init android origin source code

36 files changed, 5284 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig
new file mode 100644
index 00000000..c87f6108
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig
@@ -0,0 +1,102 @@
+# arch/arm/mach-s5p64x0/Kconfig
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P64X0
+
+config CPU_S5P6440
+	bool
+	select SAMSUNG_DMADEV
+	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
+	help
+	  Enable S5P6440 CPU support
+
+config CPU_S5P6450
+	bool
+	select SAMSUNG_DMADEV
+	select S5P_HRT
+	select S5P_SLEEP if PM
+	select SAMSUNG_WAKEMASK if PM
+	help
+	  Enable S5P6450 CPU support
+
+config S5P64X0_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5P64X0 based boards with a LCD display
+	  through RGB interface.
+
+config S5P64X0_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5P64X0_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
+config S5P64X0_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
+	help
+	  Machine support for the Samsung SMDK6440
+
+config MACH_SMDK6450
+	bool "SMDK6450"
+	select CPU_S5P6450
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
+	help
+	  Machine support for the Samsung SMDK6450
+
+menu "Use 8-bit SDHCI bus width"
+
+config S5P64X0_SD_CH1_8BIT
+	bool "SDHCI Channel 1 (Slot 1)"
+	depends on MACH_SMDK6450 || MACH_SMDK6440
+	help
+	  Support SDHCI Channel 1 8-bit bus.
+	  If selected, Channel 2 is disabled.
+
+endmenu
+
+endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile
new file mode 100644
index 00000000..12bb9511
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile
@@ -0,0 +1,36 @@
+# arch/arm/mach-s5p64x0/Makefile
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core
+
+obj-y				+= common.o clock.o
+obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
+obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+
+obj-$(CONFIG_PM)		+= pm.o irq-pm.o
+
+obj-y				+= dma.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
+
+# device support
+
+obj-y				+= dev-audio.o
+
+obj-y					+= setup-i2c0.o
+obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5P64X0_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot
new file mode 100644
index 00000000..79ece405
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	+= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c
new file mode 100644
index 00000000..ee1e8e7f
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -0,0 +1,617 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "nand",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_mem_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "post",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 5)
+	}, {
+		.name		= "2d",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "dma",
+		.devname	= "dma-pl330",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.2",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "otg",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20)
+	}, {
+		.name		= "irom",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "lcd",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hclk_fimgvg",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "watchdog",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "timers",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "pcm",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "adc",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.devname	= "s3c64xx-spi.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.devname	= "s3c64xx-spi.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "gps",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "dsim",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "etm",
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dmc0",
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "pclk_fimgvg",
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "mmc_48m",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "mmc_48m",
+		.devname	= "s3c-sdhci.1",
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "mmc_48m",
+		.devname	= "s3c-sdhci.2",
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	},
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.2",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.3",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "gpio",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+};
+
+static struct clk *clkset_group1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_post",
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
+	},
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.0",
+		.ctrlbit	= (1 << 24),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group1,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.1",
+		.ctrlbit	= (1 << 25),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group1,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.2",
+		.ctrlbit	= (1 << 26),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group1,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 5),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.0",
+		.ctrlbit	= (1 << 20),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group1,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.1",
+		.ctrlbit	= (1 << 21),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group1,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+};
+
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+	&clk_sclk_mmc0,
+	&clk_sclk_mmc1,
+	&clk_sclk_mmc2
+};
+
+static struct clk_lookup s5p6440_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
+
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
+	s3c_pwmclk_init();
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c
new file mode 100644
index 00000000..dae6a13f
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -0,0 +1,680 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6450 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+static struct clksrc_clk clk_mout_dpll = {
+	.clk	= {
+		.name		= "mout_dpll",
+	},
+	.sources	= &clk_src_dpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
+};
+
+static u32 epll_div[][5] = {
+	{ 133000000,	27307,	55, 2, 2 },
+	{ 100000000,	43691,	41, 2, 2 },
+	{ 480000000,	0,	80, 2, 0 },
+};
+
+static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6450_epll_ops = {
+	.get_rate = s5p_epll_get_rate,
+	.set_rate = s5p6450_epll_set_rate,
+};
+
+static struct clksrc_clk clk_dout_epll = {
+	.clk	= {
+		.name		= "dout_epll",
+		.parent		= &clk_mout_epll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_mout_hclk_sel = {
+	.clk	= {
+		.name		= "mout_hclk_sel",
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
+};
+
+static struct clk *clkset_hclk_list[] = {
+	&clk_mout_hclk_sel.clk,
+	&clk_armclk.clk,
+};
+
+static struct clksrc_sources clkset_hclk = {
+	.sources	= clkset_hclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_list),
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+	},
+	.sources	= &clkset_hclk,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_dout_pwm_ratio0 = {
+	.clk	= {
+		.name		= "clk_dout_pwm_ratio0",
+		.parent		= &clk_mout_hclk_sel.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_to_wdt_pwm = {
+	.clk	= {
+		.name		= "clk_pclk_to_wdt_pwm",
+		.parent		= &clk_dout_pwm_ratio0.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "usbhost",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "dma",
