%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%Tutorial slides on Python.
%
% Author: FOSSEE
% Copyright (c) 2009, FOSSEE, IIT Bombay
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\documentclass[14pt,compress]{beamer}
%\documentclass[draft]{beamer}
%\documentclass[compress,handout]{beamer}
%\usepackage{pgfpages} 
%\pgfpagesuselayout{2 on 1}[a4paper,border shrink=5mm]

% Modified from: generic-ornate-15min-45min.de.tex
\mode<presentation>
{
  \usetheme{Warsaw}
  \useoutertheme{infolines}
  \setbeamercovered{transparent}
}

\usepackage[english]{babel}
\usepackage[latin1]{inputenc}
%\usepackage{times}
\usepackage[T1]{fontenc}

% Taken from Fernando's slides.
\usepackage{ae,aecompl}
\usepackage{mathpazo,courier,euler}
\usepackage[scaled=.95]{helvet}

\definecolor{darkgreen}{rgb}{0,0.5,0}

\usepackage{listings}
\lstset{language=Python,
    basicstyle=\ttfamily\bfseries,
    commentstyle=\color{red}\itshape,
  stringstyle=\color{darkgreen},
  showstringspaces=false,
  keywordstyle=\color{blue}\bfseries}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Macros
\setbeamercolor{emphbar}{bg=blue!20, fg=black}
\newcommand{\emphbar}[1]
{\begin{beamercolorbox}[rounded=true]{emphbar} 
      {#1}
 \end{beamercolorbox}
}
\newcounter{time}
\setcounter{time}{0}
\newcommand{\inctime}[1]{\addtocounter{time}{#1}{\tiny \thetime\ m}}

\newcommand{\typ}[1]{\lstinline{#1}}

\newcommand{\kwrd}[1]{ \texttt{\textbf{\color{blue}{#1}}}  }

%%% This is from Fernando's setup.
% \usepackage{color}
% \definecolor{orange}{cmyk}{0,0.4,0.8,0.2}
% % Use and configure listings package for nicely formatted code
% \usepackage{listings}
% \lstset{
%    language=Python,
%    basicstyle=\small\ttfamily,
%    commentstyle=\ttfamily\color{blue},
%    stringstyle=\ttfamily\color{orange},
%    showstringspaces=false,
%    breaklines=true,
%    postbreak = \space\dots
% }


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Title page
\title[Plotting with Python]{Python for Science and Engg: Plotting experimental data}

\author[FOSSEE] {FOSSEE}

\institute[IIT Bombay] {Department of Aerospace Engineering\\IIT Bombay}
\date[] {11 January, 2010\\Day 1, Session 2}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%\pgfdeclareimage[height=0.75cm]{iitmlogo}{iitmlogo}
%\logo{\pgfuseimage{iitmlogo}}


%% Delete this, if you do not want the table of contents to pop up at
%% the beginning of each subsection:
\AtBeginSubsection[]
{
  \begin{frame}<beamer>
    \frametitle{Outline}
    \tableofcontents[currentsection,currentsubsection]
  \end{frame}
}

\AtBeginSection[]
{
  \begin{frame}<beamer>
    \frametitle{Outline}
    \tableofcontents[currentsection,currentsubsection]
  \end{frame}
}

% If you wish to uncover everything in a step-wise fashion, uncomment
% the following command: 
%\beamerdefaultoverlayspecification{<+->}

%\includeonlyframes{current,current1,current2,current3,current4,current5,current6}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% DOCUMENT STARTS
\begin{document}

\begin{frame}
  \titlepage
\end{frame}

\begin{frame}
  \frametitle{Outline}
  \tableofcontents
  % You might wish to add the option [pausesections]
\end{frame}

\section{Plotting Points}
\begin{frame}[fragile]
\frametitle{Why would I plot f(x)?}
Do we plot analytical functions or experimental data?
\begin{small}
\begin{lstlisting}
In []: x = [0, 1, 2, 3]

In []: y = [7, 11, 15, 19]

In []: plot(x, y)
Out[]: [<matplotlib.lines.Line2D object at 0xa73aa8c>]

In []: xlabel('X')
Out[]: <matplotlib.text.Text object at 0x986e9ac>

In []: ylabel('Y')
Out[]: <matplotlib.text.Text object at 0x98746ec>
\end{lstlisting}
\end{small}
\end{frame}

\begin{frame}[fragile]
\begin{figure}
\includegraphics[width=3.5in]{data/straightline.png}
\end{figure}
\alert{Is this what you have?}
\end{frame}

\begin{frame}[fragile]
\frametitle{Plotting points}
\begin{itemize}
\item What if we want to plot the points!
\end{itemize}
\begin{lstlisting}
  In []: clf()

  In []: plot(x, y, 'o')
  Out[]: [<matplotlib.lines.Line2D object at 0xac17e0c>]

