init android origin source code

1 files changed, 1609 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c
new file mode 100644
index 00000000..8c6202bb
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c
@@ -0,0 +1,1609 @@
+/*
+ * mackerel board support
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on ap4evb
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
+#include <linux/pm_clock.h>
+#include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/tca6416_keypad.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <media/soc_camera_platform.h>
+#include <sound/sh_fsi.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/sh7372.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+/*
+ * Address	Interface		BusWidth	note
+ * ------------------------------------------------------------------
+ * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
+ * 0x0800_0000	user area		-
+ * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
+ * 0x1400_0000	Ether (LAN9220)		16bit
+ * 0x1600_0000	user area		-		cannot use with NAND
+ * 0x1800_0000	user area		-
+ * 0x1A00_0000	-
+ * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
+ */
+
+/*
+ * CPU mode
+ *
+ * SW4                                     | Boot Area| Master   | Remarks
+ *  1  | 2   | 3   | 4   | 5   | 6   | 8   |          | Processor|
+ * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
+ * ON  | ON  | OFF | ON  | ON  | OFF | OFF | External | System   | External ROM
+ * ON  | ON  | ON  | ON  | ON  | OFF | OFF | External | System   | ROM Debug
+ * ON  | ON  | X   | ON  | OFF | OFF | OFF | Built-in | System   | ROM Debug
+ * X   | OFF | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
+ * OFF | X   | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
+ * X   | X   | X   | OFF | X   | X   | OFF | Built-in | System   | MaskROM
+ * OFF | ON  | OFF | X   | X   | OFF | ON  | External | System   | Standalone
+ * ON  | OFF | OFF | X   | X   | OFF | ON  | External | Realtime | Standalone
+*/
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1		SMSC 9220
+ * -----------------------
+ *  ON		access disable
+ *  OFF		access enable
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * External interrupt pin settings
+ *
+ * IRQX  | pin setting        | device             | level
+ * ------+--------------------+--------------------+-------
+ * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
+ * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
+ * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Touch Panel    | Low
+ * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
+ * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
+ * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
+ * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975)     | High
+ */
+
+/*
+ * USB
+ *
+ * USB0 : CN22 : Function
+ * USB1 : CN31 : Function/Host *1
+ *
+ * J30 (for CN31) *1
+ * ----------+---------------+-------------
+ * 1-2 short | VBUS 5V       | Host
+ * open      | external VBUS | Function
+ *
+ * CAUTION
+ *
+ * renesas_usbhs driver can use external interrupt mode
+ * (which come from USB-PHY) or autonomy mode (it use own interrupt)
+ * for detecting connection/disconnection when Function.
+ * USB will be power OFF while it has been disconnecting
+ * if external interrupt mode, and it is always power ON if autonomy mode,
+ *
+ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
+ * because Touchscreen is using IRQ7-PORT40.
+ * It is impossible to use IRQ7 demux on this board.
+ */
+
+/*
+ * SDHI0 (CN12)
+ *
+ * SW56 : OFF
+ *
+ */
+
+/* MMC /SDHI1 (CN7)
+ *
+ * I/O voltage : 1.8v
+ *
+ * Power voltage : 1.8v or 3.3v
+ *  J22 : select power voltage *1
+ *	1-2 pin : 1.8v
+ *	2-3 pin : 3.3v
+ *
+ * *1
+ * Please change J22 depends the card to be used.
+ * MMC's OCR field set to support either voltage for the card inserted.