+		.devname	= "dma-pl330",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.1",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.devname	= "s3c-sdhci.2",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "usbotg",
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "lcd",
+		.parent		= &clk_h,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "watchdog",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "adc",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.devname	= "s3c64xx-spi.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.devname	= "s3c64xx-spi.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "iis",
+		.devname	= "samsung-i2s.2",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "i2c",
+		.devname	= "s3c2440-i2c.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "dmc0",
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.0",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.1",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.2",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.devname	= "s3c6400-uart.3",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "timers",
+		.parent		= &clk_pclk_to_wdt_pwm.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "gpio",
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_mali_list[] = {
+	&clk_mout_epll.clk,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_mali = {
+	.sources	= clkset_mali_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mali_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clk *clkset_dispcon_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&clk_mout_dpll.clk,
+};
+
+static struct clksrc_sources clkset_dispcon = {
+	.sources	= clkset_dispcon_list,
+	.nr_sources	= ARRAY_SIZE(clkset_dispcon_list),
+};
+
+static struct clk *clkset_hsmmc44_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&s5p_clk_27m,
+	&clk_48m,
+};
+
+static struct clksrc_sources clkset_hsmmc44 = {
+	.sources	= clkset_hsmmc44_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hsmmc44_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_dout_epll.clk,
+	[1] = &clk_dout_mpll.clk,
+	[2] = &clk_ext_xtal_mux,
+	[3] = NULL,
+	[4] = NULL,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "audio-bus",
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 8),
+		.parent		= &clk_dout_epll.clk,
+	},
+	.sources	= &clkset_sclk_audio0,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_fimc",
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "aclk_mali",
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_2d",
+			.ctrlbit	= (1 << 12),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_usi",
+			.ctrlbit	= (1 << 7),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_camif",
+			.ctrlbit	= (1 << 6),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_dispcon,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_hsmmc44",
+			.ctrlbit	= (1 << 30),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_hsmmc44,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
+	},
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.0",
+		.ctrlbit	= (1 << 24),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group2,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.1",
+		.ctrlbit	= (1 << 25),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group2,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+	.clk	= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.2",
+		.ctrlbit	= (1 << 26),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group2,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+	.clk	= {
+		.name		= "uclk1",
+		.ctrlbit	= (1 << 5),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_uart,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.0",
+		.ctrlbit	= (1 << 20),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group2,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk	= {
+		.name		= "sclk_spi",
+		.devname	= "s3c64xx-spi.1",
+		.ctrlbit	= (1 << 21),
+		.enable		= s5p64x0_sclk_ctrl,
+	},
+	.sources = &clkset_group2,
+	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uclk,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+	&clk_sclk_mmc0,
+	&clk_sclk_mmc1,
+	&clk_sclk_mmc2,
+};
+
+static struct clk_lookup s5p6450_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_dout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_mout_hclk_sel,
+	&clk_dout_pwm_ratio0,
+	&clk_pclk_to_wdt_pwm,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+	&clk_sclk_audio0,
+};
+
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.id		= -1,
+};
+
+void __init_or_cpufreq s5p6450_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long dpll;
+	unsigned int ptr;
+
+	/* Set S5P6450 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5p6450_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+	dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
+				__raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_dpll.rate = dpll;
+
+	printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz, D=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll),
+			print_mhz(dpll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+void __init s5p6450_register_clocks(void)
+{
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
+
+	s3c24xx_register_clock(&dummy_apb_pclk);
+
+	s3c_pwmclk_init();
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c
new file mode 100644
index 00000000..57e71895
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c
@@ -0,0 +1,236 @@
+/* linux/arch/arm/mach-s5p64x0/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+	.clk	= {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+};
+
+static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
+					       unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+	}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+static struct clk_ops s5p64x0_clkarm_ops = {
+	.get_rate	= s5p64x0_armclk_get_rate,
+	.set_rate	= s5p64x0_armclk_set_rate,
+	.round_rate	= s5p64x0_armclk_round_rate,
+};
+
+struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= 1,
+		.parent		= &clk_mout_apll.clk,
+		.ops		= &s5p64x0_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name		= "dout_mpll",
+		.id		= -1,
+		.parent		= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_hclk_low_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+struct clksrc_sources clkset_hclk_low = {
+	.sources	= clkset_hclk_low_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_low_list),
+};
+
+int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
+}
+
+int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
+}
+
+int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
+}
+
+int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
+}
+
+int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
+}
+
+int s5p64x0_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
+}
+
+int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P64X0_OTHERS);
+	if (enable)
+		val |= S5P64X0_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P64X0_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c
new file mode 100644
index 00000000..6e6a0a9d
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Codes for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6450[] = "S5P6450";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= S5P6440_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
+		.map_io		= s5p6440_map_io,
+		.init_clocks	= s5p6440_init_clocks,
+		.init_uarts	= s5p6440_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6440,
