/* -*- c++ -*- */ /* * Copyright 2003 Free Software Foundation, Inc. * * This file is part of GNU Radio * * GNU Radio is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * GNU Radio is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with GNU Radio; see the file COPYING. If not, write to * the Free Software Foundation, Inc., 51 Franklin Street, * Boston, MA 02110-1301, USA. */ #ifndef _SYNCDELAY_H_ #define _SYNCDELAY_H_ /* * Magic delay required between access to certain xdata registers (TRM page 15-106). * For our configuration, 48 MHz FX2 / 48 MHz IFCLK, we need three cycles. Each * NOP is a single cycle.... * * From TRM page 15-105: * * Under certain conditions, some read and write access to the FX2 registers must * be separated by a "synchronization delay". The delay is necessary only under the * following conditions: * * - between a write to any register in the 0xE600 - 0xE6FF range and a write to one * of the registers listed below. * * - between a write to one of the registers listed below and a read from any register * in the 0xE600 - 0xE6FF range. * * Registers which require a synchronization delay: * * FIFORESET FIFOPINPOLAR * INPKTEND EPxBCH:L * EPxFIFOPFH:L EPxAUTOINLENH:L * EPxFIFOCFG EPxGPIFFLGSEL * PINFLAGSAB PINFLAGSCD * EPxFIFOIE EPxFIFOIRQ * GPIFIE GPIFIRQ * UDMACRCH:L GPIFADRH:L * GPIFTRIG EPxGPIFTRIG * OUTPKTEND REVCTL * GPIFTCB3 GPIFTCB2 * GPIFTCB1 GPIFTCB0 */ /* * FIXME ensure that the peep hole optimizer isn't screwing us */ #define SYNCDELAY _asm nop; nop; nop; _endasm #define NOP _asm nop; _endasm #endif /* _SYNCDELAY_H_ */