Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 0 insertions, 1576 deletions

diff --git a/ANDROID_3.4.5/Makefile b/ANDROID_3.4.5/Makefile
deleted file mode 100644
index c5a95e5a..00000000
--- a/ANDROID_3.4.5/Makefile
+++ /dev/null
@@ -1,1576 +0,0 @@
-VERSION = 3
-PATCHLEVEL = 4
-SUBLEVEL = 5
-EXTRAVERSION =
-NAME = Saber-toothed Squirrel
-
-# *DOCUMENTATION*
-# To see a list of typical targets execute "make help"
-# More info can be located in ./README
-# Comments in this file are targeted only to the developer, do not
-# expect to learn how to build the kernel reading this file.
-
-# Do not:
-# o  use make's built-in rules and variables
-#    (this increases performance and avoids hard-to-debug behaviour);
-# o  print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
-
-# Avoid funny character set dependencies
-unexport LC_ALL
-LC_COLLATE=C
-LC_NUMERIC=C
-export LC_COLLATE LC_NUMERIC
-
-# We are using a recursive build, so we need to do a little thinking
-# to get the ordering right.
-#
-# Most importantly: sub-Makefiles should only ever modify files in
-# their own directory. If in some directory we have a dependency on
-# a file in another dir (which doesn't happen often, but it's often
-# unavoidable when linking the built-in.o targets which finally
-# turn into vmlinux), we will call a sub make in that other dir, and
-# after that we are sure that everything which is in that other dir
-# is now up to date.
-#
-# The only cases where we need to modify files which have global
-# effects are thus separated out and done before the recursive
-# descending is started. They are now explicitly listed as the
-# prepare rule.
-
-# To put more focus on warnings, be less verbose as default
-# Use 'make V=1' to see the full commands
-
-ifeq ("$(origin V)", "command line")
-  KBUILD_VERBOSE = $(V)
-endif
-ifndef KBUILD_VERBOSE
-  KBUILD_VERBOSE = 0
-endif
-
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
-
-ifeq ("$(origin C)", "command line")
-  KBUILD_CHECKSRC = $(C)
-endif
-ifndef KBUILD_CHECKSRC
-  KBUILD_CHECKSRC = 0
-endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
-  KBUILD_EXTMOD ?= $(SUBDIRS)
-endif
-
-ifeq ("$(origin M)", "command line")
-  KBUILD_EXTMOD := $(M)
-endif
-
-# kbuild supports saving output files in a separate directory.
-# To locate output files in a separate directory two syntaxes are supported.
-# In both cases the working directory must be the root of the kernel src.
-# 1) O=
-# Use "make O=dir/to/store/output/files/"
-#
-# 2) Set KBUILD_OUTPUT
-# Set the environment variable KBUILD_OUTPUT to point to the directory
-# where the output files shall be placed.
-# export KBUILD_OUTPUT=dir/to/store/output/files/
-# make
-#
-# The O= assignment takes precedence over the KBUILD_OUTPUT environment
-# variable.
-
-
-# KBUILD_SRC is set on invocation of make in OBJ directory
-# KBUILD_SRC is not intended to be used by the regular user (for now)
-ifeq ($(KBUILD_SRC),)
-
-# OK, Make called in directory where kernel src resides
-# Do we want to locate output files in a separate directory?
-ifeq ("$(origin O)", "command line")
-  KBUILD_OUTPUT := $(O)
-endif
-
-ifeq ("$(origin W)", "command line")
-  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
-endif
-
-# That's our default target when none is given on the command line
-PHONY := _all
-_all:
-
-# Cancel implicit rules on top Makefile
-$(CURDIR)/Makefile Makefile: ;
-
-ifneq ($(KBUILD_OUTPUT),)
-# Invoke a second make in the output directory, passing relevant variables
-# check that the output directory actually exists
-saved-output := $(KBUILD_OUTPUT)
-KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
-$(if $(KBUILD_OUTPUT),, \
-     $(error output directory "$(saved-output)" does not exist))
-
-PHONY += $(MAKECMDGOALS) sub-make
-
-$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
-	$(Q)@:
-
-sub-make: FORCE
-	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
-	KBUILD_SRC=$(CURDIR) \
-	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
-	$(filter-out _all sub-make,$(MAKECMDGOALS))
-
-# Leave processing to above invocation of make
-skip-makefile := 1
-endif # ifneq ($(KBUILD_OUTPUT),)
-endif # ifeq ($(KBUILD_SRC),)
-
-# We process the rest of the Makefile if this is the final invocation of make
-ifeq ($(skip-makefile),)
-
-# If building an external module we do not care about the all: rule
-# but instead _all depend on modules
-PHONY += all
-ifeq ($(KBUILD_EXTMOD),)
-_all: all
-else
-_all: modules
-endif
-
-srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-objtree		:= $(CURDIR)
-src		:= $(srctree)
-obj		:= $(objtree)
-
-VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
-
-export srctree objtree VPATH
-
-
-# SUBARCH tells the usermode build what the underlying arch is.  That is set
-# first, and if a usermode build is happening, the "ARCH=um" on the command
-# line overrides the setting of ARCH below.  If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and 
-# SUBARCH is subsequently ignored.
-
-SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-				  -e s/arm.*/arm/ -e s/sa110/arm/ \
-				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ )
-
-# Cross compiling and selecting different set of gcc/bin-utils
-# ---------------------------------------------------------------------------
-#
-# When performing cross compilation for other architectures ARCH shall be set
-# to the target architecture. (See arch/* for the possibilities).
-# ARCH can be set during invocation of make:
-# make ARCH=ia64
-# Another way is to have ARCH set in the environment.
