Add RGB LED breadboard

15 files changed, 658 insertions, 1588 deletions

diff --git a/floss-arduino.ard b/floss-arduino.ard
index 2d2b4aa..37eea50 100644
--- a/floss-arduino.ard
+++ b/floss-arduino.ard
@@ -1,7 +1,7 @@
 \contentsline {section}{\numberline {3.{1}}First 10 lines of the Arduino firmware}{25}%
 \addvspace {10pt}
 \contentsline {section}{\numberline {4.{1}}Turning on the blue LED}{60}%
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{61}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{60}%
 \contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{61}%
 \contentsline {section}{\numberline {4.{4}}Blinking the green LED}{61}%
 \addvspace {10pt}
diff --git a/floss-arduino.aux b/floss-arduino.aux
index 6b7e1b4..8933dcb 100644
--- a/floss-arduino.aux
+++ b/floss-arduino.aux
@@ -291,12 +291,12 @@
 \newlabel{15@vr}{{}{60}}
 \newlabel{ard:led-blue}{{4.{1}}{60}}
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue/led\textendash blue.ino}{60}\protected@file@percent }
-\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{61}\protected@file@percent }
-\@writefile{ard}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{61}\protected@file@percent }
-\newlabel{16@xvr}{{}{61}}
-\newlabel{16@vr}{{}{61}}
-\newlabel{ard:led-blue-delay}{{4.{2}}{61}}
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{61}\protected@file@percent }
+\@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{60}\protected@file@percent }
+\@writefile{ard}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{60}\protected@file@percent }
+\newlabel{16@xvr}{{}{60}}
+\newlabel{16@vr}{{}{60}}
+\newlabel{ard:led-blue-delay}{{4.{2}}{60}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blue\textendash delay/led\textendash blue\textendash delay.ino}{60}\protected@file@percent }
 \@writefile{thm}{\contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{61}\protected@file@percent }
 \@writefile{ard}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{61}\protected@file@percent }
 \newlabel{17@xvr}{{}{61}}
@@ -309,12 +309,12 @@
 \newlabel{18@vr}{{}{61}}
 \newlabel{ard:led-blink}{{4.{4}}{61}}
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led\textendash blink/led\textendash blink.ino}{61}\protected@file@percent }
-\@writefile{toc}{\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{62}\protected@file@percent }
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{62}\protected@file@percent }
-\newlabel{sec:light-sci}{{4.4.1}{62}}
+\@writefile{toc}{\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{61}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{61}\protected@file@percent }
+\newlabel{sec:light-sci}{{4.4.1}{61}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{62}\protected@file@percent }
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{62}\protected@file@percent }
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{62}\protected@file@percent }
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{63}\protected@file@percent }
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{63}\protected@file@percent }
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{63}\protected@file@percent }
 \@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{2}}{}}{63}\protected@file@percent }
@@ -327,12 +327,12 @@
 \newlabel{19@vr}{{}{63}}
 \newlabel{sci:led-blue}{{4.{1}}{63}}
 \@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue.sce}{63}\protected@file@percent }
-\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{64}\protected@file@percent }
-\@writefile{cod}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{64}\protected@file@percent }
-\newlabel{20@xvr}{{}{64}}
-\newlabel{20@vr}{{}{64}}
-\newlabel{sci:led-blue-delay}{{4.{2}}{64}}
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{64}\protected@file@percent }
+\@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{63}\protected@file@percent }
+\@writefile{cod}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{63}\protected@file@percent }
+\newlabel{20@xvr}{{}{63}}
+\newlabel{20@vr}{{}{63}}
+\newlabel{sci:led-blue-delay}{{4.{2}}{63}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led\textendash blue\textendash delay.sce}{63}\protected@file@percent }
 \@writefile{thm}{\contentsline {codemass}{{Scilab Code}{4.{3}}{}}{64}\protected@file@percent }
 \@writefile{cod}{\contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{64}\protected@file@percent }
 \newlabel{21@xvr}{{}{64}}
@@ -368,6 +368,9 @@
 \newlabel{30@vr}{{}{67}}
 \newlabel{fig:led-blue-red}{{4.8}{67}}
 \@writefile{thm}{\contentsline {egmass}{{Exercise}{4.{3}}{}}{67}\protected@file@percent }
+\@writefile{toc}{\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{67}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{67}\protected@file@percent }
+\newlabel{sec:light-py}{{4.6.1}{67}}
 \@writefile{lot}{\contentsline {table}{\numberline {4.3}{\ignorespaces Parameters to turn the blue and red LEDs on and then turn them off one by one\relax }}{68}\protected@file@percent }
 \newlabel{tab:led-blue-red}{{4.3}{68}}
 \newlabel{31@xvr}{{}{68}}
@@ -380,18 +383,15 @@
 \newlabel{tab:led-green-blink}{{4.4}{69}}
 \newlabel{34@xvr}{{}{69}}
 \newlabel{34@vr}{{}{69}}
-\@writefile{toc}{\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{69}\protected@file@percent }
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{69}\protected@file@percent }
-\newlabel{sec:light-py}{{4.6.1}{69}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.2}Python Code}{72}\protected@file@percent }
-\newlabel{sec:led-python-code}{{4.6.2}{72}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.6.2}Python Code}{71}\protected@file@percent }
+\newlabel{sec:led-python-code}{{4.6.2}{71}}
 \@writefile{pyd}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{1}}{}}{72}\protected@file@percent }
-\@writefile{pyd}{\contentsline {section}{\numberline {4.{1}}Turning on the LED through Python}{72}\protected@file@percent }
-\newlabel{35@xvr}{{}{72}}
-\newlabel{35@vr}{{}{72}}
-\newlabel{py:led-blue1}{{4.{1}}{72}}
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{72}\protected@file@percent }
+\@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{1}}{}}{71}\protected@file@percent }
+\@writefile{pyd}{\contentsline {section}{\numberline {4.{1}}Turning on the LED through Python}{71}\protected@file@percent }
+\newlabel{35@xvr}{{}{71}}
+\newlabel{35@vr}{{}{71}}
+\newlabel{py:led-blue1}{{4.{1}}{71}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led\textendash blue.py}{71}\protected@file@percent }
 \@writefile{thm}{\contentsline {pymass}{{Python Code}{4.{2}}{}}{72}\protected@file@percent }
 \@writefile{pyd}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}\protected@file@percent }
 \newlabel{36@xvr}{{}{72}}
@@ -413,15 +413,15 @@
 \@writefile{toc}{\contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{75}\protected@file@percent }
 \@writefile{toc}{\contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{75}\protected@file@percent }
 \newlabel{sec:light-julia}{{4.7.1}{75}}
-\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.2}Julia Code}{77}\protected@file@percent }
-\newlabel{sec:led-julia-code}{{4.7.2}{77}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {4.7.2}Julia Code}{76}\protected@file@percent }
+\newlabel{sec:led-julia-code}{{4.7.2}{76}}
 \@writefile{juliad}{\addvspace {10pt}}
-\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{77}\protected@file@percent }
-\@writefile{juliad}{\contentsline {section}{\numberline {4.{1}}Turning on the LED}{77}\protected@file@percent }
-\newlabel{39@xvr}{{}{77}}
-\newlabel{39@vr}{{}{77}}
-\newlabel{julia:led-blue}{{4.{1}}{77}}
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{77}\protected@file@percent }
+\@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{76}\protected@file@percent }
+\@writefile{juliad}{\contentsline {section}{\numberline {4.{1}}Turning on the LED}{76}\protected@file@percent }
+\newlabel{39@xvr}{{}{76}}
+\newlabel{39@vr}{{}{76}}
+\newlabel{julia:led-blue}{{4.{1}}{76}}
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash blue.jl}{76}\protected@file@percent }
 \@writefile{thm}{\contentsline {juliamass}{{Julia Code}{4.{2}}{}}{77}\protected@file@percent }
 \@writefile{juliad}{\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{77}\protected@file@percent }
 \newlabel{40@xvr}{{}{77}}
@@ -439,7 +439,7 @@
 \newlabel{42@xvr}{{}{77}}
 \newlabel{42@vr}{{}{77}}
 \newlabel{julia:lemogreen-blink}{{4.{4}}{77}}
-\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash green\textendash blink.jl}{78}\protected@file@percent }
+\@writefile{lol}{\contentsline {lstlisting}{/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led\textendash green\textendash blink.jl}{77}\protected@file@percent }
 \@writefile{toc}{\contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{78}\protected@file@percent }
 \@writefile{toc}{\contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{78}\protected@file@percent }
 \newlabel{sec:light-OpenModelica}{{4.8.1}{78}}
diff --git a/floss-arduino.cod b/floss-arduino.cod
index 81115f6..7885efd 100644
--- a/floss-arduino.cod
+++ b/floss-arduino.cod
@@ -4,7 +4,7 @@
 \addvspace {10pt}
 \addvspace {10pt}
 \contentsline {section}{\numberline {4.{1}}Turning on the LED through Scilab}{63}%
-\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{64}%
+\contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{63}%
 \contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{64}%
 \contentsline {section}{\numberline {4.{4}}Blinking the green LED}{64}%
 \addvspace {10pt}
diff --git a/floss-arduino.fdb_latexmk b/floss-arduino.fdb_latexmk
index 6ba9ae6..17b270a 100644
--- a/floss-arduino.fdb_latexmk
+++ b/floss-arduino.fdb_latexmk
@@ -1,19 +1,19 @@
 # Fdb version 3
-["bibtex floss-arduino"] 1617563769 "floss-arduino.aux" "floss-arduino.bbl" "floss-arduino" 1617564218
+["bibtex floss-arduino"] 1617584429 "floss-arduino.aux" "floss-arduino.bbl" "floss-arduino" 1617584503
   "/usr/share/texlive/texmf-dist/bibtex/bst/base/unsrt.bst" 1292289607 18030 1376b4b231b50c66211e47e42eda2875 ""
   "bibliography.bib" 1617386964 3464 0dc80d81f59d2ac319f124d77ae8c1cd ""
-  "floss-arduino.aux" 1617564218 125739 efd9ba15d8fde5d877eaba5a6b3c9036 "pdflatex"
+  "floss-arduino.aux" 1617584502 125739 264dfe5109bd4689337c0167e6013edc "pdflatex"
   (generated)
   "floss-arduino.blg"
   "floss-arduino.bbl"
-["makeindex floss-arduino.idx"] 1617563763 "floss-arduino.idx" "floss-arduino.ind" "floss-arduino" 1617564218
-  "floss-arduino.idx" 1617564218 187 a05eb1b6d87503e1c74f523dca5a4bf3 "pdflatex"
+["makeindex floss-arduino.idx"] 1617584423 "floss-arduino.idx" "floss-arduino.ind" "floss-arduino" 1617584503
+  "floss-arduino.idx" 1617584502 187 a05eb1b6d87503e1c74f523dca5a4bf3 "pdflatex"
   (generated)
   "floss-arduino.ilg"
   "floss-arduino.ind"
-["pdflatex"] 1617564212 "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex" "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf" "floss-arduino" 1617564218
+["pdflatex"] 1617584497 "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex" "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf" "floss-arduino" 1617584503
   "/etc/texmf/web2c/texmf.cnf" 1602253014 475 c0e671620eb5563b2130f56340a5fde8 ""
-  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux" 1617564218 125739 efd9ba15d8fde5d877eaba5a6b3c9036 ""
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux" 1617584502 125739 264dfe5109bd4689337c0167e6013edc ""
   "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex" 1616757903 4558 ca761944339060a19cdb71de5337b126 ""
   "/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc" 1165713224 4850 80dc9bab7f31fb78a000ccfed0e27cab ""