+	}, {
+		.idcode		= S5P6450_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
+		.map_io		= s5p6450_map_io,
+		.init_clocks	= s5p6450_init_clocks,
+		.init_uarts	= s5p6450_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6450,
+	},
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_WDT),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5p64x0_idle(void)
+{
+	unsigned long val;
+
+	val = __raw_readl(S5P64X0_PWR_CFG);
+	val &= ~(0x3 << 5);
+	val |= (0x1 << 5);
+	__raw_writel(val, S5P64X0_PWR_CFG);
+
+	cpu_do_idle();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P64X0_SYS_ID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
+
+	s5p64x0_default_sdhci0();
+	s5p64x0_default_sdhci1();
+	s5p6440_default_sdhci2();
+
+	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+	init_consistent_dma_size(SZ_8M);
+}
+
+void __init s5p6450_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+	s3c_fb_setname("s5p64x0-fb");
+
+	s5p64x0_default_sdhci0();
+	s5p64x0_default_sdhci1();
+	s5p6450_default_sdhci2();
+
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+	init_consistent_dma_size(SZ_8M);
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6450_register_clocks();
+	s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+	/* S5P6450 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+	 * VIC1 is missing IRQ VIC1[12, 14, 23]
+	 */
+	vic[0] = 0xff9f1fff;
+	vic[1] = 0xff7fafff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct bus_type s5p64x0_subsys = {
+	.name		= "s5p64x0-core",
+	.dev_name	= "s5p64x0-core",
+};
+
+static struct device s5p64x0_dev = {
+	.bus	= &s5p64x0_subsys,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+	return subsys_system_register(&s5p64x0_subsys, NULL);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+	/* set idle function */
+	arm_pm_idle = s5p64x0_idle;
+
+	return device_register(&s5p64x0_dev);
+}
+
+/* uart registration process */
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	int uart;
+
+	for (uart = 0; uart < no; uart++) {
+		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+	}
+
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+#define eint_offset(irq)	((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = eint_offset(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	if (offs > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S3C2410_EXTINT_RISEEDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S3C2410_EXTINT_FALLEDGE;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S3C2410_EXTINT_BOTHEDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S3C2410_EXTINT_LOWLEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S3C2410_EXTINT_HILEV;
+		break;
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs / 2) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+	else
+		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+	return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5P64X0_EINT0PEND);
+	u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+	unsigned int irq;
+
+	status &= ~mask;
+	status >>= start;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+		status >>= 1;
+	}
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+					struct irq_desc *desc)
+{
+	s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+				    S5P_VA_GPIO, handle_level_irq);
+	if (!gc) {
+		printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+			"external interrupts failed\n", __func__);
+		return -EINVAL;
+	}
+
+	ct = gc->chip_types;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+	ct->chip.irq_set_wake = s3c_irqext_wake;
+	ct->regs.ack = EINT0PEND_OFFSET;
+	ct->regs.mask = EINT0MASK_OFFSET;
+	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+	return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+	int ret = s5p64x0_alloc_gc();
+	irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+	irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+	irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+	return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
+
+void s5p64x0_restart(char mode, const char *cmd)
+{
+	if (mode != 's')
+		arch_wdt_reset();
+
+	soft_restart(0);
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h
new file mode 100644
index 00000000..f8a60fdc
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
+#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
+
+void s5p6440_init_irq(void);
+void s5p6450_init_irq(void);
+void s5p64x0_init_io(struct map_desc *mach_desc, int size);
+
+void s5p6440_register_clocks(void);
+void s5p6440_setup_clocks(void);
+
+void s5p6450_register_clocks(void);
+void s5p6450_setup_clocks(void);
+
+void s5p64x0_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern  int s5p64x0_init(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c
new file mode 100644
index 00000000..35f1f226
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c
@@ -0,0 +1,236 @@
+/* linux/arch/arm/mach-s5p64x0/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "sclk_audio2",
+};
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
+		break;
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+static struct resource s5p64x0_i2s0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_I2S,
+		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		= "samsung-i2s",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
+	.resource	= s5p64x0_i2s0_resource,
+	.dev = {
+		.platform_data = &s5p6440_i2s_pdata,
+	},
+};
+
+static int s5p6450_cfg_i2s(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
+		break;
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+struct platform_device s5p6450_device_iis0 = {
+	.name		= "samsung-i2s",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
+	.resource	= s5p64x0_i2s0_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s0_pdata,
+	},
+};
+
+static struct s3c_audio_pdata s5p6450_i2s_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+static struct resource s5p6450_i2s1_resource[] = {
+	[0] = {
+		.start	= S5P6450_PA_I2S1,
+		.end	= S5P6450_PA_I2S1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S1_TX,
+		.end	= DMACH_I2S1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S1_RX,
+		.end	= DMACH_I2S1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6450_device_iis1 = {
+	.name		= "samsung-i2s",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6450_i2s1_resource),
+	.resource	= s5p6450_i2s1_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s_pdata,
+	},
+};
+
+static struct resource s5p6450_i2s2_resource[] = {
+	[0] = {
+		.start	= S5P6450_PA_I2S2,
+		.end	= S5P6450_PA_I2S2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S2_TX,
+		.end	= DMACH_I2S2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S2_RX,
+		.end	= DMACH_I2S2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6450_device_iis2 = {
+	.name		= "samsung-i2s",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5p6450_i2s2_resource),
+	.resource	= s5p6450_i2s2_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_PCM,
+		.end	= S5P64X0_PA_PCM + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		= "samsung-pcm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	= s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s5p6440_pcm_pdata,
+	},
+};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c
new file mode 100644
index 00000000..2ee5dc06
