#!/usr/bin/env python # # Copyright 2007 Free Software Foundation, Inc. # # This file is part of GNU Radio # # GNU Radio is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # GNU Radio is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Radio; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, # Boston, MA 02110-1301, USA. # from gnuradio import gr, usrp from gnuradio import eng_notation n2s = eng_notation.num_to_str #----------------------------------------------------------------------- # FPGA Register Definitions #----------------------------------------------------------------------- FR_RADAR_MODE = usrp.FR_USER_0 # Operational mode bmFR_RADAR_MODE_RESET = 1 << 0 # bit 0: active high reset #bmFR_RADAR_MODE_LP = 1 << 1 # bit 1: enable digital loopback #bmFR_RADAR_MODE_DR = 1 << 2 # bit 2: enable on-board deramping #bmFR_RADAR_MODE_MD = 1 << 3 # bit 3: enable echo metadata #bmFR_RADAR_MODE_CHIRPS = 3 << 4 # bit 4,5: number of chirp center frequencies FR_RADAR_TON = usrp.FR_USER_1 # 16-bit transmitter on time in clocks FR_RADAR_TSW = usrp.FR_USER_2 # 16-bit transmitter switch time in clocks FR_RADAR_TLOOK = usrp.FR_USER_3 # 16-bit receiver look time in clocks FR_RADAR_TIDLE = usrp.FR_USER_4 # 32-bit inter-pulse idle time FR_RADAR_AMPL = usrp.FR_USER_5 # 16-bit pulse amplitude (2s complement) into CORDIC FR_RADAR_FSTART = usrp.FR_USER_6 # 32-bit FTW for chirp start frequency FR_RADAR_FINCR = usrp.FR_USER_7 # 32-bit FTW increment per transmit clock # These are for phase II development #FR_RADAR_FREQ1N = usrp.FR_USER_8 # 24-bit N register for chirp #1 #FR_RADAR_FREQ1R = usrp.FR_USER_9 # 24-bit R register for chirp #1 #FR_RADAR_FREQ1C = usrp.FR_USER_10 # 24-bit control register for chirp #1 #FR_RADAR_FREQ2N = usrp.FR_USER_11 # 24-bit N register for chirp #2 #FR_RADAR_FREQ2R = usrp.FR_USER_12 # 24-bit R register for chirp #2 #FR_RADAR_FREQ2C = usrp.FR_USER_13 # 24-bit control register for chirp #2 #FR_RADAR_FREQ3N = usrp.FR_USER_14 # 24-bit N register for chirp #3 #FR_RADAR_FREQ3R = usrp.FR_USER_15 # 24-bit R register for chirp #3 #FR_RADAR_FREQ3C = usrp.FR_USER_16 # 24-bit control register for chirp #3 #FR_RADAR_FREQ4N = usrp.FR_USER_17 # 24-bit N register for chirp #4 #FR_RADAR_FREQ4R = usrp.FR_USER_18 # 24-bit R register for chirp #4 #FR_RADAR_FREQ4C = usrp.FR_USER_19 # 24-bit control register for chirp #4 #----------------------------------------------------------------------- # Transmitter object. Uses usrp_sink, but only for a handle to the # FPGA registers. #----------------------------------------------------------------------- class radar_tx: def __init__(self, verbose=False, debug=False): self._verbose = verbose self._debug = debug self._u = usrp.sink_s(fpga_filename='usrp_radar_mono.rbf') self._subdev_spec = (0,0); # FPGA code only implements side A self._subdev = usrp.selected_subdev(self._u, self._subdev_spec) self._subdev.set_lo_offset(0.0) self._ton_ticks = 0 self._tsw_ticks = 0 self._tlook_ticks = 0 self._tidle_ticks = 0 if self._verbose: print "Using", self._subdev.name(), "for radar transmitter." def set_ton(self, ton): self._ton_ticks = 2*(int(ton*64e6)/2)-1 # Even number, then subtract 1 if self._verbose: print "Setting pulse on time to", ton, " sec ("+`self._ton_ticks+1`+" ticks)" self._u._write_fpga_reg(FR_RADAR_TON, self._ton_ticks) def set_tsw(self, tsw): self._tsw_ticks = 2*(int(tsw*64e6)/2)-1 # Even number, then subtract 1 if self._verbose: print "Setting pulse switching time to", tsw, " sec ("+`self._tsw_ticks+1`+" ticks)" self._u._write_fpga_reg(FR_RADAR_TSW, self._tsw_ticks) def set_tlook(self, tlook): self._tlook_ticks = 2*(int(tlook*64e6)/2)-1 # Even number, then subtract 1 if self._verbose: print "Setting receiver look time to", tlook, " sec ("+`self._tlook_ticks+1`+" ticks)" self._u._write_fpga_reg(FR_RADAR_TLOOK, self._tlook_ticks) def set_prf(self, prf): period = 2*int(32e6/prf) self._tidle_ticks = period-(self._ton_ticks+self._tsw_ticks+self._tlook_ticks+3)-1 if self._verbose: print "Setting PRF to", prf, "Hz ("+`self._tidle_ticks+1`+" ticks idle time)" self._u._write_fpga_reg(FR_RADAR_TIDLE, self._tidle_ticks) def set_amplitude(self, ampl): self._amplitude = int(ampl*9946/100.0) # CORDIC gain correction if self._debug: print "Writing amplitude register