Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 239 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c
deleted file mode 100644
index c87fde4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MV2120_NOR_BOOT_BASE	0xf4000000
-#define MV2120_NOR_BOOT_SIZE	SZ_512K
-
-#define MV2120_GPIO_RTC_IRQ	3
-#define MV2120_GPIO_KEY_RESET	17
-#define MV2120_GPIO_KEY_POWER	18
-#define MV2120_GPIO_POWER_OFF	19
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data mv2120_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data mv2120_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mtd_partition mv2120_partitions[] = {
-	{
-		.name	= "firmware",
-		.size	= 0x00080000,
-		.offset	= 0,
-	},
-};
-
-static struct physmap_flash_data mv2120_nor_flash_data = {
-	.width		= 1,
-	.parts		= mv2120_partitions,
-	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
-};
-
-static struct resource mv2120_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MV2120_NOR_BOOT_BASE,
-	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mv2120_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mv2120_nor_flash_data,
-	},
-	.resource	= &mv2120_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-static struct gpio_keys_button mv2120_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= MV2120_GPIO_KEY_RESET,
-		.desc		= "reset",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_POWER,
-		.gpio		= MV2120_GPIO_KEY_POWER,
-		.desc		= "power",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv2120_button_data = {
-	.buttons	= mv2120_buttons,
-	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
-};
-
-static struct platform_device mv2120_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv2120_button_data,
-	},
-};
-
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mv2120_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Sys status LED */
-	MPP1_GPIO,		/* Sys error LED */
-	MPP2_GPIO,		/* OverTemp interrupt */
-	MPP3_GPIO,		/* RTC interrupt */
-	MPP4_GPIO,		/* V_LED 5V */
-	MPP5_GPIO,		/* V_LED 3.3V */
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_GPIO,		/* SATA 0 fail LED */
-	MPP9_GPIO,		/* SATA 1 fail LED */
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_GPIO,		/* Reset button */
-	MPP18_GPIO,		/* Power button */
-	MPP19_GPIO,		/* Power off */
-	0,
-};
-
-static struct i2c_board_info __initdata mv2120_i2c_rtc = {
-	I2C_BOARD_INFO("pcf8563", 0x51),
-	.irq	= 0,
-};
-
-static struct gpio_led mv2120_led_pins[] = {
-	{
-		.name			= "mv2120:blue:health",
-		.gpio			= 0,
-	},
-	{
-		.name			= "mv2120:red:health",
-		.gpio			= 1,
-	},
-	{
-		.name			= "mv2120:led:bright",
-		.gpio			= 4,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "mv2120:led:dimmed",
-		.gpio			= 5,
-	},
-	{
-		.name			= "mv2120:red:sata0",
-		.gpio			= 8,
-		.active_low		= 1,
-	},
-	{
-		.name			= "mv2120:red:sata1",
-		.gpio			= 9,
-		.active_low		= 1,
-	},
-
-};
-
-static struct gpio_led_platform_data mv2120_led_data = {
-	.leds		= mv2120_led_pins,
-	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
-};
-
-static struct platform_device mv2120_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv2120_led_data,
-	}
-};
-
-static void mv2120_power_off(void)
-{
-	pr_info("%s: triggering power-off...\n", __func__);
-	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
-}
-
-static void __init mv2120_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	orion5x_mpp_conf(mv2120_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&mv2120_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&mv2120_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
-	platform_device_register(&mv2120_nor_flash);
-
-	platform_device_register(&mv2120_button_device);
-
-	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
-		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
-			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
-		else
-			gpio_free(MV2120_GPIO_RTC_IRQ);
-	}
-	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
-	platform_device_register(&mv2120_leds);
-
-	/* register mv2120 specific power-off method */
-	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
-		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
-}
-
-/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
-MACHINE_START(MV2120, "HP Media Vault mv2120")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv2120_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END