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/dma.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static u8 s5p6440_pdma_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_MAX,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+};
+
+static struct dma_pl330_platdata s5p6440_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+	.peri_id = s5p6440_pdma_peri,
+};
+
+static u8 s5p6450_pdma_peri[] = {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI1_RX,
+	DMACH_USI_TX,
+	DMACH_USI_RX,
+	DMACH_MAX,
+	DMACH_I2S1_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S2_TX,
+	DMACH_I2S2_RX,
+	DMACH_PWM,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+};
+
+static struct dma_pl330_platdata s5p6450_pdma_pdata = {
+	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+	.peri_id = s5p6450_pdma_peri,
+};
+
+static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
+	S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
+
+static int __init s5p64x0_dma_init(void)
+{
+	if (soc_is_s5p6450()) {
+		dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
+		dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
+		s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
+	} else {
+		dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
+		dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
+		s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
+	}
+
+	amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
+
+	return 0;
+}
+arch_initcall(s5p64x0_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c
new file mode 100644
index 00000000..700dac6c
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c
@@ -0,0 +1,508 @@
+/* linux/arch/arm/mach-s5p64x0/gpiolib.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ *
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	8	4Bit	Yes	None
+ * F	2	2Bit	Yes	None
+ * G	14	4Bit[2]	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	5	4Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	11	2Bit	Yes	8
+ * Q	14	2Bit	Yes	None
+ * R	15	4Bit[2]	Yes	None
+ * S	8	2Bit	Yes	None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+					     unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+					      unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0,
+	}, {
+		.cfg_eint	= 7,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
+	}, {
+		.cfg_eint	= 0,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 2,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+	{
+		.base	= S5P64X0_GPA_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P64X0_GPB_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P64X0_GPC_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P64X0_GPG_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+	{
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
+	{
+		.base	= S5P64X0_GPA_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPA(0),
+			.ngpio	= S5P6450_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P64X0_GPB_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPB(0),
+			.ngpio	= S5P6450_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P64X0_GPC_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPC(0),
+			.ngpio	= S5P6450_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6450_GPD_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPD(0),
+			.ngpio	= S5P6450_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5P6450_GPK_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPK(0),
+			.ngpio	= S5P6450_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
+	{
+		.base	= S5P64X0_GPG_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPG(0),
+			.ngpio	= S5P6450_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6450_GPH(0),
+			.ngpio	= S5P6450_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6450_GPR(0),
+			.ngpio	= S5P6450_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPF(0),
+			.ngpio	= S5P6450_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6450_GPI(0),
+			.ngpio	= S5P6450_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6450_GPJ(0),
+			.ngpio	= S5P6450_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPN(0),
+			.ngpio	= S5P6450_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPP(0),
+			.ngpio	= S5P6450_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S5P6450_GPQ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPQ(0),
+			.ngpio	= S5P6450_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S5P6450_GPS_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPS(0),
+			.ngpio	= S5P6450_GPIO_S_NR,
+			.label	= "GPS",
+		},
+	},
+};
+
+void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull	= s3c_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull	= s3c_gpio_getpull_updown;
+	}
+}
+
+static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+						int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_output =
+					s5p64x0_gpiolib_rbank_4bit2_output;
+		s3c_gpiolib_add(chip);
+	}
+}
+
+static int __init s5p64x0_gpiolib_init(void)
+{
+	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
+				ARRAY_SIZE(s5p64x0_gpio_cfgs));
+
+	if (soc_is_s5p6450()) {
+		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
+					ARRAY_SIZE(s5p6450_gpio_2bit));
+
+		samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
+					ARRAY_SIZE(s5p6450_gpio_4bit));
+
+		samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
+					ARRAY_SIZE(s5p6450_gpio_4bit2));
+
+		s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
+					ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
+	} else {
+		samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
+					ARRAY_SIZE(s5p6440_gpio_2bit));
+
+		samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+					ARRAY_SIZE(s5p6440_gpio_4bit));
+
+		samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+					ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+		s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
+					ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
+	}
+
+	return 0;
+}
+core_initcall(s5p64x0_gpiolib_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
new file mode 100644
index 00000000..e80ba3c6
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#include <plat/regs-serial.h>
+
+	.macro addruart, rp, rv, tmp
+		mov	\rp, #0xE0000000
+		orr	\rp, \rp, #0x00100000
+		ldr	\rp, [\rp, #0x118 ]
+		and	\rp, \rp, #0xff000
+		teq	\rp, #0x50000		@@ S5P6450
+		ldreq	\rp, =0xEC800000
+		movne	\rp, #0xEC000000	@@ S5P6440
+		ldrne	\rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h
new file mode 100644
index 00000000..5a622af4
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h
new file mode 100644
index 00000000..06cd3c9b
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -0,0 +1,132 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+/* GPIO bank sizes */
+
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(16)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+#define S5P6450_GPIO_A_NR	(6)
+#define S5P6450_GPIO_B_NR	(7)
+#define S5P6450_GPIO_C_NR	(8)
+#define S5P6450_GPIO_D_NR	(8)
+#define S5P6450_GPIO_F_NR	(16)
+#define S5P6450_GPIO_G_NR	(14)
+#define S5P6450_GPIO_H_NR	(10)
+#define S5P6450_GPIO_I_NR	(16)
+#define S5P6450_GPIO_J_NR	(12)
+#define S5P6450_GPIO_K_NR	(5)
+#define S5P6450_GPIO_N_NR	(16)
+#define S5P6450_GPIO_P_NR	(11)
+#define S5P6450_GPIO_Q_NR	(14)
+#define S5P6450_GPIO_R_NR	(15)
+#define S5P6450_GPIO_S_NR	(8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P64X0_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p6440_gpio_number {
+	S5P6440_GPIO_A_START	= 0,