with:", hex(self._amplitude) self._u._write_fpga_reg(FR_RADAR_AMPL, self._amplitude) def set_freq(self, center_freq, chirp_width): self._center_freq = center_freq self._chirp_width = chirp_width self._fstart = -int((chirp_width/2)*(2**32)/32e6) self._fincr = int((chirp_width/16e6)*(2**32)/(self._ton_ticks+1)) if self._verbose: print "Setting transmitter center frequency to", n2s(center_freq) print "Setting chirp width to", n2s(chirp_width), "Hz "+"("+hex(self._fstart)+", "+hex(self._fincr)+")" result = self._u.tune(0, self._subdev, center_freq) if result == False: raise RuntimeError("Failed to set transmitter frequency.") self._u._write_fpga_reg(FR_RADAR_FSTART, self._fstart) self._u._write_fpga_reg(FR_RADAR_FINCR, self._fincr) def start(self): self._u.start() self._subdev.set_enable(True) def stop(self): self._subdev.set_enable(False) self._u.stop() #----------------------------------------------------------------------- # Receiver object. Uses usrp_source_c to receive echo records. # NOT IMPLEMENTED YET #----------------------------------------------------------------------- """ class radar_rx: def __init__(self,gain=None,msgq=None,loopback=False,verbose=False,debug=False): self._gain = gain self._msgq = msgq self._loopback = loopback self._verbose = verbose self._debug = debug self._fg = gr.flow_graph() self._u = usrp.source_c(fpga_filename='usrp_radar.rbf') if not self._loopback: self._subdev_spec = (0,0) # FPGA only implements side A self._u.set_mux(usrp.determine_rx_mux_value(self._u, self._subdev_spec)) self._subdev = usrp.selected_subdev(self._u, self._subdev_spec) if self._verbose: print "Using", self._subdev.name(), "for radar receiver." self.set_gain(self._gain) # need to compute length here self._vblen = gr.sizeof_gr_complex*self._length if self._debug: print "Generating echo vectors of length", self._length, "byte length", self._vblen self._s2v = gr.stream_to_vector(gr.sizeof_gr_complex, self._length) self._sink = gr.message_sink(self._vblen, self._msgq, True) self._fg.connect(self._u, self._s2v, self._sink) def tune(self, frequency): if self._verbose: print "Setting receiver frequency to", n2s(frequency) result = self._u.tune(0, self._subdev, frequency) if result == False: raise RuntimeError("Failed to set receiver frequency.") def set_gain(self, gain): self._gain = gain if self._loopback: return if self._gain is None: # if no gain was specified, use the mid-point in dB g = self._subdev.gain_range() self._gain = float(g[0]+g[1])/2 if self._verbose: print "Setting receiver gain to", gain self._subdev.set_gain(self._gain) def start(self): if self._debug: print "Starting receiver flow graph." self._fg.start() def wait(self): if self._debug: print "Waiting for threads..." self._fg.wait() def stop(self): if self._debug: print "Stopping receiver flow graph." self._fg.stop() self.wait() if self._debug: print "Receiver flow graph stopped." """ class radar: def __init__(self,msgq=None,verbose=False,debug=False): self._msgq = msgq self._verbose = verbose self._debug = debug self._mode = 0 self._trans = radar_tx(verbose=self._verbose, debug=self._debug) self.set_reset(True) def _write_mode(self): if self._debug: print "Writing mode register with:", hex(self._mode) self._trans._u._write_fpga_reg(FR_RADAR_MODE, self._mode) def set_reset(self, value): if value: if self._debug: print "Asserting reset." self._mode |= bmFR_RADAR_MODE_RESET else: if self._debug: print "De-asserting reset." self._mode &= ~bmFR_RADAR_MODE_RESET self._write_mode() """ def set_loopback(self, value): if value: if self._verbose: print "Enabling digital loopback." self._mode |= bmFR_RADAR_MODE_LP else: if self._verbose: print "Disabling digital loopback." self._mode &= ~bmFR_RADAR_MODE_LP self._write_mode() """ def set_ton(self, ton): self._trans.set_ton(ton) def set_tsw(self, tsw): self._trans.set_tsw(tsw) def set_tlook(self, tlook): self._trans.set_tlook(tlook) def set_prf(self, prf): self._trans.set_prf(prf) def set_amplitude(self, ampl): self._trans.set_amplitude(ampl) def set_freq(self, center_freq, chirp_width): self._trans.set_freq(center_freq, chirp_width) # set receiver center frequency def start(self): self._trans.start() self.set_reset(False) def stop(self): self.set_reset(True) self._trans.stop() def __del__(self): self.stop()