init android origin source code

1 files changed, 587 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c
new file mode 100644
index 00000000..1b782ba5
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c
@@ -0,0 +1,587 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
+#include <linux/platform_data/omap-abe-twl6040.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <video/omapdss.h>
+
+#include <plat/board.h>
+#include "common.h"
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include <video/omap-panel-dvi.h>
+
+#include "hsmmc.h"
+#include "control.h"
+#include "mux.h"
+#include "common-board-devices.h"
+
+#define GPIO_HUB_POWER		1
+#define GPIO_HUB_NRESET		62
+#define GPIO_WIFI_PMENA		43
+#define GPIO_WIFI_IRQ		53
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD  63 /* Hotplug detect */
+
+/* wl127x BT, FM, GPS connectivity chip */
+static int wl1271_gpios[] = {46, -1, -1};
+static struct platform_device wl1271_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wl1271_gpios,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "pandaboard::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 7,
+	},
+	{
+		.name			= "pandaboard::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= 8,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct omap_abe_twl6040_data panda_abe_audio_data = {
+	/* Audio out */
+	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* HandsFree through expasion connector */
+	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
+	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* PandaBoard: FM RX, PandaBoardES: audio in */
+	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
+	/* No jack detection. */
+	.jack_detection	= 0,
+	/* MCLK input is 38.4MHz */
+	.mclk_freq	= 38400000,
+
+};
+
+static struct platform_device panda_abe_audio = {
+	.name		= "omap-abe-twl6040",
+	.id		= -1,
+	.dev = {
+		.platform_data = &panda_abe_audio_data,
+	},
+};
+
+static struct platform_device btwilink_device = {
+	.name	= "btwilink",
+	.id	= -1,
+};
+
+static struct platform_device *panda_devices[] __initdata = {
+	&leds_gpio,
+	&wl1271_device,
+	&panda_abe_audio,
+	&btwilink_device,
+};
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.phy_reset  = false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static struct gpio panda_ehci_gpios[] __initdata = {
+	{ GPIO_HUB_POWER,	GPIOF_OUT_INIT_LOW,  "hub_power"  },
+	{ GPIO_HUB_NRESET,	GPIOF_OUT_INIT_LOW,  "hub_nreset" },
+};
+
+static void __init omap4_ehci_init(void)
+{
+	int ret;
+	struct clk *phy_ref_clk;
+
+	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
+	if (IS_ERR(phy_ref_clk)) {
+		pr_err("Cannot request auxclk3\n");
+		return;
+	}
+	clk_set_rate(phy_ref_clk, 19200000);
+	clk_enable(phy_ref_clk);
+
+	/* disable the power to the usb hub prior to init and reset phy+hub */
+	ret = gpio_request_array(panda_ehci_gpios,
+				 ARRAY_SIZE(panda_ehci_gpios));
+	if (ret) {
+		pr_err("Unable to initialize EHCI power/reset\n");
+		return;
+	}
+
+	gpio_export(GPIO_HUB_POWER, 0);
+	gpio_export(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 1);
+
+	usbhs_init(&usbhs_bdata);
+
+	/* enable power to hub */
+	gpio_set_value(GPIO_HUB_POWER, 1);
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+	},
+	{
+		.name		= "wl1271",
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.ocr_mask	= MMC_VDD_165_195,
+		.nonremovable	= true,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
+};
+
+static struct regulator_init_data panda_vmmc5 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
+	.consumer_supplies = omap4_panda_vmmc5_supply,
+};
+
+static struct fixed_voltage_config panda_vwlan = {
+	.supply_name = "vwl1271",
+	.microvolts = 1800000, /* 1.8V */
+	.gpio = GPIO_WIFI_PMENA,
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &panda_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &panda_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+	/* PANDA ref clock is 38.4 MHz */
+	.board_ref_clock = 2,
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int irq = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	if (!pdata) {
+		dev_err(dev, "%s: NULL platform data\n", __func__);
+		return -EINVAL;
+	}
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		irq = twl6030_mmc_card_detect_config();
+		if (irq < 0) {
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, irq);
+			return irq;
+		}
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return 0;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+		return;
+	}
+	pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
+
+	return 0;
+}
+
+static struct twl6040_codec_data twl6040_codec = {
+	/* single-step ramp for headset and handsfree */
+	.hs_left_step	= 0x0f,
+	.hs_right_step	= 0x0f,
+	.hf_left_step	= 0x1d,
+	.hf_right_step	= 0x1d,
+};
+
+static struct twl6040_platform_data twl6040_data = {
+	.codec		= &twl6040_codec,
+	.audpwron_gpio	= 127,
+	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+/* Panda board uses the common PMIC configuration */
+static struct twl4030_platform_data omap4_panda_twldata;
+
+/*
+ * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
+ * is connected as I2C slave device, and can be accessed at address 0x50
+ */
+static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
+static int __init omap4_panda_i2c_init(void)
+{
+	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
+			TWL_COMMON_REGULATOR_VDAC |
+			TWL_COMMON_REGULATOR_VAUX2 |
+			TWL_COMMON_REGULATOR_VAUX3 |
+			TWL_COMMON_REGULATOR_VMMC |
+			TWL_COMMON_REGULATOR_VPP |
+			TWL_COMMON_REGULATOR_VANA |
+			TWL_COMMON_REGULATOR_VCXIO |
+			TWL_COMMON_REGULATOR_VUSB |
+			TWL_COMMON_REGULATOR_CLK32KG);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
+					ARRAY_SIZE(panda_i2c_eeprom));
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 53 */
+	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	/* WLAN POWER ENABLE - GPIO 43 */