-# The default ARCH is the host where make is executed.
-
-# CROSS_COMPILE specify the prefix used for all executables used
-# during compilation. Only gcc and related bin-utils executables
-# are prefixed with $(CROSS_COMPILE).
-# CROSS_COMPILE can be set on the command line
-# make CROSS_COMPILE=ia64-linux-
-# Alternatively CROSS_COMPILE can be set in the environment.
-# A third alternative is to store a setting in .config so that plain
-# "make" in the configured kernel build directory always uses that.
-# Default value for CROSS_COMPILE is not to prefix executables
-# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-export KBUILD_BUILDHOST := $(SUBARCH)
-ARCH		?= arm
-CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
-
-# Architecture as present in compile.h
-UTS_MACHINE 	:= $(ARCH)
-SRCARCH 	:= $(ARCH)
-
-# Additional ARCH settings for x86
-ifeq ($(ARCH),i386)
-        SRCARCH := x86
-endif
-ifeq ($(ARCH),x86_64)
-        SRCARCH := x86
-endif
-
-# Additional ARCH settings for sparc
-ifeq ($(ARCH),sparc32)
-       SRCARCH := sparc
-endif
-ifeq ($(ARCH),sparc64)
-       SRCARCH := sparc
-endif
-
-# Additional ARCH settings for sh
-ifeq ($(ARCH),sh64)
-       SRCARCH := sh
-endif
-
-# Additional ARCH settings for tile
-ifeq ($(ARCH),tilepro)
-       SRCARCH := tile
-endif
-ifeq ($(ARCH),tilegx)
-       SRCARCH := tile
-endif
-
-# Where to locate arch specific headers
-hdr-arch  := $(SRCARCH)
-
-ifeq ($(ARCH),m68knommu)
-       hdr-arch  := m68k
-endif
-
-KCONFIG_CONFIG	?= .config
-export KCONFIG_CONFIG
-
-# SHELL used by kbuild
-CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-	  else if [ -x /bin/bash ]; then echo /bin/bash; \
-	  else echo sh; fi ; fi)
-
-HOSTCC       = gcc
-HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTCXXFLAGS = -O2
-
-# Decide whether to build built-in, modular, or both.
-# Normally, just do built-in.
-
-KBUILD_MODULES :=
-KBUILD_BUILTIN := 1
-
-#	If we have only "make modules", don't compile built-in objects.
-#	When we're building modules with modversions, we need to consider
-#	the built-in objects during the descend as well, in order to
-#	make sure the checksums are up to date before we record them.
-
-ifeq ($(MAKECMDGOALS),modules)
-  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
-endif
-
-#	If we have "make <whatever> modules", compile modules
-#	in addition to whatever we do anyway.
-#	Just "make" or "make all" shall build modules as well
-
-ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
-  KBUILD_MODULES := 1
-endif
-
-ifeq ($(MAKECMDGOALS),)
-  KBUILD_MODULES := 1
-endif
-
-export KBUILD_MODULES KBUILD_BUILTIN
-export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed. 
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-#	$(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
-  quiet =
-  Q =
-else
-  quiet=quiet_
-  Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
-  quiet=silent_
-endif
-
-export quiet Q KBUILD_VERBOSE
-
-
-# Look for make include files relative to root of kernel src
-MAKEFLAGS += --include-dir=$(srctree)
-
-# We need some generic definitions (do not try to remake the file).
-$(srctree)/scripts/Kbuild.include: ;
-include $(srctree)/scripts/Kbuild.include
-
-# Make variables (CC, etc...)
-
-AS		= $(CROSS_COMPILE)as
-LD		= $(CROSS_COMPILE)ld
-CC		= $(CROSS_COMPILE)gcc
-CPP		= $(CC) -E
-AR		= $(CROSS_COMPILE)ar
-NM		= $(CROSS_COMPILE)nm
-STRIP		= $(CROSS_COMPILE)strip
-OBJCOPY		= $(CROSS_COMPILE)objcopy
-OBJDUMP		= $(CROSS_COMPILE)objdump
-AWK		= awk
-GENKSYMS	= scripts/genksyms/genksyms
-INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
-KALLSYMS	= scripts/kallsyms
-PERL		= perl
-CHECK		= sparse
-
-CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-		  -Wbitwise -Wno-return-void $(CF)
-CFLAGS_MODULE   =
-AFLAGS_MODULE   =
-LDFLAGS_MODULE  =
-CFLAGS_KERNEL	=
-AFLAGS_KERNEL	=
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
-
-
-# Use LINUXINCLUDE when you must reference the include/ directory.
-# Needed to be compatible with the O= option
-LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include \
-                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
-                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
-                   -include $(srctree)/include/linux/kconfig.h
-
-KBUILD_CPPFLAGS := -D__KERNEL__
-
-KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration \
-		   -Wno-format-security \
-		   -fno-delete-null-pointer-checks
-KBUILD_AFLAGS_KERNEL :=
-KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
-KBUILD_AFLAGS_MODULE  := -DMODULE
-KBUILD_CFLAGS_MODULE  := -DMODULE
-KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
-
-# Read KERNELRELEASE from include/config/kernel.release (if it exists)
-KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-
-export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
-export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP
-export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
-export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
-
-export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
-export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
-export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
-export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
-export KBUILD_ARFLAGS
-
-# When compiling out-of-tree modules, put MODVERDIR in the module
-# tree rather than in the kernel tree. The kernel tree might
-# even be read-only.
