Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

24 files changed, 0 insertions, 1789 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig
deleted file mode 100644
index eb34bd12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-if ARCH_CLPS711X
-
-menu "CLPS711X/EP721X Implementations"
-
-config ARCH_AUTCPU12
-	bool "AUTCPU12"
-	help
-	  Say Y if you intend to run the kernel on the autronix autcpu12
-	  board. This board is based on a Cirrus Logic CS89712.
-
-config ARCH_CDB89712
-	bool "CDB89712"
-	select ISA
-	help
-	  This is an evaluation board from Cirrus for the CS89712 processor.
-	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
-	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
-
-config ARCH_CEIVA
-	bool "CEIVA"
-	help
-	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-
-config ARCH_CLEP7312
-	bool "CLEP7312"
-	help
-	  Boards based on the Cirrus Logic 7212/7312 chips.
-
-config ARCH_EDB7211
-	bool "EDB7211"
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	help
-	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
-	  evaluation board.
-
-config ARCH_P720T
-	bool "P720T"
-	help
-	  Say Y here if you intend to run this kernel on the ARM Prospector
-	  720T.
-
-config ARCH_FORTUNET
-	bool "FORTUNET"
-
-# XXX Maybe these should indicate register compatibility
-# instead of being mutually exclusive.
-config ARCH_EP7211
-	bool
-	depends on ARCH_EDB7211
-	default y
-
-config ARCH_EP7212
-	bool
-	depends on ARCH_P720T || ARCH_CEIVA
-	default y
-
-config EP72XX_ROM_BOOT
-	bool "EP72xx ROM boot"
-	depends on ARCH_EP7211 || ARCH_EP7212
-	---help---
-	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
-	  mode memory map instead of the normal memory map.
-
-	  Processors derived from the Cirrus CLPS-711X core support two boot
-	  modes.  Normal mode boots from the external memory device at CS0.
-	  Bootstrap mode rearranges parts of the memory map, placing an
-	  internal 128 byte bootstrap ROM at CS0.  This option performs the
-	  address map changes required to support booting in this mode.
-
-	  You almost surely want to say N here.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile b/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile
deleted file mode 100644
index f2f02562..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
-obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
-obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
-obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
-obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
-obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_ARCH_P720T)    += p720t.o
-leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
-obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot
deleted file mode 100644
index 9398e859..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot
+++ /dev/null
@@ -1,6 +0,0 @@
-# The standard locations for stuff on CLPS711x type processors
-   zreladdr-y				+= 0xc0028000
-params_phys-y				:= 0xc0000100
-# Should probably have some agreement on these...
-initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
-initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c
deleted file mode 100644
index 3fb79a1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/autcpu12.c
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <mach/autcpu12.h>
-
-#include "common.h"
-
-/*
- * The on-chip registers are given a size of 1MB so that a section can
- * be used to map them; this saves a page table.  This is the place to
- * add mappings for ROM, expansion memory, PCMCIA, etc.  (if static
- * mappings are chosen for those areas).
- *
-*/
-
-static struct map_desc autcpu12_io_desc[] __initdata = {
-	/* memory-mapped extra io and CS8900A Ethernet chip */
- 	/* ethernet chip */
- 	{
-		.virtual	= AUTCPU12_VIRT_CS8900A,
-		.pfn		= __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init autcpu12_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc));
-}
-
-MACHINE_START(AUTCPU12, "autronix autcpu12")
-	/* Maintainer: Thomas Gleixner */
-	.atag_offset	= 0x20000,
-	.map_io		= autcpu12_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c
deleted file mode 100644
index c314f49d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/cdb89712.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-/*
- * Map the CS89712 Ethernet port.  That should be moved to the
- * ethernet driver, perhaps.