   "/usr/share/texlive/texmf-dist/fonts/map/fontname/texfonts.map" 1577235249 3524 cb3e574dea2d1052e39280babc910dc8 ""
@@ -139,18 +139,18 @@
   "/usr/share/texmf/web2c/texmf.cnf" 1581979058 38841 ce3692aa899bb693b90b87eaa5d4d84e ""
   "/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map" 1604540077 4770781 1ed1abab22da9c3e2cc82e4db562318b ""
   "/var/lib/texmf/web2c/pdftex/pdflatex.fmt" 1604540101 8258883 e8330f8aa4fe7c6cdcf08bf0b72237fd ""
-  "floss-arduino.OpenModelicad" 1617564218 2297 17ed7271e546be968410679ec4a1d1da "pdflatex"
-  "floss-arduino.ard" 1617564218 2082 36b255f65f5671ca65cc1689ceb16464 "pdflatex"
-  "floss-arduino.aux" 1617564218 125739 efd9ba15d8fde5d877eaba5a6b3c9036 "pdflatex"
-  "floss-arduino.bbl" 1617563769 2243 ecd6e796a77fc4300039804f4c573e56 "bibtex floss-arduino"
-  "floss-arduino.cod" 1617564218 2525 06816d19852a067fbf43a42e67ae3b9d "pdflatex"
-  "floss-arduino.ind" 1617563763 228 2e39d66b2fe4cf9dd81c4528bf2ab0f3 "makeindex floss-arduino.idx"
-  "floss-arduino.juliad" 1617564218 2311 c1d3609d331b242c2b4e4709e0f83959 "pdflatex"
-  "floss-arduino.lof" 1617564218 11334 f1787bdb4d137f9b1f110f63a795281e "pdflatex"
-  "floss-arduino.lot" 1617564218 3700 defcc24628b4bdce7eac5bd9c654fb36 "pdflatex"
-  "floss-arduino.pyd" 1617564218 2323 8150e7673f5192a2f566887ea31ac0ef "pdflatex"
+  "floss-arduino.OpenModelicad" 1617584502 2297 17ed7271e546be968410679ec4a1d1da "pdflatex"
+  "floss-arduino.ard" 1617584502 2082 99fe0f2e661512111cf1ff3911fa158f "pdflatex"
+  "floss-arduino.aux" 1617584502 125739 264dfe5109bd4689337c0167e6013edc "pdflatex"
+  "floss-arduino.bbl" 1617584429 2243 ecd6e796a77fc4300039804f4c573e56 "bibtex floss-arduino"
+  "floss-arduino.cod" 1617584502 2525 a342c9799fff11ffcc0c1d064bbebeb4 "pdflatex"
+  "floss-arduino.ind" 1617584423 228 2e39d66b2fe4cf9dd81c4528bf2ab0f3 "makeindex floss-arduino.idx"
+  "floss-arduino.juliad" 1617584502 2311 51cee6b0189664750a576b68b249cac6 "pdflatex"
+  "floss-arduino.lof" 1617584502 11334 f1787bdb4d137f9b1f110f63a795281e "pdflatex"
+  "floss-arduino.lot" 1617584502 3700 defcc24628b4bdce7eac5bd9c654fb36 "pdflatex"
+  "floss-arduino.pyd" 1617584502 2323 c2a6277eb95343f8c438eed06faae7cc "pdflatex"
   "floss-arduino.tex" 1616757903 4558 ca761944339060a19cdb71de5337b126 ""
-  "floss-arduino.toc" 1617564218 15103 d4041d097b88ad0b164faba6ead5f083 "pdflatex"
+  "floss-arduino.toc" 1617584502 15103 6adf445ff816c4795ef59f6d78f7fc79 "pdflatex"
   "suppl/acr.tex" 1615963613 1926 fd6481c4666ee0d60331b7d4cc24b645 ""
   "suppl/intro.tex" 1615963613 3437 b09628cf9e20fe17fa65b37a5997653c ""
   "suppl/styles.tex" 1615963613 8143 aa3280f0b59c8631fe8ec44895c9e871 ""
@@ -228,14 +228,14 @@
   "user-code/led/figures/led-green-blink.png" 1615963614 26877 69c8ba68c5a544a9fe3beb9c36fcfd40 ""
   "user-code/led/figures/led.png" 1615963614 3299 6fdaa5be1f5df2c4fa3cc404b111c357 ""
   "user-code/led/figures/led_output.png" 1615963614 4933000 3daaef0abe81c66166eaa3fd911c9b66 ""
-  "user-code/led/figures/rgbled_bb.png" 1615965085 214780 284960cff358f670c168caa9d39e223b ""
+  "user-code/led/figures/rgb-led-bb.png" 1617583787 241915 7c5374def5f441085b2d93294dde7979 ""
   "user-code/led/figures/schematic.png" 1615963614 34562 2b5d2cb148a99242ffb4343097ced0a0 ""
   "user-code/led/julia/led-blue-delay.jl" 1615963614 155 44a9e33622fc3f7ed64ed07862b37d30 ""
   "user-code/led/julia/led-blue-red.jl" 1615963614 229 30922ee6d10d798751eac936811197c6 ""
   "user-code/led/julia/led-blue.jl" 1615963614 127 622bb51db887bc146e7f767e3b1d56f4 ""
   "user-code/led/julia/led-green-blink.jl" 1615963614 191 e8ec59164af34e16a5cd0cff9e58f27e ""
   "user-code/led/julia/test_firmware.jl" 1615963614 146 0fb4c836e3401ff48c75c309e39d01ba ""
-  "user-code/led/led.tex" 1616491601 43393 16261302817f2035d1e0416d97042cb2 ""
+  "user-code/led/led.tex" 1617584497 43385 1aaa080d5e8b04c02ee835b80081d965 ""
   "user-code/led/python/led-blue-delay.py" 1615963614 833 babefa03765e8de3166a7183bb9dea89 ""
   "user-code/led/python/led-blue-red.py" 1615963614 1027 6d7d523452db15fd0dc6861ba415eb9b ""
   "user-code/led/python/led-blue.py" 1615963614 735 58dfc81f1d62cfc75e56cc9c3485031b ""
@@ -373,18 +373,18 @@
   "user-code/thermistor/scilab/therm-read.sce" 1615963614 382 5e743c25b50f9d961a2939ce81d7b633 ""
   "user-code/thermistor/thermistor.tex" 1615974011 24283 566b640d2c28a0d62ba94f5644269a22 ""
   (generated)
-  "floss-arduino.pdf"
-  "floss-arduino.lof"
-  "floss-arduino.juliad"
   "floss-arduino.thm"
+  "floss-arduino.pyd"
+  "floss-arduino.pdf"
   "floss-arduino.lot"
+  "floss-arduino.cod"
+  "floss-arduino.ard"
   "floss-arduino.idx"
-  "floss-arduino.pyd"
   "floss-arduino.toc"
+  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf"
+  "floss-arduino.lof"
   "floss-arduino.OpenModelicad"
-  "floss-arduino.aux"
-  "floss-arduino.log"
-  "floss-arduino.cod"
   "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.log"
-  "floss-arduino.ard"
-  "/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf"
+  "floss-arduino.juliad"
+  "floss-arduino.log"
+  "floss-arduino.aux"
diff --git a/floss-arduino.fls b/floss-arduino.fls
index e14c8e4..0f05983 100644
--- a/floss-arduino.fls
+++ b/floss-arduino.fls
@@ -355,9 +355,9 @@ INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG
-INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb.png
-INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb.png
-INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
+INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
 INPUT /home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino
diff --git a/floss-arduino.juliad b/floss-arduino.juliad
index 63c422e..a4860df 100644
--- a/floss-arduino.juliad
+++ b/floss-arduino.juliad
@@ -1,6 +1,6 @@
 \contentsline {section}{\numberline {3.{1}}A Julia code to check whether the firmware is properly installed or not}{48}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the LED}{77}%
+\contentsline {section}{\numberline {4.{1}}Turning on the LED}{76}%
 \contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{77}%
 \contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{77}%
 \contentsline {section}{\numberline {4.{4}}Blinking the green LED}{77}%
diff --git a/floss-arduino.log b/floss-arduino.log
index 847ad8e..d9d7bca 100644
--- a/floss-arduino.log
+++ b/floss-arduino.log
@@ -1,12 +1,12 @@
-This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019/Debian) (preloaded format=pdflatex 2020.11.5)  5 APR 2021 02:48
+This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019/Debian) (preloaded format=pdflatex 2020.11.5)  5 APR 2021 06:31
 entering extended mode
  restricted \write18 enabled.
+ file:line:error style messages enabled.
  %&-line parsing enabled.
-**floss-arduino.tex
-(./floss-arduino.tex
+**/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex
+(/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.tex
 LaTeX2e <2020-02-02> patch level 2
-L3 programming layer <2020-02-14>
-(/usr/share/texlive/texmf-dist/tex/latex/base/book.cls
+L3 programming layer <2020-02-14> (/usr/share/texlive/texmf-dist/tex/latex/base/book.cls
 Document Class: book 2019/12/20 v1.4l Standard LaTeX document class
 (/usr/share/texlive/texmf-dist/tex/latex/base/bk11.clo
 File: bk11.clo 2019/12/20 v1.4l Standard LaTeX file (size option)
@@ -23,19 +23,15 @@ File: bk11.clo 2019/12/20 v1.4l Standard LaTeX file (size option)
 \abovecaptionskip=\skip47
 \belowcaptionskip=\skip48
 \bibindent=\dimen134
-)
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
 Package: color 2019/11/23 v1.2a Standard LaTeX Color (DPC)
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
 File: color.cfg 2016/01/02 v1.6 sample color configuration
 )
 Package color Info: Driver file: pdftex.def on input line 147.
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
 File: pdftex.def 2018/01/08 v1.0l Graphics/color driver for pdftex
-))
-(/usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty
+)) (/usr/share/texlive/texmf-dist/tex/latex/layouts/layouts.sty
 Package: layouts 2009/09/02 v2.6d graphical depiction of document elements
 \l@ylen=\skip49
 \layoutsbox=\box45
@@ -115,35 +111,27 @@ Package: layouts 2009/09/02 v2.6d graphical depiction of document elements
 \trimtop=\skip72
 \uppermargin=\skip73
 \spinemargin=\skip74
-)
-(/usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/cclicenses/cclicenses.sty
 Package: cclicenses 2005/05/20 v0.4 CC licenses typesetting
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics/rotating.sty
 Package: rotating 2016/08/11 v2.16d rotated objects in LaTeX
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
 Package: graphicx 2019/11/30 v1.2a Enhanced LaTeX Graphics (DPC,SPQR)
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
 Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
 \KV@toks@=\toks15
-)
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
 Package: graphics 2019/11/30 v1.4a Standard LaTeX Graphics (DPC,SPQR)
-
-(/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
 Package: trig 2016/01/03 v1.10 sin cos tan (DPC)
-)
-(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
+) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
 File: graphics.cfg 2016/06/04 v1.11 sample graphics configuration
 )
 Package graphics Info: Driver file: pdftex.def on input line 105.
 )
 \Gin@req@height=\dimen135
 \Gin@req@width=\dimen136
-)
-(/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
 Package: ifthen 2014/09/29 v1.1c Standard LaTeX ifthen package (DPC)
 )
 \c@r@tfl@t=\count292
@@ -157,40 +145,32 @@ Package: ifthen 2014/09/29 v1.1c Standard LaTeX ifthen package (DPC)
 \htmp=\dimen139
 \hpos=\count293
 \vpos=\count294
-)
-(/usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/morefloats/morefloats.sty
 Package: morefloats 2015/07/22 v1.0h Raise limit of unprocessed floats (HMM)
-
-(/usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/kvoptions/kvoptions.sty
 Package: kvoptions 2019/11/29 v3.13 Key value format for package options (HO)
-
-(/usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty
+ (/usr/share/texlive/texmf-dist/tex/generic/ltxcmds/ltxcmds.sty
 Package: ltxcmds 2019/12/15 v1.24 LaTeX kernel commands for general use (HO)
-)
-(/usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty
+) (/usr/share/texlive/texmf-dist/tex/generic/kvsetkeys/kvsetkeys.sty
 Package: kvsetkeys 2019/12/15 v1.18 Key value parser (HO)
 ))
 Package morefloats Info: Maximum number of possible floats asked for: 36
 (morefloats)             (i.e. 18 more floats).
 (morefloats)             LaTeX might run out of memory before this
 (morefloats)             (in which case it will notify you).
-)
-(/usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/paralist/paralist.sty
 Package: paralist 2017/01/22 v2.7 Extended list environments
 \pltopsep=\skip77
 \plpartopsep=\skip78
 \plitemsep=\skip79
 \plparsep=\skip80
 \pl@lab=\toks17
-)
-(/usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/chngcntr/chngcntr.sty
 Package: chngcntr 2018/04/09 v1.1a change counter resetting
 Package chngcntr Info: \counterwithout already defined.
 (chngcntr)             Quitting chngcntr on input line 21.
-)
-(/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
-Package: fancyhdr 2019/01/31 v3.10 Extensive control of page headers and footer
-s
+) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+Package: fancyhdr 2019/01/31 v3.10 Extensive control of page headers and footers
 \f@nch@headwidth=\skip81
 \f@nch@O@elh=\skip82
 \f@nch@O@erh=\skip83
@@ -200,25 +180,21 @@ s
 \f@nch@O@erf=\skip87
 \f@nch@O@olf=\skip88
 \f@nch@O@orf=\skip89
-)
-(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
 Package: amsmath 2020/01/20 v2.17e AMS math features
 \@mathmargin=\skip90
 