-export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-
-# Files to ignore in find ... statements
-
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
-
-# ===========================================================================
-# Rules shared between *config targets and build targets
-
-# Basic helpers built in scripts/
-PHONY += scripts_basic
-scripts_basic:
-	$(Q)$(MAKE) $(build)=scripts/basic
-	$(Q)rm -f .tmp_quiet_recordmcount
-
-# To avoid any implicit rule to kick in, define an empty command.
-scripts/basic/%: scripts_basic ;
-
-PHONY += outputmakefile
-# outputmakefile generates a Makefile in the output directory, if using a
-# separate output directory. This allows convenient use of make in the
-# output directory.
-outputmakefile:
-ifneq ($(KBUILD_SRC),)
-	$(Q)ln -fsn $(srctree) source
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
-	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
-endif
-
-# Support for using generic headers in asm-generic
-PHONY += asm-generic
-asm-generic:
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
-	            obj=arch/$(SRCARCH)/include/generated/asm
-
-# To make sure we do not include .config for any of the *config targets
-# catch them early, and hand them over to scripts/kconfig/Makefile
-# It is allowed to specify more targets when calling make, including
-# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
-# Detect when mixed targets is specified, and make a second invocation
-# of make so .config is not included in this case either (for *config).
-
-no-dot-config-targets := clean mrproper distclean \
-			 cscope gtags TAGS tags help %docs check% coccicheck \
-			 include/linux/version.h headers_% archheaders archscripts \
-			 kernelversion %src-pkg
-
-config-targets := 0
-mixed-targets  := 0
-dot-config     := 1
-
-ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
-	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
-		dot-config := 0
-	endif
-endif
-
-ifeq ($(KBUILD_EXTMOD),)
-        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
-                config-targets := 1
-                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
-                        mixed-targets := 1
-                endif
-        endif
-endif
-
-ifeq ($(mixed-targets),1)
-# ===========================================================================
-# We're called with mixed targets (*config and build targets).
-# Handle them one by one.
-
-%:: FORCE
-	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
-
-else
-ifeq ($(config-targets),1)
-# ===========================================================================
-# *config targets only - make sure prerequisites are updated, and descend
-# in scripts/kconfig to make the *config target
-
-# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
-# KBUILD_DEFCONFIG may point out an alternative default configuration
-# used for 'make defconfig'
-include $(srctree)/arch/$(SRCARCH)/Makefile
-export KBUILD_DEFCONFIG KBUILD_KCONFIG
-
-config: scripts_basic outputmakefile FORCE
-	$(Q)mkdir -p include/linux include/config
-	$(Q)$(MAKE) $(build)=scripts/kconfig $@
-
-%config: scripts_basic outputmakefile FORCE
-	$(Q)mkdir -p include/linux include/config
-	$(Q)$(MAKE) $(build)=scripts/kconfig $@
-
-else
-# ===========================================================================
-# Build targets only - this includes vmlinux, arch specific targets, clean
-# targets and others. In general all targets except *config targets.
-
-ifeq ($(KBUILD_EXTMOD),)
-# Additional helpers built in scripts/
-# Carefully list dependencies so we do not try to build scripts twice
-# in parallel
-PHONY += scripts
-scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
-	$(Q)$(MAKE) $(build)=$(@)
-
-# Objects we will link into vmlinux / subdirs we need to visit
-init-y		:= init/
-drivers-y	:= drivers/ sound/ firmware/
-net-y		:= net/
-libs-y		:= lib/
-core-y		:= usr/
-endif # KBUILD_EXTMOD
-
-ifeq ($(dot-config),1)
-# Read in config
--include include/config/auto.conf
-
-ifeq ($(KBUILD_EXTMOD),)
-# Read in dependencies to all Kconfig* files, make sure to run
-# oldconfig if changes are detected.
--include include/config/auto.conf.cmd
-
-# To avoid any implicit rule to kick in, define an empty command
-$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
-
-# If .config is newer than include/config/auto.conf, someone tinkered
-# with it and forgot to run make oldconfig.
-# if auto.conf.cmd is missing then we are probably in a cleaned tree so
-# we execute the config step to be sure to catch updated Kconfig files
-include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
-	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
-else
-# external modules needs include/generated/autoconf.h and include/config/auto.conf
-# but do not care if they are up-to-date. Use auto.conf to trigger the test
-PHONY += include/config/auto.conf
-
-include/config/auto.conf:
-	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
-	echo;								\
-	echo "  ERROR: Kernel configuration is invalid.";		\
-	echo "         include/generated/autoconf.h or $@ are missing.";\
-	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
-	echo;								\
-	/bin/false)
-
-endif # KBUILD_EXTMOD
-
-else
-# Dummy target needed, because used as prerequisite
-include/config/auto.conf: ;
-endif # $(dot-config)
-
-# The all: target is the default when no target is given on the
-# command line.
-# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults to vmlinux, but the arch makefile usually adds further targets
-all: vmlinux
-
-ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
-else
-KBUILD_CFLAGS	+= -O2
-endif
-
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
-ifneq ($(CONFIG_FRAME_WARN),0)
-KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
-endif
-
-# Force gcc to behave correct even for buggy distributions
-ifndef CONFIG_CC_STACKPROTECTOR
-KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
-endif
-
-# This warning generated too much noise in a regular build.
-# Use make W=1 to enable this warning (see scripts/Makefile.build)
-KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
-
-ifdef CONFIG_FRAME_POINTER
-KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
-else
-# Some targets (ARM with Thumb2, for example), can't be built with frame
-# pointers.  For those, we don't have FUNCTION_TRACER automatically
-# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
-# incompatible with -fomit-frame-pointer with current GCC, so we don't use
-# -fomit-frame-pointer with FUNCTION_TRACER.
