init android origin source code

1 files changed, 115 insertions, 0 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c b/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c
new file mode 100644
index 00000000..1875740f
--- /dev/null
+++ b/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c
@@ -0,0 +1,115 @@
+/*
+ * TI DaVinci serial driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/serial.h>
+#include <mach/cputype.h>
+
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+
+	WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset);
+
+	return (unsigned int)__raw_readl(up->membase + offset);
+}
+
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+
+	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
+
+	__raw_writel(value, p->membase + offset);
+}
+
+static void __init davinci_serial_reset(struct plat_serial8250_port *p)
+{
+	unsigned int pwremu = 0;
+
+	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
+
+	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+	mdelay(10);
+
+	pwremu |= (0x3 << 13);
+	pwremu |= 0x1;
+	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+	if (cpu_is_davinci_dm646x())
+		serial_write_reg(p, UART_DM646X_SCR,
+				 UART_DM646X_SCR_TX_WATERMARK);
+}
+
+int __init davinci_serial_init(struct davinci_uart_config *info)
+{
+	int i;
+	char name[16];
+	struct clk *uart_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct device *dev = &soc_info->serial_dev->dev;
+	struct plat_serial8250_port *p = dev->platform_data;
+
+	/*
+	 * Make sure the serial ports are muxed on at this point.
+	 * You have to mux them off in device drivers later on if not needed.
+	 */
+	for (i = 0; p->flags; i++, p++) {
+		if (!(info->enabled_uarts & (1 << i)))
+			continue;
+
+		sprintf(name, "uart%d", i);
+		uart_clk = clk_get(dev, name);
+		if (IS_ERR(uart_clk)) {
+			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+					__func__, __LINE__, i);
+			continue;
+		}
+
+		clk_enable(uart_clk);
+		p->uartclk = clk_get_rate(uart_clk);
+
+		if (!p->membase && p->mapbase) {
+			p->membase = ioremap(p->mapbase, SZ_4K);
+
+			if (p->membase)
+				p->flags &= ~UPF_IOREMAP;
+			else
+				pr_err("uart regs ioremap failed\n");
+		}
+
+		if (p->membase && p->type != PORT_AR7)
+			davinci_serial_reset(p);
+	}
+
+	return platform_device_register(soc_info->serial_dev);
+}