 For additional information on amsmath, use the `?' option.
 (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
 Package: amstext 2000/06/29 v2.01 AMS text
-
-(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
 File: amsgen.sty 1999/11/30 v2.0 generic functions
 \@emptytoks=\toks18
 \ex@=\dimen140
-))
-(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
+)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
 Package: amsbsy 1999/11/29 v1.2d Bold Symbols
 \pmbraise@=\dimen141
-)
-(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
 Package: amsopn 2016/03/08 v2.02 operator names
 )
 \inf@bad=\count295
@@ -258,11 +234,9 @@ LaTeX Font Info:    Redeclaring font encoding OMS on input line 734.
 \mathdisplay@stack=\toks22
 LaTeX Info: Redefining \[ on input line 2859.
 LaTeX Info: Redefining \] on input line 2860.
-)
-(/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty
 Package: makeidx 2014/09/29 v1.0m Standard LaTeX package
-)
-(/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/fancybox/fancybox.sty
 Package: fancybox 2010/05/15 1.4
 
 Style option: `fancybox' v1.4 <2010/05/15> (tvz)
@@ -278,19 +252,15 @@ Style option: `fancybox' v1.4 <2010/05/15> (tvz)
 ) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty
 \Urlmuskip=\muskip17
 Package: url 2013/09/16  ver 3.4  Verb mode for urls, etc.
-)
-(/usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/cite/cite.sty
 LaTeX Info: Redefining \cite on input line 302.
 LaTeX Info: Redefining \nocite on input line 332.
 Package: cite 2015/02/27  v 5.5
-)
-(/usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/subfig/subfig.sty
 Package: subfig 2005/06/28 ver: 1.3 subfig package
-
-(/usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/caption/caption.sty
 Package: caption 2020/01/03 v3.4h Customizing captions (AR)
-
-(/usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/caption/caption3.sty
 Package: caption3 2020/01/03 v1.8h caption3 kernel (AR)
 Package caption3 Info: TeX engine: e-TeX on input line 61.
 \captionmargin=\dimen150
@@ -319,8 +289,7 @@ Package caption Info: rotating package is loaded.
 \c@lotdepth=\count315
 \sf@top=\skip96
 \sf@bottom=\skip97
-)
-(/usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/listings/listings.sty
 \lst@mode=\count316
 \lst@gtempboxa=\box51
 \lst@token=\toks27
@@ -333,34 +302,25 @@ Package caption Info: rotating package is loaded.
 \lst@newlines=\count320
 \lst@lineno=\count321
 \lst@maxwidth=\dimen161
-
-(/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
 File: lstmisc.sty 2019/09/10 1.8c (Carsten Heinz)
 \c@lstnumber=\count322
 \lst@skipnumbers=\count323
 \lst@framebox=\box52
-)
-(/usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg
+) (/usr/share/texlive/texmf-dist/tex/latex/listings/listings.cfg
 File: listings.cfg 2019/09/10 1.8c listings configuration
 ))
 Package: listings 2019/09/10 1.8c (Carsten Heinz)
-
-(/usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty
+ (/usr/share/texlive/texmf-dist/tex/latex/tools/varioref.sty
 Package: varioref 2020/01/23 v1.6c package for extended references (FMi)
 \c@vrcnt=\count324
-)
-(/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
 Package: fontenc 2020/02/11 v2.0o Standard LaTeX package
-)
-(/usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/bera/beramono.sty
 Package: beramono 2004/01/31 (WaS)
-)
-(/usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty
-Package: seqsplit 2006/08/07 v0.1 Splitting long sequences (DNA, RNA, proteins,
- etc.) 
-)
-(/home/fossee/Desktop/floss-scilab-arduino/suppl/styles.tex
-(/usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/seqsplit/seqsplit.sty
+Package: seqsplit 2006/08/07 v0.1 Splitting long sequences (DNA, RNA, proteins, etc.) 
+) (/home/fossee/Desktop/floss-scilab-arduino/suppl/styles.tex (/usr/share/texlive/texmf-dist/tex/latex/ntheorem/ntheorem.sty
 Style `ntheorem', Version 1.33 <2011/08/15>
 Package: ntheorem 2011/08/15 1.33
 \theorem@style=\toks28
@@ -401,14 +361,11 @@ Package: ntheorem 2011/08/15 1.33
 \c@OpenModelicamass=\count329
  (/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
 File: lstlang1.sty 2019/09/10 1.8c listings language file
-)
-(/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/listings/lstlang1.sty
 File: lstlang1.sty 2019/09/10 1.8c listings language file
-)
-(/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
+) (/usr/share/texlive/texmf-dist/tex/latex/listings/lstmisc.sty
 File: lstmisc.sty 2019/09/10 1.8c (Carsten Heinz)
-)
-(/usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty)
+) (/usr/share/texlive/texmf-dist/tex/latex/tools/theorem.sty)
 \c@egmass=\count330
 )
 \@indexfile=\write4
@@ -420,8 +377,7 @@ Writing index file floss-arduino.idx
 File: l3backend-pdfmode.def 2020-02-03 L3 backend support: PDF mode
 \l__kernel_color_stack_int=\count331
 \l__pdf_internal_box=\box53
-)
-(./floss-arduino.aux
+) (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux
 
 LaTeX Warning: Label `sec:led-OpenModelica-code' multiply defined.
 
@@ -466,12 +422,9 @@ LaTeX Font Info:    ... okay on input line 108.
 \everyMPtoPDFconversion=\toks47
 ) (/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
 Package: epstopdf-base 2020-01-24 v2.11 Base part for package epstopdf
-Package epstopdf-base Info: Redefining graphics rule for `.eps' on input line 4
-85.
-
-(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
-File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
-e
+Package epstopdf-base Info: Redefining graphics rule for `.eps' on input line 485.
+ (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Live
 ))
 
 Package layouts Warning: Layout scale set to 0.5 on input line 108.
@@ -481,7 +434,7 @@ Package caption Info: subfig package v1.3 is loaded.
 Package caption Info: listings package is loaded.
 Package caption Info: End \AtBeginDocument code.
 \c@lstlisting=\count338
-(./floss-arduino.toc
+(/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.toc
 Overfull \hbox (60.41727pt too wide) detected at line 1
 \T1/cmr/bx/n/10.95 List of Figures 
  []
@@ -534,12 +487,11 @@ Overfull \hbox (42.2769pt too wide) detected at line 204
 \tf@toc=\write5
 \openout5 = `floss-arduino.toc'.
 
- [6] (./floss-arduino.lof [7
+ [6] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lof [7
 
 ] [8]
 Overfull \hbox (4.98741pt too wide) in paragraph at lines 83--83
- [][] []\T1/cmr/m/n/10.95 Turning LEDs on through Xcos de-pend-ing on the po-te
-n-tiome-ter thresh- 
+ [][] []\T1/cmr/m/n/10.95 Turning LEDs on through Xcos de-pend-ing on the po-ten-tiome-ter thresh- 
  []
 
 )
@@ -548,11 +500,11 @@ n-tiome-ter thresh-
 
  [9] [10
 
-] (./floss-arduino.lot [11])
+] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.lot [11])
 \tf@lot=\write7
 \openout7 = `floss-arduino.lot'.
 
- [12] (./floss-arduino.ard)
+ [12] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.ard)
 \tf@ard=\write8
 \openout8 = `floss-arduino.ard'.
 
@@ -560,38 +512,34 @@ n-tiome-ter thresh-
 
 ] [14
 
-]
-(./floss-arduino.cod [15])
+] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.cod [15])
 \tf@cod=\write9
 \openout9 = `floss-arduino.cod'.
 
- [16] (./floss-arduino.pyd [17
+ [16] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pyd [17
 
 ])
 \tf@pyd=\write10
 \openout10 = `floss-arduino.pyd'.
 
- [18]
-(./floss-arduino.juliad)
+ [18] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.juliad)
 \tf@juliad=\write11
 \openout11 = `floss-arduino.juliad'.
 
  [19
 
-] [20] (./floss-arduino.OpenModelicad)
+] [20] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.OpenModelicad)
 \tf@OpenModelicad=\write12
 \openout12 = `floss-arduino.OpenModelicad'.
 
-
-(./suppl/acr.tex [21
+ (/home/fossee/Desktop/floss-scilab-arduino/suppl/acr.tex [21
 
 ] [22])
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
  [23
 
-]
-[24] (./suppl/intro.tex
+] [24] (/home/fossee/Desktop/floss-scilab-arduino/suppl/intro.tex
 Chapter 1.
 
 LaTeX Warning: Command \textregistered invalid in math mode on input line 22.
@@ -611,751 +559,422 @@ Missing character: There is no ® in font cmr6!
 
 
 ]
-LaTeX Font Info:    Trying to load font information for T1+fvm on input line 59
-.
+LaTeX Font Info:    Trying to load font information for T1+fvm on input line 59.
  (/usr/share/texlive/texmf-dist/tex/latex/bera/t1fvm.fd
 File: t1fvm.fd 2004/09/07 scalable font definitions for T1/fvm.
-))
-(./user-code/hw-env/hw-env.tex [2]
+)) (/home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/hw-env.tex [2]
 Chapter 2.
 [3
 
 ]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.
-png, id=101, 419.6478pt x 413.3844pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccon
-tblk.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccont
-blk.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/miccontblk.png  used on input line 50.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png, id=101, 419.6478pt x 413.3844pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png  used on input line 50.
 (pdftex.def)             Requested size: 258.36281pt x 254.51689pt.
- [4 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccont
-blk.png>] [5]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.
-png, id=110, 207.77625pt x 330.23375pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolu
-tion.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolut
-ion.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/resolution.png  used on input line 127.
+ [4 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/miccontblk.png>] [5]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png, id=110, 207.77625pt x 330.23375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png  used on input line 127.
 (pdftex.def)             Requested size: 119.2467pt x 189.52515pt.
- [6 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolut
-ion.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.
-png, id=115, 138.5175pt x 145.54375pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-1
-38px.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-13
-8px.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/OSHW-138px.png  used on input line 182.
+ [6 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/resolution.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png, id=115, 138.5175pt x 145.54375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png  used on input line 182.
 (pdftex.def)             Requested size: 72.26999pt x 75.93634pt.
- [7 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-13
-8px.png>] [8]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png
-, id=125, 585.18625pt x 221.82875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
-o.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
-.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/arduino.png  used on input line 254.
+ [7 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/OSHW-138px.png>] [8]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png, id=125, 585.18625pt x 221.82875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png  used on input line 254.
 (pdftex.def)             Requested size: 357.73405pt x 135.61319pt.
 
 Overfull \hbox (7.40561pt too wide) in paragraph at lines 261--281
  [] 
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg, i
-d=126, 481.8pt x 316.7835pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.j
-pg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jp
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/mega.jpg  used on input line 293.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg, id=126, 481.8pt x 316.7835pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg  used on input line 293.
 (pdftex.def)             Requested size: 258.36281pt x 169.87627pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg, i
-d=127, 321.2pt x 321.2pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.j
-pg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jp
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/lily.jpg  used on input line 304.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg, id=127, 321.2pt x 321.2pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg  used on input line 304.
 (pdftex.def)             Requested size: 178.86702pt x 178.87094pt.
-[9 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.
-png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-pho
-ne.jpg, id=131, 230.15924pt x 153.5162pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
-o-phone.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
--phone.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/arduino-phone.jpg  used on input line 323.
+[9 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg, id=131, 230.15924pt x 153.5162pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg  used on input line 323.
 (pdftex.def)             Requested size: 178.86702pt x 119.30411pt.
- [10 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.j
-pg>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-
-printer.jpg, id=135, 770.88pt x 364.36125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
-o-3d-printer.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
--3d-printer.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/arduino-3d-printer.jpg  used on input line 337.
+ [10 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/mega.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg, id=135, 770.88pt x 364.36125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg  used on input line 337.
 (pdftex.def)             Requested size: 178.86702pt x 84.54076pt.
- [11 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.j
-pg> </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
--phone.jpg>]
-</home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png, id=
-139, 405.76593pt x 347.79938pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png
- Graphic file (type png)
+ [11 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/lily.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-phone.jpg>]
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png, id=139, 405.76593pt x 347.79938pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png Graphic file (type png)
 <use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png>
-
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
-/pcb_board_V1p2.png  used on input line 369.
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png  used on input line 369.
 (pdftex.def)             Requested size: 178.86702pt x 153.31877pt.
 
 Underfull \hbox (badness 1755) in paragraph at lines 371--371
-[]\T1/cmr/m/n/10.95 Figure 2.9: |PCB im-age of the shield. The PCB file can be 
-found at
+[]\T1/cmr/m/n/10.95 Figure 2.9: |PCB im-age of the shield. The PCB file can be found at
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png, id=140
-, 453.94594pt x 320.69812pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png Gr
-aphic file (type png)
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png, id=140, 453.94594pt x 320.69812pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png Graphic file (type png)
 <use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
-/shield-V1p2.png  used on input line 379.
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png  used on input line 379.
 (pdftex.def)             Requested size: 397.48499pt x 280.81079pt.
-</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg, id=141
-, 494.59781pt x 376.40625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg Gr
-aphic file (type jpg)
+</home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg, id=141, 494.59781pt x 376.40625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg Graphic file (type jpg)
 <use /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield
-/shield-V1p2.jpg  used on input line 390.
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg  used on input line 390.
 (pdftex.def)             Requested size: 238.49341pt x 181.5pt.
 
 Underfull \hbox (badness 2689) in paragraph at lines 394--394
-[]\T1/cmr/m/n/10.95 Figure 2.11: |PCB of the shield. The ac-tual im-age can be 
-found at
+[]\T1/cmr/m/n/10.95 Figure 2.11: |PCB of the shield. The ac-tual im-age can be found at
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop
-.jpg, id=142, 608.2725pt x 443.6575pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield
--crop.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-
-crop.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/shield-crop.jpg  used on input line 458.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg, id=142, 608.2725pt x 443.6575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg  used on input line 458.
 (pdftex.def)             Requested size: 397.48499pt x 289.9242pt.
-[12 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
--3d-printer.jpg>]) (./user-code/sw-env/sw-env.tex [13 </home/fossee/Desktop/flo
-ss-scilab-arduino/tools/shield/pcb_board_V1p2.png>] [14 </home/fossee/Desktop/f
-loss-scilab-arduino/tools/shield/shield-V1p2.png>] [15 </home/fossee/Desktop/fl
-oss-scilab-arduino/tools/shield/shield-V1p2.jpg> </home/fossee/Desktop/floss-sc
-ilab-arduino/user-code/hw-env/figures/shield-crop.jpg>] [16]
+[12 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-3d-printer.jpg>]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/sw-env.tex [13 </home/fossee/Desktop/floss-scilab-arduino/tools/shield/pcb_board_V1p2.png>] [14 </home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.png>] [15 </home/fossee/Desktop/floss-scilab-arduino/tools/shield/shield-V1p2.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/shield-crop.jpg>] [16]
 Chapter 3.
 [17
 
 ]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-m
-anager.jpg, id=164, 793.96625pt x 579.16376pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-dev
-ice-manager.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-devi
-ce-manager.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/hw-device-manager.jpg  used on input line 104.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg, id=164, 793.96625pt x 579.16376pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg  used on input line 104.
 (pdftex.def)             Requested size: 397.48499pt x 289.95233pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driv
-er.png, id=165, 635.37375pt x 423.5825pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update
--driver.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-
-driver.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/update-driver.png  used on input line 111.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png, id=165, 635.37375pt x 423.5825pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png  used on input line 111.
 (pdftex.def)             Requested size: 397.48499pt x 264.99695pt.
- [18] [19 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/h
-w-device-manager.jpg>] [20 </home/fossee/Desktop/floss-scilab-arduino/user-code
-/hw-env/figures/update-driver.png (PNG copy)>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png, id
-=177, 545.03625pt x 155.58125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.pn
-g Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png
->
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/run.png  used on input line 185.
+ [18] [19 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/hw-device-manager.jpg>] [20 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/update-driver.png (PNG copy)>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png, id=177, 545.03625pt x 155.58125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png  used on input line 185.
 (pdftex.def)             Requested size: 272.51746pt x 77.79042pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-ardu
-ino-opt.png, id=178, 751.80875pt x 313.17pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch
--arduino-opt.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-
-arduino-opt.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/launch-arduino-opt.png  used on input line 197.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png, id=178, 751.80875pt x 313.17pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png  used on input line 197.
 (pdftex.def)             Requested size: 258.36281pt x 107.62325pt.
 
