// // Copyright 2008,2009 Free Software Foundation, Inc. // // This file is part of GNU Radio // // GNU Radio is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation; either asversion 3, or (at your option) // any later version. // // GNU Radio is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with GNU Radio; see the file COPYING. If not, write to // the Free Software Foundation, Inc., 51 Franklin Street, // Boston, MA 02110-1301, USA. #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include // d'board i/o pin defs // Tx and Rx have shared defs, but different i/o regs #define AUX_RXAGC (1 << 8) #define POWER_UP (1 << 7) // enables power supply #define RX_TXN (1 << 6) // Tx only: T/R antenna switch for TX/RX port #define RX2_RX1N (1 << 6) // Rx only: antenna switch between RX2 and TX/RX port #define ENABLE (1 << 5) // enables mixer #define AUX_SEN (1 << 4) #define AUX_SCLK (1 << 3) #define PLL_LOCK_DETECT (1 << 2) #define AUX_SDO (1 << 1) #define CLOCK_OUT (1 << 0) flexrf_base::flexrf_base(usrp_basic_sptr _usrp, int which, int _power_on) : db_base(_usrp, which), d_power_on(_power_on) { /* @param usrp: instance of usrp.source_c @param which: which side: 0 or 1 corresponding to side A or B respectively @type which: int */ d_first = true; d_spi_format = SPI_FMT_MSB | SPI_FMT_HDR_0; usrp()->_write_oe(d_which, 0, 0xffff); // turn off all outputs _enable_refclk(false); // disable refclk set_auto_tr(false); } flexrf_base::~flexrf_base() { delete d_common; } void flexrf_base::_write_all(int R, int control, int N) { /* Write R counter latch, control latch and N counter latch to VCO. Adds 10ms delay between writing control and N if this is first call. This is the required power-up sequence. @param R: 24-bit R counter latch @type R: int @param control: 24-bit control latch @type control: int @param N: 24-bit N counter latch @type N: int */ timespec t; t.tv_sec = 0; t.tv_nsec = 10000000; _write_R(R); _write_control(control); if(d_first) { //time.sleep(0.010); nanosleep(&t, NULL); d_first = false; } _write_N(N); } void flexrf_base::_write_control(int control) { _write_it((control & ~0x3) | 0); } void flexrf_base::_write_R(int R) { _write_it((R & ~0x3) | 1); } void flexrf_base::_write_N(int N) { _write_it((N & ~0x3) | 2); } void flexrf_base::_write_it(int v) { char s[3]; s[0] = (char)((v >> 16) & 0xff); s[1] = (char)((v >> 8) & 0xff); s[2] = (char)(v & 0xff); std::string str(s, 3); usrp()->_write_spi(0, d_spi_enable, d_spi_format, str); } bool flexrf_base::_lock_detect() { /* @returns: the value of the VCO/PLL lock detect bit. @rtype: 0 or 1 */ if(usrp()->read_io(d_which) & PLL_LOCK_DETECT) { return true; } else { // Give it a second chance // FIXME: make portable sleep timespec t; t.tv_sec = 0; t.tv_nsec = 100000000; nanosleep(&t, NULL); if(usrp()->read_io(d_which) & PLL_LOCK_DETECT) { return true; } else { return false; } } } bool flexrf_base::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { /* Determine values of R, control, and N registers, along with actual freq. @param freq: target frequency in Hz @type freq: float @returns: (R, control, N, actual_freq) @rtype: tuple(int, int, int, float) Override this in derived classes. */ //raise NotImplementedError; throw std::runtime_error("_compute_regs called from flexrf_base\n"); } int flexrf_base::_compute_control_reg() { return d_common->_compute_control_reg(); } int flexrf_base::_refclk_divisor() { return d_common->_refclk_divisor(); } struct freq_result_t flexrf_base::set_freq(double freq) { /* @returns (ok, actual_baseband_freq) where: ok is True or False and indicates success or failure, actual_baseband_freq is the RF frequency that corresponds to DC in the IF. */ struct freq_result_t args = {false, 0}; // Offsetting the LO helps get the Tx carrier leakage out of the way. // This also ensures that on Rx, we're not getting hosed by the // FPGA's DC removal loop's time constant. We were seeing a // problem when running with discontinuous transmission. // Offsetting the LO made the problem go away. freq += d_lo_offset; int R, control, N; double actual_freq; _compute_regs(freq, R, control, N, actual_freq); if(R==0) { return args; } _write_all(R, control, N); args.ok = _lock_detect(); args.baseband_freq = actual_freq; return args; } bool flexrf_base::_set_pga(float pga_gain) { if(d_which == 0) { usrp()->set_pga(0, pga_gain); usrp()->set_pga(1, pga_gain); } else { usrp()->set_pga(2, pga_gain); usrp()->set_pga(3, pga_gain); } return true; } bool flexrf_base::is_quadrature() { /* Return True if this board requires both I & Q analog channels. This bit of info is useful when setting up the USRP Rx mux register. */ return true; } double flexrf_base::freq_min() { return d_common->freq_min(); } double flexrf_base::freq_max() { return d_common->freq_max(); } // ---------------------------------------------------------------- flexrf_base_tx::flexrf_base_tx(usrp_basic_sptr _usrp, int which, int _power_on) : flexrf_base(_usrp, which, _power_on) { /* @param usrp: instance of usrp.sink_c @param which: 0 or 1 corresponding to side TX_A or TX_B respectively. */ if(which == 0) { d_spi_enable = SPI_ENABLE_TX_A; } else { d_spi_enable = SPI_ENABLE_TX_B; } // power up the transmit side, but don't enable the mixer usrp()->_write_oe(d_which,(POWER_UP|RX_TXN|ENABLE), 0xffff); usrp()->write_io(d_which, (power_on()|RX_TXN), (POWER_UP|RX_TXN|ENABLE)); set_lo_offset(4e6); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } flexrf_base_tx::~flexrf_base_tx() { shutdown(); } void flexrf_base_tx::shutdown() { // fprintf(stderr, "flexrf_base_tx::shutdown d_is_shutdown = %d\n", d_is_shutdown); if (!d_is_shutdown){ d_is_shutdown = true; // do whatever there is to do to shutdown // Power down and leave the T/R switch in the R position usrp()->write_io(d_which, (power_off()|RX_TXN), (POWER_UP|RX_TXN|ENABLE)); // Power down VCO/PLL d_PD = 3; _write_control(_compute_control_reg()); _enable_refclk(false); // turn off refclk set_auto_tr(false); } } bool flexrf_base_tx::set_auto_tr(bool on) { bool ok = true; if(on) { ok &= set_atr_mask (RX_TXN | ENABLE); ok &= set_atr_txval(0 | ENABLE); ok &= set_atr_rxval(RX_TXN | 0); } else { ok &= set_atr_mask (0); ok &= set_atr_txval(0); ok &= set_atr_rxval(0); } return ok; } bool flexrf_base_tx::set_enable(bool on) { /* Enable transmitter if on is true */ int v; int mask = RX_TXN | ENABLE; if(on) { v = ENABLE; } else { v = RX_TXN; } return usrp()->write_io(d_which, v, mask); } float flexrf_base_tx::gain_min() { return usrp()->pga_max(); } float flexrf_base_tx::gain_max() { return usrp()->pga_max(); } float flexrf_base_tx::gain_db_per_step() { return 1; } bool flexrf_base_tx::set_gain(float gain) { /* Set the gain. @param gain: gain in decibels @returns True/False */ return _set_pga(usrp()->pga_max()); } /**************************************************************************/ flexrf_base_rx::flexrf_base_rx(usrp_basic_sptr _usrp, int which, int _power_on) : flexrf_base(_usrp, which, _power_on) { /* @param usrp: instance of usrp.source_c @param which: 0 or 1 corresponding to side RX_A or RX_B respectively. */ if(which == 0) { d_spi_enable = SPI_ENABLE_RX_A; } else { d_spi_enable = SPI_ENABLE_RX_B; } usrp()->_write_oe(d_which, (POWER_UP|RX2_RX1N|ENABLE), 0xffff); usrp()->write_io(d_which, (power_on()|RX2_RX1N|ENABLE), (POWER_UP|RX2_RX1N|ENABLE)); // set up for RX on TX/RX port select_rx_antenna("TX/RX"); bypass_adc_buffers(true); set_lo_offset(-4e6); } flexrf_base_rx::~flexrf_base_rx() { shutdown(); } void flexrf_base_rx::shutdown() { // fprintf(stderr, "flexrf_base_rx::shutdown d_is_shutdown = %d\n", d_is_shutdown); if (!d_is_shutdown){ d_is_shutdown = true; // do whatever there is to do to shutdown // Power down usrp()->common_write_io(C_RX, d_which, power_off(), (POWER_UP|ENABLE)); // Power down VCO/PLL d_PD = 3; // fprintf(stderr, "flexrf_base_rx::shutdown before _write_control\n"); _write_control(_compute_control_reg()); // fprintf(stderr, "flexrf_base_rx::shutdown before _enable_refclk\n"); _enable_refclk(false); // turn off refclk // fprintf(stderr, "flexrf_base_rx::shutdown before set_auto_tr\n"); set_auto_tr(false); // fprintf(stderr, "flexrf_base_rx::shutdown after set_auto_tr\n"); } } bool flexrf_base_rx::set_auto_tr(bool on) { bool ok = true; if(on) { ok &= set_atr_mask (ENABLE); ok &= set_atr_txval( 0); ok &= set_atr_rxval(ENABLE); } else { ok &= set_atr_mask (0); ok &= set_atr_txval(0); ok &= set_atr_rxval(0); } return true; } bool flexrf_base_rx::select_rx_antenna(int which_antenna) { /* Specify which antenna port to use for reception. @param which_antenna: either 'TX/RX' or 'RX2' */ if(which_antenna == 0) { usrp()->write_io(d_which, 0,RX2_RX1N); } else if(which_antenna == 1) { usrp()->write_io(d_which, RX2_RX1N, RX2_RX1N); } else { return false; // throw std::invalid_argument("which_antenna must be either 'TX/RX' or 'RX2'\n"); } return true; } bool flexrf_base_rx::select_rx_antenna(const std::string &which_antenna) { /* Specify which antenna port to use for reception. @param which_antenna: either 'TX/RX' or 'RX2' */ if(which_antenna == "TX/RX") { usrp()->write_io(d_which, 0, RX2_RX1N); } else if(which_antenna == "RX2") { usrp()->write_io(d_which, RX2_RX1N, RX2_RX1N); } else { // throw std::invalid_argument("which_antenna must be either 'TX/RX' or 'RX2'\n"); return false; } return true; } bool flexrf_base_rx::set_gain(float gain) { /* Set the gain. @param gain: gain in decibels @returns True/False */ // clamp gain gain = std::max(gain_min(), std::min(gain, gain_max())); float pga_gain, agc_gain; float V_maxgain, V_mingain, V_fullscale, dac_value; float maxgain = gain_max() - usrp()->pga_max(); float mingain = gain_min(); if(gain > maxgain) { pga_gain = gain-maxgain; assert(pga_gain <= usrp()->pga_max()); agc_gain = maxgain; } else { pga_gain = 0; agc_gain = gain; } V_maxgain = .2; V_mingain = 1.2; V_fullscale = 3.3; dac_value = (agc_gain*(V_maxgain-V_mingain)/(maxgain-mingain) + V_mingain)*4096/V_fullscale; assert(dac_value>=0 && dac_value<4096); return (usrp()->write_aux_dac(d_which, 0, int(dac_value)) && _set_pga(int(pga_gain))); } // ---------------------------------------------------------------- _AD4360_common::_AD4360_common() { // R-Register Common Values d_R_RSV = 0; // bits 23,22 d_BSC = 3; // bits 21,20 Div by 8 to be safe d_TEST = 0; // bit 19 d_LDP = 1; // bit 18 d_ABP = 0; // bit 17,16 3ns // N-Register Common Values d_N_RSV = 0; // bit 7 // Control Register Common Values d_PD = 0; // bits 21,20 Normal operation d_PL = 0; // bits 13,12 11mA d_MTLD = 1; // bit 11 enabled d_CPG = 0; // bit 10 CP setting 1 d_CP3S = 0; // bit 9 Normal d_PDP = 1; // bit 8 Positive d_MUXOUT = 1; // bits 7:5 Digital Lock Detect d_CR = 0; // bit 4 Normal d_PC = 1; // bits 3,2 Core power 10mA } _AD4360_common::~_AD4360_common() { } bool _AD4360_common::_compute_regs(double refclk_freq, double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { /* Determine values of R, control, and N registers, along with actual freq. @param freq: target frequency in Hz @type freq: float @returns: (R, control, N, actual_freq) @rtype: tuple(int, int, int, float) */ // Band-specific N-Register Values //float phdet_freq = _refclk_freq()/d_R_DIV; double phdet_freq = refclk_freq/d_R_DIV; double desired_n = round(freq*d_freq_mult/phdet_freq); double actual_freq = desired_n * phdet_freq; int B = floor(desired_n/_prescaler()); int A = desired_n - _prescaler()*B; d_B_DIV = int(B); // bits 20:8 d_A_DIV = int(A); // bit 6:2 //assert db_B_DIV >= db_A_DIV if(d_B_DIV < d_A_DIV) { retR = 0; retcontrol = 0; retN = 0; retfreq = 0; return false; } int R = (d_R_RSV<<22) | (d_BSC<<20) | (d_TEST<<19) | (d_LDP<<18) | (d_ABP<<16) | (d_R_DIV<<2); int control = _compute_control_reg(); int N = (d_DIVSEL<<23) | (d_DIV2<<22) | (d_CPGAIN<<21) | (d_B_DIV<<8) | (d_N_RSV<<7) | (d_A_DIV<<2); retR = R; retcontrol = control; retN = N; retfreq = actual_freq/d_freq_mult; return true; } int _AD4360_common::_compute_control_reg() { int control = (d_P<<22) | (d_PD<<20) | (d_CP2<<17) | (d_CP1<<14) | (d_PL<<12) | (d_MTLD<<11) | (d_CPG<<10) | (d_CP3S<<9) | (d_PDP<<8) | (d_MUXOUT<<5) | (d_CR<<4) | (d_PC<<2); return control; } int _AD4360_common::_refclk_divisor() { /* Return value to stick in REFCLK_DIVISOR register */ return 1; } int _AD4360_common::_prescaler() { if(d_P == 0) { return 8; } else if(d_P == 1) { return 16; } else { return 32; } } //---------------------------------------------------------------------- _2200_common::_2200_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 // Band-specific