-ifndef CONFIG_FUNCTION_TRACER
-KBUILD_CFLAGS	+= -fomit-frame-pointer
-endif
-endif
-
-ifdef CONFIG_DEBUG_INFO
-KBUILD_CFLAGS	+= -g
-KBUILD_AFLAGS	+= -gdwarf-2
-endif
-
-ifdef CONFIG_DEBUG_INFO_REDUCED
-KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
-endif
-
-ifdef CONFIG_FUNCTION_TRACER
-KBUILD_CFLAGS	+= -pg
-ifdef CONFIG_DYNAMIC_FTRACE
-	ifdef CONFIG_HAVE_C_RECORDMCOUNT
-		BUILD_C_RECORDMCOUNT := y
-		export BUILD_C_RECORDMCOUNT
-	endif
-endif
-endif
-
-# We trigger additional mismatches with less inlining
-ifdef CONFIG_DEBUG_SECTION_MISMATCH
-KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
-endif
-
-# arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
-CHECKFLAGS     += $(NOSTDINC_FLAGS)
-
-# warn about C99 declaration after statement
-KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
-
-# disable pointer signed / unsigned warnings in gcc 4.0
-KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
-
-# disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
-
-# conserve stack if available
-KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
-
-# use the deterministic mode of AR if available
-KBUILD_ARFLAGS := $(call ar-option,D)
-
-# check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
-	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
-endif
-
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-# But warn user when we do so
-warn-assign = \
-$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
-
-ifneq ($(KCPPFLAGS),)
-        $(call warn-assign,CPPFLAGS)
-        KBUILD_CPPFLAGS += $(KCPPFLAGS)
-endif
-ifneq ($(KAFLAGS),)
-        $(call warn-assign,AFLAGS)
-        KBUILD_AFLAGS += $(KAFLAGS)
-endif
-ifneq ($(KCFLAGS),)
-        $(call warn-assign,CFLAGS)
-        KBUILD_CFLAGS += $(KCFLAGS)
-endif
-
-# Use --build-id when available.
-LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
-			      $(call cc-ldoption, -Wl$(comma)--build-id,))
-KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
-LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
-
-ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
-LDFLAGS_vmlinux	+= $(call ld-option, -X,)
-endif
-
-# Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the command line or
-# set in the environment
-# Also any assignments in arch/$(ARCH)/Makefile take precedence over
-# this default value
-export KBUILD_IMAGE ?= vmlinux
-
-#
-# INSTALL_PATH specifies where to place the updated kernel and system map
-# images. Default is /boot, but you can set it to other values
-export	INSTALL_PATH ?= /boot
-
-#
-# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
-# relocations required by build roots.  This is not defined in the
-# makefile but the argument can be passed to make if needed.
-#
-
-MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
-export MODLIB
-
-#
-#  INSTALL_MOD_STRIP, if defined, will cause modules to be
-#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
-#  the default option --strip-debug will be used.  Otherwise,
-#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
-
-ifdef INSTALL_MOD_STRIP
-ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(STRIP) --strip-debug
-else
-mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
-endif # INSTALL_MOD_STRIP=1
-else
-mod_strip_cmd = true
-endif # INSTALL_MOD_STRIP
-export mod_strip_cmd
-
-
-ifeq ($(KBUILD_EXTMOD),)
-core-y		+= kernel/ mm/ fs/ ipc/ security/ crypto/ block/
-
-vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
-		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
-		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
-
-vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
-		     $(init-n) $(init-) \
-		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
-		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
-
-init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
-core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
-drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
-net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
-libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
-libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
-libs-y		:= $(libs-y1) $(libs-y2)
-
-# Build vmlinux
-# ---------------------------------------------------------------------------
-# vmlinux is built from the objects selected by $(vmlinux-init) and
-# $(vmlinux-main). Most are built-in.o files from top-level directories
-# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
-# Ordering when linking is important, and $(vmlinux-init) must be first.
-#
-# vmlinux
-#   ^
-#   |
-#   +-< $(vmlinux-init)
-#   |   +--< init/version.o + more
-#   |
-#   +--< $(vmlinux-main)
-#   |    +--< driver/built-in.o mm/built-in.o + more
-#   |
-#   +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
-#
-# vmlinux version (uname -v) cannot be updated during normal
-# descending-into-subdirs phase since we do not yet know if we need to
-# update vmlinux.
-# Therefore this step is delayed until just before final link of vmlinux -
-# except in the kallsyms case where it is done just before adding the
-# symbols to the kernel.
-#
-# System.map is generated to document addresses of all kernel symbols
-
-vmlinux-init := $(head-y) $(init-y)
-vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
-vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
-vmlinux-lds  := arch/$(SRCARCH)/kernel/vmlinux.lds
-export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
-
-# Rule to link vmlinux - also used during CONFIG_KALLSYMS
-# May be overridden by arch/$(ARCH)/Makefile
-quiet_cmd_vmlinux__ ?= LD      $@
-      cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-      -T $(vmlinux-lds) $(vmlinux-init)                          \
-      --start-group $(vmlinux-main) --end-group                  \
-      $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
-
-# Generate new vmlinux version
-quiet_cmd_vmlinux_version = GEN     .version
-      cmd_vmlinux_version = set -e;                     \
-	if [ ! -r .version ]; then			\
-	  rm -f .version;				\
-	  echo 1 >.version;				\
-	else						\
-	  mv .version .old_version;			\
-	  expr 0$$(cat .old_version) + 1 >.version;	\
-	fi;						\
-	$(MAKE) $(build)=init
-
-# Generate System.map
-quiet_cmd_sysmap = SYSMAP
-      cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
-
-# Link of vmlinux
-# If CONFIG_KALLSYMS is set .version is already updated
-# Generate System.map and verify that the content is consistent
-# Use + in front of the vmlinux_version rule to silent warning with make -j2
-# First command is ':' to allow us to use + in front of the rule
-define rule_vmlinux__
-	:
-	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
-
-	$(call cmd,vmlinux__)
-	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
-
-	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
-	  echo '  $($(quiet)cmd_sysmap)  System.map' &&)                     \
-	$(cmd_sysmap) $@ System.map;                                         \
-	if [ $$? -ne 0 ]; then                                               \
-		rm -f $@;                                                    \
-		/bin/false;                                                  \
-	fi;
-	$(verify_kallsyms)
-endef
-
-
-ifdef CONFIG_KALLSYMS
-# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
-# It's a three stage process:
-# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
-#   empty
-#   Running kallsyms on that gives us .tmp_kallsyms1.o with
-#   the right size - vmlinux version (uname -v) is updated during this step
-# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
-#   but due to the added section, some addresses have shifted.