 Underfull \vbox (badness 1975) has occurred while \output is active []
 
- [21 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.pn
-g> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-a
-rduino-opt.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide
-.jpg, id=184, 856.19875pt x 657.45625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
-o-ide.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino
--ide.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw
--env/figures/arduino-ide.jpg  used on input line 214.
+ [21 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/run.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/launch-arduino-opt.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg, id=184, 856.19875pt x 657.45625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg  used on input line 214.
 (pdftex.def)             Requested size: 397.48499pt x 305.22243pt.
- [22 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduin
-o-ide.jpg>] [23] [24]
-(/home/fossee/Desktop/floss-scilab-arduino/tools/arduino-firmware/arduino-firmw
-are.ino) [25]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.pn
-g, id=199, 787.94376pt x 192.72pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
-cd.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-c
-d.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/linux-cd.png  used on input line 425.
+ [22 </home/fossee/Desktop/floss-scilab-arduino/user-code/hw-env/figures/arduino-ide.jpg>] [23] [24] (/home/fossee/Desktop/floss-scilab-arduino/tools/arduino-firmware/arduino-firmware.ino) [25]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png, id=199, 787.94376pt x 192.72pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png  used on input line 425.
 (pdftex.def)             Requested size: 393.97092pt x 96.35976pt.
- [26 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
-cd.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-dire
-ctory.png, id=205, 602.25pt x 451.6875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change
--directory.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-
-directory.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/change-directory.png  used on input line 456.
+ [26 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-cd.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-directory.png, id=205, 602.25pt x 451.6875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-directory.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-directory.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-directory.png  used on input line 456.
 (pdftex.def)             Requested size: 397.48499pt x 298.12845pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-dire
-ctory.png, id=206, 450.18187pt x 327.47343pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse
--directory.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-
-directory.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/browse-directory.png  used on input line 466.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png, id=206, 450.18187pt x 327.47343pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png  used on input line 466.
 (pdftex.def)             Requested size: 357.73405pt x 260.23521pt.
- [27 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change
--directory.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png
-, id=210, 600.74437pt x 421.575pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builde
-r.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder
-.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/builder.png  used on input line 482.
+ [27 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/change-directory.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png, id=210, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png  used on input line 482.
 (pdftex.def)             Requested size: 397.48499pt x 278.94795pt.
 
 Overfull \hbox (1.53204pt too wide) in paragraph at lines 476--486
-[]\T1/cmr/m/n/10.95 Next, type the fol-low-ing com-mand on the Scilab con-sole:
- \T1/fvm/m/n/10.95 exec builder.sce
+[]\T1/cmr/m/n/10.95 Next, type the fol-low-ing com-mand on the Scilab con-sole: \T1/fvm/m/n/10.95 exec builder.sce
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png,
- id=211, 600.74437pt x 421.575pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader
-.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.
-png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/loader.png  used on input line 498.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png, id=211, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png  used on input line 498.
 (pdftex.def)             Requested size: 300.37144pt x 210.78697pt.
-[28 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-
-directory.png>] [29 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env
-/figures/builder.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-mana
-ger.png, id=218, 602.25pt x 451.6875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device
--manager.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-
-manager.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/device-manager.png  used on input line 526.
+[28 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/browse-directory.png>] [29 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/builder.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png, id=218, 602.25pt x 451.6875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png  used on input line 526.
 (pdftex.def)             Requested size: 397.48499pt x 298.12845pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-propert
-ies.png, id=219, 602.25pt x 451.6875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-pr
-operties.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-pro
-perties.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/com-properties.png  used on input line 547.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png, id=219, 602.25pt x 451.6875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png  used on input line 547.
 (pdftex.def)             Requested size: 301.12425pt x 225.84319pt.
- [30 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader
-.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.
-png, id=223, 634.37pt x 246.9225pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-
-port.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-p
-ort.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/linux-port.png  used on input line 571.
+ [30 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/loader.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png, id=223, 634.37pt x 246.9225pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png  used on input line 571.
 (pdftex.def)             Requested size: 317.18422pt x 123.46094pt.
- [31 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device
--manager.png>] [32 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/
-figures/com-properties.png> </home/fossee/Desktop/floss-scilab-arduino/user-cod
-e/sw-env/figures/linux-port.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/tools/test_firmware.sce)
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-consol
-e.png, id=232, 600.74437pt x 421.575pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-c
-onsole.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-co
-nsole.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/test-console.png  used on input line 622.
+ [31 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/device-manager.png>] [32 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/com-properties.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/linux-port.png>] (/home/fossee/Desktop/floss-scilab-arduino/tools/test_firmware.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png, id=232, 600.74437pt x 421.575pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png  used on input line 622.
 (pdftex.def)             Requested size: 300.37144pt x 210.78697pt.
- [33 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-c
-onsole.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_funct
-ions_crop.pdf, id=236, 1055.945pt x 543.02875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_
-functions_crop.pdf Graphic file (type pdf)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_f
-unctions_crop.pdf>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/table_functions_crop.pdf  used on input line 647.
+ [33 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/test-console.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf, id=236, 1055.945pt x 543.02875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf  used on input line 647.
 (pdftex.def)             Requested size: 397.48499pt x 204.40587pt.
-(/home/fossee/Desktop/floss-scilab-arduino/tools/test_firmware.sce) [34 </home/
-fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_cr
-op.pdf>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.pn
-g, id=247, 376.40625pt x 376.40625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-b
-lk.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-bl
-k.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/sine-blk.png  used on input line 697.
+ (/home/fossee/Desktop/floss-scilab-arduino/tools/test_firmware.sce) [34 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/table_functions_crop.pdf>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png, id=247, 376.40625pt x 376.40625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png  used on input line 697.
 (pdftex.def)             Requested size: 357.73405pt x 357.76195pt.
  [35]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.pn
-g, id=251, 310.15875pt x 109.1578pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-b
-lk.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-bl
-k.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/plot-blk.png  used on input line 749.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png, id=251, 310.15875pt x 109.1578pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png  used on input line 749.
 (pdftex.def)             Requested size: 357.73405pt x 125.90192pt.
 
 Underfull \vbox (badness 1418) has occurred while \output is active []
 
- [36 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-b
-lk.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.p
-ng, id=255, 307.90031pt x 108.405pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-
-blk.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-b
-lk.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/clock-blk.png  used on input line 763.
+ [36 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-blk.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png, id=255, 307.90031pt x 108.405pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png  used on input line 763.
 (pdftex.def)             Requested size: 357.73405pt x 125.95995pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.pn
-g, id=256, 207.77625pt x 253.69781pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-g
-en.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ge
-n.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/sine-gen.png  used on input line 784.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png, id=256, 207.77625pt x 253.69781pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png  used on input line 784.
 (pdftex.def)             Requested size: 178.86702pt x 218.40813pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output
-.png, id=257, 383.18156pt x 184.43906pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-o
-utput.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ou
-tput.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/sine-output.png  used on input line 795.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png, id=257, 383.18156pt x 184.43906pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png  used on input line 795.
 (pdftex.def)             Requested size: 258.36281pt x 124.36716pt.
-
-[37 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-bl
-k.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cloc
-k-blk.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-conf
-ig.png, id=262, 310.15875pt x 289.08pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope
--config.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-
-config.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/cscope-config.png  used on input line 809.
+ [37 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/plot-blk.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/clock-blk.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png, id=262, 310.15875pt x 289.08pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png  used on input line 809.
 (pdftex.def)             Requested size: 258.36281pt x 240.8053pt.
 
 Overfull \hbox (0.16797pt too wide) in paragraph at lines 814--823
-\T1/fvm/m/n/10.95 Set Parameters \T1/cmr/m/n/10.95 win-dow will open. The first
- pa-ram-e-ter is \T1/fvm/m/n/10.95 Final integration
+\T1/fvm/m/n/10.95 Set Parameters \T1/cmr/m/n/10.95 win-dow will open. The first pa-ram-e-ter is \T1/fvm/m/n/10.95 Final integration
  []
 
-[38 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-ge
-n.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine
--output.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.p
-ng, id=266, 333.49594pt x 225.84375pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-se
-tup.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-set
-up.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/sim-setup.png  used on input line 826.
+[38 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-gen.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sine-output.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png, id=266, 333.49594pt x 225.84375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png  used on input line 826.
 (pdftex.def)             Requested size: 258.36281pt x 174.97539pt.
- [39 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope
--config.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-pal
-ette.png, id=270, 292.84406pt x 107.65219pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduin
-o-palette.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino
--palette.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/arduino-palette.png  used on input line 857.
+ [39 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/cscope-config.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png, id=270, 292.84406pt x 107.65219pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png  used on input line 857.
 (pdftex.def)             Requested size: 258.36281pt x 94.98553pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.p
-ng, id=271, 617.30624pt x 466.74374pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-h
-elp.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-he
-lp.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/xcos-help.png  used on input line 864.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png, id=271, 617.30624pt x 466.74374pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png  used on input line 864.
 (pdftex.def)             Requested size: 258.36281pt x 195.35445pt.
- [40 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-se
-tup.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/ar
-duino-palette.png>] [41 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/xcos-help.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py
-[42])
+ [40 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/sim-setup.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/arduino-palette.png>] [41 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/xcos-help.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py [42])
 Underfull \hbox (badness 10000) in paragraph at lines 980--984
 
  []
 
 
 Overfull \hbox (67.80368pt too wide) in paragraph at lines 992--994
-[]\T1/cmr/m/n/10.95 Open Git Bash, in the prompt type: git con-fig --global url
-.https://github.com/.insteadOf
+[]\T1/cmr/m/n/10.95 Open Git Bash, in the prompt type: git con-fig --global url.https://github.com/.insteadOf
  []
 
 [43]
 Overfull \hbox (26.56657pt too wide) in paragraph at lines 1006--1009
-[]\T1/cmr/m/n/10.95 Juno could not be found So-lu-tion: Open Atom>File>Settings
->Packages>julia-
+[]\T1/cmr/m/n/10.95 Juno could not be found So-lu-tion: Open Atom>File>Settings>Packages>julia-
  []
 
 
 Overfull \hbox (8.66742pt too wide) in paragraph at lines 1006--1009
-\T1/cmr/m/n/10.95 client:Settings>Julia path Change the path to $\OMS/cmsy/m/n/
-10.95 n$\T1/cmr/m/n/10.95 ....$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 Julia-0.
-4.5$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 bin$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m
-/n/10.95 julia.exe 
+\T1/cmr/m/n/10.95 client:Settings>Julia path Change the path to $\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 ....$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 Julia-0.4.5$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 bin$\OMS/cmsy/m/n/10.95 n$\T1/cmr/m/n/10.95 julia.exe 
  []
 
 
 Overfull \hbox (17.10689pt too wide) in paragraph at lines 1021--1026
-\T1/cmr/m/n/10.95 ver-sion. Sol: In Ju-lia ter-mi-nal, type: ju-lia> ENV["PYTHO
-N"]="";Pkg.build
+\T1/cmr/m/n/10.95 ver-sion. Sol: In Ju-lia ter-mi-nal, type: ju-lia> ENV["PYTHON"]="";Pkg.build
  []
 
 [44]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-termi
-nal.png, id=289, 725.71124pt x 469.755pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
-terminal.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-t
-erminal.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/julia-terminal.png  used on input line 1064.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal.png, id=289, 725.71124pt x 469.755pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal.png  used on input line 1064.
 (pdftex.def)             Requested size: 362.85474pt x 234.87692pt.
- [45 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-
-terminal.png (PNG copy)>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.
-png, id=293, 1857.94125pt x 1058.95625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-l
-unch.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lu
-nch.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/atom-lunch.png  used on input line 1083.
+ [45 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/julia-terminal.png (PNG copy)>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.png, id=293, 1857.94125pt x 1058.95625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.png  used on input line 1083.
 (pdftex.def)             Requested size: 371.58167pt x 211.78749pt.
 
