		tscaler = clk_get_parent(tdiv);
-
-		clk_set_rate(tscaler, pclk / 3);
-		clk_set_rate(tdiv, pclk / 6);
-		clk_set_parent(tin, tdiv);
-
-		tcnt = clk_get_rate(tin) / HZ;
-	}
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	/* timers reload after counting zero, so reduce the count by 1 */
-
-	tcnt--;
-
-	printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
-	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
-	/* check to see if timer is within 16bit range... */
-	if (tcnt > TICK_MAX) {
-		panic("setup_timer: HZ is too small, cannot configure timer!");
-		return;
-	}
-
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-
-	timer_startval = tcnt;
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-
-	/* ensure timer is stopped... */
-
-	tcon &= ~(7<<20);
-	tcon |= S3C2410_TCON_T4RELOAD;
-	tcon |= S3C2410_TCON_T4MANUALUPD;
-
-	__raw_writel(tcon, S3C2410_TCON);
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-	__raw_writel(tcnt, S3C2410_TCMPB(4));
-
-	/* start the timer running */
-	tcon |= S3C2410_TCON_T4START;
-	tcon &= ~S3C2410_TCON_T4MANUALUPD;
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
-	struct platform_device tmpdev;
-
-	tmpdev.dev.bus = &platform_bus_type;
-	tmpdev.id = 4;
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get clock for system timer");
-
-	clk_enable(timerclk);
-
-	if (!use_tclk1_12()) {
-		tmpdev.id = 4;
-		tmpdev.dev.init_name = "s3c24xx-pwm.4";
-		tin = clk_get(&tmpdev.dev, "pwm-tin");
-		if (IS_ERR(tin))
-			panic("failed to get pwm-tin clock for system timer");
-
-		tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
-		if (IS_ERR(tdiv))
-			panic("failed to get pwm-tdiv clock for system timer");
-	}
-
-	clk_enable(tin);
-}
-
-static void __init s3c2410_timer_init(void)
-{
-	s3c2410_timer_resources();
-	s3c2410_timer_setup();
-	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-}
-
-struct sys_timer s3c24xx_timer = {
-	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
-	.resume		= s3c2410_timer_setup
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c b/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c
deleted file mode 100644
index 20c3d911..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-samsung/wakeup-mask.c
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Support for wakeup mask interrupts on newer SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
-
-void samsung_sync_wakemask(void __iomem *reg,
-			   struct samsung_wakeup_mask *mask, int nr_mask)
-{
-	struct irq_data *data;
-	u32 val;
-
-	val = __raw_readl(reg);
-
-	for (; nr_mask > 0; nr_mask--, mask++) {
-		if (mask->irq == NO_WAKEUP_IRQ) {
-			val |= mask->bit;
-			continue;
-		}
-
-		data = irq_get_irq_data(mask->irq);
-
-		/* bit of a liberty to read this directly from irq_data. */
-		if (irqd_is_wakeup_set(data))
-			val &= ~mask->bit;
-		else
-			val |= mask->bit;
-	}
-
-	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
-	__raw_writel(val, reg);
-}