-#   From here, we generate a correct .tmp_kallsyms2.o
-# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
-# o Verify that the System.map from vmlinux matches the map from
-#   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
-# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
-#   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
-#   temporary bypass to allow the kernel to be built while the
-#   maintainers work out what went wrong with kallsyms.
-
-last_kallsyms := 2
-
-ifdef KALLSYMS_EXTRA_PASS
-ifneq ($(KALLSYMS_EXTRA_PASS),0)
-last_kallsyms := 3
-endif
-endif
-
-kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-
-define verify_kallsyms
-	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
-	  echo '  $($(quiet)cmd_sysmap)  .tmp_System.map' &&)                \
-	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
-	$(Q)cmp -s System.map .tmp_System.map ||                             \
-		(echo Inconsistent kallsyms data;                            \
-		 echo This is a bug - please report about it;                \
-		 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
-		 rm .tmp_kallsyms* ; /bin/false )
-endef
-
-# Update vmlinux version before link
-# Use + in front of this rule to silent warning about make -j1
-# First command is ':' to allow us to use + in front of this rule
-cmd_ksym_ld = $(cmd_vmlinux__)
-define rule_ksym_ld
-	: 
-	+$(call cmd,vmlinux_version)
-	$(call cmd,vmlinux__)
-	$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
-endef
-
-# Generate .S file with all kernel symbols
-quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
-                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
-
-.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
-	$(call if_changed_dep,as_o_S)
-
-.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
-	$(call cmd,kallsyms)
-
-# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
-	$(call if_changed_rule,ksym_ld)
-
-.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
-	$(call if_changed,vmlinux__)
-
-.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
-	$(call if_changed,vmlinux__)
-
-# Needs to visit scripts/ before $(KALLSYMS) can be used.
-$(KALLSYMS): scripts ;
-
-# Generate some data for debugging strange kallsyms problems
-debug_kallsyms: .tmp_map$(last_kallsyms)
-
-.tmp_map%: .tmp_vmlinux% FORCE
-	($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
-
-.tmp_map3: .tmp_map2
-
-.tmp_map2: .tmp_map1
-
-endif # ifdef CONFIG_KALLSYMS
-
-# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
-# relevant sections renamed as per the linker script.
-quiet_cmd_vmlinux-modpost = LD      $@
-      cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@                          \
-	 $(vmlinux-init) --start-group $(vmlinux-main) --end-group             \
-	 $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
-define rule_vmlinux-modpost
-	:
-	+$(call cmd,vmlinux-modpost)
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
-	$(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
-endef
-
-# vmlinux image - including updated kernel symbols
-vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
-ifdef CONFIG_HEADERS_CHECK
-	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
-endif
-ifdef CONFIG_SAMPLES
-	$(Q)$(MAKE) $(build)=samples
-endif
-ifdef CONFIG_BUILD_DOCSRC
-	$(Q)$(MAKE) $(build)=Documentation
-endif
-	$(call vmlinux-modpost)
-	$(call if_changed_rule,vmlinux__)
-	$(Q)rm -f .old_version
-
-# build vmlinux.o first to catch section mismatch errors early
-ifdef CONFIG_KALLSYMS
-.tmp_vmlinux1: vmlinux.o
-endif
-
-modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
-vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
-	$(call if_changed_rule,vmlinux-modpost)
-
-# The actual objects are generated when descending, 
-# make sure no implicit rule kicks in
-$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
-
-# Handle descending into subdirectories listed in $(vmlinux-dirs)
-# Preset locale variables to speed up the build process. Limit locale
-# tweaks to this spot to avoid wrong language settings when running
-# make menuconfig etc.
-# Error messages still appears in the original language
-
-PHONY += $(vmlinux-dirs)
-$(vmlinux-dirs): prepare scripts
-	$(Q)$(MAKE) $(build)=$@
-
-# Store (new) KERNELRELASE string in include/config/kernel.release
-include/config/kernel.release: include/config/auto.conf FORCE
-	$(Q)rm -f $@
-	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
-
-
-# Things we need to do before we recursively start building the kernel
-# or the modules are listed in "prepare".
-# A multi level approach is used. prepareN is processed before prepareN-1.
-# archprepare is used in arch Makefiles and when processed asm symlink,
-# version.h and scripts_basic is processed / created.