 Overfull \hbox (5.509pt too wide) in paragraph at lines 1099--1100
-\T1/cmr/m/n/10.95 i-nally de-vel-oped by Steve Kelly (sjkelly) - https://github
-.com/sjkelly/SerialPorts.jl.git 
+\T1/cmr/m/n/10.95 i-nally de-vel-oped by Steve Kelly (sjkelly) - https://github.com/sjkelly/SerialPorts.jl.git 
  []
 
-[46 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lu
-nch.png (PNG copy)>]
+[46 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/atom-lunch.png (PNG copy)>]
 Overfull \hbox (14.89163pt too wide) in paragraph at lines 1147--1149
-[]\T1/cmr/m/n/10.95 open(ser::SerialPort) and close(ser::SerialPort) - To open 
-and close a pre-initialized
+[]\T1/cmr/m/n/10.95 open(ser::SerialPort) and close(ser::SerialPort) - To open and close a pre-initialized
  []
 
-[47]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/test_firmware.jl
-)
+[47] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/test_firmware.jl)
 Overfull \hbox (8.73886pt too wide) in paragraph at lines 1191--1195
-\T1/cmr/m/n/10.95 OpenModelica can be down-loaded free of cost from \T1/fvm/m/n
-/10.95 https://openmodelica.org/\T1/cmr/m/n/10.95 .
+\T1/cmr/m/n/10.95 OpenModelica can be down-loaded free of cost from \T1/fvm/m/n/10.95 https://openmodelica.org/\T1/cmr/m/n/10.95 .
  []
 
 [48]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libr
-aries.png, id=303, 664.4825pt x 546.04pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
--libraries.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-
-libraries.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/OMEdit-libraries.png  used on input line 1212.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png, id=303, 664.4825pt x 546.04pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png  used on input line 1212.
 (pdftex.def)             Requested size: 258.36281pt x 212.31319pt.
- [49 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
--libraries.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.p
-ng, id=309, 1327.96124pt x 792.9625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
--UI.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-
-UI.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/OMEdit-UI.png  used on input line 1245.
+ [49 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-libraries.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png, id=309, 1327.96124pt x 792.9625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png  used on input line 1245.
 (pdftex.def)             Requested size: 258.36281pt x 154.27013pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-mod
-el.png, id=310, 1087.06125pt x 792.9625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-ope
-n-model.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open
--model.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/om-open-model.png  used on input line 1259.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png, id=310, 1087.06125pt x 792.9625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png  used on input line 1259.
 (pdftex.def)             Requested size: 258.36281pt x 188.46364pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling
-.png, id=311, 1368.11125pt x 791.95876pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Mod
-eling.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Mode
-ling.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/om-Modeling.png  used on input line 1266.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling.png, id=311, 1368.11125pt x 791.95876pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-Modeling.png  used on input line 1266.
 (pdftex.def)             Requested size: 258.36281pt x 149.55531pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling
--views.png, id=312, 600.2425pt x 449.68pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mod
-eling-views.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mode
-ling-views.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/om-modeling-views.png  used on input line 1274.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png, id=312, 600.2425pt x 449.68pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png  used on input line 1274.
 (pdftex.def)             Requested size: 258.36281pt x 193.5576pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-vie
-w.png, id=313, 1370.11874pt x 796.9775pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-tex
-t-view.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text
--view.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/om-text-view.png  used on input line 1282.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png, id=313, 1370.11874pt x 796.9775pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png  used on input line 1282.
 (pdftex.def)             Requested size: 258.36281pt x 150.28416pt.
- [50 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit
--UI.png>] [51 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figur
-es/om-open-model.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-e
-nv/figures/om-modeling.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-succ
-ess.png, id=323, 647.41875pt x 516.93124pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim
--success.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-
-success.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw
--env/figures/om-sim-success.png  used on input line 1310.
+ [50 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/OMEdit-UI.png>] [51 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-open-model.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png, id=323, 647.41875pt x 516.93124pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png  used on input line 1310.
 (pdftex.def)             Requested size: 258.36281pt x 206.28767pt.
 
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [52 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-mod
-eling-views.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/fi
-gures/om-text-view.png>] [53 </home/fossee/Desktop/floss-scilab-arduino/user-co
-de/sw-env/figures/om-sim-success.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/test_firm
-ware.mo)) (./user-code/led/led.tex [54]
+ [52 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-modeling-views.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-text-view.png>] [53 </home/fossee/Desktop/floss-scilab-arduino/user-code/sw-env/figures/om-sim-success.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/test_firmware.mo)) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/led.tex [54]
 Chapter 4.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png, id=33
-5, 149.8097pt x 84.315pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png G
-raphic file (type png)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png, id=335, 149.8097pt x 84.315pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png Graphic file (type png)
 <use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led.png  used on input line 51.
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png  used on input line 51.
 (pdftex.def)             Requested size: 79.49577pt x 44.74203pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png,
- id=336, 415.5525pt x 456.70625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic
-.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.
-png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/schematic.png  used on input line 64.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png, id=336, 415.5525pt x 456.70625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png  used on input line 64.
 (pdftex.def)             Requested size: 178.86702pt x 196.58194pt.
 [55
 
  </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield
-.JPG, id=342, 951.48618pt x 713.61462pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-s
-hield.JPG Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-sh
-ield.JPG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/arduino-shield.JPG  used on input line 78.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG, id=342, 951.48618pt x 713.61462pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG  used on input line 78.
 (pdftex.def)             Requested size: 178.86702pt x 134.15085pt.
-
-[56 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.
-png> </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-s
-hield.JPG>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb.png,
- id=347, 450.483pt x 306.746pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb
-.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb.
-png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/rgbled_bb.png  used on input line 102.
-(pdftex.def)             Requested size: 357.73405pt x 243.59512pt.
- [57 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgbled_bb
-.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
-lue.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
-lue.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
-/led-blue-delay.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
-/led-blue-delay.ino) [58]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png
-, id=355, 3035.34pt x 1947.275pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_outpu
-t.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output
-.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led_output.png  used on input line 192.
+ [56 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/schematic.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/arduino-shield.JPG>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png, id=347, 451.286pt x 236.082pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png  used on input line 102.
+(pdftex.def)             Requested size: 357.73405pt x 187.14034pt.
+ [57 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/rgb-led-bb.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino) [58]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png, id=355, 3035.34pt x 1947.275pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png  used on input line 192.
 (pdftex.def)             Requested size: 357.73405pt x 229.47339pt.
-LaTeX Font Info:    Trying to load font information for T1+cmss on input line 2
-04.
-
-(/usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd
+LaTeX Font Info:    Trying to load font information for T1+cmss on input line 204.
+ (/usr/share/texlive/texmf-dist/tex/latex/base/t1cmss.fd
 File: t1cmss.fd 2019/12/16 v2.5j Standard LaTeX font definitions
-) [59]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-b
-lue.ino) [60 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/l
-ed_output.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay
-/led-blue-delay.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/l
-ed-blue-red.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blink/led-
-blink.ino) [61]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
-[62]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
-sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
-sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce)
-[63]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.
-sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sc
-e)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink
-.sce) [64]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png, 
-id=377, 233.37187pt x 252.19218pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.
-png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.p
-ng>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led-blue.png  used on input line 390.
+) [59] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue/led-blue.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-delay/led-blue-delay.ino) [60 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led_output.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blue-red/led-blue-red.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/arduino/led-blink/led-blink.ino) [61] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce) [62] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-delay.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-blue-red.sce [63]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/scilab/led-green-blink.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png, id=374, 233.37187pt x 252.19218pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png  used on input line 390.
 (pdftex.def)             Requested size: 178.86702pt x 193.29965pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 406--415
  [][] 
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay
-.png, id=378, 226.59656pt x 243.91125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-
-delay.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-d
-elay.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led-blue-delay.png  used on input line 425.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay.png, id=375, 226.59656pt x 243.91125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay.png  used on input line 425.
 (pdftex.def)             Requested size: 178.86702pt x 192.53517pt.
-[65 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.p
-ng>]
+[64]
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 440--452
  [][] 
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.p
-ng, id=384, 245.41687pt x 339.51843pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-
-red.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-r
-ed.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led-blue-red.png  used on input line 463.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.png, id=379, 245.41687pt x 339.51843pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.png  used on input line 463.
 (pdftex.def)             Requested size: 178.86702pt x 247.45784pt.
-[66 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-d
-elay.png>]
+
 Overfull \hbox (13.85292pt too wide) in paragraph at lines 479--496
  [][] 
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blin
-k.png, id=389, 246.9225pt x 251.43938pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green
--blink.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-
-blink.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/le
-d/figures/led-green-blink.png  used on input line 506.
+[65 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink.png, id=385, 246.9225pt x 251.43938pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink.png  used on input line 506.
 (pdftex.def)             Requested size: 178.86702pt x 182.13731pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 521--534
  [][] 
  []
 
-[67 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-r
-ed.png>]
-Underfull \vbox (badness 10000) has occurred while \output is active []
-
- [68 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green
--blink.png>] [69]
+[66 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-delay.png>] [67 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-blue-red.png>] [68 </home/fossee/Desktop/floss-scilab-arduino/user-code/led/figures/led-green-blink.png>] [69]
 Underfull \hbox (badness 10000) in paragraph at lines 613--617
 
  []
@@ -1370,181 +989,79 @@ Underfull \hbox (badness 10000) in paragraph at lines 632--635
 
  []
 
-[70] [71]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.
-py [72])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py
-[73])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink
-.py [74]) [75]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl
-[76])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.j
-l)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl)
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.
-jl [77])
+[70] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue.py [71]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-delay.py [72]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-blue-red.py [73]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/python/led-green-blink.py [74]) [75] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue.jl) [76] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-delay.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-blue-red.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/julia/led-green-blink.jl) [77]
 Overfull \hbox (2.4842pt too wide) in paragraph at lines 840--841
-[]\T1/cmr/m/n/10.95 sComm.close_serial(1) : This closes the pre-de-fined se-ria
-l port which is presently
+[]\T1/cmr/m/n/10.95 sComm.close_serial(1) : This closes the pre-de-fined se-rial port which is presently
  []
 
-[78]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.
-mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
-delay.mo [79])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-
-red.mo [80])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green
--blink.mo)) (./user-code/push/push.tex [81] [82
+[78] (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-delay.mo [79]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-blue-red.mo [80]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/led/OpenModelica/led-green-blink.mo)) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/push.tex [81] [82
 
 ]
 Chapter 5.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-co
-nn.png, id=445, 415.5525pt x 438.63875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutt
-on-conn.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutto
-n-conn.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
-sh/figures/pushbutton-conn.png  used on input line 63.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png, id=445, 415.5525pt x 438.63875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png  used on input line 63.
 (pdftex.def)             Requested size: 178.86702pt x 188.80507pt.
 [83]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.p
-ng, id=449, 903.375pt x 564.1075pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-push
-btn.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushb
-tn.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
-sh/figures/ard-pushbtn.png  used on input line 81.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.png, id=449, 903.375pt x 564.1075pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.png  used on input line 81.
 (pdftex.def)             Requested size: 397.48499pt x 248.20805pt.
- [84 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutt
-on-conn.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
-tatus/push-button-status.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
-tatus/push-button-status.ino) [85 </home/fossee/Desktop/floss-scilab-arduino/us
-er-code/push/figures/ard-pushbtn.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-butt
-on/led-push-button.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-s
-tatus/push-button-status.ino)
+ [84 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/pushbutton-conn.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino) [85 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/ard-pushbtn.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/push-button-status/push-button-status.ino)
 Overfull \hbox (0.16989pt too wide) in paragraph at lines 145--148
-[]\T1/cmr/m/n/10.95 Turning the LED on or off de-pend-ing on the push-but-ton. 
-Avail-
+[]\T1/cmr/m/n/10.95 Turning the LED on or off de-pend-ing on the push-but-ton. Avail-
  []
 
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-butt
-on/led-push-button.ino [86])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
-atus.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
-atus.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-butto
-n.sce) [87]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-st
-atus.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/arduino/led-push-button/led-push-button.ino [86]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce) [87] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/push-button-status.sce)
 Overfull \hbox (0.145pt too wide) in paragraph at lines 198--201
-\T1/cmr/m/n/10.95 able at \T1/fvm/m/n/10.95 O r i g i n / u s e r - c o d e / p
- u s h / s c i l a b / l e d - p u s h - b u t t o n . s c e\T1/cmr/m/n/10.95 ,
- see Foot-
+\T1/cmr/m/n/10.95 able at \T1/fvm/m/n/10.95 O r i g i n / u s e r - c o d e / p u s h / s c i l a b / l e d - p u s h - b u t t o n . s c e\T1/cmr/m/n/10.95 , see Foot-
  []
 
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-butto
-n.sce)
-</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-s
-tatus.PNG, id=465, 264.99pt x 268.00125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-but
-ton-status.PNG Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-butt
-on-status.PNG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
-sh/figures/push-button-status.PNG  used on input line 229.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/scilab/led-push-button.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG, id=465, 264.99pt x 268.00125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG  used on input line 229.
 (pdftex.def)             Requested size: 178.86702pt x 180.9012pt.
 
 Overfull \hbox (3.33746pt too wide) in paragraph at lines 247--257
  [][] 
  []
 
-[88] [89 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push
--button-status.PNG>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-butt
-on.PNG, id=473, 298.86656pt x 264.99pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push
--button.PNG Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-
-button.PNG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pu
-sh/figures/led-push-button.PNG  used on input line 272.
+[88] [89 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/push-button-status.PNG>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG, id=473, 298.86656pt x 264.99pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG  used on input line 272.
 (pdftex.def)             Requested size: 178.86702pt x 158.59492pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 289--300
  [][] 
  []
 
-[90 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-
-button.PNG>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
-atus.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
-atus.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-butto
-n.py) [91]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-st
-atus.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-butto
-n.py [92])
+[90 </home/fossee/Desktop/floss-scilab-arduino/user-code/push/figures/led-push-button.PNG>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py) [91] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/push-button-status.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/python/led-push-button.py [92])
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [93]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-sta
-tus.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button
-.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-sta
-tus.jl) [94]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button
-.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-but
-ton-status.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-but
-ton-status.mo [95])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push
--button.mo [96])) (./user-code/ldr/ldr.tex [97] [98
+ [93] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/push-button-status.jl) [94] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/push-button-status.mo [95]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo [96])) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/ldr.tex [97] [98
 
 ]
 Chapter 6.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg, id=50
-4, 106.89937pt x 94.85437pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg G
-raphic file (type jpg)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg, id=504, 106.89937pt x 94.85437pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg Graphic file (type jpg)
 <use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ldr.jpg  used on input line 62.
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg  used on input line 62.
 (pdftex.def)             Requested size: 178.86702pt x 158.72462pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png, i
-d=505, 1009.52156pt x 741.52031pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ldr_sym.png  used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png, id=505, 1009.52156pt x 741.52031pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png  used on input line 65.
 (pdftex.def)             Requested size: 178.86702pt x 131.37468pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png, 
-id=506, 415.5525pt x 450.68375pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.
-png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.p
-ng>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ldr-conn.png  used on input line 71.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png, id=506, 415.5525pt x 450.68375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png  used on input line 71.
 (pdftex.def)             Requested size: 178.86702pt x 193.98965pt.
 [99]
 Overfull \hbox (0.60098pt too wide) in paragraph at lines 87--87
@@ -1554,302 +1071,134 @@ Overfull \hbox (0.60098pt too wide) in paragraph at lines 87--87
 
 Underfull \vbox (badness 3333) has occurred while \output is active []
 