C-Register values d_P = 1; // bits 23,22 Div by 16/17 d_CP2 = 7; // bits 19:17 d_CP1 = 7; // bits 16:14 // Band specifc N-Register Values d_DIVSEL = 0; // bit 23 d_DIV2 = 0; // bit 22 d_CPGAIN = 0; // bit 21 d_freq_mult = 1; } double _2200_common::freq_min() { return 2000e6; } double _2200_common::freq_max() { return 2400e6; } //---------------------------------------------------------------------- _2400_common::_2400_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 // Band-specific C-Register values d_P = 1; // bits 23,22 Div by 16/17 d_CP2 = 7; // bits 19:17 d_CP1 = 7; // bits 16:14 // Band specifc N-Register Values d_DIVSEL = 0; // bit 23 d_DIV2 = 0; // bit 22 d_CPGAIN = 0; // bit 21 d_freq_mult = 1; } double _2400_common::freq_min() { return 2300e6; } double _2400_common::freq_max() { return 2900e6; } //---------------------------------------------------------------------- _1200_common::_1200_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 DIV by 16 for a 1 MHz phase detector freq // Band-specific C-Register values d_P = 1; // bits 23,22 Div by 16/17 d_CP2 = 7; // bits 19:17 1.25 mA d_CP1 = 7; // bits 16:14 1.25 mA // Band specifc N-Register Values d_DIVSEL = 0; // bit 23 d_DIV2 = 1; // bit 22 d_CPGAIN = 0; // bit 21 d_freq_mult = 2; } double _1200_common::freq_min() { return 1150e6; } double _1200_common::freq_max() { return 1450e6; } //------------------------------------------------------------------------- _1800_common::_1800_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 DIV by 16 for a 1 MHz phase detector freq // Band-specific C-Register values d_P = 1; // bits 23,22 Div by 16/17 d_CP2 = 7; // bits 19:17 1.25 mA d_CP1 = 7; // bits 16:14 1.25 mA // Band specifc N-Register Values d_DIVSEL = 0; // bit 23 d_DIV2 = 0; // bit 22 d_freq_mult = 1; d_CPGAIN = 0; // bit 21 } double _1800_common::freq_min() { return 1500e6; } double _1800_common::freq_max() { return 2100e6; } //------------------------------------------------------------------------- _900_common::_900_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 DIV by 16 for a 1 MHz phase detector freq // Band-specific C-Register values d_P = 1; // bits 23,22 Div by 16/17 d_CP2 = 7; // bits 19:17 1.25 mA d_CP1 = 7; // bits 16:14 1.25 mA // Band specifc N-Register Values d_DIVSEL = 0; // bit 23 d_DIV2 = 1; // bit 22 d_freq_mult = 2; d_CPGAIN = 0; // bit 21 } double _900_common::freq_min() { return 750e6; } double _900_common::freq_max() { return 1050e6; } //------------------------------------------------------------------------- _400_common::_400_common() : _AD4360_common() { // Band-specific R-Register Values d_R_DIV = 16; // bits 15:2 // Band-specific C-Register values d_P = 0; // bits 23,22 Div by 8/9 d_CP2 = 7; // bits 19:17 1.25 mA d_CP1 = 7; // bits 16:14 1.25 mA // Band specifc N-Register Values These are different for TX/RX d_DIVSEL = 0; // bit 23 d_freq_mult = 2; d_CPGAIN = 0; // bit 21 } double _400_common::freq_min() { return 400e6; } double _400_common::freq_max() { return 500e6; } _400_tx::_400_tx() : _400_common() { d_DIV2 = 1; // bit 22 } _400_rx::_400_rx() : _400_common() { d_DIV2 = 0; // bit 22 // RX side has built-in DIV2 in AD8348 } //------------------------------------------------------------ db_flexrf_2200_tx::db_flexrf_2200_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which) { d_common = new _2200_common(); } db_flexrf_2200_tx::~db_flexrf_2200_tx() { } bool db_flexrf_2200_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_2200_rx::db_flexrf_2200_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which) { d_common = new _2200_common(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_2200_rx::~db_flexrf_2200_rx() { } float db_flexrf_2200_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_2200_rx::gain_max() { return usrp()->pga_max()+70; } float db_flexrf_2200_rx::gain_db_per_step() { return 0.05; } bool db_flexrf_2200_rx::i_and_q_swapped() { return true; } bool db_flexrf_2200_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } //------------------------------------------------------------ db_flexrf_2400_tx::db_flexrf_2400_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which) { d_common = new _2400_common(); } db_flexrf_2400_tx::~db_flexrf_2400_tx() { } bool db_flexrf_2400_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_2400_rx::db_flexrf_2400_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which) { d_common = new _2400_common(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_2400_rx::~db_flexrf_2400_rx() { } float db_flexrf_2400_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_2400_rx::gain_max() { return usrp()->pga_max()+70; } float db_flexrf_2400_rx::gain_db_per_step() { return 0.05; } bool db_flexrf_2400_rx::i_and_q_swapped() { return true; } bool db_flexrf_2400_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } //------------------------------------------------------------ db_flexrf_1200_tx::db_flexrf_1200_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which) { d_common = new _1200_common(); } db_flexrf_1200_tx::~db_flexrf_1200_tx() { } bool db_flexrf_1200_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_1200_rx::db_flexrf_1200_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which) { d_common = new _1200_common(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_1200_rx::~db_flexrf_1200_rx() { } float db_flexrf_1200_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_1200_rx::gain_max() { return usrp()->pga_max()+70; } float db_flexrf_1200_rx::gain_db_per_step() { return 0.05; } bool db_flexrf_1200_rx::i_and_q_swapped() { return true; } bool db_flexrf_1200_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } //------------------------------------------------------------ db_flexrf_1800_tx::db_flexrf_1800_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which) { d_common = new _1800_common(); } db_flexrf_1800_tx::~db_flexrf_1800_tx() { } bool db_flexrf_1800_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_1800_rx::db_flexrf_1800_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which) { d_common = new _1800_common(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_1800_rx::~db_flexrf_1800_rx() { } float db_flexrf_1800_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_1800_rx::gain_max() { return usrp()->pga_max()+70; } float db_flexrf_1800_rx::gain_db_per_step() { return 0.05; } bool db_flexrf_1800_rx::i_and_q_swapped() { return true; } bool db_flexrf_1800_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } //------------------------------------------------------------ db_flexrf_900_tx::db_flexrf_900_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which) { d_common = new _900_common(); } db_flexrf_900_tx::~db_flexrf_900_tx() { } bool db_flexrf_900_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_900_rx::db_flexrf_900_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which) { d_common = new _900_common(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_900_rx::~db_flexrf_900_rx() { } float db_flexrf_900_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_900_rx::gain_max() { return usrp()->pga_max()+70; } float db_flexrf_900_rx::gain_db_per_step() { return 0.05; } bool db_flexrf_900_rx::i_and_q_swapped() { return true; } bool db_flexrf_900_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } //------------------------------------------------------------ db_flexrf_400_tx::db_flexrf_400_tx(usrp_basic_sptr usrp, int which) : flexrf_base_tx(usrp, which, POWER_UP) { d_common = new _400_tx(); } db_flexrf_400_tx::~db_flexrf_400_tx() { } bool db_flexrf_400_tx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); } db_flexrf_400_rx::db_flexrf_400_rx(usrp_basic_sptr usrp, int which) : flexrf_base_rx(usrp, which, POWER_UP) { d_common = new _400_rx(); set_gain((gain_min() + gain_max()) / 2.0); // initialize gain } db_flexrf_400_rx::~db_flexrf_400_rx() { } float db_flexrf_400_rx::gain_min() { return usrp()->pga_min(); } float db_flexrf_400_rx::gain_max() { return usrp()->pga_max()+45; } float db_flexrf_400_rx::gain_db_per_step() { return 0.035; } bool db_flexrf_400_rx::i_and_q_swapped() { return true; } bool db_flexrf_400_rx::_compute_regs(double freq, int &retR, int &retcontrol, int &retN, double &retfreq) { return d_common->_compute_regs(_refclk_freq(), freq, retR, retcontrol, retN, retfreq); }