+ *
+ *	SW1	|	SW33
+ *		| bit1 | bit2 | bit3 | bit4
+ * -------------+------+------+------+-------
+ * MMC0   OFF	|  OFF |   X  |  ON  |  X       (Use MMCIF)
+ * SDHI1  OFF	|  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
+ *
+ */
+
+/*
+ * SDHI2 (CN23)
+ *
+ * microSD card sloct
+ *
+ */
+
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * gpio_pull_down
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+static void __init gpio_pull_down(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xA0;
+
+	__raw_writeb(data, addr);
+}
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* SMSC */
+static struct resource smc911x_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x16000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x02c0) /* IRQ6A */,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(smc911x_resources),
+	.resource       = smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* MERAM */
+static struct sh_mobile_meram_info mackerel_meram_info = {
+	.addr_mode	= SH_MOBILE_MERAM_MODE1,
+};
+
+static struct resource meram_resources[] = {
+	[0] = {
+		.name	= "regs",
+		.start	= 0xe8000000,
+		.end	= 0xe807ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "meram",
+		.start	= 0xe8080000,
+		.end	= 0xe81fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device meram_device = {
+	.name		= "sh_mobile_meram",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(meram_resources),
+	.resource	= meram_resources,
+	.dev		= {
+		.platform_data = &mackerel_meram_info,
+	},
+};
+
+/* LCDC */
+static struct fb_videomode mackerel_lcdc_modes[] = {
+	{
+		.name		= "WVGA Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0,
+	},
+};
+
+static int mackerel_set_brightness(int brightness)
+{
+	gpio_set_value(GPIO_PORT31, brightness);
+
+	return 0;
+}
+
+static int mackerel_get_brightness(void)
+{
+	return gpio_get_value(GPIO_PORT31);
+}
+
+static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
+	.icb[0] = {
+		.meram_size     = 0x40,
+	},
+	.icb[1] = {
+		.meram_size     = 0x40,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.meram_dev = &mackerel_meram_info,
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.lcd_modes = mackerel_lcdc_modes,
+		.num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
+		.interface_type		= RGB24,
+		.clock_divider		= 3,
+		.flags			= 0,
+		.panel_cfg = {
+			.width		= 152,
+			.height		= 91,
+		},
+		.bl_info = {
+			.name = "sh_mobile_lcdc_bl",
+			.max_brightness = 1,
+			.set_brightness = mackerel_set_brightness,
+			.get_brightness = mackerel_get_brightness,
+		},
+		.meram_cfg = &lcd_meram_cfg,
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* HDMI */
+static struct sh_mobile_hdmi_info hdmi_info = {
+	.flags		= HDMI_SND_SRC_SPDIF,
+};
+
+static struct resource hdmi_resources[] = {
+	[0] = {
+		.name	= "HDMI",
+		.start	= 0xe6be0000,
+		.end	= 0xe6be00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+		.start	= evt2irq(0x17e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_device = {
+	.name		= "sh-mobile-hdmi",
+	.num_resources	= ARRAY_SIZE(hdmi_resources),
+	.resource	= hdmi_resources,
+	.id             = -1,
+	.dev	= {
+		.platform_data	= &hdmi_info,
+	},
+};
+
+static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
+	.icb[0] = {
+		.meram_size     = 0x100,
+	},
+	.icb[1] = {
+		.meram_size     = 0x100,
+	},
+};
+
+static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
+	.meram_dev = &mackerel_meram_info,
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+		.meram_cfg = &hdmi_meram_cfg,
+		.tx_dev = &hdmi_device,
+	}
+};
+
+static struct resource hdmi_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC1",
+		.start	= 0xfe944000,
+		.end	= 0xfe947fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x1780),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
+	.resource	= hdmi_lcdc_resources,
+	.id		= 1,
+	.dev	= {
+		.platform_data	= &hdmi_lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct platform_device fsi_hdmi_device = {
+	.name		= "sh_fsi2_b_hdmi",
+};
+
+static void __init hdmi_init_pm_clock(void)
+{
+	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+	int ret;
+	long rate;
+
+	if (IS_ERR(hdmi_ick)) {
+		ret = PTR_ERR(hdmi_ick);
+		pr_err("Cannot get HDMI ICK: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set PLLC2 parent: %d, %d users\n",
+		       ret, sh7372_pllc2_clk.usecount);
+		goto out;
+	}
+
