1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
module ArduinoTools
using SerialPorts
function connectBoard(baudrate::Int64) # Automatically detects SerialPort and opens it
arr = list_serialports() # with given baudrate
port = arr[1]
ser = SerialPort(port,baudrate) # Caution: works in most cases... If doesn't,
sleep(2) # Use the openSerial() function
return ser
end
function openSerial(port::ASCIIString, baudrate::Int64) # starts serial communication
ser = SerialPorts.SerialPort(port,baudrate)
sleep(2)
return ser
end
function closeSerial(ser::SerialPorts.SerialPort) # closes serial port
SerialPorts.close(ser)
end
function Write(ser::SerialPorts.SerialPort, str::ASCIIString) # writes a string to connected serial device
SerialPorts.write(ser,str)
end
function Write(ser::SerialPorts.SerialPort, str::UTF8String) # writes a string to connected serial device
SerialPorts.write(ser,str)
end
function Read(ser::SerialPorts.SerialPort, bytes::Int64) # reads 'bytes' number of bytes from serial port
SerialPorts.read(ser,bytes)
end
function ReadAvailable(ser::SerialPorts.SerialPort) # reads all available bytes from serial port
SerialPorts.readavailable(ser)
end
function nbAvailable(ser::SerialPorts.SerialPort) # returns number of bytes available for reading
SerialPorts.nb_available(ser)
end
function listSerialPorts() # returns array of serial port names on computer
SerialPorts.list_serialports()
end
function pinMode(file_des::SerialPorts.SerialPort , pin_no::Int64 , mode::ASCIIString)
m = uppercase(mode) # Prevent errors due to case differences
if m == "INPUT" str = "Da"*string(Char(48+pin_no))*"0" end # Dan0 for INPUT
if m == "OUTPUT" str = "Da"*string(Char(48+pin_no))*"1" end # Dan1 for OUTPUT
str = ascii(str) # Converts UTF8String to ASCIIString
write(file_des,str)
end
function digiWrite(file_des::SerialPorts.SerialPort , pin_no::Int64 , val::Int64)
if val > 0 str = "Dw"*string(Char(48+pin_no))*"1" end # Dwn1 for HIGH
if val == 0 str = "Dw"*string(Char(48+pin_no))*"0" end # Dwn0 for LOW
str = ascii(str) # Converts UTF8String to ASCIIString
write(file_des,str)
end
function digiRead(file_des::SerialPorts.SerialPort , pin_no::Int64)
str = "Dr"*string(Char(48+pin_no)) # Drn to read digital pin n
str = ascii(str) # Convert UTF8String to ASCIIString
write(file_des,str)
sleep(0.01) # Delay the next step by 10 milliseconds
c = read(file_des,1) # Read one byte from SerialPort
n = parse(Int,c) # Convert the received string into integer
return n # Return the integer
end
function analogWrite(file_des::SerialPorts.SerialPort , pin_no::Int64 , val::Int64)
if val > 255 val = 255 end # Make sure val isn't beyond limits
if val < 0 val = 0 end
c = Char(val) # Conversion of val into character
d = string(c) # Converting character to string
s = "W"*string(Char(48+pin_no))*d # Wnm for analog value m on pin n
write(file_des,s)
end
function analogRead(file_des::SerialPorts.SerialPort , pin_no::Int64)
str = "A"*string(Char(48+pin_no)) #"An" for analog value on pin n
write(file_des,str)
sleep(0.1) # Delay next step by 100 milliseconds
n = nb_available(file_des) # Get number of bytes in input buffer
s = read(file_des,n) # Read n bytes from SerialPort
k = parse(Int,s) # Convert String to integer
return k # Return the integer
end
function DCMotorSetup(file_des::SerialPorts.SerialPort, driver_type::Int64, motor_no::Int64, pin1::Int64, pin2::Int64)
println("Initializing motor")
if (driver_type == 1) # adafruit
code_sent = "C"*string(motor_no)*string(Char(48+pin1))*string(Char(48+pin2))*"1"
elseif (driver_type == 2) # L298
code_sent = "C"*string(motor_no)*string(Char(48+pin1))*string(Char(48+pin2))*"1"
elseif (driver_type == 3) # L293
code_sent = "C"*string(motor_no)*string(Char(48+pin1))*string(Char(48+pin2))*"0"
end
write(file_des,code_sent)
sleep(0.1) # sleep for a tenth of a second
s = readavailable(file_des) # read all available bytes from input buffer
if s == "OK"
println("Motor Setup Successful")
else
println("Motor Setup unsuccessful")
end
end # end function
function DCMotorRun(file_des::SerialPorts.SerialPort, motor_no::Int64, speed::Int64)
sgn = sign(speed) # Checking sign of speed to set direction
if sgn >= 0
direction = "1"
else
direction = "0"
end
speed = abs(speed) # Dropping the sign
if speed > 255 speed = 255 end # Make sure speed is not beyond limit
code_sent = "M"*string(motor_no)*direction*string(Char(speed))
write(file_des,code_sent)
end # end function
function DCMotorRelease(file_des::SerialPorts.SerialPort, motor_no::Int64)
code_sent = "M"*string(motor_no)*"1"string(Char(0))
write(file_des,code_sent) # Stops the motor first
sleep(0.1) # Delay of 0.1 second
code_sent = "M"*string(motor_no)*"r"
write(file_des,code_sent) # Releases the motor
end
function ServoAttach(file_des::SerialPorts.SerialPort, servo_no::Int64)
println("Initializing servo")
if servo_no == 1
pin = "Sa1"
write(file_des,pin)
elseif servo_no == 2
pin = "Sa2"
write(file_des,pin)
else
println("Error")
end
end
function ServoMove(file_des::SerialPorts.SerialPort, servo_no::Int64, val::Int64)
if val < 0 val = 0 end
if val >180 val = 180 end
pin = "Sw"*string(servo_no)*string(Char(val))
write(file_des,pin)
end
function ServoDetach(file_des::SerialPorts.SerialPort, servo_no::Int64)
if servo_no == 1
pin = "Sa1"
write(file_des,pin)
elseif servo_no == 2
pin = "Sa2"
write(file_des,pin)
else
println("Error")
end
end
function MPUReadin(file_des::SerialPorts.SerialPort)
cmd = "F"
write(file_des,cmd)
analog_times = []
sleep(0.03)
s = readavailable(file_des)
sarr = split(s,"/")
for i in 1:length(sarr)
push!(analog_times,parse(Int,sarr[i]))
end
return analog_times
end
export connectBoard,openSerial,closeSerial,Write,Read,ReadAvailable,nbAvailable,listSerialPorts,pinMode,digiWrite,digiRead,analogWrite,analogRead,DCMotorSetup,DCMotorRun,DCMotorRelease,ServoAttach,ServoMove,ServoDetach,MPUReadin
end # module
|
