From 85b76dd55f422cf70238c58f2e39c2c28555f6ce Mon Sep 17 00:00:00 2001 From: jcorgan Date: Tue, 27 Jan 2009 18:00:05 +0000 Subject: General housekeeping--removing ancient cruft mostly. git-svn-id: http://gnuradio.org/svn/gnuradio/trunk@10315 221aa14e-8319-0410-a670-987f0aec2ac5 --- gr-usrp/AUTHORS | 1 - gr-usrp/ChangeLog | 374 ------------------------------------------------------ 2 files changed, 375 deletions(-) delete mode 100644 gr-usrp/AUTHORS delete mode 100644 gr-usrp/ChangeLog (limited to 'gr-usrp') diff --git a/gr-usrp/AUTHORS b/gr-usrp/AUTHORS deleted file mode 100644 index ee4560a55..000000000 --- a/gr-usrp/AUTHORS +++ /dev/null @@ -1 +0,0 @@ -Eric Blossom diff --git a/gr-usrp/ChangeLog b/gr-usrp/ChangeLog deleted file mode 100644 index 43cb7e157..000000000 --- a/gr-usrp/ChangeLog +++ /dev/null @@ -1,374 +0,0 @@ -2006-06-17 Eric Blossom - - * src/usrp.py, src/usrp1.i, src/usrp1_sink_base.cc, src/usrp1_sink_base.h, - src/usrp1_sink_c.cc, src/usrp1_sink_c.h, src/usrp1_sink_s.cc, - src/usrp1_sink_s.h, src/usrp1_source_base.cc, src/usrp1_source_base.h, - src/usrp1_source_c.cc, src/usrp1_source_c.h, src/usrp1_source_s.cc, - src/usrp1_source_s.h: changed constructor args to add - fusb_block_size and fusb_nblocks so that the application can - adjust the amount of buffering being done. [This was an awful lot - of files to have to touch to make this change. There must be an - easier way?] - - -2006-05-11 Martin Dudok van Heel - Added synchronised multi_usrp support. - This work was funded by Toby Oliver at Sensus Analytics / Path Intelligence. - - See README_MULTI_USRP.txt and the multi_usrp examples on how to use. - In short: - Connect the 64MHz clocks between the boards with a short sma coax cable. - (See the wiki on how to enable clock-out and clock-in - http://comsec.com/wiki?USRPClockingNotes ) - Connect io15 on the RXA daughterboards of both usrps - instantiate multi=usrp_multi.multi_source_align([args]) - The 4 aligned channels become available as: - (multi.get_master_source_c(),1) (multi.get_master_source_c(),2) - (multi.get_slave_source(),1) (multi.get_slave_source(),2) - call multi.sync() at least once AFTER the flowgraph has started running - - * READMU_MULTI_USRP.txt: new - * configure.ac: added missing newline at end of file - * src/Makefile.am: added usrp_multi.py - * src/usrp1.i: added _write_fpga_reg_masked - * src/usrp1_source_base.[cc,h]: added _write_fpga_reg_masked - * src/usrp_multi.py: new Instantiate a usrp_multi.multi_source_align to - get aligned streams from two usrps. - -2006-03-11 Matt Ettus - - * src/Makefile.am, src/db_flexrf_mimo.py, src/usrp.py: New skeleton - file for mimo mode with the flexrf boards - - * src/db_base.py: added standard code to control refclock and - adc buffer bypass so all dboards can do it the same way. Taken from - db_dbs_rx.py - - * src/db_tv_rx.py: Use standard method for adc buffer bypass - - * src/db_flexrf.py: Use standard method for adc buffer bypass - - * src/db_dbs_rx.py: Use standard methods for adc buffer bypass and - refclock control - - * src/db_basic.py: Use standard method for adc buffer bypass, - and instantiate a BasicTX when the unknown or missing board is on - the TX side - -2006-03-10 Eric Blossom - - * src/db_dbs_rx.py (db_dbs_rx._refclk_freq): replaced 64e6 with - call to fpga_master_clock_freq(). - -2006-02-18 Eric Blossom - - * src/usrp1_{sink,source}_{base,c,s}.{h,cc}, src/usrp1.i, - src/usrp.py: added support for specifying the firmware and fpga - files that are to be loaded. - -2006-02-17 Eric Blossom - - * src/usrp1.i, src/usrp1_{sink,source}_base.