+	pr_debug("PLLC2 initial frequency %lu\n",
+		 clk_get_rate(&sh7372_pllc2_clk));
+
+	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
+	if (rate < 0) {
+		pr_err("Cannot get suitable rate: %ld\n", rate);
+		ret = rate;
+		goto out;
+	}
+
+	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
+	if (ret < 0) {
+		pr_err("Cannot set rate %ld: %d\n", rate, ret);
+		goto out;
+	}
+
+	pr_debug("PLLC2 set frequency %lu\n", rate);
+
+	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
+	if (ret < 0)
+		pr_err("Cannot set HDMI parent: %d\n", ret);
+
+out:
+	if (!IS_ERR(hdmi_ick))
+		clk_put(hdmi_ick);
+}
+
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+	unsigned int usbphyaddr;
+	unsigned int usbcrcaddr;
+	struct renesas_usbhs_platform_info info;
+	struct delayed_work work;
+	struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev)				\
+	container_of(renesas_usbhs_get_info(pdev),	\
+		     struct usbhs_private, info)
+
+#define usbhs_is_connected(priv)			\
+	(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+	return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	/* init phy */
+	__raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+	struct usbhs_private *priv = container_of(work, struct usbhs_private,
+						  work.work);
+
+	renesas_usbhs_call_notify_hotplug(priv->pdev);
+	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	priv->pdev = pdev;
+	INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+	return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+	.usbcrcaddr	= 0xe605810c,		/* USBCR2 */
+	.info = {
+		.platform_callback = {
+			.hardware_init	= usbhs0_hardware_init,
+			.hardware_exit	= usbhs0_hardware_exit,
+			.phy_reset	= usbhs_phy_reset,
+			.get_id		= usbhs0_get_id,
+			.get_vbus	= usbhs_get_vbus,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+			.d0_tx_id	= SHDMA_SLAVE_USB0_TX,
+			.d1_rx_id	= SHDMA_SLAVE_USB0_RX,
+		},
+	},
+};
+
+static struct resource usbhs0_resources[] = {
+	[0] = {
+		.name	= "USBHS0",
+		.start	= 0xe6890000,
+		.end	= 0xe68900e6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ca0) /* USB0_USB0I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs0_device = {
+	.name	= "renesas_usbhs",
+	.id	= 0,
+	.dev = {
+		.platform_data		= &usbhs0_private.info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs0_resources),
+	.resource	= usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ */
+#define IRQ8 evt2irq(0x0300)
+#define USB_PHY_MODE		(1 << 4)
+#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
+#define USB_PHY_ON		(1 << 1)
+#define USB_PHY_OFF		(1 << 0)
+#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
+
+static irqreturn_t usbhs1_interrupt(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	renesas_usbhs_call_notify_hotplug(pdev);
+
+	/* clear status */
+	__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
+		     priv->usbphyaddr);
+
+	return IRQ_HANDLED;
+}
+
+static int usbhs1_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	int ret;
+
+	/* clear interrupt status */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
+
+	ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
+			  dev_name(&pdev->dev), pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq err\n");
+		return ret;
+	}
+
+	/* enable USB phy interrupt */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
+
+	return 0;
+}
+
+static void usbhs1_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	/* clear interrupt status */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
+
+	free_irq(IRQ8, pdev);
+}
+
+static int usbhs1_get_id(struct platform_device *pdev)
+{
+	return USBHS_HOST;
+}
+
+static u32 usbhs1_pipe_cfg[] = {
+	USB_ENDPOINT_XFER_CONTROL,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs1_private = {
+	.usbphyaddr	= 0xe60581e2,		/* USBPHY1INTAP */
+	.usbcrcaddr	= 0xe6058130,		/* USBCR4 */
+	.info = {
+		.platform_callback = {
+			.hardware_init	= usbhs1_hardware_init,
+			.hardware_exit	= usbhs1_hardware_exit,
+			.get_id		= usbhs1_get_id,
+			.phy_reset	= usbhs_phy_reset,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+			.has_otg	= 1,
+			.pipe_type	= usbhs1_pipe_cfg,
+			.pipe_size	= ARRAY_SIZE(usbhs1_pipe_cfg),
+			.d0_tx_id	= SHDMA_SLAVE_USB1_TX,
+			.d1_rx_id	= SHDMA_SLAVE_USB1_RX,
+		},
+	},
+};
+
+static struct resource usbhs1_resources[] = {
+	[0] = {
+		.name	= "USBHS1",
+		.start	= 0xe68b0000,
+		.end	= 0xe68b00e6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs1_device = {