  In []: clf()
  In []: plot(x, y, '.')
  Out[]: [<matplotlib.lines.Line2D object at 0xac17e0c>]
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\begin{figure}
\includegraphics[width=2in]{data/stline_dots.png}
\includegraphics[width=2in]{data/stline_points.png}
\end{figure}
\end{frame}

\begin{frame}[fragile]
\frametitle{Additional Plotting Attributes}
\begin{itemize}
  \item \kwrd{'o'} - Filled circles
  \item \kwrd{'.'} - Small Dots
  \item \kwrd{'-'} - Lines
  \item \kwrd{'- -'} - Dashed lines
\end{itemize}
\end{frame}

\section{Lists}
\begin{frame}[fragile]
  \frametitle{Lists: Introduction}
  \begin{lstlisting}
    In []: x = [0, 1, 2, 3]

    In []: y = [7, 11, 15, 19]

  \end{lstlisting}
What are \typ{x} and \typ{y}?\\
\begin{center}
\alert{\typ{lists!!}}
\end{center}
\end{frame}

\begin{frame}[fragile]
\frametitle{Lists: Initializing \& accessing elements}
\begin{lstlisting}
In []: mtlist = [] 
\end{lstlisting}
\emphbar{Empty List}
\begin{lstlisting}
In []: a = [ 1, 2, 3, 4, 5] 

In []: a[0]+a[1]+a[-1]
Out[]: 8
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
  \frametitle{List: Slicing}
  \begin{block}{Remember\ldots}
	\kwrd{In []: a = [ 1, 2, 3, 4, 5]}
  \end{block}
\begin{lstlisting}
In []: a[1:3]
Out[]: [2, 3]
\end{lstlisting}
\emphbar{A slice}
\begin{lstlisting}
In []: a[1:-1]
Out[]: [2, 3, 4]
\end{lstlisting}
\alert{\typ{list[initial:final]}}
\end{frame}

%% more on list slicing
\begin{frame}[fragile]
\frametitle{List operations}
\begin{lstlisting}
In []: b = [ 6, 7, 8, 9]
In []: c = a + b

In []: c
Out[]: [1, 2, 3, 4, 5, 6, 7, 8, 9]

In []: a.append(6)
In []: a
Out[]: [ 1, 2, 3, 4, 5, 6]
\end{lstlisting}
%\inctime{10}
\end{frame}

\section{Simple Pendulum}
\begin{frame}[fragile]
\frametitle{Simple Pendulum - L and T}
Let us look at the Simple Pendulum experiment.
\begin{center}
\begin{small}
\begin{tabular}{| c | c | c |}
\hline
$L$ & $T$ & $T^2$ \\ \hline
0.1 & 0.69 & \\ \hline
0.2 & 0.90 & \\ \hline
0.3 & 1.19 & \\ \hline
0.4 & 1.30 & \\ \hline
0.5 & 1.47 & \\ \hline
0.6 & 1.58 & \\ \hline
0.7 & 1.77 & \\ \hline
0.8 & 1.83 & \\ \hline
0.9 & 1.94 & \\ \hline
\end{tabular}
\end{small}\\
\alert{$L \alpha T^2$}
\end{center}
\end{frame}

\begin{frame}[fragile]
\frametitle{Lets use lists}
\begin{lstlisting}
In []: l = [0.1, 0.2, 0.3, 0.4, 0.5, 
            0.6, 0.7, 0.8, 0.9]

In []: t = [0.69, 0.90, 1.19, 
            1.30, 1.47, 1.58, 
            1.77, 1.83, 1.94]
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\frametitle{Plotting $L$ vs $T^2$}
\begin{itemize}
\item We must square each of the values in \typ{t}
\item How to do it?
\item We use a \kwrd{for} loop to iterate over \typ{t}
\end{itemize}
\end{frame}

\begin{frame}[fragile]
\frametitle{Plotting $L$ vs $T^2$}
\begin{lstlisting}
In []: tsq = []

In []: for time in t:
 ....:     tsq.append(time*time)
 ....:
 ....:

In []: plot(l, tsq)
Out[]: [<matplotlib.lines.Line2D object at 0xa5b05ac>]
\end{lstlisting}
This gives \kwrd{tsq} which is the list of squares of \typ{t} values.
\end{frame}

\begin{frame}[fragile]
  \frametitle{How to come out of the \texttt{for} loop?}
  Hit the ``ENTER'' key twice to return to the previous indentation level
  \begin{lstlisting}
    In []: for time in t:
     ....:     tsq.append(time*time)
     ....:     
     ....:     