+	S5P6440_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+enum s5p6450_gpio_number {
+	S5P6450_GPIO_A_START	= 0,
+	S5P6450_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
+	S5P6450_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
+	S5P6450_GPIO_D_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
+	S5P6450_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
+	S5P6450_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
+	S5P6450_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
+	S5P6450_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
+	S5P6450_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
+	S5P6450_GPIO_K_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
+	S5P6450_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
+	S5P6450_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
+	S5P6450_GPIO_Q_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
+	S5P6450_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
+	S5P6450_GPIO_S_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
+};
+
+/* GPIO number definitions */
+
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+#define S5P6450_GPA(_nr)	(S5P6450_GPIO_A_START + (_nr))
+#define S5P6450_GPB(_nr)	(S5P6450_GPIO_B_START + (_nr))
+#define S5P6450_GPC(_nr)	(S5P6450_GPIO_C_START + (_nr))
+#define S5P6450_GPD(_nr)	(S5P6450_GPIO_D_START + (_nr))
+#define S5P6450_GPF(_nr)	(S5P6450_GPIO_F_START + (_nr))
+#define S5P6450_GPG(_nr)	(S5P6450_GPIO_G_START + (_nr))
+#define S5P6450_GPH(_nr)	(S5P6450_GPIO_H_START + (_nr))
+#define S5P6450_GPI(_nr)	(S5P6450_GPIO_I_START + (_nr))
+#define S5P6450_GPJ(_nr)	(S5P6450_GPIO_J_START + (_nr))
+#define S5P6450_GPK(_nr)	(S5P6450_GPIO_K_START + (_nr))
+#define S5P6450_GPN(_nr)	(S5P6450_GPIO_N_START + (_nr))
+#define S5P6450_GPP(_nr)	(S5P6450_GPIO_P_START + (_nr))
+#define S5P6450_GPQ(_nr)	(S5P6450_GPIO_Q_START + (_nr))
+#define S5P6450_GPR(_nr)	(S5P6450_GPIO_R_START + (_nr))
+#define S5P6450_GPS(_nr)	(S5P6450_GPIO_S_START + (_nr))
+
+/* the end of the S5P64X0 specific gpios */
+
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S5P6450_GPIO_END	(S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
+
+#define S5P64X0_GPIO_END	(S5P6440_GPIO_END > S5P6450_GPIO_END ?	\
+				 S5P6440_GPIO_END : S5P6450_GPIO_END)
+
+#define S3C_GPIO_END		S5P64X0_GPIO_END
+
+/* define the number of gpios we need to the one after the last GPIO range */
+
+#define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h
new file mode 100644
index 00000000..d3e87996
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h
new file mode 100644
index 00000000..887d2520
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 I2C configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
+
+extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h
new file mode 100644
index 00000000..5b845e84
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -0,0 +1,150 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
+ *
+ * Copyright 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIS1		S5P_IRQ_VIC0(3)	/* for only S5P6450 */
+#define IRQ_IIS2		S5P_IRQ_VIC0(4)	/* for only S5P6450 */
+#define IRQ_IIC1		S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)	/* for only S5P6450 */
+
+#define IRQ_2D			S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_WDT			S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
+#define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_PCM1		S5P_IRQ_VIC1(3)	/* for only S5P6450 */
+#define IRQ_PCM2		S5P_IRQ_VIC1(4)	/* for only S5P6450 */
+#define IRQ_UART0		S5P_IRQ_VIC1(5)
+#define IRQ_UART1		S5P_IRQ_VIC1(6)
+#define IRQ_UART2		S5P_IRQ_VIC1(7)
+#define IRQ_UART3		S5P_IRQ_VIC1(8)
+#define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_UART4		S5P_IRQ_VIC1(10)	/* S5P6450 */
+#define IRQ_UART5		S5P_IRQ_VIC1(11)	/* S5P6450 */
+#define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_USI			S5P_IRQ_VIC1(15)	/* S5P6450 */
+#define IRQ_SPI0		S5P_IRQ_VIC1(16)
+#define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(17)	/* Shared */
+#define IRQ_IIC			S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
+#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
+#define IRQ_PMU			S5P_IRQ_VIC1(23)	/* S5P6440 */
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
+#define IRQ_OTG			S5P_IRQ_VIC1(26)
+#define IRQ_DSI			S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
+#define IRQ_TSI			S5P_IRQ_VIC1(29)
+#define IRQ_PENDN		S5P_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S5P_IRQ_VIC1(31)
+
+/* UART interrupts, S5P6450 has 5 UARTs */
+#define IRQ_S5P_UART_BASE4	(96)
+#define IRQ_S5P_UART_BASE5	(100)
+
+#define IRQ_S5P_UART_RX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR4	(IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR5	(IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX4		IRQ_S5P_UART_RX4
+#define IRQ_S3CUART_RX5		IRQ_S5P_UART_RX5
+
+#define IRQ_I2S0		IRQ_I2SV40
+
+#define IRQ_LCD_FIFO		IRQ_DISPCON0
+#define IRQ_LCD_VSYNC		IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
+
+/* S5P6450 EINT feature will be added */
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2		(0xf0000000)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR	(11)
+
+#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
+
+#define IRQ_TIMER_BASE		(11)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h
new file mode 100644
index 00000000..0c0175db
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -0,0 +1,95 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P64X0_PA_SDRAM	0x20000000
+
+#define S5P64X0_PA_CHIPID	0xE0000000
+
+#define S5P64X0_PA_SYSCON	0xE0100000
+
+#define S5P64X0_PA_GPIO		0xE0308000
+
+#define S5P64X0_PA_VIC0		0xE4000000
+#define S5P64X0_PA_VIC1		0xE4100000
+
+#define S5P64X0_PA_SROMC	0xE7000000
+
+#define S5P64X0_PA_PDMA		0xE9000000
+
+#define S5P64X0_PA_TIMER	0xEA000000
+#define S5P64X0_PA_RTC		0xEA100000
+#define S5P64X0_PA_WDT		0xEA200000
+
+#define S5P6440_PA_IIC0		0xEC104000
+#define S5P6440_PA_IIC1		0xEC20F000
+#define S5P6450_PA_IIC0		0xEC100000
+#define S5P6450_PA_IIC1		0xEC200000
+
+#define S5P64X0_PA_SPI0		0xEC400000
+#define S5P64X0_PA_SPI1		0xEC500000
+
+#define S5P64X0_PA_HSOTG	0xED100000
+
+#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_FB		0xEE000000
+
+#define S5P64X0_PA_I2S		0xF2000000
+#define S5P6450_PA_I2S1		0xF2800000
+#define S5P6450_PA_I2S2		0xF2900000
+
+#define S5P64X0_PA_PCM		0xF2100000
+
+#define S5P64X0_PA_ADC		0xF3000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
+#define S3C_PA_RTC		S5P64X0_PA_RTC
+#define S3C_PA_WDT		S5P64X0_PA_WDT
+#define S3C_PA_FB		S5P64X0_PA_FB
+#define S3C_PA_SPI0		S5P64X0_PA_SPI0
+#define S3C_PA_SPI1		S5P64X0_PA_SPI1
+
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+#define S5P_PA_SROMC		S5P64X0_PA_SROMC
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
+#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+
+/* UART */
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h
new file mode 100644
index 00000000..e52f7545
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+	/*
+	 * As a note, since the S5P64X0 UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+	tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+	__raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow	((1 << 16) - 1)
+#define s3c_irqwake_intallow	(~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/*
+	 * S5P64X0 UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settings.