{h,cc}: added serial_number() - -2006-01-30 Eric Blossom - - * src/db_base.py, src/db_flexrf.py: revised to use new auto t/r - switching strategy. FR_ATR_CTL no longer exists. We control auto - t/r via the FR_ATR_MASK* registers. - -2006-01-25 Eric Blossom - - * src/usrp.py (usrp_common): added code to read FPGA capability register. - (determine_tx_mux_value): new utility. - -2006-01-22 Eric Blossom - - * src/usrp.py (pick_rx_subdevice): added latest d'board revs to list. - -2006-01-04 Eric Blossom - - * src/usrp1_{sink,source}_{s,c}.cc: added usrp_bytesex.h include and - use usrp_to_host_short or host_to_usrp_short as appropriate to - handle usrp to host endianness differences. - - * configure.ac: added AC_C_BIGENDIAN and header check for byteswap.h - -2005-12-20 Matt Ettus - - * src/db_base.py (db_base.spectrum_inverted): Base function - defaults to no spectrum inversion, so we can handle daughterboards - which have analog spectra which are inverted (currently only tvrx2) - - * src/db_tv_rx.py (db_tv_rx.spectrum_inverted): Report that the - tvrx2 has inverted spectrum, the tvrx does not - - * src/usrp.py (tune): Handle daughterboards which have analog - spectra which are inverted (currently only tvrx2) - - -2005-12-08 Eric Blossom - - * src/usrp1_sink_s.cc (usrp1_sink_s): call set_output_multiple so - we ensure 512 byte writes across USB. - -2005-12-07 Eric Blossom - - * src/usrp.py: revised sink_c, sink_s, source_c and source_s to - properly fire daughterboard destructors. Without this, we had the - nasty habit of leaving the transmitter running if the user didn't - explicitly disable it. - -2005-12-05 Eric Blossom - - * src/db_base.py, src/db_flexrf.py: refactored to use new - Auto T/R switching. - - * src/db_flexrf.py (flexrf_base.set_freq): Offset the LO by 4 MHz. - Helps initial lock-up time with discontinuous transmission. - -2005-11-22 Eric Blossom - - * src/db_base.py, src/db_flexrf.py: renamed set_auto_tx to set_auto_tr. - -2005-11-17 Eric Blossom - - * src/usrp1_sink_base.cc: reduced amount of USB Tx buffering. - -2005-11-13 Eric Blossom - - * src/db_base.py (db_base.set_auto_tx): new stub method. - -2005-11-11 Eric Blossom - - * src/usrp.py (pick_rx_subdevice): moved to library. - -2005-11-10 Matt Ettus - - * src/db_flexrf.py (flexrf_base_tx.set_enable): fixed definition. - -2005-10-27 Eric Blossom - - * src/db_base.py, src/db_flexrf.py: new method: set_enable - -2005-10-20 Eric Blossom - - * src/usrp1_source_s.{h,cc}, src/usrp1_source_c.{h,cc}: support - both 8 and 16-bit samples across the USB. - * src/usrp1.i, src/usrp1_source_base.{h,cc}: new methods for - setting and getting rx format. - -2005-10-11 Eric Blossom - - * src/usrp.py: removed dispatch on usrp revision (no longer - support rev0 boards). Constructors now take keyword args, thus - all args are optional. This will allow us to get rid of the 64e6's - and 128e6's that are scattered throughout the example code. - * src/usrp1.i: removed default values from constructors. They are - now provided by keyword args in usrp.py - -2005-09-29 Eric Blossom - - * src/db_dbs_rx.py (db_dbs_rx.freq_range): set freq step size to 1M - -2005-09-27 Eric Blossom - - * src/db_base.py (db_base.i_and_q_swapped): new method for - Flex 400 Rx and other boards that route I into ADC 1 instead of 0. - - * src/usrp.py (tune): added tune fct. Reworked subdev_spec. No - longer accepts (0|1, None). Check for and handle i_and_q_swapped. - -2005-09-21 Eric Blossom - - * src/db_basic.py: new. - * src/db_instantiator.py, src/usrp.py: added framework for - automatically instantiating daughterboard subclasses. - - * src/usrp1.i, src/usrp1_sink_base.{h,cc}, - src/usrp1_source_base.{h,cc}: deprecated adc_freq(), dac_freq(), - recommend converter_rate(). - -2005-09-17 Eric Blossom - - * src/db_dbs_rx.py: renamed from dbs_rx.py - * src/db_flexrf.py: renamed from flexrf.py - * src/db_tv_rx.py: renamed from tv_rx.py - * src/db_base.py: renamed from daughterboard_base.py - -2005-08-28 Eric Blossom - - * src/flexrf.py: added hook to invoke debugging gui. - * src/flexrf_debug_gui.py: new debugging tool. - -2005-07-19 Eric Blossom - - * src/usrp1_source_base.{h,cc}, src/usrp1.i: new method: set_ddc_phase. - -2005-07-02 Eric Blossom - - * config/gr_no_undefined.m4, config/gr_x86_64.m4: new, x86_64 support. - * config/gr_python.m4: backed out search for libpython, making - x86_64 work and breaking Cygwin/MinGW. - * configure.ac, src/Makefile.am: mods for x86_64, $(NO_UNDEFINED) - -2005-06-09 Eric Blossom - - * src/gen_usrp_dbids.py: new. Generate usrp_dbids.py from - usrp_daughterboards.h. This file contains symbolic names for for - daughterboard ID's. - -2005-05-18 Eric Blossom - - * src/usrp1_sink_base.