+	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC5 CMD */
+	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 CLK */
+	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 DAT[0-3] */
+	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* gpio 0 - TFP410 PD */
+	OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
+	/* dispc2_data23 */
+	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data22 */
+	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data21 */
+	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data20 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data19 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data18 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data15 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data14 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data13 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data12 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data11 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data10 */
+	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data9 */
+	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data16 */
+	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data17 */
+	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_hsync */
+	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_pclk */
+	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_vsync */
+	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_de */
+	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data8 */
+	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data7 */
+	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data6 */
+	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data5 */
+	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data4 */
+	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data3 */
+	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data2 */
+	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data1 */
+	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data0 */
+	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+#else
+#define board_mux	NULL
+#endif
+
+/* Display DVI */
+#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
+
+static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+/* Using generic display panel */
+static struct panel_dvi_platform_data omap4_dvi_panel = {
+	.platform_enable	= omap4_panda_enable_dvi,
+	.platform_disable	= omap4_panda_disable_dvi,
+	.i2c_bus_num = 3,
+};
+
+struct omap_dss_device omap4_panda_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "dvi",
+	.data			= &omap4_dvi_panel,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+int __init omap4_panda_dvi_init(void)
+{
+	int r;
+
+	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
+	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
+				GPIOF_OUT_INIT_LOW, "DVI PD");
+	if (r)
+		pr_err("Failed to get DVI powerdown GPIO\n");
+
+	return r;
+}
+
+static struct gpio panda_hdmi_gpios[] = {
+	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
+	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
+};
+
+static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
+{
+	int status;
+
+	status = gpio_request_array(panda_hdmi_gpios,
+				    ARRAY_SIZE(panda_hdmi_gpios));
+	if (status)
+		pr_err("Cannot request HDMI GPIOs\n");
+
+	return status;
+}
+
+static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
+{
+	gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
+}
+
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+	.hpd_gpio = HDMI_GPIO_HPD,
+};
+
+static struct omap_dss_device  omap4_panda_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.platform_enable = omap4_panda_panel_enable_hdmi,
+	.platform_disable = omap4_panda_panel_disable_hdmi,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+	.data = &omap4_panda_hdmi_data,
+};
+
+static struct omap_dss_device *omap4_panda_dss_devices[] = {
+	&omap4_panda_dvi_device,
+	&omap4_panda_hdmi_device,
+};
+
+static struct omap_dss_board_info omap4_panda_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
+	.devices	= omap4_panda_dss_devices,
+	.default_device	= &omap4_panda_dvi_device,
+};
+
+void __init omap4_panda_display_init(void)
+{
+	int r;
+
+	r = omap4_panda_dvi_init();
+	if (r)
+		pr_err("error initializing panda DVI\n");
+
+	omap_display_init(&omap4_panda_dss_data);
+
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
+
+	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
+}
+
+static void omap4_panda_init_rev(void)
+{
+	if (cpu_is_omap443x()) {
+		/* PandaBoard 4430 */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoard";
+		panda_abe_audio_data.has_hsmic = 1;
+	} else {
+		/* PandaBoard ES */
+		/* ASoC audio configuration */
+		panda_abe_audio_data.card_name = "PandaBoardES";
+	}
+}
+
+static void __init omap4_panda_init(void)
+{
+	int package = OMAP_PACKAGE_CBS;
+	int ret;
+
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		package = OMAP_PACKAGE_CBL;
+	omap4_mux_init(board_mux, NULL, package);
+
+	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
+	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
+	if (ret)
+		pr_err("error setting wl12xx data: %d\n", ret);
+
+	omap4_panda_init_rev();
+	omap4_panda_i2c_init();
+	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
+	platform_device_register(&omap_vwlan_device);
+	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+	omap4_twl6030_hsmmc_init(mmc);
+	omap4_ehci_init();
+	usb_musb_init(&musb_board_data);
+	omap4_panda_display_init();
+}
+
+MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
+	/* Maintainer: David Anders - Texas Instruments Inc */
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
+	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= omap4_panda_init,
+	.timer		= &omap4_timer,
+	.restart	= omap_prcm_restart,
+MACHINE_END