Examples
-AVRPWM0Setup(2,0); //This function will select CTC waveform mode and will clear OC0 on compare match |  |  |
Function to Setup OC0 pin for required PWM mode
integer, from 0 to 2
integer, from 0 to 1 (or 2) depending on the waveform_mode
Every Micro controller has PWM pins which can generate varying voltages -from 0V-5V.This function helps to use OC0 pin to produce required -output waveform by setting the waveform mode and otput mode.
-waveform_mode can take values- -
0 -> for Phase correct PWM Mode
1 -> for Fast PWM Mode
2 -> for CTC Mode
output_mode can take values- -
0 for Clear OC0 on compare match when up-counting. Set OC0 on compare match when down-counting.
1 for Set OC0 on compare match when up-counting. Clear OC0 on compare match when down-counting.
0 for non-inverted output i.e Clear OC0 on compare match, set OC0 at BOTTOM.
1 for inverted output i.e Set OC0 on compare match, clear OC0 at BOTTOM.
0 to Clear OC0 on compare match
1 to Set OC0 on compare match
2 to toggle OC0 on compare match
This is curretly dummy function. It provides no functionality but is required -for providing support for generating C code for AVR.
-AVRPWM0Setup(2,0); //This function will select CTC waveform mode and will clear OC0 on compare match | | |