Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 479 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c b/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c
deleted file mode 100644
index 3e538da6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/impd1.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file provides the core support for the IM-PD1 module.
- *
- * Module / boot parameters.
- *   lmid=n   impd1.lmid=n - set the logic module position in stack to 'n'
- */
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/clkdev.h>
-
-#include <asm/hardware/icst.h>
-#include <mach/lm.h>
-#include <mach/impd1.h>
-#include <asm/sizes.h>
-
-static int module_id;
-
-module_param_named(lmid, module_id, int, 0444);
-MODULE_PARM_DESC(lmid, "logic module stack position");
-
-struct impd1_module {
-	void __iomem	*base;
-	struct clk	vcos[2];
-	struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
-	.ref		= 24000000,	/* 24 MHz */
-	.vco_max	= ICST525_VCO_MAX_3V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 519,
-	.rd_min		= 3,
-	.rd_max		= 120,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
-	struct impd1_module *impd1 = clk->data;
-	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 7;
-
-	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
-		 vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= impd1_setvco,
-};
-
-void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
-{
-	struct impd1_module *impd1 = dev_get_drvdata(dev);
-	u32 cur;
-
-	val &= mask;
-	cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
-	writel(cur | val, impd1->base + IMPD1_CTRL);
-}
-
-EXPORT_SYMBOL(impd1_tweak_control);
-
-/*
- * CLCD support
- */
-#define PANEL		PROSPECTOR
-
-#define LTM10C209		1
-#define PROSPECTOR		2
-#define SVGA			3
-#define VGA			4
-
-#if PANEL == VGA
-#define PANELTYPE	vga
-static struct clcd_panel vga = {
-	.mode		= {
-		.name		= "VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.connector	= IMPD1_CTRL_DISP_VGA,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == SVGA
-#define PANELTYPE	svga
-static struct clcd_panel svga = {
-	.mode		= {
-		.name		= "SVGA",
-		.refresh	= 0,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 27778,
-		.left_margin	= 20,
-		.right_margin	= 20,
-		.upper_margin	= 5,
-		.lower_margin	= 5,
-		.hsync_len	= 164,
-		.vsync_len	= 62,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.connector	= IMPD1_CTRL_DISP_VGA,
-	.caps		= CLCD_CAP_5551,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == PROSPECTOR
-#define PANELTYPE	prospector
-static struct clcd_panel prospector = {
-	.mode		= {
-		.name		= "PROSPECTOR",
-		.refresh	= 0,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 40000,
-		.left_margin	= 33,
-		.right_margin	= 64,
-		.upper_margin	= 36,
-		.lower_margin	= 7,
-		.hsync_len	= 64,
-		.vsync_len	= 25,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.fixedtimings	= 1,
-	.connector	= IMPD1_CTRL_DISP_LCD,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == LTM10C209
-#define PANELTYPE	ltm10c209
-/*
- * Untested.
- */
-static struct clcd_panel ltm10c209 = {
-	.mode		= {
-		.name		= "LTM10C209",
-		.refresh	= 0,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 40000,
-		.left_margin	= 20,
-		.right_margin	= 20,
-		.upper_margin	= 19,
-		.lower_margin	= 19,
-		.hsync_len	= 20,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.fixedtimings	= 1,
-	.connector	= IMPD1_CTRL_DISP_LCD,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-#endif
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void impd1fb_clcd_disable(struct clcd_fb *fb)
-{
-	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void impd1fb_clcd_enable(struct clcd_fb *fb)
-{
-	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
-			fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
-}
-
-static int impd1fb_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned long framebase = fb->dev->res.start + 0x01000000;
-	unsigned long framesize = SZ_1M;
-	int ret = 0;
-
-	fb->panel = &PANELTYPE;
-
-	if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
-		printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
-		return -EBUSY;
-	}
-
-	fb->fb.screen_base = ioremap(framebase, framesize);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
-		ret = -ENOMEM;
-		goto free_buffer;
-	}
-
-	fb->fb.fix.smem_start	= framebase;
-	fb->fb.fix.smem_len	= framesize;
-
-	return 0;
-
- free_buffer:
-	release_mem_region(framebase, framesize);
-	return ret;
-}
-