- */
-static struct map_desc cdb89712_io_desc[] __initdata = {
-	{
-		.virtual	= ETHER_BASE,
-		.pfn		=__phys_to_pfn(ETHER_START),
-		.length		= ETHER_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init cdb89712_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc));
-}
-
-MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	/* Maintainer: Ray Lehtiniemi */
-	.atag_offset	= 0x100,
-	.map_io		= cdb89712_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c
deleted file mode 100644
index a70147e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-ceiva.c
- *
- *  Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/kernel.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct map_desc ceiva_io_desc[] __initdata = {
- 	/* SED1355 controlled video RAM & registers */
- 	{
-		.virtual	= CEIVA_VIRT_SED1355,
-		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	}
-};
-
-
-static void __init ceiva_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
-}
-
-
-MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	/* Maintainer: Rob Scott */
-	.atag_offset	= 0x100,
-	.map_io		= ceiva_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c
deleted file mode 100644
index dbc78426..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/clep7312.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static void __init
-fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = 0x01000000;
-}
-
-
-MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	/* Maintainer: Nobody */
-	.atag_offset	= 0x0100,
-	.fixup		= fixup_clep7312,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c
deleted file mode 100644
index 3c5b5bbf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/core.c
- *
- *  Core support for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/system_misc.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
-
-static void int1_mask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-}
-
-static void int1_ack(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-
-	switch (d->irq) {
-	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
-	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
-	case IRQ_TC2OI:  clps_writel(0, TC2EOI); break;
-	case IRQ_RTCMI:  clps_writel(0, RTCEOI); break;
-	case IRQ_TINT:   clps_writel(0, TEOI);   break;
-	case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
-	}
-}
-
-static void int1_unmask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 |= 1 << d->irq;
-	clps_writel(intmr1, INTMR1);
-}
-
-static struct irq_chip int1_chip = {
-	.irq_ack	= int1_ack,
-	.irq_mask	= int1_mask,
-	.irq_unmask	= int1_unmask,
-};
-
-static void int2_mask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-}
-
-static void int2_ack(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-
-	switch (d->irq) {
-	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
-	}
-}
-
-static void int2_unmask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 |= 1 << (d->irq - 16);
-	clps_writel(intmr2, INTMR2);
-}
-
-static struct irq_chip int2_chip = {
-	.irq_ack	= int2_ack,
-	.irq_mask	= int2_mask,
-	.irq_unmask	= int2_unmask,
-};
-
-void __init clps711x_init_irq(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < NR_IRQS; i++) {
-	        if (INT1_IRQS & (1 << i)) {
-			irq_set_chip_and_handler(i, &int1_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}
-		if (INT2_IRQS & (1 << i)) {
-			irq_set_chip_and_handler(i, &int2_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-
-	/*
-	 * Disable interrupts
-	 */
-	clps_writel(0, INTMR1);
-	clps_writel(0, INTMR2);
-
-	/*
-	 * Clear down any pending interrupts
-	 */
-	clps_writel(0, COEOI);
-	clps_writel(0, TC1EOI);
-	clps_writel(0, TC2EOI);
-	clps_writel(0, RTCEOI);
-	clps_writel(0, TEOI);
-	clps_writel(0, UMSEOI);
-	clps_writel(0, SYNCIO);
-	clps_writel(0, KBDEOI);
-}
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
-	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
-	struct timespec tv;
-	unsigned int syscon;
-
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
-
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = clps_readl(RTCDR);
-	do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
-};
-
-void clps711x_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-static void clps711x_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov    r0, r0\n\
-	mov     r0, r0");
-}
-
-static int __init clps711x_idle_init(void)
-{
-	arm_pm_idle = clps711x_idle;
-	return 0;
-}
-
-arch_initcall(clps711x_idle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h
deleted file mode 100644
index fc0f0650..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/common.h
- *
- * Common bits.
- */
-
-struct sys_timer;
-
-extern void clps711x_map_io(void);
-extern void clps711x_init_irq(void);
-extern struct sys_timer clps711x_timer;
-extern void clps711x_restart(char mode, const char *cmd);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c
deleted file mode 100644
index 5fad0b4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-edb7211.c
- *
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-extern void edb7211_map_io(void);
-
-/* Reserve screen memory region at the start of main system memory. */
-static void __init edb7211_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, 0x00020000);
-}
-
-static void __init
-fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	/*
-	 * Bank start addresses are not present in the information
-	 * passed in from the boot loader.  We could potentially
-	 * detect them, but instead we hard-code them.