+	.name	= "renesas_usbhs",
+	.id	= 1,
+	.dev = {
+		.platform_data		= &usbhs1_private.info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs1_resources),
+	.resource	= usbhs1_resources,
+};
+
+/* LED */
+static struct gpio_led mackerel_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= GPIO_PORT0,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led1",
+		.gpio		= GPIO_PORT1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led2",
+		.gpio		= GPIO_PORT2,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led3",
+		.gpio		= GPIO_PORT159,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data mackerel_leds_pdata = {
+	.leds = mackerel_leds,
+	.num_leds = ARRAY_SIZE(mackerel_leds),
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &mackerel_leds_pdata,
+	},
+};
+
+/* FSI */
+#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	int ret;
+
+	if (rate <= 0)
+		return 0;
+
+	if (!enable) {
+		clk_disable(clk);
+		return 0;
+	}
+
+	ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+	if (ret < 0)
+		return ret;
+
+	return clk_enable(clk);
+}
+
+static int fsi_b_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsib_clk;
+	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
+	int ret;
+
+	/* clock start */
+	switch (rate) {
+	case 44100:
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	case 48000:
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	default:
+		pr_err("unsupported rate in FSI2 port B\n");
+		return -EINVAL;
+	}
+
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	/* fsib */
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
+	if (ret < 0)
+		goto fsi_set_rate_end;
+
+	/* FSI DIV */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		goto fsi_set_rate_end;
+	}
+
+	ret = ackmd_bpfmd;
+
+fsi_set_rate_end:
+	clk_put(fsib_clk);
+	return ret;
+}
+
+static struct sh_fsi_platform_info fsi_info = {
+	.port_a = {
+		.flags = SH_FSI_BRS_INV,
+	},
+	.port_b = {
+		.flags = SH_FSI_BRS_INV	|
+			SH_FSI_BRM_INV	|
+			SH_FSI_LRS_INV	|
+			SH_FSI_FMT_SPDIF,
+		.set_rate = fsi_b_set_rate,
+	}
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_FSI,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct fsi_ak4642_info fsi2_ak4643_info = {
+	.name		= "AK4643",
+	.card		= "FSI2A-AK4643",
+	.cpu_dai	= "fsia-dai",
+	.codec		= "ak4642-codec.0-0013",
+	.platform	= "sh_fsi2",
+	.id		= FSI_PORT_A,
+};
+
+static struct platform_device fsi_ak4643_device = {
+	.name	= "fsi-ak4642-audio",
+	.dev	= {
+		.platform_data	= &fsi2_ak4643_info,
+	},
+};
+
+/* FLCTL */
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "system",
+		.offset	= 0,
+		.size	= 128 * 1024 * 1024,
+	},
+	{
+		.name	= "userdata",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 256 * 1024 * 1024,
+	},
+	{
+		.name	= "cache",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 128 * 1024 * 1024,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xe6a30000,
+		.end	= 0xe6a3009b,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= CLK_16B_12L_4H | TYPESEL_SET
+			| SHBUSSEL | SEL_16BIT | SNAND_E,
+	.use_holden	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO_PORT41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+	return !gpio_get_value(GPIO_PORT41);
+}
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.cd_gpio	= GPIO_PORT172,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xe6850000,
+		.end	= 0xe68500ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0xe6860000,
+		.end	= 0xe68600ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi1_resources),
+	.resource	= sdhi1_resources,
+	.id		= 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+#endif
+
+/*
+ * The card detect pin of the top SD/MMC slot (CN23) is active low and is
+ * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
+ */
+static int slot_cn23_get_cd(struct platform_device *pdev)
+{
+	return !gpio_get_value(GPIO_PORT162);
+}
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn23_get_cd,
+};
+
+static struct resource sdhi2_resources[] = {
+	[0] = {
+		.name	= "SDHI2",
+		.start	= 0xe6870000,
+		.end	= 0xe68700ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= evt2irq(0x1200), /* SDHI2_SDHI2I0 */
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= evt2irq(0x1220), /* SDHI2_SDHI2I1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= evt2irq(0x1240), /* SDHI2_SDHI2I2 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi2_device = {
