From 9c31d118f7ad218d1dcd723562fe132138ab01d6 Mon Sep 17 00:00:00 2001
From: jcorgan
Date: Thu, 30 Jul 2009 21:54:38 +0000
Subject: Add custom FPGA build.

This is a custom build for USRP2 FPGA.  It allows using a BasicRX or
LFRX board and feed two independent, real signals.  In addition, instead
of the CIC/HB decimator, which optimizes frequency response, it uses an
integrate and dump decimator, which optimizes for time-domain impulse
response.

These changes have been made in dsp_core_rx.v:

* A second DDC has been added, sharing a frequency register with
  the existing DDC.

* The output of the two DDCs are interleaved as I1 Q1 I2 Q2I ...
  into the receive FIFO.  This limits the host configured decimation
  to 8 intead of 4.  Use gr.deinterleave to recover the streams.

* The ADCs are hardcoded:

  RX_A ==>  DDC #1 I-input
     0 ==>  DDC #1 Q-input
  RX_B ==>  DDC #2 I-input
     0 ==>  DDC #2 Q-input

  Thus, the input mux has been disabled.

* The CIC/HB decimator has been replaced by an integrate and dump at
  the decimation rate.

* To assist with meeting timing, the external RAM has been disabled.

The basic application is to coherently sample two real IF streams and
downconvert to baseband, while minimizing the impulse response duration
of the resampling filters.

git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@11519 221aa14e-8319-0410-a670-987f0aec2ac5
---
 usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v | 68 ++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v

(limited to 'usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v')

diff --git a/usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v b/usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v
new file mode 100644
index 000000000..fc5e3c1ed
--- /dev/null
+++ b/usrp2/fpga/top/u2_rev3_2rx_iad/impulse.v
@@ -0,0 +1,68 @@
+module impulse
+  (input clk,
+   input rst,
+   input ena,
+   
+   input [13:0] dc_offset_a,
+   input [13:0] dc_offset_b,
+   input [13:0] amplitude,
+   input [15:0] impulse_len,
+   input [15:0] zero_len,
+
+   output [13:0] adc_a,
+   output [13:0] adc_b,
+   output        adc_ovf_a,
+   output        adc_ovf_b
+   );
+
+   reg [13:0] adc_a_int = 0;
+   reg [13:0] adc_b_int = 0;
+   
+   reg [15:0] count;
+
+   localparam ST_ZERO = 0;
+   localparam ST_HIGH = 1;
+   reg 	      state;
+   
+   always @(posedge clk)
+     if (rst | ~ena)
+       begin
+	  adc_a_int <= 0;
+	  adc_b_int <= 0;
+	  count <= 0;
+	  state <= ST_ZERO;
+       end
+     else
+       case(state)
+	 ST_ZERO:
+	   if (count == zero_len)
+	     begin
+		adc_a_int <= amplitude;
+		adc_b_int <= amplitude >> 2;
+		state <= ST_HIGH;
+		count <= 0;
+	     end
+	   else
+	     count <= count + 1;
+
+	 ST_HIGH:
+	   if (count == impulse_len)
+	     begin
+		adc_a_int <= 0;
+		adc_b_int <= 0;
+		state <= ST_ZERO;
+		count <= 0;
+	     end
+	   else
+	     count <= count + 1;
+
+       endcase // case (state)
+
+   assign adc_a = adc_a_int + dc_offset_a;
+   assign adc_b = adc_b_int + dc_offset_b;
+
+   // Ignore for now
+   assign adc_ovf_a = 0;
+   assign adc_ovf_b = 0;
+
+endmodule // impulse
-- 
cgit