{h,cc}, src/usrp1_source_base.{h,cc}: use - new start/stop methods. - -2005-05-09 Stephane Fillod - - * config/gr_sysv_shm.m4: SysV shared memory not mandatory - * config/gr_pwin32.m4, config/gr_python.m4, config/lf_cxx.m4: - fixes for Cygwin, MinGW - -2005-03-29 Eric Blossom - - * src/usrp.py: now check for usrp version at open time, not import - time. - -2005-03-15 Eric Blossom - - * src/usrp1_sink_base.{h,cc}, src/usrp1_source_base.{h,cc}: - read_aux_dac and write_aux_dac now take which_dboard instead of slot. - -2005-03-13 Matt Ettus - - * src/Makefile.am, src/tv_rx.py: first cut at TV RX dboard - * src/dbs_rx.py: minor fixes - -2005-03-11 Eric Blossom - - * src/usrp1_sink_base.{h,cc},src/usrp1_source_base.{h,cc}: new - methods: set_adc_offset, set_dac_offset, set_adc_buffer_bypass. - -2005-02-18 Eric Blossom - - * src/usrp1_sink_base.cc (_write_oe): fix delegation. - * src/usrp1_source_base.cc (_write_oe): fix delegation. - -2005-02-16 Eric Blossom - - * src/dbs_rx.py: new. control DBS_RX daughterboard. - * src/usrp1_{sink,source}_base.{h,cc}: add read_i2c and write_i2c. - -2005-02-06 Eric Blossom - - * configure.ac: upped rev to 0.4 for release. - * src/Makefile.am: backed out dependency on libpython - -2005-01-28 Stephane Fillod - - * src/Makefile.am: fixes for MinGW. - -2005-01-12 Eric Blossom - - * src/usrp1_sink_base.cc,src/usrp1_source_base.cc: changed - under/overrun diagnostic indicator to "uU" and "uO" to reduce - amount of diagnostic output. - -2005-01-10 Eric Blossom - - * src/usrp1.i,src/usrp1_sink_base.{h,cc}, - src/usrp1_source_base.{h,cc}: new methods to control all knobs. - -2005-01-04 Eric Blossom - - * src/usrp1.i,src/usrp1_source_base.{h,cc}: new methods for - messing with Rx PGA. - -2004-11-14 Eric Blossom - - * src/usrp1_sink_base.cc (work): corrected increment of obi. - -2004-10-13 Eric Blossom - - * configure.ac: upped rev to 0.2cvs - -2004-10-11 Eric Blossom - - * configure.ac: bumped rev to 0.2, make release. - * Makefile.am (EXTRA_DIST): added config.h.in - -2004-09-30 Eric Blossom - - * src/usrp1_sink_base.{h,cc}, src/usrp1_source_base.{h,cc}, - src/usrp1.i: new methods for reading and writing aux dac and adc, - eeproms, and fpga registers. - -2004-09-23 Eric Blossom - - * config/usrp_fusb_tech.m4, config/bnv_have_qt.m4, config/cppunit.m4, - config/gr_check_mc4020.m4, config/gr_check_usrp.m4, config/gr_doxygen.m4, - config/gr_gprof.m4, config/gr_scripting.m4, config/gr_set_md_cpu.m4, - config/pkg.m4, config/usrp_fusb_tech.m4: added additional quoting - to first arg of AC_DEFUN to silence automake warning. - -2004-08-19 Eric Blossom - - * src/usrp1_{sink,source}_base.{h,cc}, src/usrp1.i: new method: set_verbose. - -2004-08-03 Eric Blossom - - * src/usrp1_source_base.{h,cc}, src/usrp1_sink_base.{h,cc}: - extracted base class that handles everything but the packing and - unpacking of data into the usrp buffer. - * src/usrp1_source_c.{h,cc}, src/usrp1_sink_c.{h,cc}: revised to - use new base class. - * src/usrp1_source_s.{h,cc}, src/usrp1_sink_s.{h,cc}: new. - - -2004-07-31 Eric Blossom - - * src/usrp1_{sink,source}_c.{h,cc}: new method: set_loopback - * src/usrp1.i: new method: set_loopback - -2004-07-30 Eric Blossom - - * src/usrp1_source_c.{h,cc}: renamed from usrp_source_c.{h,cc} - * src/usrp1_sink_c.{h,cc}: renamed from usrp_sink_c.{h,cc} - * src/usrp1.i: renamed from usrp.i - * src/usrp.py: new. Binds proper class depending on hardware found. - - -2004-07-29 Eric Blossom - - * src/usrp_{sink,source}_c.h: doc fix. - * src/usrp0.i: new - * src/usrp0_source_c.{h,cc}: new - * src/usrp0_sink_c.{h,cc}: new - -2004-07-12 Eric Blossom - - * configure.ac: upped rev to 0.1cvs - -2004-07-08 Eric Blossom - - * src/usrp_source_c.{h,cc}: new. - -# -# Copyright 2004,2005,2006 Free Software Foundation, Inc. -# -# This file is part of GNU Radio -# -# GNU Radio is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. -# -# GNU Radio is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Radio; see the file COPYING. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, -# Boston, MA 02110-1301, USA. -# -- cgit