+	 */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/*
+	 * We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/*
+		 * change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0
+		 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		!(save_clk & S3C6400_UCON_UCLK0) &&
+		delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/*
+			 * as a precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa
+			 */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* ensure sleep mode has been cleared from the system */
+	__raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+	/*
+	 * turn on the sleep mode and keep it there, as it seems that during
+	 * suspend the xCON registers get re-set and thus you can end up with
+	 * problems between going to sleep and resuming.
+	 */
+	__raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
new file mode 100644
index 00000000..bd91112c
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+
+#define S5P64X0_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P64X0_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P64X0_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P64X0_EPLL_CON_K		S5P_CLKREG(0x18)
+
+#define S5P64X0_CLK_SRC0		S5P_CLKREG(0x1C)
+
+#define S5P64X0_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P64X0_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P64X0_CLK_DIV2		S5P_CLKREG(0x28)
+
+#define S5P64X0_CLK_GATE_HCLK0		S5P_CLKREG(0x30)
+#define S5P64X0_CLK_GATE_PCLK		S5P_CLKREG(0x34)
+#define S5P64X0_CLK_GATE_SCLK0		S5P_CLKREG(0x38)
+#define S5P64X0_CLK_GATE_MEM0		S5P_CLKREG(0x3C)
+
+#define S5P64X0_CLK_DIV3		S5P_CLKREG(0x40)
+
+#define S5P64X0_CLK_GATE_HCLK1		S5P_CLKREG(0x44)
+#define S5P64X0_CLK_GATE_SCLK1		S5P_CLKREG(0x48)
+
+#define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
+#define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
+
+#define S5P64X0_AHB_CON0		S5P_CLKREG(0x100)
+#define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
+
+#define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
+#define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
+
+#define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG		S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE		S5P_CLKREG(0x828)
+
+#define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT		S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0			S5P_CLKREG(0xA00)
+
+#define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
+#define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG	(1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG	(1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3	(1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2	(1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1	(1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0	(1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE		(1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE		(1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE	(1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE	(1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK		(3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP		(3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN	(1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4	(4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT	(1 << 31)
+#define S5P64X0_OTHERS_RET_UART		(1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1		(1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0		(1 << 24)
+#define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
+
+/* Compatibility defines */
+
+#define ARM_CLK_DIV			S5P64X0_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
+
+#define S5P_EPLL_CON			S5P64X0_EPLL_CON
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
new file mode 100644
index 00000000..cfdfa4fd
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+
+#define S5P64X0_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P64X0_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P64X0_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P64X0_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P64X0_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P64X0_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P64X0_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P64X0_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P64X0_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P64X0_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P64X0_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+
+#define S5P6450_GPD_BASE		(S5P_VA_GPIO + 0x0060)
+#define S5P6450_GPK_BASE		(S5P_VA_GPIO + 0x0140)
+#define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
+#define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
+
+#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
+#define S5P64X0_SPCON1			(S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0		(S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1		(S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON		(S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON		(S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON		(S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON		(S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK		(S5P_VA_GPIO + 0x240)
+
+/* External interrupt control registers for group0 */
+
+#define EINT0CON0_OFFSET		(0x900)
+#define EINT0FLTCON0_OFFSET		(0x910)
+#define EINT0FLTCON1_OFFSET		(0x914)
+#define EINT0MASK_OFFSET		(0x920)
+#define EINT0PEND_OFFSET		(0x924)
+
+#define S5P64X0_EINT0CON0		(S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0		(S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1		(S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
+#define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
+#define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
+
+#define S5P64X0_SLPEN			(S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP		(1 << 0)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
new file mode 100644
index 00000000..4aaebdac
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
new file mode 100644
index 00000000..0ef47d1b
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -0,0 +1,39 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p64x0 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk clk_mout_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_mout_epll;
+
+extern int s5p64x0_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
+
+extern struct clksrc_clk clk_armclk;
+extern struct clksrc_clk clk_dout_mpll;
+
+extern struct clksrc_sources clkset_hclk_low;
+
+extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
+
+extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
new file mode 100644
index 00000000..170a20a9
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+#define S5P64X0_SPI_SRCCLK_PCLK		0
+#define S5P64X0_SPI_SRCCLK_SCLK		1
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h
new file mode 100644
index 00000000..00aa7f1d
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h
new file mode 100644
index 00000000..4b91faa1
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 00000000..1608faf8
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+unsigned int fifo_mask;
+unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+	unsigned int chipid;
+