-
-# Listed in dependency order
-PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
-
-# prepare3 is used to check if we are building in a separate output directory,
-# and if so do:
-# 1) Check that make has not been executed in the kernel src $(srctree)
-prepare3: include/config/kernel.release
-ifneq ($(KBUILD_SRC),)
-	@$(kecho) '  Using $(srctree) as source for kernel'
-	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
-		echo "  $(srctree) is not clean, please run 'make mrproper'";\
-		echo "  in the '$(srctree)' directory.";\
-		/bin/false; \
-	fi;
-endif
-
-# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile asm-generic
-
-prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
-                   include/config/auto.conf
-	$(cmd_crmodverdir)
-
-archprepare: archheaders archscripts prepare1 scripts_basic
-
-prepare0: archprepare FORCE
-	$(Q)$(MAKE) $(build)=.
-
-# All the preparing..
-prepare: prepare0
-
-# Generate some files
-# ---------------------------------------------------------------------------
-
-# KERNELRELEASE can change from a few different places, meaning version.h
-# needs to be updated, so this check is forced on all builds
-
-uts_len := 64
-define filechk_utsrelease.h
-	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
-	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
-	  exit 1;                                                         \
-	fi;                                                               \
-	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
-endef
-
-define filechk_version.h
-	(echo \#define LINUX_VERSION_CODE $(shell                             \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL));    \
-	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
-endef
-
-include/linux/version.h: $(srctree)/Makefile FORCE
-	$(call filechk,version.h)
-
-include/generated/utsrelease.h: include/config/kernel.release FORCE
-	$(call filechk,utsrelease.h)
-
-PHONY += headerdep
-headerdep:
-	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
-	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
-
-# ---------------------------------------------------------------------------
-
-PHONY += depend dep
-depend dep:
-	@echo '*** Warning: make $@ is unnecessary now.'
-
-# ---------------------------------------------------------------------------
-# Firmware install
-INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
-export INSTALL_FW_PATH
-
-PHONY += firmware_install
-firmware_install: FORCE
-	@mkdir -p $(objtree)/firmware
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
-
-# ---------------------------------------------------------------------------
-# Kernel headers
-
-#Default location for installed headers
-export INSTALL_HDR_PATH = $(objtree)/usr
-
-hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
-
-# If we do an all arch process set dst to asm-$(hdr-arch)
-hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
-
-PHONY += archheaders
-archheaders:
-
-PHONY += archscripts
-archscripts:
-
-PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE
-	$(Q)$(MAKE) $(build)=scripts build_unifdef
-
-PHONY += headers_install_all
-headers_install_all:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
-
-PHONY += headers_install
-headers_install: __headers
-	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
-	$(error Headers not exportable for the $(SRCARCH) architecture))
-	$(Q)$(MAKE) $(hdr-inst)=include
-	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
-
-PHONY += headers_check_all
-headers_check_all: headers_install_all
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
-
-PHONY += headers_check
-headers_check: headers_install
-	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
-	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
-
-# ---------------------------------------------------------------------------
-# Modules
-
-ifdef CONFIG_MODULES
-
-# By default, build modules as well
-
-all: modules
-
-#	Build modules
-#
-#	A module can be listed more than once in obj-m resulting in
-#	duplicate lines in modules.order files.  Those are removed
-#	using awk while concatenating to the final file.
-
-PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
-	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
-	@$(kecho) '  Building modules, stage 2.';
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
-
-modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
-	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
-
-%/modules.builtin: include/config/auto.conf
-	$(Q)$(MAKE) $(modbuiltin)=$*
-
-
-# Target to prepare building external modules
-PHONY += modules_prepare
-modules_prepare: prepare scripts
-
-# Target to install modules
-PHONY += modules_install
-modules_install: _modinst_ _modinst_post
-
-PHONY += _modinst_
-_modinst_:
-	@rm -rf $(MODLIB)/kernel
-	@rm -f $(MODLIB)/source
-	@mkdir -p $(MODLIB)/kernel
-	@ln -s $(srctree) $(MODLIB)/source
-	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
-		rm -f $(MODLIB)/build ; \
-		ln -s $(objtree) $(MODLIB)/build ; \
-	fi
-	@cp -f $(objtree)/modules.order $(MODLIB)/
-	@cp -f $(objtree)/modules.builtin $(MODLIB)/
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-
-# This depmod is only for convenience to give the initial
-# boot a modules.dep even before / is mounted read-write.  However the
-# boot script depmod is the master version.
-PHONY += _modinst_post
-_modinst_post: _modinst_
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
-	$(call cmd,depmod)
-
-else # CONFIG_MODULES
-
-# Modules not configured
-# ---------------------------------------------------------------------------
-
-modules modules_install: FORCE
-	@echo
-	@echo "The present kernel configuration has modules disabled."
-	@echo "Type 'make config' and enable loadable module support."
-	@echo "Then build a kernel with module support enabled."
-	@echo
-	@exit 1
-
-endif # CONFIG_MODULES
-
-###
-# Cleaning is done on three levels.
