Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 170 deletions

diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c
deleted file mode 100644
index 18151520..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-flexibity.c
- *
- *  Copyright (C) 2010-2011 Flexibity
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-static void __init flexibity_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/* USB Host port */
-static struct at91_usbh_data __initdata flexibity_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/* USB Device port */
-static struct at91_udc_data __initdata flexibity_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-/* I2C devices */
-static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1307", 0x68),
-	},
-};
-
-/* SPI devices */
-static struct spi_board_info flexibity_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-/* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
-};
-
-/* LEDs */
-static struct gpio_led flexibity_leds[] = {
-	{
-		.name			= "usb1:green",
-		.gpio			= AT91_PIN_PA12,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb1:red",
-		.gpio			= AT91_PIN_PA13,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb2:green",
-		.gpio			= AT91_PIN_PB26,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb2:red",
-		.gpio			= AT91_PIN_PB27,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb3:green",
-		.gpio			= AT91_PIN_PC8,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb3:red",
-		.gpio			= AT91_PIN_PC6,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb4:green",
-		.gpio			= AT91_PIN_PB4,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb4:red",
-		.gpio			= AT91_PIN_PB5,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	}
-};
-
-static void __init flexibity_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&flexibity_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&flexibity_udc_data);
-	/* I2C */
-	at91_add_device_i2c(flexibity_i2c_devices,
-		ARRAY_SIZE(flexibity_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(flexibity_spi_devices,
-		ARRAY_SIZE(flexibity_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
-	/* LEDs */
-	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
-}
-
-MACHINE_START(FLEXIBITY, "Flexibity Connect")
-	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= flexibity_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= flexibity_board_init,
-MACHINE_END