+	.name	= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi2_resources),
+	.resource	= sdhi2_resources,
+	.id		= 2,
+	.dev	= {
+		.platform_data	= &sdhi2_info,
+	},
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xE6BD0000,
+		.end	= 0xE6BD00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1ac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1ae0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+
+static int mackerel_camera_add(struct soc_camera_device *icd);
+static void mackerel_camera_del(struct soc_camera_device *icd);
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	return 0; /* camera sensor always enabled */
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.code = V4L2_MBUS_FMT_UYVY8_2X8,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.field = V4L2_FIELD_NONE,
+		.width = 640,
+		.height = 480,
+	},
+	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+	V4L2_MBUS_DATA_ACTIVE_HIGH,
+	.mbus_type = V4L2_MBUS_PARALLEL,
+	.set_capture = camera_set_capture,
+};
+
+static struct soc_camera_link camera_link = {
+	.bus_id		= 0,
+	.add_device	= mackerel_camera_add,
+	.del_device	= mackerel_camera_del,
+	.module_name	= "soc_camera_platform",
+	.priv		= &camera_info,
+};
+
+static struct platform_device *camera_device;
+
+static void mackerel_camera_release(struct device *dev)
+{
+	soc_camera_platform_release(&camera_device);
+}
+
+static int mackerel_camera_add(struct soc_camera_device *icd)
+{
+	return soc_camera_platform_add(icd, &camera_device, &camera_link,
+				       mackerel_camera_release, 0);
+}
+
+static void mackerel_camera_del(struct soc_camera_device *icd)
+{
+	soc_camera_platform_del(icd, camera_device, &camera_link);
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = intcs_evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data		= &sh_mobile_ceu_info,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct platform_device mackerel_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &camera_link,
+	},
+};
+
+static struct platform_device *mackerel_devices[] __initdata = {
+	&nor_flash_device,
+	&smc911x_device,
+	&lcdc_device,
+	&usbhs1_device,
+	&usbhs0_device,
+	&leds_device,
+	&fsi_device,
+	&fsi_ak4643_device,
+	&fsi_hdmi_device,
+	&nand_flash_device,
+	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sdhi1_device,
+#endif
+	&sdhi2_device,
+	&sh_mmcif_device,
+	&ceu_device,
+	&mackerel_camera,
+	&hdmi_device,
+	&hdmi_lcdc_device,
+	&meram_device,
+};
+
+/* Keypad Initialization */
+#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
+{								\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+}
+
+#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
+
+static struct tca6416_button mackerel_gpio_keys[] = {
+	KEYPAD_BUTTON_LOW(KEY_HOME),
+	KEYPAD_BUTTON_LOW(KEY_MENU),
+	KEYPAD_BUTTON_LOW(KEY_BACK),
+	KEYPAD_BUTTON_LOW(KEY_POWER),
+};
+
+static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
+	.buttons	= mackerel_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(mackerel_gpio_keys),
+	.rep		= 1,
+	.use_polling	= 0,
+	.pinmask	= 0x000F,
+};
+
+/* I2C */
+#define IRQ7 evt2irq(0x02e0)
+#define IRQ9 evt2irq(0x0320)
+
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x13),
+	},
+	/* Keypad */
+	{
+		I2C_BOARD_INFO("tca6408-keys", 0x20),
+		.platform_data = &mackerel_tca6416_keys_info,
+		.irq = IRQ9,
+	},
+	/* Touchscreen */
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = IRQ7,
+	},
+};
+
+#define IRQ21 evt2irq(0x32a0)
+
+static struct i2c_board_info i2c1_devices[] = {
+	/* Accelerometer */
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ21,
+	},
+};
+
+#define GPIO_PORT9CR	0xE6051009
+#define GPIO_PORT10CR	0xE605100A
+#define GPIO_PORT167CR	0xE60520A7
+#define GPIO_PORT168CR	0xE60520A8
+#define SRCR4		0xe61580bc
+#define USCCR1		0xE6058144
+static void __init mackerel_init(void)
+{
+	u32 srcr4;
+	struct clk *clk;
+
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+
+	sh7372_pinmux_init();
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_FN_CS5A,	NULL);
+	gpio_request(GPIO_FN_IRQ6_39,	NULL);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+
+	gpio_request(GPIO_PORT31, NULL); /* backlight */
+	gpio_direction_output(GPIO_PORT31, 0); /* off by default */
+
+	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT151, 1);
+
+	/* USBHS0 */
+	gpio_request(GPIO_FN_VBUS0_0, NULL);
+	gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+