+	chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+	if ((chipid & 0xff000) == 0x50000)
+		uart_base += 0xEC800000;
+	else
+		uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+	/*
+	 * we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+
+	/*
+	 * Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c
new file mode 100644
index 00000000..3e6f2456
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S5P64X0_EINT0CON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+	SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+	SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+	u32	con;
+	u32	fltcon;
+	u32	mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+		grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+		grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+	struct irq_grp_save *grp = eint_grp_save;
+	int i;
+
+	S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+		__raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+		__raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+	}
+
+	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+	.suspend = s5p64x0_irq_pm_suspend,
+	.resume  = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+	return 0;
+}
+core_initcall(s5p64x0_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c
new file mode 100644
index 00000000..a40e325d
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -0,0 +1,277 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+#include <linux/mmc/host.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+#include <plat/s5p-time.h>
+#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
+
+#include "common.h"
+
+#define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6440_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+	.win[0]		= &smdk6440_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6440_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6440_GPN(5), 1);
+		gpio_set_value(S5P6440_GPN(5), 0);
+		gpio_set_value(S5P6440_GPN(5), 1);
+		gpio_free(S5P6440_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+	.set_power	= smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6440_lcd_power_data,
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&samsung_asoc_dma,
+	&s5p6440_device_iis,
+	&s3c_device_fb,
+	&smdk6440_lcd_lte480wv,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_INTERNAL,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+	.max_width	= 8,
+	.host_caps	= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+};
+
+static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
+	/* To be populated */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
+	.no = S5P6440_GPF(15),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk6440_bl_data = {
+	.pwm_id = 1,
+};
+
+static void __init smdk6440_map_io(void)
+{
+	s5p64x0_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+}
+
+static void s5p6440_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+static void __init smdk6440_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(NULL);
+
+	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
+	i2c_register_board_info(0, smdk6440_i2c_devs0,
+			ARRAY_SIZE(smdk6440_i2c_devs0));
+	i2c_register_board_info(1, smdk6440_i2c_devs1,
+			ARRAY_SIZE(smdk6440_i2c_devs1));
+
+	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
+
+	s5p6440_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
+	s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
+
+	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+
+	.init_irq	= s5p6440_init_irq,
+	.handle_irq	= vic_handle_irq,
+	.map_io		= smdk6440_map_io,
+	.init_machine	= smdk6440_machine_init,
+	.timer		= &s5p_timer,
+	.restart	= s5p64x0_restart,
+MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c
new file mode 100644
index 00000000..efb69e2f
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -0,0 +1,296 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+#include <linux/mmc/host.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+#include <plat/s5p-time.h>
+#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
+
+#include "common.h"
+
+#define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6450_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6450_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[4] = {
+		.hwport		= 4,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[5] = {
+		.hwport		= 5,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+	.win_mode	= {
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+	.win[0]		= &smdk6450_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+					 unsigned int power)
+{
+	int err;
+
+	if (power) {
+		err = gpio_request(S5P6450_GPN(5), "GPN");
+		if (err) {
+			printk(KERN_ERR "failed to request GPN for lcd reset\n");
+			return;
+		}
+
+		gpio_direction_output(S5P6450_GPN(5), 1);
+		gpio_set_value(S5P6450_GPN(5), 0);
+		gpio_set_value(S5P6450_GPN(5), 1);
+		gpio_free(S5P6450_GPN(5));
+	}
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+	.set_power	= smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdk6450_lcd_power_data,
+};
+
+static struct platform_device *smdk6450_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&samsung_asoc_dma,
+	&s5p6450_device_iis0,
+	&s3c_device_fb,
+	&smdk6450_lcd_lte480wv,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	/* s5p6450_device_spi0 will be added */
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_NONE,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+	.max_width	= 8,
+	.host_caps	= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
+	.cd_type	= S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
+	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
+};
+
+static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
+	.no = S5P6450_GPF(15),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk6450_bl_data = {
+	.pwm_id = 1,
+};
+
+static void __init smdk6450_map_io(void)
+{
+	s5p64x0_init_io(NULL, 0);
+	s3c24xx_init_clocks(19200000);
+	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+}
+
+static void s5p6450_set_lcd_interface(void)
+{
+	unsigned int cfg;
+
+	/* select TFT LCD type (RGB I/F) */
+	cfg = __raw_readl(S5P64X0_SPCON0);
+	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+	__raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+static void __init smdk6450_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(NULL);
+
+	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
+	i2c_register_board_info(0, smdk6450_i2c_devs0,
+			ARRAY_SIZE(smdk6450_i2c_devs0));
+	i2c_register_board_info(1, smdk6450_i2c_devs1,
+			ARRAY_SIZE(smdk6450_i2c_devs1));
+
+	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
+
+	s5p6450_set_lcd_interface();
+	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
+	s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
+
+	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+}
+
+MACHINE_START(SMDK6450, "SMDK6450")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+
+	.init_irq	= s5p6450_init_irq,
+	.handle_irq	= vic_handle_irq,
+	.map_io		= smdk6450_map_io,
+	.init_machine	= smdk6450_machine_init,
+	.timer		= &s5p_timer,
+	.restart	= s5p64x0_restart,
+MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c
new file mode 100644
index 00000000..9cba18bf
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c
@@ -0,0 +1,206 @@