- [100 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg>
- </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png> 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png, i
-d=515, 1086.0575pt x 601.24625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ard-ldr.png  used on input line 99.
+ [100 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr_sym.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-conn.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png, id=515, 1086.0575pt x 601.24625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png  used on input line 99.
 (pdftex.def)             Requested size: 397.48499pt x 220.05396pt.
- [101 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.
-png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
-ead.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
-ead.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
-ead.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-r
-ead.ino [102])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-le
-d.ino) [103]
+ [101 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ard-ldr.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-read/ldr-read.ino [102]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/arduino/ldr-led/ldr-led.ino) [103]
 Overfull \hbox (19.20517pt too wide) in paragraph at lines 200--211
-[]\T1/cmr/m/n/10.95 In this ex-per-i-ment, we will ob-serve the sat-u-ra-tion p
-oint of LDR, see Scilab Code 6.2[].
+[]\T1/cmr/m/n/10.95 In this ex-per-i-ment, we will ob-serve the sat-u-ra-tion point of LDR, see Scilab Code 6.2[].
  []
 
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce
-[104])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce)
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-read.sce [104]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/scilab/ldr-led.sce)
 Overfull \hbox (0.34052pt too wide) in paragraph at lines 244--250
-\T1/cmr/m/n/10.95 Next, we shall per-form the above men-tioned ex-per-i-ment, t
-o read LDR val-ues, through
+\T1/cmr/m/n/10.95 Next, we shall per-form the above men-tioned ex-per-i-ment, to read LDR val-ues, through
  []
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.
-PNG, id=530, 257.46187pt x 304.13625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-
-xcos.PNG Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-x
-cos.PNG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ldr-read-xcos.PNG  used on input line 260.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG, id=530, 257.46187pt x 304.13625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG  used on input line 260.
 (pdftex.def)             Requested size: 178.86702pt x 211.2975pt.
 [105]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png, i
-d=534, 769.87625pt x 640.3925pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ld
-r/figures/ldr-led.png  used on input line 316.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png, id=534, 769.87625pt x 640.3925pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png  used on input line 316.
 (pdftex.def)             Requested size: 258.36281pt x 214.91635pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 337--357
  [][] 
  []
 
-[106 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-
-xcos.PNG>] [107 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figure
-s/ldr-led.png>] [108]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py
-[109])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py
-[110])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button
-.jl) [111]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl)
-[112]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push
--button.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.
-mo [113])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.m
-o)) (./user-code/dcmotor/dcmotor.tex [114]
+[106 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-read-xcos.PNG>] [107 </home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/figures/ldr-led.png>] [108] (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-read.py [109]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/python/ldr-led.py [110]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/julia/led-push-button.jl) [111] (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-read.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/julia/ldr-led.jl) [112] (/home/fossee/Desktop/floss-scilab-arduino/user-code/push/OpenModelica/led-push-button.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-read.mo [113]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/ldr/OpenModelica/ldr-led.mo)) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/dcmotor.tex [114]
 Chapter 7.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_bo
-ard.png, id=565, 247.92625pt x 232.87pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
-or_board.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
-r_board.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/dcmotor_board.png  used on input line 62.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png, id=565, 247.92625pt x 232.87pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png  used on input line 62.
 (pdftex.def)             Requested size: 258.36281pt x 242.69075pt.
 [115
 
 ]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.
-png, id=570, 415.5525pt x 467.7475pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schem
-atic.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schema
-tic.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/schematic.png  used on input line 102.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png, id=570, 415.5525pt x 467.7475pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png  used on input line 102.
 (pdftex.def)             Requested size: 178.86702pt x 201.33447pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_d
-escription.jpg, id=571, 2469.97781pt x 1973.12157pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_mo
-tor_description.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_mot
-or_description.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/dc_motor_description.jpg  used on input line 108.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg, id=571, 2469.97781pt x 1973.12157pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg  used on input line 108.
 (pdftex.def)             Requested size: 258.36281pt x 206.38603pt.
- [116 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmo
-tor_board.png>]
+ [116 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor_board.png>]
 Overfull \vbox (9.00647pt too high) has occurred while \output is active []
 
-
-[117 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schem
-atic.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/
-dc_motor_description.jpg>] [118]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-cl
-ock/dcmotor-clock.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-bo
-th/dcmotor-both.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-lo
-op/dcmotor-loop.ino [119])
+ [117 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/schematic.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dc_motor_description.jpg>] [118] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-clock/dcmotor-clock.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-both/dcmotor-both.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/arduino/dcmotor-loop/dcmotor-loop.ino [119])
 Underfull \hbox (badness 10000) in paragraph at lines 221--237
 
  []
 
-[120]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
-ck.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
-ck.sce) [121]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
-ck.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
-ck.sce) [122]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clo
-ck.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-bot
-h.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loo
-p.sce [123])
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-cl
-ock.png, id=600, 275.52937pt x 290.58563pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
-or-clock.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
-r-clock.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/dcmotor-clock.png  used on input line 399.
+[120] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce) [121] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce) [122] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-clock.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-both.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/scilab/dcmotor-loop.sce [123])
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png, id=600, 275.52937pt x 290.58563pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png  used on input line 399.
 (pdftex.def)             Requested size: 178.86702pt x 188.64784pt.
- [124 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmo
-tor-clock.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-bo
-th.png, id=605, 292.09125pt x 322.95656pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
-or-both.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
-r-both.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/dcmotor-both.png  used on input line 453.
+ [124 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-clock.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png, id=605, 292.09125pt x 322.95656pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png  used on input line 453.
 (pdftex.def)             Requested size: 178.86702pt x 197.77196pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-lo
-op.png, id=606, 281.55188pt x 307.90031pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmot
-or-loop.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmoto
-r-loop.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dc
-motor/figures/dcmotor-loop.png  used on input line 497.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png, id=606, 281.55188pt x 307.90031pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png  used on input line 497.
 (pdftex.def)             Requested size: 178.86702pt x 195.60847pt.
- [125] [126 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figure
-s/dcmotor-both.png>] [127 </home/fossee/Desktop/floss-scilab-arduino/user-code/
-dcmotor/figures/dcmotor-loop.png>] [128]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clo
-ck.py [129])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-bot
-h.py) [130]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loo
-p.py) [131]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-cloc
-k.jl [132])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both
-.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop
-.jl) [133]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
-or-clock.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
-or-both.mo [134])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmot
-or-loop.mo [135])) (./user-code/pot/pot.tex [136]
+ [125] [126 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-both.png>] [127 </home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/figures/dcmotor-loop.png>] [128] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-clock.py [129]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-both.py) [130] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/python/dcmotor-loop.py) [131] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-clock.jl [132]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-both.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/julia/dcmotor-loop.jl) [133] (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-clock.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-both.mo [134]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/dcmotor/OpenModelica/dcmotor-loop.mo [135])) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/pot.tex [136]
 Chapter 8.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png, 
-id=647, 1576.38937pt x 1305.37688pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.
-png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.p
-ng>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
-t/figures/potmeter.png  used on input line 65.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png, id=647, 1576.38937pt x 1305.37688pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png  used on input line 65.
 (pdftex.def)             Requested size: 178.86702pt x 148.11337pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png,
- id=648, 415.5525pt x 417.56pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic
-.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.
-png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
-t/figures/schematic.png  used on input line 68.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png, id=648, 415.5525pt x 417.56pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png  used on input line 68.
 (pdftex.def)             Requested size: 178.86702pt x 179.73206pt.
 [137
 
-] [138 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmete
-r.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schemat
-ic.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
-pot-threshold.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
-pot-threshold.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/
-pot-threshold.ino [139])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
-ce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
-ce) [140]
+] [138 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/potmeter.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/schematic.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/arduino/pot-threshold/pot-threshold.ino [139]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce) [140]
 Overfull \hbox (6.93184pt too wide) in paragraph at lines 171--175
-[]\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
-old. Avail-
+[]\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-old. Avail-
  []
 
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.s
-ce)
-</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.
-PNG, id=664, 548.80031pt x 493.845pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-thres
-hold.PNG Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-thresh
-old.PNG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/po
-t/figures/pot-threshold.PNG  used on input line 189.
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/scilab/pot-threshold.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.PNG, id=664, 548.80031pt x 493.845pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.PNG  used on input line 189.
 (pdftex.def)             Requested size: 258.36281pt x 232.49149pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 207--236
  [][] 
  []
 
-[141] [142 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot
--threshold.PNG>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
-y)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
-y [143])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.p
-y [144])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
-)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
-)
+[141] [142 </home/fossee/Desktop/floss-scilab-arduino/user-code/pot/figures/pot-threshold.PNG>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py [143]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/python/pot-threshold.py [144]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl)
 Overfull \hbox (9.15074pt too wide) in paragraph at lines 289--290
-\T1/cmr/m/n/10.95 where \T1/fvm/m/n/10.95 digiWrite \T1/cmr/m/n/10.95 is used t
-o set the pin 11 high (1) or low (0). We used \T1/fvm/m/n/10.95 sleep(1000)
+\T1/cmr/m/n/10.95 where \T1/fvm/m/n/10.95 digiWrite \T1/cmr/m/n/10.95 is used to set the pin 11 high (1) or low (0). We used \T1/fvm/m/n/10.95 sleep(1000)
  []
 
 
 Overfull \hbox (0.88127pt too wide) in paragraph at lines 296--300
-[]\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
-old. Avail-
+[]\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-old. Avail-
  []
 
-[145]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl
-)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
-hold.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
-hold.mo [146])
+[145] (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/julia/pot-threshold.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo [146])
 Overfull \hbox (7.95369pt too wide) in paragraph at lines 319--323
 []\T1/cmr/m/n/10.95 Turning on LEDs de-pend-ing on the po-ten-tiome-ter thresh-
-
  []
 
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-thres
-hold.mo [147])) (./user-code/thermistor/thermistor.tex [148]
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/pot/OpenModelica/pot-threshold.mo [147])) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/thermistor.tex [148]
 Chapter 9.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bea
-d.jpg, id=691, 139.9629pt x 126.2316pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NT
-C-bead.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC
--bead.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/NTC-bead.jpg  used on input line 70.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg, id=691, 139.9629pt x 126.2316pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg  used on input line 70.
 (pdftex.def)             Requested size: 178.86702pt x 161.32933pt.
 
 LaTeX Warning: Citation `therm-wiki' on page 149 undefined on input line 70.
@@ -1857,133 +1206,65 @@ LaTeX Warning: Citation `therm-wiki' on page 149 undefined on input line 70.
 
 LaTeX Warning: Citation `therm-wiki' on page 149 undefined on input line 70.
 
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-s
-ym.png, id=692, 1284.8pt x 913.4125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-sym.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
-rm-sym.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/therm-sym.png  used on input line 73.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png, id=692, 1284.8pt x 913.4125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png  used on input line 73.
 (pdftex.def)             Requested size: 119.2467pt x 84.76808pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMIS
-TOR-Diagram-crop.pdf, id=693, 329.23pt x 422.57875pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/TH
-ERMISTOR-Diagram-crop.pdf Graphic file (type pdf)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THE
-RMISTOR-Diagram-crop.pdf>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/THERMISTOR-Diagram-crop.pdf  used on input line 83.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf, id=693, 329.23pt x 422.57875pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf  used on input line 83.
 (pdftex.def)             Requested size: 178.86702pt x 229.58835pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-
-Diagram-crop.pdf, id=694, 307.1475pt x 366.36874pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BU
-ZZER-Diagram-crop.pdf Graphic file (type pdf)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZ
-ZER-Diagram-crop.pdf>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/BUZZER-Diagram-crop.pdf  used on input line 87.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf, id=694, 307.1475pt x 366.36874pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf Graphic file (type pdf)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf  used on input line 87.
 (pdftex.def)             Requested size: 178.86702pt x 213.35492pt.
 [149
 
 ]
 Overfull \vbox (30.13353pt too high) has occurred while \output is active []
 
-
-[150 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NT
-C-bead.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/fig
-ures/therm-sym.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermi
-stor/figures/THERMISTOR-Diagram-crop.pdf> </home/fossee/Desktop/floss-scilab-ar
-duino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-the
-rm.png, id=714, 1083.04625pt x 550.055pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ar
-d-therm.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard
--therm.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/ard-therm.png  used on input line 103.
+ [150 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/NTC-bead.jpg> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-sym.png> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/THERMISTOR-Diagram-crop.pdf> </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/BUZZER-Diagram-crop.pdf>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-therm.png, id=714, 1083.04625pt x 550.055pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-therm.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-therm.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-therm.png  used on input line 103.
 (pdftex.def)             Requested size: 397.48499pt x 201.8721pt.
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
-ead/therm-read.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
-ead/therm-read.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
-ead/therm-read.ino) [151 </home/fossee/Desktop/floss-scilab-arduino/user-code/t
-hermistor/figures/ard-therm.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-r
-ead/therm-read.ino [152])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-b
-uzzer/therm-buzzer.ino) [153] [154]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-re
-ad.sce)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-bu
-zzer.sce [155])
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-r
-ead-xcos.png, id=734, 617.30624pt x 548.0475pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-read-xcos.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
-rm-read-xcos.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/therm-read-xcos.png  used on input line 280.
+ (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino) [151 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/ard-therm.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-read/therm-read.ino [152]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/arduino/therm-buzzer/therm-buzzer.ino) [153] [154] (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-read.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/scilab/therm-buzzer.sce [155])
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png, id=734, 617.30624pt x 548.0475pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png  used on input line 280.
 (pdftex.def)             Requested size: 194.76982pt x 172.91183pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-r
-ead.png, id=735, 632.3625pt x 529.98pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-read.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
-rm-read.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/therm-read.png  used on input line 313.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png, id=735, 632.3625pt x 529.98pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png  used on input line 313.
 (pdftex.def)             Requested size: 194.76982pt x 163.23271pt.
- [156 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/t
-herm-read-xcos.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-b
-uzzer-xcos.png, id=740, 627.34375pt x 530.98375pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-buzzer-xcos.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
-rm-buzzer-xcos.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/therm-buzzer-xcos.png  used on input line 329.
+ [156 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read-xcos.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png, id=740, 627.34375pt x 530.98375pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png  used on input line 329.
 (pdftex.def)             Requested size: 258.36281pt x 218.68509pt.
 