-	 *
-	 * Banks sizes _are_ present in the param block, but we're
-	 * not using that information yet.
-	 */
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = 8*1024*1024;
-	mi->bank[1].start = 0xc1000000;
-	mi->bank[1].size = 8*1024*1024;
-	mi->nr_banks = 2;
-}
-
-MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	/* Maintainer: Jon McClintock */
-	.atag_offset	= 0x20100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
-	.fixup		= fixup_edb7211,
-	.map_io		= edb7211_map_io,
-	.reserve	= edb7211_reserve,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c
deleted file mode 100644
index 4372f06c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/mm.c
- *
- *  Extra MM routines for the EDB7211 board
- *
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
- 
-#include <asm/mach/map.h>
-
-extern void clps711x_map_io(void);
-
-/*
- * The on-chip registers are given a size of 1MB so that a section can
- * be used to map them; this saves a page table.  This is the place to
- * add mappings for ROM, expansion memory, PCMCIA, etc.  (if static
- * mappings are chosen for those areas).
- *
- * Here is a physical memory map (to be fleshed out later):
- *
- * Physical Address  Size  Description
- * ----------------- ----- ---------------------------------
- * c0000000-c001ffff 128KB reserved for video RAM [1]
- * c0020000-c0023fff  16KB parameters (see Documentation/arm/Setup)
- * c0024000-c0027fff  16KB swapper_pg_dir (task 0 page directory)
- * c0028000-...            kernel image (TEXTADDR)
- *
- * [1] Unused pages should be given back to the VM; they are not yet.
- *     The parameter block should also be released (not sure if this
- *     happens).
- */
-static struct map_desc edb7211_io_desc[] __initdata = {
- 	{	/* memory-mapped extra keyboard row */
-	 	.virtual 	= EP7211_VIRT_EXTKBD,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {	/* and CS8900A Ethernet chip */
-		.virtual	= EP7211_VIRT_CS8900A,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_CS8900A),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, { 	/* flash banks */
-		.virtual	= EP7211_VIRT_FLASH1,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH1),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= EP7211_VIRT_FLASH2,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH2),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init edb7211_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c
deleted file mode 100644
index 3a3f0b70..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/fortunet.c
- *
- *  Derived from linux/arch/arm/mach-integrator/arch.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include <asm/memory.h>
-
-#include "common.h"
-
-struct meminfo memmap = {
-	.nr_banks	= 1,
-	.bank		= {
-		{
-			.start	= 0xC0000000,
-			.size	= 0x01000000,
-		},
-	},
-};
-
-typedef struct tag_IMAGE_PARAMS
-{
-	int	ramdisk_ok;
-	int	ramdisk_address;
-	int	ramdisk_size;
-	int	ram_size;
-	int	extra_param_type;
-	int	extra_param_ptr;
-	int	command_line;
-} IMAGE_PARAMS;
-
-#define IMAGE_PARAMS_PHYS	0xC01F0000
-
-static void __init
-fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
-	*cmdline = phys_to_virt(ip->command_line);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if(ip->ramdisk_ok)
-	{
-		initrd_start = __phys_to_virt(ip->ramdisk_address);
-		initrd_end = initrd_start + ip->ramdisk_size;
-	}
-#endif
-	memmap.bank[0].size = ip->ram_size;
-	*mi = memmap;
-}
-
-MACHINE_START(FORTUNET, "ARM-FortuNet")
-	/* Maintainer: FortuNet Inc. */
-	.fixup		= fortunet_fixup,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h
deleted file mode 100644
index 1588a365..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * AUTCPU12 specific defines
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_AUTCPU12_H
-#define __ASM_ARCH_AUTCPU12_H
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- */
-#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
-#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
-
-/*
- * The flash bank is wired to chip select 0
- */
-#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
-
-/* offset for device specific information structure */
-#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
-/*
-* Videomemory is the internal SRAM (CS 6)	
-*/
-#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
-#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
-
-/*
-* All special IO's are tied to CS1
-*/
-#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
-
-#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
-
-#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
-
-#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
-
-#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