+	/* USBHS1 */
+	gpio_request(GPIO_FN_VBUS0_1, NULL);
+	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+	gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+	/* enable FSI2 port A (ak4643) */
+	gpio_request(GPIO_FN_FSIAIBT,	NULL);
+	gpio_request(GPIO_FN_FSIAILR,	NULL);
+	gpio_request(GPIO_FN_FSIAISLD,	NULL);
+	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	gpio_request(GPIO_PORT161,	NULL);
+	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+	gpio_request(GPIO_PORT9,  NULL);
+	gpio_request(GPIO_PORT10, NULL);
+	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
+
+	/* setup FSI2 port B (HDMI) */
+	gpio_request(GPIO_FN_FSIBCK, NULL);
+	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
+	/* set SPU2 clock to 119.6 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 119600000));
+		clk_put(clk);
+	}
+
+	/* enable Keypad */
+	gpio_request(GPIO_FN_IRQ9_42,	NULL);
+	irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
+
+	/* enable Touchscreen */
+	gpio_request(GPIO_FN_IRQ7_40,	NULL);
+	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
+
+	/* enable Accelerometer */
+	gpio_request(GPIO_FN_IRQ21,	NULL);
+	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
+
+	/* enable SDHI0 */
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	/* enable SDHI1 */
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+#endif
+	/* card detect pin for MMC slot (CN7) */
+	gpio_request(GPIO_PORT41, NULL);
+	gpio_direction_input(GPIO_PORT41);
+
+	/* enable SDHI2 */
+	gpio_request(GPIO_FN_SDHICMD2, NULL);
+	gpio_request(GPIO_FN_SDHICLK2, NULL);
+	gpio_request(GPIO_FN_SDHID2_3, NULL);
+	gpio_request(GPIO_FN_SDHID2_2, NULL);
+	gpio_request(GPIO_FN_SDHID2_1, NULL);
+	gpio_request(GPIO_FN_SDHID2_0, NULL);
+
+	/* card detect pin for microSD slot (CN23) */
+	gpio_request(GPIO_PORT162, NULL);
+	gpio_direction_input(GPIO_PORT162);
+
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_D0_NAF0, NULL);
+	gpio_request(GPIO_FN_D1_NAF1, NULL);
+	gpio_request(GPIO_FN_D2_NAF2, NULL);
+	gpio_request(GPIO_FN_D3_NAF3, NULL);
+	gpio_request(GPIO_FN_D4_NAF4, NULL);
+	gpio_request(GPIO_FN_D5_NAF5, NULL);
+	gpio_request(GPIO_FN_D6_NAF6, NULL);
+	gpio_request(GPIO_FN_D7_NAF7, NULL);
+	gpio_request(GPIO_FN_D8_NAF8, NULL);
+	gpio_request(GPIO_FN_D9_NAF9, NULL);
+	gpio_request(GPIO_FN_D10_NAF10, NULL);
+	gpio_request(GPIO_FN_D11_NAF11, NULL);
+	gpio_request(GPIO_FN_D12_NAF12, NULL);
+	gpio_request(GPIO_FN_D13_NAF13, NULL);
+	gpio_request(GPIO_FN_D14_NAF14, NULL);
+	gpio_request(GPIO_FN_D15_NAF15, NULL);
+	gpio_request(GPIO_FN_FCE0, NULL);
+	gpio_request(GPIO_FN_WE0_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+	gpio_request(GPIO_FN_A4_FOE, NULL);
+	gpio_request(GPIO_FN_A5_FCDE, NULL);
+	gpio_request(GPIO_FN_RD_FSC, NULL);
+
+	/* enable GPS module (GT-720F) */
+	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK, NULL);
+	gpio_request(GPIO_FN_VIO_VD, NULL);
+	gpio_request(GPIO_FN_VIO_HD, NULL);
+	gpio_request(GPIO_FN_VIO_FIELD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D7, NULL);
+	gpio_request(GPIO_FN_VIO_D6, NULL);
+	gpio_request(GPIO_FN_VIO_D5, NULL);
+	gpio_request(GPIO_FN_VIO_D4, NULL);
+	gpio_request(GPIO_FN_VIO_D3, NULL);
+	gpio_request(GPIO_FN_VIO_D2, NULL);
+	gpio_request(GPIO_FN_VIO_D1, NULL);
+	gpio_request(GPIO_FN_VIO_D0, NULL);
+
+	/* HDMI */
+	gpio_request(GPIO_FN_HDMI_HPD, NULL);
+	gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+	srcr4 = __raw_readl(SRCR4);
+	__raw_writel(srcr4 | (1 << 13), SRCR4);
+	udelay(50);
+	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+	sh7372_add_standard_devices();
+
+	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+
+	sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
+	sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
+	sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
+	sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
+	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
+#endif
+	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
+	sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
+
+	hdmi_init_pm_clock();
+	sh7372_pm_init();
+	pm_clk_add(&fsi_device.dev, "spu2");
+	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
+}
+
+MACHINE_START(MACKEREL, "mackerel")
+	.map_io		= sh7372_map_io,
+	.init_early	= sh7372_add_early_devices,
+	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= mackerel_init,
+	.timer		= &shmobile_timer,
+MACHINE_END