 Overfull \hbox (4.77844pt too wide) in paragraph at lines 347--367
  [][] 
  []
 
-[157 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-read.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-b
-uzzer.png, id=746, 612.2875pt x 589.20125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-buzzer.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/the
-rm-buzzer.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/th
-ermistor/figures/therm-buzzer.png  used on input line 373.
+[157 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-read.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png, id=746, 612.2875pt x 589.20125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png  used on input line 373.
 (pdftex.def)             Requested size: 178.86702pt x 172.12265pt.
- [158 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/t
-herm-buzzer-xcos.png>]
+ [158 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer-xcos.png>]
 
 LaTeX Warning: Text page 159 contains only floats.
 
-[159 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/th
-erm-buzzer.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-re
-ad.py [160])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-bu
-zzer.py [161])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-rea
-d.jl [162])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buz
-zer.jl) [163]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
-erm-read.mo [164])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/th
-erm-buzzer.mo) [165]) (./user-code/servo/servo.tex [166]
+[159 </home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/figures/therm-buzzer.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-read.py [160]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/python/therm-buzzer.py [161]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-read.jl [162]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/julia/therm-buzzer.jl) [163] (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-read.mo [164]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/thermistor/OpenModelica/therm-buzzer.mo) [165]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/servo.tex [166]
 Chapter 10.
 
 Underfull \vbox (badness 1975) has occurred while \output is active []
@@ -1992,286 +1273,138 @@ Underfull \vbox (badness 1975) has occurred while \output is active []
 
 ]
 Overfull \hbox (23.49748pt too wide) in paragraph at lines 90--98
-[]\T1/cmr/m/n/10.95 In the first ex-per-i-ment, we will move the ser-vo-mo-tor 
-by $\OT1/cmr/m/n/10.95 30[]$ \T1/cmr/m/n/10.95 us-ing Ar-duino Code 10.1[].
+[]\T1/cmr/m/n/10.95 In the first ex-per-i-ment, we will move the ser-vo-mo-tor by $\OT1/cmr/m/n/10.95 30[]$ \T1/cmr/m/n/10.95 us-ing Ar-duino Code 10.1[].
  []
 
-[168]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/s
-ervo-init.ino [169])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-revers
-e/servo-reverse.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/s
-ervo-loop.ino) [170]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/se
-rvo-pot.ino)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sc
-e) [171]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
-)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
-)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sc
-e)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse
-.sce [172])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sc
-e)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce
-)
-</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.p
-ng, id=800, 265.74281pt x 309.40594pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-i
-nit.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-in
-it.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
-rvo/figures/servo-init.png  used on input line 299.
+[168] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-init/servo-init.ino [169]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-reverse/servo-reverse.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-loop/servo-loop.ino) [170] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/arduino/servo-pot/servo-pot.ino) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce) [171] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-init.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-reverse.sce [172]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-loop.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/scilab/servo-pot.sce)
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png, id=800, 265.74281pt x 309.40594pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png  used on input line 299.
 (pdftex.def)             Requested size: 178.86702pt x 208.2593pt.
  [173]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-revers
-e.png, id=804, 244.66406pt x 281.55188pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-r
-everse.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-re
-verse.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
-rvo/figures/servo-reverse.png  used on input line 334.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png, id=804, 244.66406pt x 281.55188pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png  used on input line 334.
 (pdftex.def)             Requested size: 178.86702pt x 205.84047pt.
 
 Underfull \vbox (badness 3199) has occurred while \output is active []
 
- [174 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
-init.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.p
-ng, id=808, 281.55188pt x 347.04657pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-l
-oop.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-lo
-op.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
-rvo/figures/servo-loop.png  used on input line 372.
+ [174 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-init.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png, id=808, 281.55188pt x 347.04657pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png  used on input line 372.
 (pdftex.def)             Requested size: 178.86702pt x 220.47803pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.pn
-g, id=809, 286.06876pt x 292.09125pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-p
-ot.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-po
-t.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/se
-rvo/figures/servo-pot.png  used on input line 415.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png, id=809, 286.06876pt x 292.09125pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png  used on input line 415.
 (pdftex.def)             Requested size: 178.86702pt x 182.63234pt.
-
-[175 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-r
-everse.png>]
+ [175 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-reverse.png>]
 Overfull \hbox (17.60953pt too wide) in paragraph at lines 435--446
  [][] 
  []
 
-[176 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-l
-oop.png>]
+[176 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-loop.png>]
 
-LaTeX Warning: Reference `sec:py-start' on page 177 undefined on input line 459
-.
+LaTeX Warning: Reference `sec:py-start' on page 177 undefined on input line 459.
 
 
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [177 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-
-pot.png>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
-) [178]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py)
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py
-[179])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse
-.py [180])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py
-[181])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py
-[182])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
-[183]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
-
+ [177 </home/fossee/Desktop/floss-scilab-arduino/user-code/servo/figures/servo-pot.png>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py) [178] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-init.py [179]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-reverse.py [180]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-loop.py [181]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/python/servo-pot.py [182]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl) [183] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-init.jl)
 Overfull \hbox (2.67752pt too wide) in paragraph at lines 600--604
-[]\T1/cmr/m/n/10.95 Rotating the ser-vo-mo-tor to a spec-i-fied de-gree and re-
-vers-ing. Avail-
+[]\T1/cmr/m/n/10.95 Rotating the ser-vo-mo-tor to a spec-i-fied de-gree and re-vers-ing. Avail-
  []
 
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.
-jl) [184]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl)
-[185]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-i
-nit.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_p
-ot.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_p
-ot.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-i
-nit.mo [186])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-r
-everse.mo [187])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-l
-oop.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_p
-ot.mo [188])) (./user-code/modbus/modbus.tex [189] [190
+(/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-reverse.jl) [184] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-loop.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/julia/servo-pot.jl) [185] (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_pot.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_pot.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-init.mo [186]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-reverse.mo [187]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo-loop.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/servo/OpenModelica/servo_pot.mo [188])) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/modbus.tex [189] [190
 
 ]
 Chapter 11.
 [191]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png, i
-d=864, 672.5125pt x 224.84pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/fig1.png  used on input line 71.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png, id=864, 672.5125pt x 224.84pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png  used on input line 71.
 (pdftex.def)             Requested size: 357.73405pt x 119.60033pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png, i
-d=865, 360.34625pt x 375.4025pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/fig2.png  used on input line 79.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png, id=865, 360.34625pt x 375.4025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png  used on input line 79.
 (pdftex.def)             Requested size: 178.86702pt x 186.33748pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png, i
-d=866, 481.04718pt x 214.55156pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.p
-ng Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.pn
-g>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/fig3.png  used on input line 106.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png, id=866, 481.04718pt x 214.55156pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png  used on input line 106.
 (pdftex.def)             Requested size: 357.73405pt x 159.55464pt.
- [192 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.
-png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/fig
-ures/fig2.png (PNG copy)>] [193 </home/fossee/Desktop/floss-scilab-arduino/user
--code/modbus/figures/fig3.png (PNG copy)>] [194] [195]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up
-.png, id=881, 722.7pt x 542.025pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-S
-et-Up.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Se
-t-Up.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/Full-Set-Up.png  used on input line 300.
+ [192 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig1.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig2.png (PNG copy)>] [193 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/fig3.png (PNG copy)>] [194] [195]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png, id=881, 722.7pt x 542.025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png  used on input line 300.
 (pdftex.def)             Requested size: 258.36281pt x 193.77246pt.
  [196]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagr
-am.PNG, id=885, 398.23781pt x 255.95625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-
-diagram.PNG Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-d
-iagram.PNG>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/block-diagram.PNG  used on input line 329.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG, id=885, 398.23781pt x 255.95625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG  used on input line 329.
 (pdftex.def)             Requested size: 258.36281pt x 166.06104pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_cod
-e_flowchart.png, id=886, 327.2225pt x 480.79625pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduin
-o_code_flowchart.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino
-_code_flowchart.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/arduino_code_flowchart.png  used on input line 348.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png, id=886, 327.2225pt x 480.79625pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png  used on input line 348.
 (pdftex.def)             Requested size: 258.36281pt x 379.61945pt.
- [197 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-
-Set-Up.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.p
-ng, id=891, 482.55281pt x 362.10281pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowch
-art.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowcha
-rt.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/flowchart.png  used on input line 376.
+ [197 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/Full-Set-Up.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png, id=891, 482.55281pt x 362.10281pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png  used on input line 376.
 (pdftex.def)             Requested size: 357.73405pt x 268.44914pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-out
-put.png, id=892, 1028.34187pt x 578.16pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/curren
-t-output.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current
--output.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/current-output.png  used on input line 393.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png, id=892, 1028.34187pt x 578.16pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png  used on input line 393.
 (pdftex.def)             Requested size: 397.48499pt x 223.4789pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-out
-put-setup.jpg, id=893, 2509.375pt x 1411.2725pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/curren
-t-output-setup.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current
--output-setup.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/current-output-setup.jpg  used on input line 400.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg, id=893, 2509.375pt x 1411.2725pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg  used on input line 400.
 (pdftex.def)             Requested size: 258.36281pt x 145.29163pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-out
-put.png, id=894, 1028.34187pt x 578.16pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltag
-e-output.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage
--output.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/voltage-output.png  used on input line 412.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png, id=894, 1028.34187pt x 578.16pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png  used on input line 412.
 (pdftex.def)             Requested size: 397.48499pt x 223.4789pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-out
-put-setup.jpg, id=895, 2509.375pt x 1411.2725pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltag
-e-output-setup.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage
--output-setup.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/voltage-output-setup.jpg  used on input line 419.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg, id=895, 2509.375pt x 1411.2725pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg  used on input line 419.
 (pdftex.def)             Requested size: 258.36281pt x 145.29163pt.
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-powe
-r-output.png, id=896, 1028.34187pt x 578.16pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active
--power-output.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-
-power-output.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/active-power-output.png  used on input line 429.
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png, id=896, 1028.34187pt x 578.16pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png  used on input line 429.
 (pdftex.def)             Requested size: 397.48499pt x 223.4789pt.
-
-[198 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-
-diagram.PNG>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-powe
-r-output-setup.jpg, id=901, 2509.375pt x 1411.2725pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active
--power-output-setup.jpg Graphic file (type jpg)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-
-power-output-setup.jpg>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/active-power-output-setup.jpg  used on input line 436.
+ [198 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/block-diagram.PNG>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg, id=901, 2509.375pt x 1411.2725pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg Graphic file (type jpg)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg  used on input line 436.
 (pdftex.def)             Requested size: 258.36281pt x 145.29163pt.
 
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [199 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/ardui
-no_code_flowchart.png>]
-</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_
-xcos.png, id=907, 635.37375pt x 455.7025pt>
-File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_v
-alue_xcos.png Graphic file (type png)
-<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_va
-lue_xcos.png>
-Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/mo
-dbus/figures/read_value_xcos.png  used on input line 463.
+ [199 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/arduino_code_flowchart.png>]
+</home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png, id=907, 635.37375pt x 455.7025pt>
+File: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png Graphic file (type png)
+<use /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png>
+Package pdftex.def Info: /home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png  used on input line 463.
 (pdftex.def)             Requested size: 258.36281pt x 185.30946pt.
 
 Underfull \hbox (badness 1259) in paragraph at lines 466--466
-[]\T1/cmr/m/n/10.95 Figure 11.14: |Xcos di-a-gram to read En-ergy Me-ter val-ue
-s. This is what
+[]\T1/cmr/m/n/10.95 Figure 11.14: |Xcos di-a-gram to read En-ergy Me-ter val-ues. This is what
  []
 
 
@@ -2279,46 +1412,10 @@ Overfull \hbox (16.70493pt too wide) in paragraph at lines 479--491
  [][] 
  []
 
-[200 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowch
-art.png (PNG copy)>] [201 </home/fossee/Desktop/floss-scilab-arduino/user-code/
-modbus/figures/current-output.png (PNG copy)> </home/fossee/Desktop/floss-scila
-b-arduino/user-code/modbus/figures/current-output-setup.jpg>]
+[200 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/flowchart.png (PNG copy)>] [201 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/current-output-setup.jpg>]
 Underfull \vbox (badness 10000) has occurred while \output is active []
 
- [202 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/volta
-ge-output.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/
-modbus/figures/voltage-output-setup.jpg>]
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet
-.ino [203 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/a
-ctive-power-output.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/u
-ser-code/modbus/figures/active-power-output-setup.jpg>] [204 </home/fossee/Desk
-top/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png>])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce
-)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current
-.sci)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage
-.sci [205])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_
-power.sci)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current
-.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage
-.py [206])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_
-power.py)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.j
-l)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.j
-l [207])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl)
-
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCu
-rrent.mo)
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVo
-ltage.mo [208])
-(/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPo
-wer.mo)) (./floss-arduino.bbl [209] [210
+ [202 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/voltage-output-setup.jpg>] (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/arduino/send_packet.ino [203 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output.png (PNG copy)> </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/active-power-output-setup.jpg>] [204 </home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/figures/read_value_xcos.png>]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_val.sce) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_current.sci) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_voltage.sci [205]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/scilab/read_active_power.sci) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_current.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_voltage.py [206]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/python/read_active_power.py) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readCurrent.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readVoltage.jl [207]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/julia/readPower.jl) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readCurrent.mo) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readVoltage.mo [208]) (/home/fossee/Desktop/floss-scilab-arduino/user-code/modbus/OpenModelica/readPower.mo)) (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.bbl [209] [210
 
 ]
 Underfull \hbox (badness 10000) in paragraph at lines 4--9
@@ -2327,33 +1424,29 @@ Underfull \hbox (badness 10000) in paragraph at lines 4--9
 
 
 Underfull \hbox (badness 10000) in paragraph at lines 4--9
-\T1/cmr/m/n/10.95 https://www.scilab.org/community/scilabtec/2009/Use-of-Scilab
--for-space-
+\T1/cmr/m/n/10.95 https://www.scilab.org/community/scilabtec/2009/Use-of-Scilab-for-space-
  []
 
 
 Overfull \hbox (19.10986pt too wide) in paragraph at lines 28--31
-[]\T1/cmr/m/n/10.95 Arduino uno.  https://www.arduino.cc/en/uploads/Main/Arduin
-oUnoFront240.jpg.
+[]\T1/cmr/m/n/10.95 Arduino uno.  https://www.arduino.cc/en/uploads/Main/ArduinoUnoFront240.jpg.
  []
 
 
 Overfull \hbox (13.0502pt too wide) in paragraph at lines 33--37
-[]\T1/cmr/m/n/10.95 Arduino mega.  https://www.arduino.cc/en/uploads/Main/Ardui
-noMega2560_R3
+[]\T1/cmr/m/n/10.95 Arduino mega.  https://www.arduino.cc/en/uploads/Main/ArduinoMega2560_R3
  []
 
 
 Overfull \hbox (15.39987pt too wide) in paragraph at lines 49--53
-[]\T1/cmr/m/n/10.95 Candy sort-ing ma-chine.  http://beta.ivc.no/wiki/index.php
-/Skittles_M%26M%27s
+[]\T1/cmr/m/n/10.95 Candy sort-ing ma-chine.  http://beta.ivc.no/wiki/index.php/Skittles_M%26M%27s
  []
 
 [211])
 \tf@thm=\write13
 \openout13 = `floss-arduino.thm'.
 