    In []: print tsq
  \end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\begin{figure}
\includegraphics[width=3.5in]{data/L-TSq-limited.png}
\end{figure}
\end{frame}

\begin{frame}[fragile]
\frametitle{What about larger data sets?}
\alert{Data is usually present in a file!} \\
Lets look at the \typ{pendulum.txt} file.
\begin{lstlisting} 
$ cat pendulum.txt 
1.0000e-01 6.9004e-01
1.1000e-01 6.9497e-01
1.2000e-01 7.4252e-01
1.3000e-01 7.5360e-01
1.4000e-01 8.3568e-01
1.5000e-01 8.6789e-01
\end{lstlisting}  %$
\ldots
\begin{block}{Windows users:}
  C:> type pendulum.txt
\end{block}
\end{frame}

\begin{frame}[fragile]
\frametitle{Reading \typ{pendulum.txt}}
\begin{itemize}
  \item Let us generate a plot from the data file
  \item File contains L vs. T values 
  \item L - Column1; T - Column2
\end{itemize}
\end{frame}

\begin{frame}[fragile]
\frametitle{Plotting from \typ{pendulum.txt}}
Open a new script and type the following:
\begin{lstlisting}
l = []
t = []
for line in open('pendulum.txt'):
    point = line.split()
    l.append(float(point[0]))
    t.append(float(point[1]))
tsq = []
for time in t:
    tsq.append(time*time)
plot(l, tsq, '.')
\end{lstlisting}
\end{frame}

\begin{frame}
\frametitle{Save and run}
\begin{itemize}
  \item Save as pendulum\_plot.py.
  \item Run using \kwrd{\%run -i pendulum\_plot.py}
\end{itemize}
\end{frame}

\begin{frame}[fragile]
\begin{figure}
\includegraphics[width=3.5in]{data/L-Tsq.png}
\end{figure}
\end{frame}

\begin{frame}[fragile]
  \frametitle{Reading files \ldots}
\typ{for line in open('pendulum.txt'):}
\begin{itemize}
\item opening file `\typ{pendulum.txt}'
\item reading the file line by line
\item \typ{line} is a \kwrd{string}
\end{itemize}
\end{frame}

\section{Strings}
\begin{frame}[fragile]
\frametitle{Strings}
Anything within ``quotes'' is a string!
\begin{lstlisting}
' This is a string '  
" This too! "
""" This one too! """
''' And one more! '''
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\frametitle{Strings and \typ{split()}}
  \begin{lstlisting}
In []: greet = 'hello world'

In []: greet.split()
Out[]: ['hello', 'world']
  \end{lstlisting}
This is what happens with \typ{line}
  \begin{lstlisting}
In []: line = '1.20 7.42'

In []: point = line.split()

In []: point
Out[]: ['1.20', '7.42']
  \end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\frametitle{Getting floats from strings}
  \begin{lstlisting}
In []: type(point[0])
Out[]: <type 'str'>
  \end{lstlisting}
But, we need floating point numbers
  \begin{lstlisting}
In []: t = float(point[0])

In []: type(t)
Out[]: <type 'float'>
  \end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\frametitle{Let's review the code}
\begin{lstlisting}
l = []
t = []
for line in open('pendulum.txt'):
    point = line.split()
    l.append(float(point[0]))
    t.append(float(point[1]))
tsq = []
for time in t:
    tsq.append(time*time)
plot(l, tsq, '.')
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\begin{figure}
\includegraphics[width=3.5in]{data/L-Tsq.png}
\end{figure}
\end{frame}

\section {Summary}
\begin{frame}[fragile]
\frametitle{What did we learn?}
\begin{itemize}
  \item Plotting points
  \item Plot attributes
  \item Lists
  \item \kwrd{for}
  \item Reading files
  \item Tokenizing
  \item Strings
\end{itemize}
\end{frame}

\end{document}

%% Questions for Quiz %%
%% ------------------ %%

\begin{frame}[fragile]
\frametitle{\incqno }
  \begin{lstlisting}
  In []: a = [1, 2, 5, 9]
  In []: a[0:-1]
  \end{lstlisting}
  What is the output?
\end{frame}

\begin{frame}
\frametitle{\incqno }
  How do you combine two lists \emph{a} and \emph{b} to produce one list?
\end{frame}

\begin{frame}[fragile]
\frametitle{\incqno }
  \begin{lstlisting}
  In []: a = [1, 2, 5, 9]
  \end{lstlisting}
  How do you add the value 10 to the end of this list?
\end{frame}

\begin{frame}
\frametitle{\incqno }
Write the code to read a file \texttt{data.txt} and print each line of it?
\end{frame}

\begin{frame}[fragile]
\frametitle{\incqno }
What would be the result of the following code snippet:
\begin{lstlisting}
In []: x = linspace(0, 10, 50)
In []: y = linspace(50, 100, 100)
In []: plot(x, y)
\end{lstlisting}
\end{frame}

\begin{frame}[fragile]
\frametitle{\incqno }
The following code snippet has an error/bug:
\begin{lstlisting}
In []: l = [0.1, 0.2, 0.3, 0.4]
In []: t = [0.69, 0.90, 1.19, 1.30]
In []: tsq = []
In []: for time in t:
 ....:     tsq.append(time*time)
 ....:     plot(l, tsq)
\end{lstlisting}
What is the error? How do you fix it?
\end{frame}
