Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 291 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c
deleted file mode 100644
index 97a0af8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * DSM-G600 board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- * Copyright (C) 2006 Tower Technologies
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c:
- *	Copyright (C) 2005 Tower Technologies
- * based on nslu2-io.c:
- *	Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Michael Westerhof <mwester@dls.net>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ		66000000
-
-/* Buttons */
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
-
-static struct flash_platform_data dsmg600_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource dsmg600_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device dsmg600_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &dsmg600_flash_data,
-	.num_resources		= 1,
-	.resource		= &dsmg600_flash_resource,
-};
-
-static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
-	.sda_pin		= DSMG600_SDA_PIN,
-	.scl_pin		= DSMG600_SCL_PIN,
-};
-
-static struct platform_device dsmg600_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= &dsmg600_i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led dsmg600_led_pins[] = {
-	{
-		.name		= "dsmg600:green:power",
-		.gpio		= DSMG600_LED_PWR_GPIO,
-	},
-	{
-		.name		= "dsmg600:green:wlan",
-		.gpio		= DSMG600_LED_WLAN_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data dsmg600_led_data = {
-	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),
-	.leds			= dsmg600_led_pins,
-};
-
-static struct platform_device dsmg600_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &dsmg600_led_data,
-};
-
-static struct resource dsmg600_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port dsmg600_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device dsmg600_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= dsmg600_uart_data,
-	.num_resources		= ARRAY_SIZE(dsmg600_uart_resources),
-	.resource		= dsmg600_uart_resources,
-};
-
-static struct platform_device *dsmg600_devices[] __initdata = {
-	&dsmg600_i2c_gpio,
-	&dsmg600_flash,
-	&dsmg600_leds,
-};
-
-static void dsmg600_power_off(void)
-{
-	/* enable the pwr cntl gpio */
-	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* poweroff */
-	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
-}
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(unsigned long data);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-
-static void dsmg600_power_handler(unsigned long data)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (gpio_get_value(DSMG600_PB_GPIO)) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown > 0)
-			power_button_countdown--;
-
-	} else {
-
-		/* Done on button release, to allow for auto-power-on mods. */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action,
-			 * this will bypass init if it hasn't started
-			 * and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-		} else {
-			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-		}
-	}
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static void __init dsmg600_timer_init(void)
-{
-    /* The xtal on this machine is non-standard. */
-    ixp4xx_timer_freq = DSMG600_FREQ;
-
-    /* Call standard timer_init function. */
-    ixp4xx_timer_init();
-}
-
-static struct sys_timer dsmg600_timer = {
-    .init   = dsmg600_timer_init,
-};
-
-static void __init dsmg600_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
-	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	dsmg600_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	i2c_register_board_info(0, dsmg600_i2c_board_info,
-				ARRAY_SIZE(dsmg600_i2c_board_info));
-
-	/* The UART is required on the DSM-G600 (Redboot cannot use the
-	 * NIC) -- do it here so that it does *not* get removed if
-	 * platform_add_devices fails!
-         */
-        (void)platform_device_register(&dsmg600_uart);
-
-	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-
-	pm_power_off = dsmg600_power_off;
-
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &dsmg600_timer,
-	.init_machine	= dsmg600_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END