- [212] (./floss-arduino.aux)
+ [212] (/home/fossee/Desktop/floss-scilab-arduino/floss-arduino.aux)
 
 LaTeX Warning: There were undefined references.
 
@@ -2362,38 +1455,15 @@ LaTeX Warning: There were multiply-defined labels.
 
  ) 
 Here is how much of TeX's memory you used:
- 9665 strings out of 481239
- 204901 string characters out of 5920377
+ 9676 strings out of 481239
+ 207584 string characters out of 5920377
  742688 words of memory out of 5000000
  24217 multiletter control sequences out of 15000+600000
  554670 words of font info for 69 fonts, out of 8000000 for 9000
  1143 hyphenation exceptions out of 8191
- 50i,11n,53p,467b,1777s stack positions out of 5000i,500n,10000p,200000b,80000s
-{/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-ts1.enc}{/usr/share/texmf
-/fonts/enc/dvips/cm-super/cm-super-t1.enc}{/usr/share/texlive/texmf-dist/fonts/
-enc/dvips/base/8r.enc}</usr/share/texlive/texmf-dist/fonts/type1/public/amsfont
-s/cm/cmex10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/c
-mmi10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi8.p
-fb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb></us
-r/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/share/
-texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/share/texlive/
-texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/share/texlive/texmf-
-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb></usr/share/texlive/texmf-dist/fo
-nts/type1/public/amsfonts/cm/cmsy8.pfb></usr/share/texlive/texmf-dist/fonts/typ
-e1/public/amsfonts/cm/cmsy9.pfb></usr/share/texlive/texmf-dist/fonts/type1/publ
-ic/bera/fvmr8a.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx0900.pfb><
-/usr/share/texmf/fonts/type1/public/cm-super/sfbx1095.pfb></usr/share/texmf/fon
-ts/type1/public/cm-super/sfbx1200.pfb></usr/share/texmf/fonts/type1/public/cm-s
-uper/sfbx1440.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx2074.pfb></
-usr/share/texmf/fonts/type1/public/cm-super/sfbx2488.pfb></usr/share/texmf/font
-s/type1/public/cm-super/sfrm0600.pfb></usr/share/texmf/fonts/type1/public/cm-su
-per/sfrm0800.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm0900.pfb></u
-sr/share/texmf/fonts/type1/public/cm-super/sfrm1000.pfb></usr/share/texmf/fonts
-/type1/public/cm-super/sfrm1095.pfb></usr/share/texmf/fonts/type1/public/cm-sup
-er/sfrm1200.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfsi1095.pfb></us
-r/share/texmf/fonts/type1/public/cm-super/sfss1095.pfb></usr/share/texmf/fonts/
-type1/public/cm-super/sfti1095.pfb>
-Output written on floss-arduino.pdf (236 pages, 23565489 bytes).
+ 50i,11n,53p,509b,1777s stack positions out of 5000i,500n,10000p,200000b,80000s
+{/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-ts1.enc}{/usr/share/texmf/fonts/enc/dvips/cm-super/cm-super-t1.enc}{/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc}</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi8.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr9.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy6.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy8.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy9.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/bera/fvmr8a.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx0900.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx1095.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx1200.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx1440.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx2074.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfbx2488.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm0600.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm0800.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm0900.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm1000.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm1095.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfrm1200.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfsi1095.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfss1095.pfb></usr/share/texmf/fonts/type1/public/cm-super/sfti1095.pfb>
+Output written on /home/fossee/Desktop/floss-scilab-arduino/floss-arduino.pdf (236 pages, 23579867 bytes).
 PDF statistics:
  1048 PDF objects out of 1200 (max. 8388607)
  623 compressed objects within 7 object streams
diff --git a/floss-arduino.pdf b/floss-arduino.pdf
index 70a7acb..6563ccf 100644
--- a/floss-arduino.pdf
+++ b/floss-arduino.pdf
diff --git a/floss-arduino.pyd b/floss-arduino.pyd
index d35692a..9a37ba1 100644
--- a/floss-arduino.pyd
+++ b/floss-arduino.pyd
@@ -1,7 +1,7 @@
 \addvspace {10pt}
 \contentsline {section}{\numberline {3.{1}}A Python code to check whether the firmware is properly installed or not}{42}%
 \addvspace {10pt}
-\contentsline {section}{\numberline {4.{1}}Turning on the LED through Python}{72}%
+\contentsline {section}{\numberline {4.{1}}Turning on the LED through Python}{71}%
 \contentsline {section}{\numberline {4.{2}}Turning on the blue LED and turning it off after two seconds}{72}%
 \contentsline {section}{\numberline {4.{3}}Turning on blue and red LEDs for 5 seconds and then turning them off one by one}{73}%
 \contentsline {section}{\numberline {4.{4}}Blinking the green LED}{74}%
diff --git a/floss-arduino.synctex.gz b/floss-arduino.synctex.gz
new file mode 100644
index 0000000..7668da5
--- /dev/null
+++ b/floss-arduino.synctex.gz
diff --git a/floss-arduino.thm b/floss-arduino.thm
index 0e12e10..e41c9a8 100644
--- a/floss-arduino.thm
+++ b/floss-arduino.thm
@@ -5,20 +5,20 @@
 \contentsline {OpenModelicamass}{{OpenModelica Code}{3.{1}}{}}{54}%
 \contentsline {egmass}{{Exercise}{4.{1}}{}}{59}%
 \contentsline {ardmass}{{Arduino Code}{4.{1}}{}}{60}%
-\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{61}%
+\contentsline {ardmass}{{Arduino Code}{4.{2}}{}}{60}%
 \contentsline {ardmass}{{Arduino Code}{4.{3}}{}}{61}%
 \contentsline {ardmass}{{Arduino Code}{4.{4}}{}}{61}%
 \contentsline {egmass}{{Exercise}{4.{2}}{}}{63}%
 \contentsline {codemass}{{Scilab Code}{4.{1}}{}}{63}%
-\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{64}%
+\contentsline {codemass}{{Scilab Code}{4.{2}}{}}{63}%
 \contentsline {codemass}{{Scilab Code}{4.{3}}{}}{64}%
 \contentsline {codemass}{{Scilab Code}{4.{4}}{}}{64}%
 \contentsline {egmass}{{Exercise}{4.{3}}{}}{67}%
-\contentsline {pymass}{{Python Code}{4.{1}}{}}{72}%
+\contentsline {pymass}{{Python Code}{4.{1}}{}}{71}%
 \contentsline {pymass}{{Python Code}{4.{2}}{}}{72}%
 \contentsline {pymass}{{Python Code}{4.{3}}{}}{73}%
 \contentsline {pymass}{{Python Code}{4.{4}}{}}{74}%
-\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{77}%
+\contentsline {juliamass}{{Julia Code}{4.{1}}{}}{76}%
 \contentsline {juliamass}{{Julia Code}{4.{2}}{}}{77}%
 \contentsline {juliamass}{{Julia Code}{4.{3}}{}}{77}%
 \contentsline {juliamass}{{Julia Code}{4.{4}}{}}{77}%
diff --git a/floss-arduino.toc b/floss-arduino.toc
index b8ce89a..cae7e96 100644
--- a/floss-arduino.toc
+++ b/floss-arduino.toc
@@ -61,16 +61,16 @@
 \contentsline {paragraph}{Note:}{59}%
 \contentsline {paragraph}{Note:}{59}%
 \contentsline {subsection}{\numberline {4.3.2}Arduino Code}{60}%
-\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{62}%
-\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{62}%
+\contentsline {section}{\numberline {4.4}Lighting the LED from Scilab}{61}%
+\contentsline {subsection}{\numberline {4.4.1}Lighting the LED}{61}%
 \contentsline {subsection}{\numberline {4.4.2}Scilab Code}{63}%
 \contentsline {section}{\numberline {4.5}Lighting the LED from Scilab Xcos}{64}%
-\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{69}%
-\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{69}%
-\contentsline {subsection}{\numberline {4.6.2}Python Code}{72}%
+\contentsline {section}{\numberline {4.6}Lighting the LED from Python}{67}%
+\contentsline {subsection}{\numberline {4.6.1}Lighting the LED}{67}%
+\contentsline {subsection}{\numberline {4.6.2}Python Code}{71}%
 \contentsline {section}{\numberline {4.7}Lighting the LED from Julia}{75}%
 \contentsline {subsection}{\numberline {4.7.1}Lighting the LED}{75}%
-\contentsline {subsection}{\numberline {4.7.2}Julia Code}{77}%
+\contentsline {subsection}{\numberline {4.7.2}Julia Code}{76}%
 \contentsline {section}{\numberline {4.8}Lighting the LED from OpenModelica}{78}%
 \contentsline {subsection}{\numberline {4.8.1}Lighting the LED}{78}%
 \contentsline {subsection}{\numberline {4.8.2}OpenModelica Code}{79}%
diff --git a/user-code/led/figures/rgb-led-bb.png b/user-code/led/figures/rgb-led-bb.png
new file mode 100644
index 0000000..721d78c
--- /dev/null
+++ b/user-code/led/figures/rgb-led-bb.png
diff --git a/user-code/led/figures/rgbled_bb.png b/user-code/led/figures/rgbled_bb.png
deleted file mode 100644
index f580f24..0000000
--- a/user-code/led/figures/rgbled_bb.png
+++ /dev/null
diff --git a/user-code/led/led.tex b/user-code/led/led.tex
index 65c1e84..a1b34f1 100644
--- a/user-code/led/led.tex
+++ b/user-code/led/led.tex
@@ -27,7 +27,7 @@
 

 In this chapter, we will learn how to control the LEDs on the shield

 and on the \arduino\ board.  We will do this through the Arduino IDE,

-Scilab scripts and Scilab Xcos.  These are beginner level experiments,

+Scilab scripts, Scilab Xcos, Python, and OpenModelica.  These are beginner level experiments,

 and often referred to as the \emph{hello world} task of Arduino.

 Although simple, controlling LED is a very important task in all

 kinds of electronic boards.

@@ -93,21 +93,21 @@ for performing the experiments given in this chapter. 
 A breadboard is a device for holding the components of a circuit, and connecting them together.

 We can build an electronic circuit on a breadboard without doing any soldering. To know more about the 

 breadboard and other electronic components, one should watch the Spoken Tutorials on Arduino as published on 

-  {\tt https://spoken-tutorial.org/}. In case, you have an RGB LED and you want to try connecting it with \arduino\ on a breadboard, you should 

-refer to the sixth tutorial titled Arduino with Tricolor LED and Push button on {\tt https://spoken-tutorial.org/}.

-To know the connections, please refer to the figure \ref{fig:ard-rgb-bread}. 

+{\tt https://spoken-tutorial.org/}. In case, you have an RGB LED and you want to try connecting it with \arduino\ on a breadboard,  

+please refer to \figref{fig:ard-rgb-bread}. Also, you should refer to the sixth tutorial titled Arduino with Tricolor LED and 

+Push button on {\tt https://spoken-tutorial.org/}. 

 

 \begin{figure}

   \centering

-  \includegraphics[width=\hgfig]{\LocLEDfig/rgbled_bb.png}

+  \includegraphics[width=\hgfig]{\LocLEDfig/rgb-led-bb.png}

   \caption{Interfacing an RGB LED with Arduino Uno using a breadboard}

   \label{fig:ard-rgb-bread}

 \end{figure}

 

-In figure \ref{fig:ard-rgb-bread}, there is an RGB LED with four legs. 

+In \figref{fig:ard-rgb-bread}, there is an RGB LED with four legs. 

 From the left, the first leg represents the anode (+) pin for the red LED. 

 The second leg represents the common cathode for every color. 

-The third and fourth legs represent the anode (+) pin for blue LED, and green LED respectively. 

+The third and fourth legs represent the anode (+) pin for green LED and blue LED respectively. 

 The anode pins of red, green, and blue are, respectively, connected to digital pins 11, 10, and 9 of Arduino Uno. 

 On the other hand, common cathode is connected to the ground (GND) terminal.