-static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	unsigned long start, size;
-
-	start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
-	size = vma->vm_end - vma->vm_start;
-
-	return remap_pfn_range(vma, vma->vm_start, start, size,
-			       vma->vm_page_prot);
-}
-
-static void impd1fb_clcd_remove(struct clcd_fb *fb)
-{
-	iounmap(fb->fb.screen_base);
-	release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static struct clcd_board impd1_clcd_data = {
-	.name		= "IM-PD/1",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= impd1fb_clcd_disable,
-	.enable		= impd1fb_clcd_enable,
-	.setup		= impd1fb_clcd_setup,
-	.mmap		= impd1fb_clcd_mmap,
-	.remove		= impd1fb_clcd_remove,
-};
-
-struct impd1_device {
-	unsigned long	offset;
-	unsigned int	irq[2];
-	unsigned int	id;
-	void		*platform_data;
-};
-
-static struct impd1_device impd1_devs[] = {
-	{
-		.offset	= 0x03000000,
-		.id	= 0x00041190,
-	}, {
-		.offset	= 0x00100000,
-		.irq	= { 1 },
-		.id	= 0x00141011,
-	}, {
-		.offset	= 0x00200000,
-		.irq	= { 2 },
-		.id	= 0x00141011,
-	}, {
-		.offset	= 0x00300000,
-		.irq	= { 3 },
-		.id	= 0x00041022,
-	}, {
-		.offset	= 0x00400000,
-		.irq	= { 4 },
-		.id	= 0x00041061,
-	}, {
-		.offset	= 0x00500000,
-		.irq	= { 5 },
-		.id	= 0x00041061,
-	}, {
-		.offset	= 0x00600000,
-		.irq	= { 6 },
-		.id	= 0x00041130,
-	}, {
-		.offset	= 0x00700000,
-		.irq	= { 7, 8 },
-		.id	= 0x00041181,
-	}, {
-		.offset	= 0x00800000,
-		.irq	= { 9 },
-		.id	= 0x00041041,
-	}, {
-		.offset	= 0x01000000,
-		.irq	= { 11 },
-		.id	= 0x00041110,
-		.platform_data = &impd1_clcd_data,
-	}
-};
-
-static struct clk fixed_14745600 = {
-	.rate = 14745600,
-};
-
-static int impd1_probe(struct lm_device *dev)
-{
-	struct impd1_module *impd1;
-	int i, ret;
-
-	if (dev->id != module_id)
-		return -EINVAL;
-
-	if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
-		return -EBUSY;
-
-	impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
-	if (!impd1) {
-		ret = -ENOMEM;
-		goto release_lm;
-	}
-
-	impd1->base = ioremap(dev->resource.start, SZ_4K);
-	if (!impd1->base) {
-		ret = -ENOMEM;
-		goto free_impd1;
-	}
-
-	lm_set_drvdata(dev, impd1);
-
-	printk("IM-PD1 found at 0x%08lx\n",
-		(unsigned long)dev->resource.start);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
-		impd1->vcos[i].ops = &impd1_clk_ops,
-		impd1->vcos[i].owner = THIS_MODULE,
-		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1;
-	}
-	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
-	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
-	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
-					dev->id);
-	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
-					dev->id);
-	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
-					dev->id);
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_add(impd1->clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
-		struct impd1_device *idev = impd1_devs + i;
-		struct amba_device *d;
-		unsigned long pc_base;
-
-		pc_base = dev->resource.start + idev->offset;
-
-		d = amba_device_alloc(NULL, pc_base, SZ_4K);
-		if (!d)
-			continue;
-
-		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-		d->dev.parent	= &dev->dev;
-		d->irq[0]	= dev->irq;
-		d->irq[1]	= dev->irq;
-		d->periphid	= idev->id;
-		d->dev.platform_data = idev->platform_data;
-
-		ret = amba_device_add(d, &dev->resource);
-		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			amba_device_put(d);
-		}
-	}
-
-	return 0;
-
- free_impd1:
-	if (impd1 && impd1->base)
-		iounmap(impd1->base);
-	kfree(impd1);
- release_lm:
-	release_mem_region(dev->resource.start, SZ_4K);
-	return ret;
-}
-
-static int impd1_remove_one(struct device *dev, void *data)
-{
-	device_unregister(dev);
-	return 0;
-}
-
-static void impd1_remove(struct lm_device *dev)
-{
-	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	int i;
-
-	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_drop(impd1->clks[i]);
-
-	lm_set_drvdata(dev, NULL);
-
-	iounmap(impd1->base);
-	kfree(impd1);
-	release_mem_region(dev->resource.start, SZ_4K);
-}
-
-static struct lm_driver impd1_driver = {
-	.drv = {
-		.name	= "impd1",
-	},
-	.probe		= impd1_probe,
-	.remove		= impd1_remove,
-};
-
-static int __init impd1_init(void)
-{
-	return lm_driver_register(&impd1_driver);
-}
-
-static void __exit impd1_exit(void)
-{
-	lm_driver_unregister(&impd1_driver);
-}
-
-module_init(impd1_init);
-module_exit(impd1_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
-MODULE_AUTHOR("Deep Blue Solutions Ltd");