-# make clean     Delete most generated files
-#                Leave enough to build external modules
-# make mrproper  Delete the current configuration, and all generated files
-# make distclean Remove editor backup files, patch leftover files and the like
-
-# Directories & files removed with 'make clean'
-CLEAN_DIRS  += $(MODVERDIR)
-CLEAN_FILES +=	vmlinux System.map \
-                .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
-
-# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config usr/include include/generated          \
-                  arch/*/include/generated
-MRPROPER_FILES += .config .config.old .version .old_version             \
-                  include/linux/version.h                               \
-		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
-
-# clean - Delete most, but leave enough to build external modules
-#
-clean: rm-dirs  := $(CLEAN_DIRS)
-clean: rm-files := $(CLEAN_FILES)
-clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
-
-PHONY += $(clean-dirs) clean archclean
-$(clean-dirs):
-	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
-
-clean: archclean
-
-# mrproper - Delete all generated files, including .config
-#
-mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
-mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
-mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
-
-PHONY += $(mrproper-dirs) mrproper archmrproper
-$(mrproper-dirs):
-	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
-
-mrproper: clean archmrproper $(mrproper-dirs)
-	$(call cmd,rmdirs)
-	$(call cmd,rmfiles)
-
-# distclean
-#
-PHONY += distclean
-
-distclean: mrproper
-	@find $(srctree) $(RCS_FIND_IGNORE) \
-		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-		-o -name '.*.rej' \
-		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-		-type f -print | xargs rm -f
-
-
-# Packaging of the kernel to various formats
-# ---------------------------------------------------------------------------
-# rpm target kept for backward compatibility
-package-dir	:= $(srctree)/scripts/package
-
-%src-pkg: FORCE
-	$(Q)$(MAKE) $(build)=$(package-dir) $@
-%pkg: include/config/kernel.release FORCE
-	$(Q)$(MAKE) $(build)=$(package-dir) $@
-rpm: include/config/kernel.release FORCE
-	$(Q)$(MAKE) $(build)=$(package-dir) $@
-
-
-# Brief documentation of the typical targets used
-# ---------------------------------------------------------------------------
-
-boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
-boards := $(notdir $(boards))
-board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
-board-dirs := $(sort $(notdir $(board-dirs:/=)))
-
-help:
-	@echo  'Cleaning targets:'
-	@echo  '  clean		  - Remove most generated files but keep the config and'
-	@echo  '                    enough build support to build external modules'
-	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
-	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
-	@echo  ''
-	@echo  'Configuration targets:'
-	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
-	@echo  ''
-	@echo  'Other generic targets:'
-	@echo  '  all		  - Build all targets marked with [*]'
-	@echo  '* vmlinux	  - Build the bare kernel'
-	@echo  '* modules	  - Build all modules'
-	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
-	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
-	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
-	@echo  '  dir/            - Build all files in dir and below'
-	@echo  '  dir/file.[oisS] - Build specified target only'
-	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
-	@echo  '                    (requires a recent binutils and recent build (System.map))'
-	@echo  '  dir/file.ko     - Build module including final link'
-	@echo  '  modules_prepare - Set up for building external modules'
-	@echo  '  tags/TAGS	  - Generate tags file for editors'
-	@echo  '  cscope	  - Generate cscope index'
-	@echo  '  gtags           - Generate GNU GLOBAL index'
-	@echo  '  kernelrelease	  - Output the release version string'
-	@echo  '  kernelversion	  - Output the version stored in Makefile'
-	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
-	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
-	 echo  ''
-	@echo  'Static analysers'
-	@echo  '  checkstack      - Generate a list of stack hogs'
-	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
-	@echo  '  versioncheck    - Sanity check on version.h usage'
-	@echo  '  includecheck    - Check for duplicate included header files'
-	@echo  '  export_report   - List the usages of all exported symbols'
-	@echo  '  headers_check   - Sanity check on exported headers'
-	@echo  '  headerdep       - Detect inclusion cycles in headers'
-	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
-	@echo  ''
-	@echo  'Kernel packaging:'
-	@$(MAKE) $(build)=$(package-dir) help
-	@echo  ''
-	@echo  'Documentation targets:'
-	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
-	@echo  ''
-	@echo  'Architecture specific targets ($(SRCARCH)):'
-	@$(if $(archhelp),$(archhelp),\
-		echo '  No architecture specific help defined for $(SRCARCH)')
-	@echo  ''
-	@$(if $(boards), \
-		$(foreach b, $(boards), \
-		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
-		echo '')
-	@$(if $(board-dirs), \
-		$(foreach b, $(board-dirs), \
-		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
-		printf "  %-16s - Show all of the above\\n" help-boards; \
-		echo '')
-
-	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
-	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
-	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
-	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
-	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
-	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
-	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
-	@echo  '		1: warnings which may be relevant and do not occur too often'
-	@echo  '		2: warnings which occur quite often but may still be relevant'
-	@echo  '		3: more obscure warnings, can most likely be ignored'
-	@echo  '		Multiple levels can be combined with W=12 or W=123'
-	@echo  ''
-	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
-	@echo  'For further info see the ./README file'
-
-
-help-board-dirs := $(addprefix help-,$(board-dirs))
-
-help-boards: $(help-board-dirs)
-
-boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
-
-$(help-board-dirs): help-%:
-	@echo  'Architecture specific targets ($(SRCARCH) $*):'
-	@$(if $(boards-per-dir), \
-		$(foreach b, $(boards-per-dir), \
-		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
-		echo '')
-
-
-# Documentation targets
-# ---------------------------------------------------------------------------
-%docs: scripts_basic FORCE
-	$(Q)$(MAKE) $(build)=scripts build_docproc
-	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
-
-else # KBUILD_EXTMOD
-
-###
-# External module support.
-# When building external modules the kernel used as basis is considered
-# read-only, and no consistency checks are made and the make
-# system is not used on the basis kernel. If updates are required
-# in the basis kernel ordinary make commands (without M=...) must
-# be used.
-#
-# The following are the only valid targets when building external
-# modules.
-# make M=dir clean     Delete all automatically generated files
-# make M=dir modules   Make all modules in specified dir
-# make M=dir	       Same as 'make M=dir modules'
-# make M=dir modules_install
-#                      Install the modules built in the module directory
-#                      Assumes install directory is already created
-
-# We are always building modules
-KBUILD_MODULES := 1
-PHONY += crmodverdir
-crmodverdir:
-	$(cmd_crmodverdir)
-
-PHONY += $(objtree)/Module.symvers
-$(objtree)/Module.symvers:
-	@test -e $(objtree)/Module.symvers || ( \
-	echo; \
-	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
-	echo "           is missing; modules will have no dependencies and modversions."; \
-	echo )
-
-module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-PHONY += $(module-dirs) modules
-$(module-dirs): crmodverdir $(objtree)/Module.symvers
-	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
-
-modules: $(module-dirs)
-	@$(kecho) '  Building modules, stage 2.';
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-PHONY += modules_install
-modules_install: _emodinst_ _emodinst_post
-
-install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
-PHONY += _emodinst_
-_emodinst_:
-	$(Q)mkdir -p $(MODLIB)/$(install-dir)
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-
-PHONY += _emodinst_post
-_emodinst_post: _emodinst_
-	$(call cmd,depmod)
-
-clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
-
-PHONY += $(clean-dirs) clean
-$(clean-dirs):
-	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
-
-clean:	rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
-
-help:
-	@echo  '  Building external modules.'
-	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
-	@echo  ''
-	@echo  '  modules         - default target, build the module(s)'
-	@echo  '  modules_install - install the module'
-	@echo  '  clean           - remove generated files in module directory only'
-	@echo  ''
-
-# Dummies...
-PHONY += prepare scripts
-prepare: ;
-scripts: ;
-endif # KBUILD_EXTMOD
-
-clean: $(clean-dirs)
-	$(call cmd,rmdirs)
-	$(call cmd,rmfiles)
-	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
-		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-		-o -name '*.symtypes' -o -name 'modules.order' \
-		-o -name modules.builtin -o -name '.tmp_*.o.*' \
-		-o -name '*.gcno' \) -type f -print | xargs rm -f
-
-# Generate tags for editors
-# ---------------------------------------------------------------------------
-quiet_cmd_tags = GEN     $@
-      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
-
-tags TAGS cscope gtags: FORCE
-	$(call cmd,tags)
-
-# Scripts to check various things for consistency
-# ---------------------------------------------------------------------------
-
-PHONY += includecheck versioncheck coccicheck namespacecheck export_report
-
-includecheck:
-	find $(srctree)/* $(RCS_FIND_IGNORE) \
-		-name '*.[hcS]' -type f -print | sort \
-		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
-
-versioncheck:
-	find $(srctree)/* $(RCS_FIND_IGNORE) \
-		-name '*.[hcS]' -type f -print | sort \
-		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
-
-coccicheck:
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
-
-namespacecheck:
-	$(PERL) $(srctree)/scripts/namespace.pl
-
-export_report:
-	$(PERL) $(srctree)/scripts/export_report.pl
-
-endif #ifeq ($(config-targets),1)
-endif #ifeq ($(mixed-targets),1)
-
-PHONY += checkstack kernelrelease kernelversion
-
-# UML needs a little special treatment here.  It wants to use the host
-# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
-# else wants $(ARCH), including people doing cross-builds, which means
-# that $(SUBARCH) doesn't work here.
-ifeq ($(ARCH), um)
-CHECKSTACK_ARCH := $(SUBARCH)
-else
-CHECKSTACK_ARCH := $(ARCH)
-endif
-checkstack:
-	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
-	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
-
-kernelrelease:
-	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
-
-kernelversion:
-	@echo $(KERNELVERSION)
-
-# Single targets
-# ---------------------------------------------------------------------------
-# Single targets are compatible with:
-# - build with mixed source and output
-# - build with separate output dir 'make O=...'
-# - external modules
-#
-#  target-dir => where to store outputfile
-#  build-dir  => directory in kernel source tree to use
-
-ifeq ($(KBUILD_EXTMOD),)
-        build-dir  = $(patsubst %/,%,$(dir $@))
-        target-dir = $(dir $@)
-else
-        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
-        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
-        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
-endif
-
-%.s: %.c prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.i: %.c prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.o: %.c prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.lst: %.c prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.s: %.S prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.o: %.S prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-%.symtypes: %.c prepare scripts FORCE
-	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
-
-# Modules
-/: prepare scripts FORCE
-	$(cmd_crmodverdir)
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
-	$(build)=$(build-dir)
-%/: prepare scripts FORCE
-	$(cmd_crmodverdir)
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
-	$(build)=$(build-dir)
-%.ko: prepare scripts FORCE
-	$(cmd_crmodverdir)
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
-	$(build)=$(build-dir) $(@:.ko=.o)
-	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-# FIXME Should go into a make.lib or something 
-# ===========================================================================
-
-quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
-      cmd_rmdirs = rm -rf $(rm-dirs)
-
-quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
-      cmd_rmfiles = rm -f $(rm-files)
-
-# Run depmod only if we have System.map and depmod is executable
-quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
-      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
-                   $(KERNELRELEASE)
-
-# Create temporary dir for module support files
-# clean it up only when building all modules
-cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
-                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
-
-a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
-	  $(KBUILD_AFLAGS_KERNEL)                              \
-	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
-	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
-
-quiet_cmd_as_o_S = AS      $@
-cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
-
-# read all saved command lines
-
-targets := $(wildcard $(sort $(targets)))
-cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
-
-ifneq ($(cmd_files),)
-  $(cmd_files): ;	# Do not try to update included dependency files
-  include $(cmd_files)
-endif
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
-
-endif	# skip-makefile
-
-PHONY += FORCE
-FORCE:
-
-# Declare the contents of the .PHONY variable as phony.  We keep that
-# information in a variable so we can use it in if_changed and friends.
-.PHONY: $(PHONY)
-
-ubin: uImage
-	@cp -f arch/arm/boot/uImage uzImage.bin
-	@echo '  Image uzImage.bin is ready'