-
-#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
-
-#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
-
-#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
-
-/* 
-* defines for smartmedia card access 
-*/
-#define AUTCPU12_SMC_RDY		(1<<2)
-#define AUTCPU12_SMC_ALE		(1<<3)
-#define AUTCPU12_SMC_CLE  		(1<<4)
-#define AUTCPU12_SMC_PORT_OFFSET	PBDR
-#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
-/*
-* defines for lcd contrast 
-*/
-#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
-#define	AUTCPU12_DPOT_CS		(1<<0)
-#define AUTCPU12_DPOT_CLK    		(1<<1)
-#define	AUTCPU12_DPOT_UD		(1<<2)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S
deleted file mode 100644
index b802e8a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-clps711x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	addruart, rp, rv, tmp
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		mov	\rp, #0x0000	@ UART1
-#else
-		mov	\rp, #0x1000	@ UART2
-#endif
-		orr	\rv, \rp, #CLPS7111_VIRT_BASE
-		orr	\rp, \rp, #CLPS7111_PHYS_BASE
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
-		bne	1001b
-1002:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S
deleted file mode 100644
index 125af59d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h
deleted file mode 100644
index d0b7d870..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h
deleted file mode 100644
index 30b7e972..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h
deleted file mode 100644
index 3a032a67..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) - PHYS_OFFSET)
-#define __bus_to_pfn(x)		__phys_to_pfn((x) + PHYS_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory.  In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define SECTION_SIZE_BITS	24
-#define MAX_PHYSMEM_BITS	32
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h
deleted file mode 100644
index f7f4c120..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off)	(off)
-#endif
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h
deleted file mode 100644
index 61fef912..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	xtime_update(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h
deleted file mode 100644
index ac8823cc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h
deleted file mode 100644
index 35ed731b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index dd9a6cdb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/leds.c
- *
- *  Integrator LED control routines
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 pddr;
-
-	local_irq_save(flags);
-	switch(ledevt) {
-	case led_idle_start:
-		break;
-
-	case led_idle_end:
-		break;
-
-	case led_timer:
-		pddr = clps_readb(PDDR);
-		clps_writeb(pddr ^ 1, PDDR);
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_p720t())
-		leds_event = p720t_leds_event;
-
-	return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c
deleted file mode 100644
index 42ee8f33..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/p720t.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/syspld.h>
-
-#include "common.h"
-
-/*
- * Map the P720T system PLD.  It occupies two address spaces:
- *  SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000
- * We map both here.
- */
-static struct map_desc p720t_io_desc[] __initdata = {
-	{
-		.virtual	= SYSPLD_VIRT_BASE,
-		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= 0xfe400000,
-		.pfn		= __phys_to_pfn(0x10400000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init
-fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
-{
-	/*
-	 * Our bootloader doesn't setup any tags (yet).
-	 */
-	if (tag->hdr.tag != ATAG_CORE) {
-		tag->hdr.tag = ATAG_CORE;
-		tag->hdr.size = tag_size(tag_core);
-		tag->u.core.flags = 0;
-		tag->u.core.pagesize = PAGE_SIZE;
-		tag->u.core.rootdev = 0x0100;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = 4096;
-		tag->u.mem.start = PHYS_OFFSET;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_NONE;
-		tag->hdr.size = 0;
-	}
-}
-
-static void __init p720t_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
-}
-
-MACHINE_START(P720T, "ARM-Prospector720T")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= fixup_p720t,
-	.map_io		= p720t_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
-static int p720t_hw_init(void)
-{
-	/*
-	 * Power down as much as possible in case we don't
-	 * have the drivers loaded.
-	 */
-	PLD_LCDEN = 0;
-	PLD_PWR  &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
-
-	PLD_KBD   = 0;
-	PLD_IO    = 0;
-	PLD_IRDA  = 0;
-	PLD_CODEC = 0;
-	PLD_TCH   = 0;
-	PLD_SPI   = 0;
-#ifndef CONFIG_DEBUG_LL
-	PLD_COM2  = 0;
-	PLD_COM1  = 0;
-#endif
-
-	return 0;
-}
-
-__initcall(p720t_hw_init);
-