Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 141 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c
deleted file mode 100644
index 1b831100..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
- * Board setup for ADI Engineering and IXDGP425 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define COYOTE_IDE_REGION_SIZE	0x1000
-
-#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-static struct flash_platform_data coyote_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource coyote_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device coyote_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &coyote_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_flash_resource,
-};
-
-static struct resource coyote_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port coyote_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device coyote_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= coyote_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_uart_resource,
-};
-
-static struct platform_device *coyote_devices[] __initdata = {
-	&coyote_flash,
-	&coyote_uart
-};
-
-static void __init coyote_init(void)
-{
-	ixp4xx_sys_init();
-
-	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	if (machine_is_ixdpg425()) {
-		coyote_uart_data[0].membase =
-			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
-		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
-	}
-
-	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
-}
-
-#ifdef CONFIG_ARCH_ADI_COYOTE
-MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-/*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
- */
-#ifdef CONFIG_MACH_IXDPG425
-MACHINE_START(IXDPG425, "Intel IXDPG425")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-