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+	SAVE_ITEM(S5P64X0_APLL_CON),
+	SAVE_ITEM(S5P64X0_MPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON),
+	SAVE_ITEM(S5P64X0_EPLL_CON_K),
+	SAVE_ITEM(S5P64X0_CLK_SRC0),
+	SAVE_ITEM(S5P64X0_CLK_SRC1),
+	SAVE_ITEM(S5P64X0_CLK_DIV0),
+	SAVE_ITEM(S5P64X0_CLK_DIV1),
+	SAVE_ITEM(S5P64X0_CLK_DIV2),
+	SAVE_ITEM(S5P64X0_CLK_DIV3),
+	SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+	SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+	SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+	SAVE_ITEM(S5P64X0_AHB_CON0),
+	SAVE_ITEM(S5P64X0_SPCON0),
+	SAVE_ITEM(S5P64X0_SPCON1),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+	SAVE_ITEM(S5P64X0_MEM0DRVCON),
+	SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+	SAVE_ITEM(S5P6450_DPLL_CON),
+	SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+	__raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+	__raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+	s3c_pm_do_restore_core(s5p64x0_core_save,
+				ARRAY_SIZE(s5p64x0_core_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_restore_core(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+	s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+	if (soc_is_s5p6450())
+		s3c_pm_do_save(s5p6450_core_save,
+				ARRAY_SIZE(s5p6450_core_save));
+
+	s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp = 0;
+
+	/*
+	 * Issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case.
+	 */
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+	/* we should never get past here */
+	panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+	u32 tmp;
+
+	samsung_sync_wakemask(S5P64X0_PWR_CFG,
+			s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+	/* store the resume address in INFORM0 register */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+	/* setup clock gating for FIMGVG block */
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+		(S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+		(S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+	/* Configure the stabilization counter with wait time required */
+	__raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+	/* set WFI to SLEEP mode configuration */
+	tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+	tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+	__raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+	tmp = __raw_readl(S5P64X0_PWR_CFG);
+	tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+	tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S5P64X0_PWR_CFG);
+
+	/*
+	 * set OTHERS register to disable interrupt before going to
+	 * sleep. This bit is present only in S5P6450, it is reserved
+	 * in S5P6440.
+	 */
+	if (soc_is_s5p6450()) {
+		tmp = __raw_readl(S5P64X0_OTHERS);
+		tmp |= S5P6450_OTHERS_DISABLE_INT;
+		__raw_writel(tmp, S5P64X0_OTHERS);
+	}
+
+	/* ensure previous wakeup state is cleared before sleeping */
+	__raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s5p64x0_pm_prepare;
+	pm_cpu_sleep = s5p64x0_cpu_suspend;
+	pm_uart_udivslot = 1;
+
+	return 0;
+}
+
+static struct subsys_interface s5p64x0_pm_interface = {
+	.name		= "s5p64x0_pm",
+	.subsys		= &s5p64x0_subsys,
+	.add_dev	= s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+	s3c_pm_init();
+
+	return subsys_interface_register(&s5p64x0_pm_interface);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(S5P64X0_OTHERS);
+	tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+			S5P64X0_OTHERS_RET_UART);
+	__raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+	.resume		= s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+	register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+	return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 00000000..f346ee4a
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+	if (soc_is_s5p6440()) {
+		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+	} else if (soc_is_s5p6450()) {
+		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+	}
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c
new file mode 100644
index 00000000..46b46391
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64x0/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c
new file mode 100644
index 00000000..6ad3b986
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
new file mode 100644
index 00000000..8410af0d
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+#include <plat/cpu.h>
+
+void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+	/* Set all the necessary GPG pins to special-function 2 */
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
+					 S3C_GPIO_SFN(2));
+	else
+		s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
+					 S3C_GPIO_SFN(2));
+
+	/* Set GPG[6] pin to special-function 2 - MMC0 CDn */
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		if (soc_is_s5p6450()) {
+			s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+			s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
+		} else {
+			s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+			s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
+		}
+	}
+}
+
+void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+	/* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
+	else
+		s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
+
+	switch (width) {
+	case 8:
+		/* Set data pins GPH[6:9] special-function 2 */
+		if (soc_is_s5p6450())
+			s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
+						 S3C_GPIO_SFN(2));
+		else
+			s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
+						 S3C_GPIO_SFN(2));
+	case 4:
+		/* set data pins GPH[2:5] special-function 2 */
+		if (soc_is_s5p6450())
+			s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
+						 S3C_GPIO_SFN(2));
+		else
+			s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
+						 S3C_GPIO_SFN(2));
+	default:
+		break;
+	}
+
+	/* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		if (soc_is_s5p6450()) {
+			s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+			s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
+		} else {
+			s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+			s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
+		}
+	}
+}
+
+void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	/* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
+	s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
+
+	/* Set data pins GPH[6:9] pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
+}
+
+void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	/* Set all the necessary GPG pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
+}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c
new file mode 100644
index 00000000..e9b84124
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/mach-s5p64x0/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
+					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	else
+		s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
+					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	if (soc_is_s5p6450())
+		s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
+					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	else
+		s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
+					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif