fminimax

Parameters

fun:: The function to be minimized. fun is a function that accepts a vector x and returns a vector F, the objective functions evaluated at x.
x0:: a nx1 or 1xn matrix of doubles, where n is the number of variables, the initial guess for the optimization algorithm
A:: a nil x n matrix of doubles, where n is the number of variables and nil is the number of linear inequalities. If A==[] and b==[], it is assumed that there is no linear inequality constraints. If (A==[] & b<>[]), fminimax generates an error (the same happens if (A<>[] & b==[]))
b:: a nil x 1 matrix of doubles, where nil is the number of linear inequalities
Aeq:: a nel x n matrix of doubles, where n is the number of variables and nel is the number of linear equalities. If Aeq==[] and beq==[], it is assumed that there is no linear equality constraints. If (Aeq==[] & beq<>[]), fminimax generates an error (the same happens if (Aeq<>[] & beq==[]))
beq:: a nel x 1 matrix of doubles, where nel is the number of linear equalities
lb:: a nx1 or 1xn matrix of doubles, where n is the number of variables. The lower bound for x. If lb==[], then the lower bound is automatically set to -inf
ub:: a nx1 or 1xn matrix of doubles, where n is the number of variables. The upper bound for x. If ub==[], then the upper bound is automatically set to +inf
nonlinfun:: function that computes the nonlinear inequality constraints c(x) <= 0 and nonlinear equality constraints ceq(x) = 0.
x:: a nx1 matrix of doubles, the computed solution of the optimization problem
fval:: a vector of doubles, the value of fun at x
maxfval:: a 1x1 matrix of doubles, the maximum value in vector fval
exitflag:: a 1x1 matrix of floating point integers, the exit status
output:: a struct, the details of the optimization process
lambda:: a struct, the Lagrange multipliers at optimum
options:: a list, containing the option for user to specify. See below for details.

Description

fminimax minimizes the worst-case (largest) value of a set of multivariable functions, starting at an initial estimate. This is generally referred to as the minimax problem.

Currently, fminimax calls fmincon which uses the ip-opt algorithm.

max-min problems can also be solved with fminimax, using the identity

The options allows the user to set various parameters of the Optimization problem. It should be defined as type "list" and contains the following fields.

Syntax : options= list("MaxIter", [---], "CpuTime", [---], "GradObj", ---, "GradCon", ---);
MaxIter : a Scalar, containing the Maximum Number of Iteration that the solver should take.
CpuTime : a Scalar, containing the Maximum amount of CPU Time that the solver should take.
GradObj : a function, representing the gradient function of the Objective in Vector Form.
GradCon : a function, representing the gradient of the Non-Linear Constraints (both Equality and Inequality) of the problem. It is declared in such a way that gradient of non-linear inequality constraints are defined first as a separate Matrix (cg of size m2 X n or as an empty), followed by gradient of non-linear equality constraints as a separate Matrix (ceqg of size m2 X n or as an empty) where m2 & m3 are number of non-linear inequality and equality constraints respectively.
Default Values : options = list("MaxIter", [3000], "CpuTime", [600]);

The objective function must have header :

F = fun(x)

where x is a n x 1 matrix of doubles and F is a m x 1 matrix of doubles where m is the total number of objective functions inside F. On input, the variable x contains the current point and, on output, the variable F must contain the objective function values.

By default, the gradient options for fminimax are turned off and and fmincon does the gradient opproximation of minmaxObjfun. In case the GradObj option is off and GradConstr option is on, fminimax approximates minmaxObjfun gradient using numderivative toolbox.

If we can provide exact gradients, we should do so since it improves the convergence speed of the optimization algorithm.

Furthermore, we must enable the "GradObj" option with the statement :

minimaxOptions = list("GradObj",fGrad);

This will let fminimax know that the exact gradient of the objective function is known, so that it can change the calling sequence to the objective function. Note that, fGrad should be mentioned in the form of N x n where n is the number of variables, N is the number of functions in objective function.

The constraint function must have header :

[c, ceq] = confun(x)

where x is a n x 1 matrix of dominmaxUbles, c is a 1 x nni matrix of doubles and ceq is a 1 x nne matrix of doubles (nni : number of nonlinear inequality constraints, nne : number of nonlinear equality constraints). On input, the variable x contains the current point and, on output, the variable c must contain the nonlinear inequality constraints and ceq must contain the nonlinear equality constraints.

By default, the gradient options for fminimax are turned off and and fmincon does the gradient opproximation of confun. In case the GradObj option is on and GradCons option is off, fminimax approximates confun gradient using numderivative toolbox.

If we can provide exact gradients, we should do so since it improves the convergence speed of the optimization algorithm.

Furthermore, we must enable the "GradCon" option with the statement :

minimaxOptions = list("GradCon",confunGrad);

This will let fminimax know that the exact gradient of the objective function is known, so that it can change the calling sequence to the objective function.

The constraint derivative function must have header :

[dc,dceq] = confungrad(x)

where dc is a nni x n matrix of doubles and dceq is a nne x n matrix of doubles.

The exitflag allows to know the status of the optimization which is given back by Ipopt.

exitflag=0 : Optimal Solution Found
exitflag=1 : Maximum Number of Iterations Exceeded. Output may not be optimal.
exitflag=2 : Maximum amount of CPU Time exceeded. Output may not be optimal.
exitflag=3 : Stop at Tiny Step.
exitflag=4 : Solved To Acceptable Level.
exitflag=5 : Converged to a point of local infeasibility.

For more details on exitflag see the ipopt documentation, go to http://www.coin-or.org/Ipopt/documentation/

The output data structure contains detailed informations about the optimization process. It has type "struct" and contains the following fields.

output.Iterations: The number of iterations performed during the search
output.Cpu_Time: The total cpu-time spend during the search
output.Objective_Evaluation: The number of Objective Evaluations performed during the search
output.Dual_Infeasibility: The Dual Infeasiblity of the final soution

The lambda data structure contains the Lagrange multipliers at the end of optimization. In the current version the values are returned only when the the solution is optimal. It has type "struct" and contains the following fields.

lambda.lower: The Lagrange multipliers for the lower bound constraints.
lambda.upper: The Lagrange multipliers for the upper bound constraints.
lambda.eqlin: The Lagrange multipliers for the linear equality constraints.
lambda.ineqlin: The Lagrange multipliers for the linear inequality constraints.
lambda.eqnonlin: The Lagrange multipliers for the non-linear equality constraints.
lambda.ineqnonlin: The Lagrange multipliers for the non-linear inequality constraints.

Examples

// A basic case :
// we provide only the objective function and the nonlinear constraint
// function
function f=myfun(x)
f(1)= 2*x(1)^2 + x(2)^2 - 48*x(1) - 40*x(2) + 304;     //Objectives
f(2)= -x(1)^2 - 3*x(2)^2;
f(3)= x(1) + 3*x(2) -18;
f(4)= -x(1) - x(2);
f(5)= x(1) + x(2) - 8;
endfunction
// The initial guess
x0 = [0.1,0.1];
// The expected solution : only 4 digits are guaranteed
//xopt = [4 4]
//fopt = [0 -64 -2 -8 0]
maxfopt = 0
// Run fminimax
[xopt,fopt,maxfval,exitflag,output,lambda] = fminimax(myfun, x0)
// Press ENTER to continue

Examples

// A case where we provide the gradient of the objective
// functions and the Jacobian matrix of the constraints.
// The objective function and its gradient
function f=myfun(x)
f(1)= 2*x(1)^2 + x(2)^2 - 48*x(1) - 40*x(2) + 304;
f(2)= -x(1)^2 - 3*x(2)^2;
f(3)= x(1) + 3*x(2) -18;
f(4)= -x(1) - x(2);
f(5)= x(1) + x(2) - 8;
endfunction
// Defining gradient of myfun
function G=myfungrad(x)
G = [ 4*x(1) - 48, -2*x(1), 1, -1, 1;
2*x(2) - 40, -6*x(2), 3, -1, 1; ]'
endfunction
// The nonlinear constraints and the Jacobian
// matrix of the constraints
function [c, ceq]=confun(x)
// Inequality constraints
c = [1.5 + x(1)*x(2) - x(1) - x(2), -x(1)*x(2) - 10]
// No nonlinear equality constraints
ceq=[]
endfunction
// Defining gradient of confungrad
function [DC, DCeq]=cgrad(x)
// DC(:,i) = gradient of the i-th constraint
// DC = [
//   Dc1/Dx1  Dc1/Dx2
//   Dc2/Dx1  Dc2/Dx2
//   ]
DC= [
x(2)-1, -x(2)
x(1)-1, -x(1)
]'
DCeq = []'
endfunction
// Test with both gradient of objective and gradient of constraints
minimaxOptions = list("GradObj",myfungrad,"GradCon",cgrad);
// The initial guess
x0 = [0,10];
// The expected solution : only 4 digits are guaranteed
//xopt = [0.92791 7.93551]
//fopt = [6.73443  -189.778  6.73443  -8.86342  0.86342]
maxfopt = 6.73443
// Run fminimax
[xopt,fopt,maxfval,exitflag,output] = fminimax(myfun,x0,[],[],[],[],[],[], confun, minimaxOptions)

Authors

Animesh Baranawal

Report an issue
<< fmincon	Symphony Toolbox	fminunc >>

fminimax

Calling Sequence

Parameters

Description

Examples

Examples

Authors